85b0c7a8b4
- G91.1 support added. This g-code sets the arc IJK distance mode to incremental, which is the default already. This simply helps reduce parsing errors with certain CAM programs that output this command. - Max step rate checks weren’t being compiled in if the option was enabled. Fixed now. - Alarm codes were not displaying correctly when GUI reporting mode was enabled. Due to unsigned int problem. Changed codes to positive values since they aren’t shared with other codes.
334 lines
12 KiB
C
334 lines
12 KiB
C
/*
|
|
settings.c - eeprom configuration handling
|
|
Part of Grbl
|
|
|
|
Copyright (c) 2011-2015 Sungeun K. Jeon
|
|
Copyright (c) 2009-2011 Simen Svale Skogsrud
|
|
|
|
Grbl is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Grbl is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "grbl.h"
|
|
|
|
settings_t settings;
|
|
|
|
|
|
// Method to store startup lines into EEPROM
|
|
void settings_store_startup_line(uint8_t n, char *line)
|
|
{
|
|
uint32_t addr = n*(LINE_BUFFER_SIZE+1)+EEPROM_ADDR_STARTUP_BLOCK;
|
|
memcpy_to_eeprom_with_checksum(addr,(char*)line, LINE_BUFFER_SIZE);
|
|
}
|
|
|
|
|
|
// Method to store build info into EEPROM
|
|
void settings_store_build_info(char *line)
|
|
{
|
|
memcpy_to_eeprom_with_checksum(EEPROM_ADDR_BUILD_INFO,(char*)line, LINE_BUFFER_SIZE);
|
|
}
|
|
|
|
|
|
// Method to store coord data parameters into EEPROM
|
|
void settings_write_coord_data(uint8_t coord_select, float *coord_data)
|
|
{
|
|
uint32_t addr = coord_select*(sizeof(float)*N_AXIS+1) + EEPROM_ADDR_PARAMETERS;
|
|
memcpy_to_eeprom_with_checksum(addr,(char*)coord_data, sizeof(float)*N_AXIS);
|
|
}
|
|
|
|
|
|
// Method to store Grbl global settings struct and version number into EEPROM
|
|
void write_global_settings()
|
|
{
|
|
eeprom_put_char(0, SETTINGS_VERSION);
|
|
memcpy_to_eeprom_with_checksum(EEPROM_ADDR_GLOBAL, (char*)&settings, sizeof(settings_t));
|
|
}
|
|
|
|
|
|
// Method to restore EEPROM-saved Grbl global settings back to defaults.
|
|
void settings_restore_global_settings() {
|
|
settings.pulse_microseconds = DEFAULT_STEP_PULSE_MICROSECONDS;
|
|
settings.stepper_idle_lock_time = DEFAULT_STEPPER_IDLE_LOCK_TIME;
|
|
settings.step_invert_mask = DEFAULT_STEPPING_INVERT_MASK;
|
|
settings.dir_invert_mask = DEFAULT_DIRECTION_INVERT_MASK;
|
|
settings.status_report_mask = DEFAULT_STATUS_REPORT_MASK;
|
|
settings.junction_deviation = DEFAULT_JUNCTION_DEVIATION;
|
|
settings.arc_tolerance = DEFAULT_ARC_TOLERANCE;
|
|
settings.homing_dir_mask = DEFAULT_HOMING_DIR_MASK;
|
|
settings.homing_feed_rate = DEFAULT_HOMING_FEED_RATE;
|
|
settings.homing_seek_rate = DEFAULT_HOMING_SEEK_RATE;
|
|
settings.homing_debounce_delay = DEFAULT_HOMING_DEBOUNCE_DELAY;
|
|
settings.homing_pulloff = DEFAULT_HOMING_PULLOFF;
|
|
|
|
settings.flags = 0;
|
|
if (DEFAULT_REPORT_INCHES) { settings.flags |= BITFLAG_REPORT_INCHES; }
|
|
if (DEFAULT_INVERT_ST_ENABLE) { settings.flags |= BITFLAG_INVERT_ST_ENABLE; }
|
|
if (DEFAULT_INVERT_LIMIT_PINS) { settings.flags |= BITFLAG_INVERT_LIMIT_PINS; }
|
|
if (DEFAULT_SOFT_LIMIT_ENABLE) { settings.flags |= BITFLAG_SOFT_LIMIT_ENABLE; }
|
|
