Processor-independent pin mapping feature.
- Cleaned up and organized pin mapping concept by @elmom. - pin_map.h allows for user-supplied pin mapping and port vector definitions in a centralized file. With more processor types, more definitions could be added.
This commit is contained in:
Sonny Jeon
parent
b2a69c02cf
commit
e24e67ffe2
25
config.h
25
config.h
@ -2,8 +2,8 @@
|
|||||||
config.h - compile time configuration
|
config.h - compile time configuration
|
||||||
Part of Grbl
|
Part of Grbl
|
||||||
|
|
||||||
|
Copyright (c) 2011-2013 Sungeun K. Jeon
|
||||||
Copyright (c) 2009-2011 Simen Svale Skogsrud
|
Copyright (c) 2009-2011 Simen Svale Skogsrud
|
||||||
Copyright (c) 2011-2012 Sungeun K. Jeon
|
|
||||||
|
|
||||||
Grbl is free software: you can redistribute it and/or modify
|
Grbl is free software: you can redistribute it and/or modify
|
||||||
it under the terms of the GNU General Public License as published by
|
it under the terms of the GNU General Public License as published by
|
||||||
@ -19,29 +19,24 @@
|
|||||||
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#ifndef config_h
|
// This file contains compile-time configurations for Grbl's internal system. For the most part,
|
||||||
#define config_h
|
// users will not need to directly modify these, but they are here for specific needs, i.e.
|
||||||
|
// performance tuning or adjusting to non-typical machines.
|
||||||
|
|
||||||
// IMPORTANT: Any changes here requires a full re-compiling of the source code to propagate them.
|
// IMPORTANT: Any changes here requires a full re-compiling of the source code to propagate them.
|
||||||
|
|
||||||
|
#ifndef config_h
|
||||||
|
#define config_h
|
||||||
|
|
||||||
// Default settings. Used when resetting EEPROM. Change to desired name in defaults.h
|
// Default settings. Used when resetting EEPROM. Change to desired name in defaults.h
|
||||||
#define DEFAULTS_GENERIC
|
#define DEFAULTS_GENERIC
|
||||||
|
|
||||||
// Serial baud rate
|
// Serial baud rate
|
||||||
#define BAUD_RATE 9600
|
#define BAUD_RATE 9600
|
||||||
|
|
||||||
// Pin mappings, pick one and comment others
|
// Default pin mappings. Grbl officially supports the Arduino Uno only. Other processor types
|
||||||
#define DEFAULT_328P
|
// may exist from user-supplied templates or directly user-defined in pin_map.h
|
||||||
//#define DEFAULT_2560
|
#define ARDUINO_UNO
|
||||||
//#define CUSTOM_PINS
|
|
||||||
|
|
||||||
if defined(DEFAULT_328P)
|
|
||||||
#include config_default_328p.h
|
|
||||||
elif defined(DEFAULT_2560)
|
|
||||||
#include config_default_2560.h
|
|
||||||
elif defined(CUSTOM_PINS)
|
|
||||||
#include config_custom.h // Create from the closest pre-existing config_default_*.h
|
|
||||||
#endif
|
|
||||||
|
|
||||||
// Define runtime command special characters. These characters are 'picked-off' directly from the
|
// Define runtime command special characters. These characters are 'picked-off' directly from the
|
||||||
// serial read data stream and are not passed to the grbl line execution parser. Select characters
|
// serial read data stream and are not passed to the grbl line execution parser. Select characters
|
||||||
|
|||||||
@ -1,70 +0,0 @@
|
|||||||
#ifndef config_default_2560_h
|
|
||||||
#define config_default_2560_h
|
|
||||||
|
|
||||||
// Define pin-assignments
|
|
||||||
// NOTE: All step bit and direction pins must be on the same port.
