9ba117c1bb
- Brand-new stepper algorithm. Based on the Pramod Ranade inverse time algorithm, but modified to ensure step events are exact. Currently limited to about 15kHz step rates, much more to be done to enable 30kHz again. - Removed Timer1. Stepper algorithm now uses Timer0 and Timer2. - Much improved step generation during accelerations. Smoother. Allows much higher accelerations (and speeds) than before on the same machine. - Cleaner algorithm that is more easily portable to other CPU types. - Streamlined planner calculations. Removed accelerate_until and final_rate variables from block buffer since the new stepper algorithm is that much more accurate. - Improved planner efficiency by about 15-20% during worst case scenarios (arcs). - New config.h options to tune new stepper algorithm.
111 lines
4.6 KiB
C
111 lines
4.6 KiB
C
/*
|
|
nuts_bolts.h - Header file for shared definitions, variables, and functions
|
|
Part of Grbl
|
|
|
|
Copyright (c) 2009-2011 Simen Svale Skogsrud
|
|
Copyright (c) 2011-2012 Sungeun K. Jeon
|
|
|
|
Grbl is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Grbl is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef nuts_bolts_h
|
|
#define nuts_bolts_h
|
|
|
|
#include <string.h>
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
#include "config.h"
|
|
#include "defaults.h"
|
|
|
|
#define false 0
|
|
#define true 1
|
|
|
|
#define N_AXIS 3 // Number of axes
|
|
#define X_AXIS 0 // Axis indexing value
|
|
#define Y_AXIS 1
|
|
#define Z_AXIS 2
|
|
|
|
#define MM_PER_INCH (25.40)
|
|
#define INCH_PER_MM (0.0393701)
|
|
|
|
#define TICKS_PER_MICROSECOND (F_CPU/1000000)
|
|
|
|
// Useful macros
|
|
#define clear_vector(a) memset(a, 0, sizeof(a))
|
|
#define clear_vector_float(a) memset(a, 0.0, sizeof(float)*N_AXIS)
|
|
#define max(a,b) (((a) > (b)) ? (a) : (b))
|
|
#define min(a,b) (((a) < (b)) ? (a) : (b))
|
|
|
|
// Bit field and masking macros
|
|
#define bit(n) (1 << n)
|
|
#define bit_true(x,mask) (x |= mask)
|
|
#define bit_false(x,mask) (x &= ~mask)
|
|
#define bit_toggle(x,mask) (x ^= mask)
|
|
#define bit_istrue(x,mask) ((x & mask) != 0)
|
|
#define bit_isfalse(x,mask) ((x & mask) == 0)
|
|
|
|
// Define system executor bit map. Used internally by runtime protocol as runtime command flags,
|
|
// which notifies the main program to execute the specified runtime command asynchronously.
|
|
// NOTE: The system executor uses an unsigned 8-bit volatile variable (8 flag limit.) The default
|
|
// flags are always false, so the runtime protocol only needs to check for a non-zero value to
|
|
// know when there is a runtime command to execute.
|
|
#define EXEC_STATUS_REPORT bit(0) // bitmask 00000001
|
|
#define EXEC_CYCLE_START bit(1) // bitmask 00000010
|
|
#define EXEC_CYCLE_STOP bit(2) // bitmask 00000100
|
|
#define EXEC_FEED_HOLD bit(3) // bitmask 00001000
|
|
#define EXEC_RESET bit(4) // bitmask 00010000
|
|
#define EXEC_ALARM bit(5) // bitmask 00100000
|
|
#define EXEC_CRIT_EVENT bit(6) // bitmask 01000000
|
|
// #define bit(7) // bitmask 10000000
|
|
|
|
// Define system state bit map. The state variable primarily tracks the individual functions
|
|
// of Grbl to manage each without overlapping. It is also used as a messaging flag for
|
|
// critical events.
|
|
#define STATE_IDLE 0 // Must be zero.
|
|
#define STATE_INIT 1 // Initial power up state.
|
|
#define STATE_QUEUED 2 // Indicates buffered blocks, awaiting cycle start.
|
|
#define STATE_CYCLE 3 // Cycle is running
|
|
#define STATE_HOLD 4 // Executing feed hold
|
|
#define STATE_HOMING 5 // Performing homing cycle
|
|
#define STATE_ALARM 6 // In alarm state. Locks out all g-code processes. Allows settings access.
|
|
#define STATE_CHECK_MODE 7 // G-code check mode. Locks out planner and motion only.
|
|
// #define STATE_JOG 8 // Jogging mode is unique like homing.
|
|
|
|
// Define global system variables
|
|
typedef struct {
|
|
uint8_t abort; // System abort flag. Forces exit back to main loop for reset.
|
|
uint8_t state; // Tracks the current state of Grbl.
|
|
volatile uint8_t execute; // Global system runtime executor bitflag variable. See EXEC bitmasks.
|
|
int32_t position[N_AXIS]; // Real-time machine (aka home) position vector in steps.
|
|
// NOTE: This may need to be a volatile variable, if problems arise.
|
|
uint8_t auto_start; // Planner auto-start flag. Toggled off during feed hold. Defaulted by settings.
|
|
} system_t;
|
|
extern system_t sys;
|
|
|
|
// Read a floating point value from a string. Line points to the input buffer, char_counter
|
|
// is the indexer pointing to the current character of the line, while float_ptr is
|
|
// a pointer to the result variable. Returns true when it succeeds
|
|
int read_float(char *line, uint8_t *char_counter, float *float_ptr);
|
|
|
|
// Delays variable-defined milliseconds. Compiler compatibility fix for _delay_ms().
|
|
void delay_ms(uint16_t ms);
|
|
|
|
// Delays variable-defined microseconds. Compiler compatibility fix for _delay_us().
|
|
void delay_us(uint32_t us);
|
|
|
|
// Syncs Grbl's gcode and planner position variables with the system position.
|
|
void sys_sync_current_position();
|
|
|
|
#endif
|