if (DEFAULT_HARD_LIMIT_ENABLE) { settings.flags |= BITFLAG_HARD_LIMIT_ENABLE; }
|
|
if (DEFAULT_HOMING_ENABLE) { settings.flags |= BITFLAG_HOMING_ENABLE; }
|
|
|
|
settings.steps_per_mm[X_AXIS] = DEFAULT_X_STEPS_PER_MM;
|
|
settings.steps_per_mm[Y_AXIS] = DEFAULT_Y_STEPS_PER_MM;
|
|
settings.steps_per_mm[Z_AXIS] = DEFAULT_Z_STEPS_PER_MM;
|
|
settings.max_rate[X_AXIS] = DEFAULT_X_MAX_RATE;
|
|
settings.max_rate[Y_AXIS] = DEFAULT_Y_MAX_RATE;
|
|
settings.max_rate[Z_AXIS] = DEFAULT_Z_MAX_RATE;
|
|
settings.acceleration[X_AXIS] = DEFAULT_X_ACCELERATION;
|
|
settings.acceleration[Y_AXIS] = DEFAULT_Y_ACCELERATION;
|
|
settings.acceleration[Z_AXIS] = DEFAULT_Z_ACCELERATION;
|
|
settings.max_travel[X_AXIS] = (-DEFAULT_X_MAX_TRAVEL);
|
|
settings.max_travel[Y_AXIS] = (-DEFAULT_Y_MAX_TRAVEL);
|
|
settings.max_travel[Z_AXIS] = (-DEFAULT_Z_MAX_TRAVEL);
|
|
|
|
write_global_settings();
|
|
}
|
|
|
|
|
|
// Helper function to clear the EEPROM space containing parameter data.
|
|
void settings_clear_parameters() {
|
|
uint8_t idx;
|
|
float coord_data[N_AXIS];
|
|
memset(&coord_data, 0, sizeof(coord_data));
|
|
for (idx=0; idx < SETTING_INDEX_NCOORD; idx++) { settings_write_coord_data(idx, coord_data); }
|
|
}
|
|
|
|
|
|
// Helper function to clear the EEPROM space containing the startup lines.
|
|
void settings_clear_startup_lines() {
|
|
#if N_STARTUP_LINE > 0
|
|
eeprom_put_char(EEPROM_ADDR_STARTUP_BLOCK, 0);
|
|
#endif
|
|
#if N_STARTUP_LINE > 1
|
|
eeprom_put_char(EEPROM_ADDR_STARTUP_BLOCK+(LINE_BUFFER_SIZE+1), 0);
|
|
#endif
|
|
}
|
|
|
|
|
|
// Helper function to clear the EEPROM space containing the user build info string.
|
|
void settings_clear_build_info() { eeprom_put_char(EEPROM_ADDR_BUILD_INFO , 0); }
|
|
|
|
|
|
// Reads startup line from EEPROM. Updated pointed line string data.
|
|
uint8_t settings_read_startup_line(uint8_t n, char *line)
|
|
{
|
|
uint32_t addr = n*(LINE_BUFFER_SIZE+1)+EEPROM_ADDR_STARTUP_BLOCK;
|
|
if (!(memcpy_from_eeprom_with_checksum((char*)line, addr, LINE_BUFFER_SIZE))) {
|
|
// Reset line with default value
|
|
line[0] = 0; // Empty line
|
|
settings_store_startup_line(n, line);
|
|
return(false);
|
|
}
|
|
return(true);
|
|
}
|
|
|
|
|
|
// Reads startup line from EEPROM. Updated pointed line string data.
|
|
uint8_t settings_read_build_info(char *line)
|
|
{
|
|
if (!(memcpy_from_eeprom_with_checksum((char*)line, EEPROM_ADDR_BUILD_INFO, LINE_BUFFER_SIZE))) {
|
|
// Reset line with default value
|
|
line[0] = 0; // Empty line
|
|
settings_store_build_info(line);
|
|
return(false);
|
|
}
|
|
return(true);
|
|
}
|
|
|
|
|
|
// Read selected coordinate data from EEPROM. Updates pointed coord_data value.
|
|
uint8_t settings_read_coord_data(uint8_t coord_select, float *coord_data)
|
|
{
|
|
uint32_t addr = coord_select*(sizeof(float)*N_AXIS+1) + EEPROM_ADDR_PARAMETERS;
|
|
if (!(memcpy_from_eeprom_with_checksum((char*)coord_data, addr, sizeof(float)*N_AXIS))) {
|
|
// Reset with default zero vector
|
|
clear_vector_float(coord_data);
|
|
settings_write_coord_data(coord_select,coord_data);
|
|
return(false);
|
|
}
|
|
return(true);
|
|
}
|
|
|
|
|
|
// Reads Grbl global settings struct from EEPROM.