|
|
||||||
#define STEPPING_DDR DDRA
|
|
||||||
#define STEPPING_PORT PORTA
|
|
||||||
#define STEPPING_PIN PINA
|
|
||||||
#define X_STEP_BIT 0 // MEGA2560 Digital Pin 22
|
|
||||||
#define Y_STEP_BIT 2 // MEGA2560 Digital Pin 24
|
|
||||||
#define Z_STEP_BIT 4 // MEGA2560 Digital Pin 26
|
|
||||||
#define C_STEP_BIT 6 // MEGA2560 Digital Pin 28
|
|
||||||
#define X_DIRECTION_BIT 1 // MEGA2560 Digital Pin 23
|
|
||||||
#define Y_DIRECTION_BIT 3 // MEGA2560 Digital Pin 25
|
|
||||||
#define Z_DIRECTION_BIT 5 // MEGA2560 Digital Pin 27
|
|
||||||
#define C_DIRECTION_BIT 7 // MEGA2560 Digital Pin 29
|
|
||||||
#define STEP_MASK ((1<<X_STEP_BIT)|(1<<Y_STEP_BIT)|(1<<Z_STEP_BIT)) // All step bits
|
|
||||||
#define DIRECTION_MASK ((1<<X_DIRECTION_BIT)|(1<<Y_DIRECTION_BIT)|(1<<Z_DIRECTION_BIT)) // All direction bits
|
|
||||||
#define STEPPING_MASK (STEP_MASK | DIRECTION_MASK) // All stepping-related bits (step/direction)
|
|
||||||
|
|
||||||
#define STEPPERS_DISABLE_DDR DDRC
|
|
||||||
#define STEPPERS_DISABLE_PORT PORTC
|
|
||||||
#define STEPPERS_DISABLE_BIT 7 // MEGA2560 Digital Pin 30
|
|
||||||
#define STEPPERS_DISABLE_MASK (1<<STEPPERS_DISABLE_BIT)
|
|
||||||
|
|
||||||
// NOTE: All limit bit pins must be on the same port
|
|
||||||
#define LIMIT_DDR DDRC
|
|
||||||
#define LIMIT_PORT PORTC
|
|
||||||
#define LIMIT_PIN PINC
|
|
||||||
#define X_LIMIT_BIT 6 // MEGA2560 Digital Pin 31
|
|
||||||
#define Y_LIMIT_BIT 5 // MEGA2560 Digital Pin 32
|
|
||||||
#define Z_LIMIT_BIT 4 // MEGA2560 Digital Pin 33
|
|
||||||
#define C_LIMIT_BIT 3 // MEGA2560 Digital Pin 34
|
|
||||||
#define LIMIT_INT PCIE0 // Pin change interrupt enable pin
|
|
||||||
#define LIMIT_INT_vect PCINT0_vect
|
|
||||||
#define LIMIT_PCMSK PCMSK0 // Pin change interrupt register
|
|
||||||
#define LIMIT_MASK ((1<<X_LIMIT_BIT)|(1<<Y_LIMIT_BIT)|(1<<Z_LIMIT_BIT)) // All limit bits
|
|
||||||
|
|
||||||
#define SPINDLE_ENABLE_DDR DDRC
|
|
||||||
#define SPINDLE_ENABLE_PORT PORTC
|
|
||||||
#define SPINDLE_ENABLE_BIT 2 // MEGA2560 Digital Pin 35
|
|
||||||
|
|
||||||
#define SPINDLE_DIRECTION_DDR DDRC
|
|
||||||
#define SPINDLE_DIRECTION_PORT PORTC
|
|
||||||
#define SPINDLE_DIRECTION_BIT 1 // MEGA2560 Digital Pin 36
|
|
||||||
|
|
||||||
#define COOLANT_FLOOD_DDR DDRC
|
|
||||||
#define COOLANT_FLOOD_PORT PORTC
|
|
||||||
#define COOLANT_FLOOD_BIT 0 // MEGA2560 Digital Pin 37
|
|
||||||
|
|
||||||
// NOTE: Uno analog pins 4 and 5 are reserved for an i2c interface, and may be installed at
|
|
||||||
// a later date if flash and memory space allows.
|
|
||||||
// #define ENABLE_M7 // Mist coolant disabled by default. Uncomment to enable.
