110faae986
- Serial functions contained quite a few modulo operations that would be executed with high frequency when streaming. AVR processors are very slow when operating these. In one test on the Arduino forums, it showed about a 15x slow down compared to a simple if-then statement. - Clarified some variable names and types and comments.
54 lines
2.1 KiB
C
54 lines
2.1 KiB
C
/*
|
|
motion_control.h - high level interface for issuing motion commands
|
|
Part of Grbl
|
|
|
|
Copyright (c) 2009-2011 Simen Svale Skogsrud
|
|
Copyright (c) 2011 Sungeun K. Jeon
|
|
|
|
Grbl is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Grbl is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef motion_control_h
|
|
#define motion_control_h
|
|
|
|
#include <avr/io.h>
|
|
#include "planner.h"
|
|
|
|
// NOTE: Although the following functions structurally belongs in this module, there is nothing to do but
|
|
// to forward the request to the planner.
|
|
|
|
// Execute linear motion in absolute millimeter coordinates. Feed rate given in millimeters/second
|
|
// unless invert_feed_rate is true. Then the feed_rate means that the motion should be completed in
|
|
// (1 minute)/feed_rate time.
|
|
#define mc_line(x, y, z, feed_rate, invert_feed_rate) plan_buffer_line(x, y, z, feed_rate, invert_feed_rate)
|
|
|
|
#define mc_set_current_position(x, y, z) plan_set_current_position(x, y, z)
|
|
|
|
#ifdef __AVR_ATmega328P__
|
|
// Execute an arc in offset mode format. position == current xyz, target == target xyz,
|
|
// offset == offset from current xyz, axis_XXX defines circle plane in tool space, axis_linear is
|
|
// the direction of helical travel, radius == circle radius, isclockwise boolean. Used
|
|
// for vector transformation direction.
|
|
void mc_arc(double *position, double *target, double *offset, uint8_t axis_0, uint8_t axis_1,
|
|
uint8_t axis_linear, double feed_rate, uint8_t invert_feed_rate, double radius, uint8_t isclockwise);
|
|
#endif
|
|
|
|
// Dwell for a couple of time units
|
|
void mc_dwell(uint32_t milliseconds);
|
|
|
|
// Send the tool home (not implemented)
|
|
void mc_go_home();
|
|
|
|
#endif
|