|
|
uint8_t read_global_settings() {
|
|
// Check version-byte of eeprom
|
|
uint8_t version = eeprom_get_char(0);
|
|
if (version == SETTINGS_VERSION) {
|
|
// Read settings-record and check checksum
|
|
if (!(memcpy_from_eeprom_with_checksum((char*)&settings, EEPROM_ADDR_GLOBAL, sizeof(settings_t)))) {
|
|
return(false);
|
|
}
|
|
} else {
|
|
return(false);
|
|
}
|
|
return(true);
|
|
}
|
|
|
|
|
|
// A helper method to set settings from command line
|
|
uint8_t settings_store_global_setting(uint8_t parameter, float value) {
|
|
if (value < 0.0) { return(STATUS_NEGATIVE_VALUE); }
|
|
if (parameter >= AXIS_SETTINGS_START_VAL) {
|
|
// Store axis configuration. Axis numbering sequence set by AXIS_SETTING defines.
|
|
// NOTE: Ensure the setting index corresponds to the report.c settings printout.
|
|
parameter -= AXIS_SETTINGS_START_VAL;
|
|
uint8_t set_idx = 0;
|
|
while (set_idx < AXIS_N_SETTINGS) {
|
|
if (parameter < N_AXIS) {
|
|
// Valid axis setting found.
|
|
switch (set_idx) {
|
|
case 0:
|
|
#ifdef MAX_STEP_RATE_HZ
|
|
if (value*settings.max_rate[parameter] > (MAX_STEP_RATE_HZ*60.0)) { return(STATUS_MAX_STEP_RATE_EXCEEDED); }
|
|
#endif
|
|
settings.steps_per_mm[parameter] = value;
|
|
break;
|
|
case 1:
|
|
#ifdef MAX_STEP_RATE_HZ
|
|
if (value*settings.steps_per_mm[parameter] > (MAX_STEP_RATE_HZ*60.0)) { return(STATUS_MAX_STEP_RATE_EXCEEDED); }
|
|
#endif
|
|
settings.max_rate[parameter] = value;
|
|
break;
|
|
case 2: settings.acceleration[parameter] = value*60*60; break; // Convert to mm/min^2 for grbl internal use.
|
|
case 3: settings.max_travel[parameter] = -value; break; // Store as negative for grbl internal use.
|
|
}
|
|
break; // Exit while-loop after setting has been configured and proceed to the EEPROM write call.
|
|
} else {
|
|
set_idx++;
|
|
// If axis index greater than N_AXIS or setting index greater than number of axis settings, error out.
|
|
if ((parameter < AXIS_SETTINGS_INCREMENT) || (set_idx == AXIS_N_SETTINGS)) { return(STATUS_INVALID_STATEMENT); }
|
|
parameter -= AXIS_SETTINGS_INCREMENT;
|
|
}
|
|
}
|
|
} else {
|
|
// Store non-axis Grbl settings
|
|
uint8_t int_value = trunc(value);
|
|
switch(parameter) {
|
|
case 0:
|
|
if (int_value < 3) { return(STATUS_SETTING_STEP_PULSE_MIN); }
|
|
settings.pulse_microseconds = int_value; break;
|
|
case 1: settings.stepper_idle_lock_time = int_value; break;
|
|
case 2:
|
|
settings.step_invert_mask = int_value;
|
|
st_generate_step_dir_invert_masks(); // Regenerate step and direction port invert masks.
|
|
break;
|
|
case 3:
|
|
settings.dir_invert_mask = int_value;
|
|
st_generate_step_dir_invert_masks(); // Regenerate step and direction port invert masks.
|
|
break;
|
|
case 4: // Reset to ensure change. Immediate re-init may cause problems.
|
|
if (int_value) { settings.flags |= BITFLAG_INVERT_ST_ENABLE; }
|
|
else { settings.flags &= ~BITFLAG_INVERT_ST_ENABLE; }
|
|
break;
|
|
case 5: // Reset to ensure change. Immediate re-init may cause problems.
|
|
if (int_value) { settings.flags |= BITFLAG_INVERT_LIMIT_PINS; }
|
|
else { settings.flags &= ~BITFLAG_INVERT_LIMIT_PINS; }
|
|
break;
|
|
case 6: // Reset to ensure change. Immediate re-init may cause problems.