|
|
||||||
#ifdef ENABLE_M7
|
|
||||||
#define COOLANT_MIST_DDR DDRC
|
|
||||||
#define COOLANT_MIST_PORT PORTC
|
|
||||||
#define COOLANT_MIST_BIT 0 // MEGA2560 Digital Pin 37
|
|
||||||
#endif
|
|
||||||
|
|
||||||
// NOTE: All pinouts pins must be on the same port
|
|
||||||
#define PINOUT_DDR DDRC
|
|
||||||
#define PINOUT_PIN PINC
|
|
||||||
#define PINOUT_PORT PORTC
|
|
||||||
#define PIN_RESET 0 // Uno Analog Pin 0
|
|
||||||
#define PIN_FEED_HOLD 1 // Uno Analog Pin 1
|
|
||||||
#define PIN_CYCLE_START 2 // Uno Analog Pin 2
|
|
||||||
#define PINOUT_INT PCIE1 // Pin change interrupt enable pin
|
|
||||||
#define PINOUT_INT_vect PCINT1_vect
|
|
||||||
#define PINOUT_PCMSK PCMSK1 // Pin change interrupt register
|
|
||||||
#define PINOUT_MASK ((1<<PIN_RESET)|(1<<PIN_FEED_HOLD)|(1<<PIN_CYCLE_START))
|
|
||||||
@ -1,66 +0,0 @@
|
|||||||
#ifndef config_default_2560_h
|
|
||||||
#define config_default_2560_h
|
|
||||||
|
|
||||||
// Define pin-assignments
|
|
||||||
// NOTE: All step bit and direction pins must be on the same port.
|
|
||||||
#define STEPPING_DDR DDRD
|
|
||||||
#define STEPPING_PORT PORTD
|
|
||||||
#define X_STEP_BIT 2 // Uno Digital Pin 2
|
|
||||||
#define Y_STEP_BIT 3 // Uno Digital Pin 3
|
|
||||||
#define Z_STEP_BIT 4 // Uno Digital Pin 4
|
|
||||||
#define X_DIRECTION_BIT 5 // Uno Digital Pin 5
|
|
||||||
#define Y_DIRECTION_BIT 6 // Uno Digital Pin 6
|
|
||||||
#define Z_DIRECTION_BIT 7 // Uno Digital Pin 7
|
|
||||||
#define STEP_MASK ((1<<X_STEP_BIT)|(1<<Y_STEP_BIT)|(1<<Z_STEP_BIT)) // All step bits
|
|
||||||
#define DIRECTION_MASK ((1<<X_DIRECTION_BIT)|(1<<Y_DIRECTION_BIT)|(1<<Z_DIRECTION_BIT)) // All direction bits
|
|
||||||
#define STEPPING_MASK (STEP_MASK | DIRECTION_MASK) // All stepping-related bits (step/direction)
|
|
||||||
|
|
||||||
#define STEPPERS_DISABLE_DDR DDRB
|
|
||||||
#define STEPPERS_DISABLE_PORT PORTB
|
|
||||||
#define STEPPERS_DISABLE_BIT 0 // Uno Digital Pin 8
|
|
||||||
#define STEPPERS_DISABLE_MASK (1<<STEPPERS_DISABLE_BIT)
|
|
||||||
|
|
||||||
// NOTE: All limit bit pins must be on the same port
|
|
||||||
#define LIMIT_DDR DDRB
|
|
||||||
#define LIMIT_PIN PINB
|
|
||||||
#define LIMIT_PORT PORTB
|
|
||||||
#define X_LIMIT_BIT 1 // Uno Digital Pin 9
|
|
||||||
#define Y_LIMIT_BIT 2 // Uno Digital Pin 10
|
|
||||||
#define Z_LIMIT_BIT 3 // Uno Digital Pin 11
|
|
||||||
#define LIMIT_INT PCIE0 // Pin change interrupt enable pin
|
|
||||||
#define LIMIT_INT_vect PCINT0_vect
|
|
||||||
#define LIMIT_PCMSK PCMSK0 // Pin change interrupt register
|
|
||||||
#define LIMIT_MASK ((1<<X_LIMIT_BIT)|(1<<Y_LIMIT_BIT)|(1<<Z_LIMIT_BIT)) // All limit bits
|
|
||||||
|
|
||||||
#define SPINDLE_ENABLE_DDR DDRB
|
|
||||||
#define SPINDLE_ENABLE_PORT PORTB
|
|
||||||
#define SPINDLE_ENABLE_BIT 4 // Uno Digital Pin 12
|
|
||||||
|
|
||||||
#define SPINDLE_DIRECTION_DDR DDRB
|
|
||||||
#define SPINDLE_DIRECTION_PORT PORTB
|
|
||||||
#define SPINDLE_DIRECTION_BIT 5 // Uno Digital Pin 13 (NOTE: D13 can't be pulled-high input due to LED.)
