108 lines
4.9 KiB
C
108 lines
4.9 KiB
C
/*
|
|
gcode.h - rs274/ngc parser.
|
|
Part of Grbl
|
|
|
|
The MIT License (MIT)
|
|
|
|
GRBL(tm) - Embedded CNC g-code interpreter and motion-controller
|
|
Copyright (c) 2009-2011 Simen Svale Skogsrud
|
|
Copyright (c) 2011-2012 Sungeun K. Jeon
|
|
|
|
Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
of this software and associated documentation files (the "Software"), to deal
|
|
in the Software without restriction, including without limitation the rights
|
|
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
copies of the Software, and to permit persons to whom the Software is
|
|
furnished to do so, subject to the following conditions:
|
|
|
|
The above copyright notice and this permission notice shall be included in
|
|
all copies or substantial portions of the Software.
|
|
|
|
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
THE SOFTWARE.
|
|
*/
|
|
|
|
#ifndef gcode_h
|
|
#define gcode_h
|
|
#include <avr/io.h>
|
|
#include "nuts_bolts.h"
|
|
|
|
// Define modal group internal numbers for checking multiple command violations and tracking the
|
|
// type of command that is called in the block. A modal group is a group of g-code commands that are
|
|
// mutually exclusive, or cannot exist on the same line, because they each toggle a state or execute
|
|
// a unique motion. These are defined in the NIST RS274-NGC v3 g-code standard, available online,
|
|
// and are similar/identical to other g-code interpreters by manufacturers (Haas,Fanuc,Mazak,etc).
|
|
#define MODAL_GROUP_NONE 0
|
|
#define MODAL_GROUP_0 1 // [G4,G10,G28,G30,G53,G92,G92.1] Non-modal
|
|
#define MODAL_GROUP_1 2 // [G0,G1,G2,G3,G80] Motion
|
|
#define MODAL_GROUP_2 3 // [G17,G18,G19] Plane selection
|
|
#define MODAL_GROUP_3 4 // [G90,G91] Distance mode
|
|
#define MODAL_GROUP_4 5 // [M0,M1,M2,M30] Stopping
|
|
#define MODAL_GROUP_5 6 // [G93,G94] Feed rate mode
|
|
#define MODAL_GROUP_6 7 // [G20,G21] Units
|
|
#define MODAL_GROUP_7 8 // [M3,M4,M5] Spindle turning
|
|
#define MODAL_GROUP_12 9 // [G54,G55,G56,G57,G58,G59] Coordinate system selection
|
|
|
|
// Define command actions for within execution-type modal groups (motion, stopping, non-modal). Used
|
|
// internally by the parser to know which command to execute.
|
|
#define MOTION_MODE_SEEK 0 // G0
|
|
#define MOTION_MODE_LINEAR 1 // G1
|
|
#define MOTION_MODE_CW_ARC 2 // G2
|
|
#define MOTION_MODE_CCW_ARC 3 // G3
|
|
#define MOTION_MODE_CANCEL 4 // G80
|
|
|
|
#define PROGRAM_FLOW_RUNNING 0
|
|
#define PROGRAM_FLOW_PAUSED 1 // M0, M1
|
|
#define PROGRAM_FLOW_COMPLETED 2 // M2, M30
|
|
|
|
#define NON_MODAL_NONE 0
|
|
#define NON_MODAL_DWELL 1 // G4
|
|
#define NON_MODAL_SET_COORDINATE_DATA 2 // G10
|
|
#define NON_MODAL_GO_HOME_0 3 // G28
|
|
#define NON_MODAL_SET_HOME_0 4 // G28.1
|
|
#define NON_MODAL_GO_HOME_1 5 // G30
|
|
#define NON_MODAL_SET_HOME_1 6 // G30.1
|
|
#define NON_MODAL_SET_COORDINATE_OFFSET 7 // G92
|
|
#define NON_MODAL_RESET_COORDINATE_OFFSET 8 //G92.1
|
|
|
|
typedef struct {
|
|
uint8_t status_code; // Parser status for current block
|
|
uint8_t motion_mode; // {G0, G1, G2, G3, G80}
|
|
uint8_t inverse_feed_rate_mode; // {G93, G94}
|
|
uint8_t inches_mode; // 0 = millimeter mode, 1 = inches mode {G20, G21}
|
|
uint8_t absolute_mode; // 0 = relative motion, 1 = absolute motion {G90, G91}
|
|
uint8_t program_flow; // {M0, M1, M2, M30}
|
|
int8_t spindle_direction; // 1 = CW, -1 = CCW, 0 = Stop {M3, M4, M5}
|
|
uint8_t coolant_mode; // 0 = Disable, 1 = Flood Enable {M8, M9}
|
|
float feed_rate; // Millimeters/min
|
|
// float seek_rate; // Millimeters/min. Will be used in v0.9 when axis independence is installed
|
|
float position[3]; // Where the interpreter considers the tool to be at this point in the code
|
|
uint8_t tool;
|
|
// uint16_t spindle_speed; // RPM/100
|
|
uint8_t plane_axis_0,
|
|
plane_axis_1,
|
|
plane_axis_2; // The axes of the selected plane
|
|
uint8_t coord_select; // Active work coordinate system number. Default: 0=G54.
|
|
float coord_system[N_AXIS]; // Current work coordinate system (G54+). Stores offset from absolute machine
|
|
// position in mm. Loaded from EEPROM when called.
|
|
float coord_offset[N_AXIS]; // Retains the G92 coordinate offset (work coordinates) relative to
|
|
// machine zero in mm. Non-persistent. Cleared upon reset and boot.
|
|
} parser_state_t;
|
|
extern parser_state_t gc;
|
|
|
|
// Initialize the parser
|
|
void gc_init();
|
|
|
|
// Execute one block of rs275/ngc/g-code
|
|
uint8_t gc_execute_line(char *line);
|
|
|
|
// Set g-code parser position. Input in steps.
|
|
void gc_set_current_position(int32_t x, int32_t y, int32_t z);
|
|
|
|
#endif
|