|
|
if (int_value) { settings.flags |= BITFLAG_INVERT_PROBE_PIN; }
|
|
else { settings.flags &= ~BITFLAG_INVERT_PROBE_PIN; }
|
|
break;
|
|
case 10: settings.status_report_mask = int_value; break;
|
|
case 11: settings.junction_deviation = value; break;
|
|
case 12: settings.arc_tolerance = value; break;
|
|
case 13:
|
|
if (int_value) { settings.flags |= BITFLAG_REPORT_INCHES; }
|
|
else { settings.flags &= ~BITFLAG_REPORT_INCHES; }
|
|
break;
|
|
case 20:
|
|
if (int_value) {
|
|
if (bit_isfalse(settings.flags, BITFLAG_HOMING_ENABLE)) { return(STATUS_SOFT_LIMIT_ERROR); }
|
|
settings.flags |= BITFLAG_SOFT_LIMIT_ENABLE;
|
|
} else { settings.flags &= ~BITFLAG_SOFT_LIMIT_ENABLE; }
|
|
break;
|
|
case 21:
|
|
if (int_value) { settings.flags |= BITFLAG_HARD_LIMIT_ENABLE; }
|
|
else { settings.flags &= ~BITFLAG_HARD_LIMIT_ENABLE; }
|
|
limits_init(); // Re-init to immediately change. NOTE: Nice to have but could be problematic later.
|
|
break;
|
|
case 22:
|
|
if (int_value) { settings.flags |= BITFLAG_HOMING_ENABLE; }
|
|
else {
|
|
settings.flags &= ~BITFLAG_HOMING_ENABLE;
|
|
settings.flags &= ~BITFLAG_SOFT_LIMIT_ENABLE; // Force disable soft-limits.
|
|
}
|
|
break;
|
|
case 23: settings.homing_dir_mask = int_value; break;
|
|
case 24: settings.homing_feed_rate = value; break;
|
|
case 25: settings.homing_seek_rate = value; break;
|
|
case 26: settings.homing_debounce_delay = int_value; break;
|
|
case 27: settings.homing_pulloff = value; break;
|
|
default:
|
|
return(STATUS_INVALID_STATEMENT);
|
|
}
|
|
}
|
|
write_global_settings();
|
|
return(STATUS_OK);
|
|
}
|
|
|
|
|
|
// Initialize the config subsystem
|
|
void settings_init() {
|
|
if(!read_global_settings()) {
|
|
report_status_message(STATUS_SETTING_READ_FAIL);
|
|
|
|
settings_restore_global_settings();
|
|
|
|
// Force clear startup lines and build info user data. Parameters should be ok.
|
|
// TODO: For next version, remove these clears. Only here because line buffer increased.
|
|
settings_clear_startup_lines();
|
|
settings_clear_build_info();
|
|
|
|
report_grbl_settings();
|
|
}
|
|
|
|
// Check all parameter data into a dummy variable. If error, reset to zero, otherwise do nothing.
|
|
float coord_data[N_AXIS];
|
|
uint8_t i;
|
|
for (i=0; i<=SETTING_INDEX_NCOORD; i++) {
|
|
if (!settings_read_coord_data(i, coord_data)) {
|
|
report_status_message(STATUS_SETTING_READ_FAIL);
|
|
}
|
|
}
|
|
// NOTE: Startup lines are checked and executed by protocol_main_loop at the end of initialization.
|
|
// TODO: Build info should be checked here, but will wait until v1.0 to address this. Ok for now.
|
|
}
|
|
|
|
|
|
// Returns step pin mask according to Grbl internal axis indexing.
|
|
uint8_t get_step_pin_mask(uint8_t axis_idx)
|
|
{
|
|
if ( axis_idx == X_AXIS ) { return((1<<X_STEP_BIT)); }
|
|
if ( axis_idx == Y_AXIS ) { return((1<<Y_STEP_BIT)); }
|
|
return((1<<Z_STEP_BIT));
|
|
}
|
|
|
|
|
|
// Returns direction pin mask according to Grbl internal axis indexing.
|
|
uint8_t get_direction_pin_mask(uint8_t axis_idx)
|
|
{
|
|
if ( axis_idx == X_AXIS ) { return((1<<X_DIRECTION_BIT)); }
|
|
if ( axis_idx == Y_AXIS ) { return((1<<Y_DIRECTION_BIT)); }
|
|
return((1<<Z_DIRECTION_BIT));
|
|
}
|
|
|
|
|
|
// Returns limit pin mask according to Grbl internal axis indexing.
|
|
uint8_t get_limit_pin_mask(uint8_t axis_idx)
|
|
{
|
|
if ( axis_idx == X_AXIS ) { return((1<<X_LIMIT_BIT)); }
|
|
if ( axis_idx == Y_AXIS ) { return((1<<Y_LIMIT_BIT)); }
|
|
return((1<<Z_LIMIT_BIT));
|
|
}
|