|
|
||||||
|
|
||||||
#define COOLANT_FLOOD_DDR DDRC
|
|
||||||
#define COOLANT_FLOOD_PORT PORTC
|
|
||||||
#define COOLANT_FLOOD_BIT 3 // Uno Analog Pin 3
|
|
||||||
|
|
||||||
// NOTE: Uno analog pins 4 and 5 are reserved for an i2c interface, and may be installed at
|
|
||||||
// a later date if flash and memory space allows.
|
|
||||||
// #define ENABLE_M7 // Mist coolant disabled by default. Uncomment to enable.
|
|
||||||
#ifdef ENABLE_M7
|
|
||||||
#define COOLANT_MIST_DDR DDRC
|
|
||||||
#define COOLANT_MIST_PORT PORTC
|
|
||||||
#define COOLANT_MIST_BIT 4 // Uno Analog Pin 4
|
|
||||||
#endif
|
|
||||||
|
|
||||||
// NOTE: All pinouts pins must be on the same port
|
|
||||||
#define PINOUT_DDR DDRC
|
|
||||||
#define PINOUT_PIN PINC
|
|
||||||
#define PINOUT_PORT PORTC
|
|
||||||
#define PIN_RESET 0 // Uno Analog Pin 0
|
|
||||||
#define PIN_FEED_HOLD 1 // Uno Analog Pin 1
|
|
||||||
#define PIN_CYCLE_START 2 // Uno Analog Pin 2
|
|
||||||
#define PINOUT_INT PCIE1 // Pin change interrupt enable pin
|
|
||||||
#define PINOUT_INT_vect PCINT1_vect
|
|
||||||
#define PINOUT_PCMSK PCMSK1 // Pin change interrupt register
|
|
||||||
#define PINOUT_MASK ((1<<PIN_RESET)|(1<<PIN_FEED_HOLD)|(1<<PIN_CYCLE_START))
|
|
||||||
@ -27,6 +27,7 @@
|
|||||||
#include <stdbool.h>
|
#include <stdbool.h>
|
||||||
#include "config.h"
|
#include "config.h"
|
||||||
#include "defaults.h"
|
#include "defaults.h"
|
||||||
|
#include "pin_map.h"
|
||||||
|
|
||||||
#define false 0
|
#define false 0
|
||||||
#define true 1
|
#define true 1
|
||||||
|
|||||||
181
pin_map.h
Normal file
181
pin_map.h
Normal file
@ -0,0 +1,181 @@
|
|||||||
|
/*
|
||||||
|
pin_map.h - Pin mapping configuration file
|
||||||
|
Part of Grbl
|
||||||
|
|
||||||
|
Copyright (c) 2013 Sungeun K. Jeon
|
||||||
|
|
||||||
|
Grbl is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 3 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
Grbl is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* The pin_map.h file serves as a central pin mapping settings file for different processor
|
||||||
|
types, i.e. AVR 328p or AVR Mega 2560. Grbl officially supports the Arduino Uno, but the
|
||||||
|
other supplied pin mappings are supplied by users, so your results may vary. */
|
||||||
|
|
||||||
|
#ifndef pin_map_h
|
||||||
|
#define pin_map_h
|
||||||
|
|
||||||
|
#ifdef ARDUINO_UNO // AVR 328p, Officially supported by Grbl.
|
||||||
|
|
||||||
|
// Serial port pins
|
||||||
|
#define Serial_RX_vect USART_RX_vect
|
||||||
|
#define Serial_UDRE_vect USART_UDRE_vect
|
||||||
|
|
||||||
|
// NOTE: All step bit and direction pins must be on the same port.
