1fd45791a5
- Changed line number integer types from unsigned to signed int32. G-code mandates values cannot exceed 99999. Negative values can be used to indicate certain modes. - Homing cycle line number changed to -1, as an indicator. - Fixed a reporting define for the spindle states that was broken by the last merge.
92 lines
3.8 KiB
C
92 lines
3.8 KiB
C
/*
|
|
planner.h - buffers movement commands and manages the acceleration profile plan
|
|
Part of Grbl
|
|
|
|
Copyright (c) 2011-2014 Sungeun K. Jeon
|
|
Copyright (c) 2009-2011 Simen Svale Skogsrud
|
|
|
|
Grbl is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Grbl is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef planner_h
|
|
#define planner_h
|
|
|
|
#include "system.h"
|
|
|
|
// The number of linear motions that can be in the plan at any give time
|
|
#ifndef BLOCK_BUFFER_SIZE
|
|
#ifdef USE_LINE_NUMBERS
|
|
#define BLOCK_BUFFER_SIZE 16
|
|
#else
|
|
#define BLOCK_BUFFER_SIZE 18
|
|
#endif
|
|
#endif
|
|
|
|
// This struct stores a linear movement of a g-code block motion with its critical "nominal" values
|
|
// are as specified in the source g-code.
|
|
typedef struct {
|
|
// Fields used by the bresenham algorithm for tracing the line
|
|
// NOTE: Used by stepper algorithm to execute the block correctly. Do not alter these values.
|
|
uint8_t direction_bits; // The direction bit set for this block (refers to *_DIRECTION_BIT in config.h)
|
|
uint32_t steps[N_AXIS]; // Step count along each axis
|
|
uint32_t step_event_count; // The maximum step axis count and number of steps required to complete this block.
|
|
|
|
// Fields used by the motion planner to manage acceleration
|
|
float entry_speed_sqr; // The current planned entry speed at block junction in (mm/min)^2
|
|
float max_entry_speed_sqr; // Maximum allowable entry speed based on the minimum of junction limit and
|
|
// neighboring nominal speeds with overrides in (mm/min)^2
|
|
float max_junction_speed_sqr; // Junction entry speed limit based on direction vectors in (mm/min)^2
|
|
float nominal_speed_sqr; // Axis-limit adjusted nominal speed for this block in (mm/min)^2
|
|
float acceleration; // Axis-limit adjusted line acceleration in (mm/min^2)
|
|
float millimeters; // The remaining distance for this block to be executed in (mm)
|
|
// uint8_t max_override; // Maximum override value based on axis speed limits
|
|
|
|
#ifdef USE_LINE_NUMBERS
|
|
int32_t line_number;
|
|
#endif
|
|
} plan_block_t;
|
|
|
|
|
|
// Initialize and reset the motion plan subsystem
|
|
void plan_reset();
|
|
|
|
// Add a new linear movement to the buffer. target[N_AXIS] is the signed, absolute target position
|
|
// in millimeters. Feed rate specifies the speed of the motion. If feed rate is inverted, the feed
|
|
// rate is taken to mean "frequency" and would complete the operation in 1/feed_rate minutes.
|
|
void plan_buffer_line(float *target, float feed_rate, uint8_t invert_feed_rate, int32_t line_number);
|
|
|
|
// Called when the current block is no longer needed. Discards the block and makes the memory
|
|
// availible for new blocks.
|
|
void plan_discard_current_block();
|
|
|
|
// Gets the current block. Returns NULL if buffer empty
|
|
plan_block_t *plan_get_current_block();
|
|
|
|
// Called periodically by step segment buffer. Mostly used internally by planner.
|
|
uint8_t plan_next_block_index(uint8_t block_index);
|
|
|
|
// Called by step segment buffer when computing executing block velocity profile.
|
|
float plan_get_exec_block_exit_speed();
|
|
|
|
// Reset the planner position vector (in steps)
|
|
void plan_sync_position();
|
|
|
|
// Reinitialize plan with a partially completed block
|
|
void plan_cycle_reinitialize();
|
|
|
|
// Returns the status of the block ring buffer. True, if buffer is full.
|
|
uint8_t plan_check_full_buffer();
|
|
|
|
#endif
|