|
|
c3fda5ac21
|
fixed a bug where the default step mask would not actually reflect the real pin out
|
2011-06-05 21:34:53 +02:00 |
|
|
|
9e09a502e9
|
updated readme to reflect real state of 168-compatibility
|
2011-06-05 21:12:56 +02:00 |
|
|
|
bd336867a6
|
changed default fp decimal places to 3
|
2011-06-05 20:58:21 +02:00 |
|
|
|
553c44a93f
|
Fixed serial.c after tests on real hardware
|
2011-06-05 20:54:23 +02:00 |
|
|
|
74db3e6c5b
|
undid changes to printIntegerInBase that resulted in the integers being printed in reverse...
|
2011-06-04 22:17:51 +02:00 |
|
|
|
903303579f
|
NOW printFloat probably works
|
2011-06-03 21:56:55 +02:00 |
|
|
|
a7c13c497a
|
a new printFloat that probably works
|
2011-06-03 21:56:18 +02:00 |
|
|
|
f0843db46e
|
refactored printIntegerInBase to work without a buffer + minor cleanup
|
2011-06-03 21:50:02 +02:00 |
|
|
|
69be1240be
|
refactored a complex comment
|
2011-06-03 15:43:14 +02:00 |
|
|
|
bfe7a2ad84
|
flossed the serial module
|
2011-06-03 15:42:28 +02:00 |
|
|
|
9488cb329c
|
cleaned up function definitions for serial and print modules and added a comment about the deeply flawed printFloat method
|
2011-06-03 15:36:14 +02:00 |
|
|
|
5eea9f4c7c
|
pruned extraneous comment
|
2011-06-03 15:33:56 +02:00 |
|
|
|
ab8bae74c1
|
pruned some undefined declarations from the print module
|
2011-06-03 15:33:12 +02:00 |
|
|
|
9a5fed4fda
|
changed file headers to reflect the totally refactored state of the serial and print modules
|
2011-06-03 15:31:59 +02:00 |
|
|
|
c0b4b8309a
|
cleaned up serial completing support for non blocking tx and refactoring formatting functions into a new module 'print'
|
2011-06-03 15:28:14 +02:00 |
|
|
|
8793b555e0
|
cleaned up data types in serial module, all data now uint8_t
|
2011-06-01 09:45:15 +02:00 |
|
|
|
ee3139d283
|
changed serialAvailable to serialAnyAvailable which does not calculate the number of bytes, only if there are any at all
|
2011-06-01 09:36:15 +02:00 |
|
|
|
defabc80ed
|
renamed wiring_serial to serial to reflect its complete remake
|
2011-05-31 22:45:38 +02:00 |
|
|
|
33a940cdf8
|
added asynchronous write as provided by Arthur Wolf
|
2011-05-31 22:29:50 +02:00 |
|
|
|
f4c1cbac3c
|
added a fix for division by zero errors that would occur on very low feed rates (thanks to Arthur Wolf for hardcore investigation)
|
2011-05-31 18:37:37 +02:00 |
|
|
|
a25812f36b
|
made inverted stepper driving the default as per the request of the Grbl Shield team and frankly myself. Who doesn't need their stepper signals inverted anyway?
|
2011-05-31 13:13:45 +02:00 |
|
|
|
c2aec12004
|
converted the STEPPER_ENABLE_PIN to a STEPPER_DISABLE_PIN as per the request of Alden Hart of Grbl Shield fame.
|
2011-05-31 13:08:42 +02:00 |
|
|
|
74dcf58c5c
|
simplification in gcode.c also thanks to etienne
|
2011-02-25 15:02:55 +01:00 |
|
|
|
d914089e91
|
spindle could not be stopped. Thanks again to Etienne for reporting
|
2011-02-25 15:00:47 +01:00 |
|
|
|
cd074bc590
|
foolproofed steps/mm setting (must be > 0)
|
2011-02-25 13:40:48 +01:00 |
|
|
|
4cac11ec86
|
fixed synchronization problem with spindle_control
|
2011-02-25 13:30:03 +01:00 |
|
|
|
a18a89c779
|
fixed linebreaks, was LFCR, is CRLF
|
2011-02-24 16:08:06 +01:00 |
|
|
|
87b6364aa0
|
added missing line from G92 patch
|
2011-02-24 15:03:45 +01:00 |
|
|
|
60f417b570
|
fixed a double rounding error compensation bug in mc_arc thanks to Etienne Chové
|
2011-02-23 20:06:55 +01:00 |
|
|
|
ef20be9f4c
|
result of G92 also affects planner
|
2011-02-21 22:32:42 +01:00 |
|
|
|
c491324e89
|
added support for G92
|
2011-02-21 22:26:02 +01:00 |
|
|
|
68ff56a8b1
|
stepper enable pin now toggles to reflect the active/passive state of the stepper subsystem
|
2011-02-21 10:00:16 +01:00 |
|
|
|
2c913a00bd
|
acceleration-Grbl now works with atmega 168 by disabling arc motion
|
2011-02-20 22:13:31 +01:00 |
|
|
|
67d7607e60
|
acceleration-Grbl now works with atmega 168 by disabling arc motion
|
2011-02-20 22:00:12 +01:00 |
|
|
|
d5d6298de3
|
added support for limit switches and homing action
|
2011-02-20 00:29:56 +01:00 |
|
|
|
9c8c259153
|
made most internal function static to allow gcc to inline them
|
2011-02-19 23:03:10 +01:00 |
|
|
|
d21a791eae
|
spindle operations are now synchronized
|
2011-02-19 21:04:40 +01:00 |
|
|
|
464dcd12e8
|
formatting
|
2011-02-19 00:32:36 +01:00 |
|
|
|
6be195ba38
|
cleaned up handling of number parsing in settings_execute_command
|
2011-02-18 23:08:06 +01:00 |
|
|
|
6edbbe322c
|
lowercased boolean constants
|
2011-02-18 23:04:12 +01:00 |
|
|
|
9876e14f0b
|
refactored handling of settings '$' command out of gcode module and into settings module
|
2011-02-18 22:59:16 +01:00 |
|
|
|
6893463e80
|
renamed protocol methods to reflect the new module name
|
2011-02-18 22:19:01 +01:00 |
|
|
|
85f62111b5
|
renamed serial_protocol -> protocol
|
2011-02-18 22:11:53 +01:00 |
|
|
|
6152d16205
|
circle buffers now power of two size and indicies are unsigned to help gcc make a few nice optimizations
|
2011-02-18 21:46:18 +01:00 |
|
|
|
124bc363bd
|
removed inline-keywords because gcc ignores them anyway
|
2011-02-17 23:59:10 +01:00 |
|
|
|
b8eee5ac9a
|
clamped safe speed to 100% of nominal speed. Fixes a problem that might have spelled trouble at very low feed rates
|
2011-02-17 21:41:41 +01:00 |
|
|
|
2ff680a125
|
improved some defaults
|
2011-02-17 20:24:04 +01:00 |
|
|
|
23462de85a
|
cleaned up settings.h
|
2011-02-17 20:23:12 +01:00 |
|
|
|
5eddbabcd3
|
added another note for existing users
|
2011-02-17 20:03:29 +01:00 |
|
|
|
c09b05fcbd
|
updated readme with info for users of 168's
|
2011-02-17 19:27:53 +01:00 |
|