|
||||||
|
#define STEPPING_DDR DDRD
|
||||||
|
#define STEPPING_PORT PORTD
|
||||||
|
#define X_STEP_BIT 2 // Uno Digital Pin 2
|
||||||
|
#define Y_STEP_BIT 3 // Uno Digital Pin 3
|
||||||
|
#define Z_STEP_BIT 4 // Uno Digital Pin 4
|
||||||
|
#define X_DIRECTION_BIT 5 // Uno Digital Pin 5
|
||||||
|
#define Y_DIRECTION_BIT 6 // Uno Digital Pin 6
|
||||||
|
#define Z_DIRECTION_BIT 7 // Uno Digital Pin 7
|
||||||
|
#define STEP_MASK ((1<<X_STEP_BIT)|(1<<Y_STEP_BIT)|(1<<Z_STEP_BIT)) // All step bits
|
||||||
|
#define DIRECTION_MASK ((1<<X_DIRECTION_BIT)|(1<<Y_DIRECTION_BIT)|(1<<Z_DIRECTION_BIT)) // All direction bits
|
||||||
|
#define STEPPING_MASK (STEP_MASK | DIRECTION_MASK) // All stepping-related bits (step/direction)
|
||||||
|
|
||||||
|
#define STEPPERS_DISABLE_DDR DDRB
|
||||||
|
#define STEPPERS_DISABLE_PORT PORTB
|
||||||
|
#define STEPPERS_DISABLE_BIT 0 // Uno Digital Pin 8
|
||||||
|
#define STEPPERS_DISABLE_MASK (1<<STEPPERS_DISABLE_BIT)
|
||||||
|
|
||||||
|
// NOTE: All limit bit pins must be on the same port
|
||||||
|
#define LIMIT_DDR DDRB
|
||||||
|
#define LIMIT_PIN PINB
|
||||||
|
#define LIMIT_PORT PORTB
|
||||||
|
#define X_LIMIT_BIT 1 // Uno Digital Pin 9
|
||||||
|
#define Y_LIMIT_BIT 2 // Uno Digital Pin 10
|
||||||
|
#define Z_LIMIT_BIT 3 // Uno Digital Pin 11
|
||||||
|
#define LIMIT_INT PCIE0 // Pin change interrupt enable pin
|
||||||
|
#define LIMIT_INT_vect PCINT0_vect
|
||||||
|
#define LIMIT_PCMSK PCMSK0 // Pin change interrupt register
|
||||||
|
#define LIMIT_MASK ((1<<X_LIMIT_BIT)|(1<<Y_LIMIT_BIT)|(1<<Z_LIMIT_BIT)) // All limit bits
|
||||||
|
|
||||||
|
#define SPINDLE_ENABLE_DDR DDRB
|
||||||
|
#define SPINDLE_ENABLE_PORT PORTB
|
||||||
|
#define SPINDLE_ENABLE_BIT 4 // Uno Digital Pin 12
|
||||||
|
|
||||||
|
#define SPINDLE_DIRECTION_DDR DDRB
|
||||||
|
#define SPINDLE_DIRECTION_PORT PORTB
|
||||||
|
#define SPINDLE_DIRECTION_BIT 5 // Uno Digital Pin 13 (NOTE: D13 can't be pulled-high input due to LED.)
|
||||||
|
|
||||||
|
#define COOLANT_FLOOD_DDR DDRC
|
||||||
|
#define COOLANT_FLOOD_PORT PORTC
|
||||||
|
#define COOLANT_FLOOD_BIT 3 // Uno Analog Pin 3
|
||||||
|
|
||||||
|
// NOTE: Uno analog pins 4 and 5 are reserved for an i2c interface, and may be installed at
|
||||||
|
// a later date if flash and memory space allows.
|
||||||
|
// #define ENABLE_M7 // Mist coolant disabled by default. Uncomment to enable.
|
||||||
|
#ifdef ENABLE_M7
|
||||||
|
#define COOLANT_MIST_DDR DDRC
|
||||||
|
#define COOLANT_MIST_PORT PORTC
|
||||||
|
#define COOLANT_MIST_BIT 4 // Uno Analog Pin 4
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// NOTE: All pinouts pins must be on the same port
|
||||||
|
#define PINOUT_DDR DDRC
|
||||||
|
#define PINOUT_PIN PINC
|
||||||
|
#define PINOUT_PORT PORTC
|
||||||
|
#define PIN_RESET 0 // Uno Analog Pin 0
|
||||||
|
#define PIN_FEED_HOLD 1 // Uno Analog Pin 1
|
||||||
|
#define PIN_CYCLE_START 2 // Uno Analog Pin 2
|
||||||
|
#define PINOUT_INT PCIE1 // Pin change interrupt enable pin
|
||||||
|
#define PINOUT_INT_vect PCINT1_vect
|
||||||
|
#define PINOUT_PCMSK PCMSK1 // Pin change interrupt register
|
||||||
|
#define PINOUT_MASK ((1<<PIN_RESET)|(1<<PIN_FEED_HOLD)|(1<<PIN_CYCLE_START))
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
#ifdef ARDUINO_MEGA_2560 // Unsupported. Doesn't work. Supplied by @elmom.
|
||||||
|
|
||||||
|
// Serial port pins
|
||||||
|
#define Serial_RX_vect USART0_RX_vect
|
||||||
|
#define Serial_UDRE_vect USART0_UDRE_vect
|
||||||
|
|
||||||
|
// NOTE: All step bit and direction pins must be on the same port.
|
||||||
|
#define STEPPING_DDR DDRA
|
||||||
|
#define STEPPING_PORT PORTA
|
||||||
|
#define STEPPING_PIN PINA
|
||||||
|
#define X_STEP_BIT 0 // MEGA2560 Digital Pin 22
|
||||||
|
#define Y_STEP_BIT 1 // MEGA2560 Digital Pin 23
|
||||||
|
#define Z_STEP_BIT 2 // MEGA2560 Digital Pin 24
|
||||||
|
// #define C_STEP_BIT 3 // MEGA2560 Digital Pin 25
|
||||||
|
#define X_DIRECTION_BIT 4 // MEGA2560 Digital Pin 26
|
||||||
|
#define Y_DIRECTION_BIT 5 // MEGA2560 Digital Pin 27
|
||||||
|
#define Z_DIRECTION_BIT 6 // MEGA2560 Digital Pin 28
|
||||||
|
// #define C_DIRECTION_BIT 7 // MEGA2560 Digital Pin 29
|
||||||
|
#define STEP_MASK ((1<<X_STEP_BIT)|(1<<Y_STEP_BIT)|(1<<Z_STEP_BIT)) // All step bits
|
||||||
|
#define DIRECTION_MASK ((1<<X_DIRECTION_BIT)|(1<<Y_DIRECTION_BIT)|(1<<Z_DIRECTION_BIT)) // All direction bits
|
||||||
|
#define STEPPING_MASK (STEP_MASK | DIRECTION_MASK) // All stepping-related bits (step/direction)
|
||||||
|
|
||||||
|
#define STEPPERS_DISABLE_DDR DDRC
|
||||||
|
#define STEPPERS_DISABLE_PORT PORTC
|
||||||
|
#define STEPPERS_DISABLE_BIT 7 // MEGA2560 Digital Pin 30
|
||||||
|
#define STEPPERS_DISABLE_MASK (1<<STEPPERS_DISABLE_BIT)
|
||||||
|
|
||||||
|
// NOTE: All limit bit pins must be on the same port
|
||||||
|
#define LIMIT_DDR DDRC
|
||||||
|
#define LIMIT_PORT PORTC
|
||||||
|
#define LIMIT_PIN PINC
|
||||||
|
#define X_LIMIT_BIT 6 // MEGA2560 Digital Pin 31
|
||||||
|
#define Y_LIMIT_BIT 5 // MEGA2560 Digital Pin 32
|
||||||
|
#define Z_LIMIT_BIT 4 // MEGA2560 Digital Pin 33
|
||||||
|
// #define C_LIMIT_BIT 3 // MEGA2560 Digital Pin 34
|
||||||
|
#define LIMIT_INT PCIE0 // Pin change interrupt enable pin
|
||||||
|
#define LIMIT_INT_vect PCINT0_vect
|
||||||
|
#define LIMIT_PCMSK PCMSK0 // Pin change interrupt register
|
||||||
|
#define LIMIT_MASK ((1<<X_LIMIT_BIT)|(1<<Y_LIMIT_BIT)|(1<<Z_LIMIT_BIT)) // All limit bits
|
||||||
|
|
||||||
|
#define SPINDLE_ENABLE_DDR DDRC
|
||||||
|
#define SPINDLE_ENABLE_PORT PORTC
|
||||||
|
#define SPINDLE_ENABLE_BIT 2 // MEGA2560 Digital Pin 35
|
||||||
|
|
||||||
|
#define SPINDLE_DIRECTION_DDR DDRC
|
||||||
|
#define SPINDLE_DIRECTION_PORT PORTC
|
||||||
|
#define SPINDLE_DIRECTION_BIT 1 // MEGA2560 Digital Pin 36
|
||||||
|
|
||||||
|
#define COOLANT_FLOOD_DDR DDRC
|
||||||
|
#define COOLANT_FLOOD_PORT PORTC
|
||||||
|
#define COOLANT_FLOOD_BIT 0 // MEGA2560 Digital Pin 37
|
||||||
|
|
||||||
|
// #define ENABLE_M7 // Mist coolant disabled by default. Uncomment to enable.
|
||||||
|
#ifdef ENABLE_M7
|
||||||
|
#define COOLANT_MIST_DDR DDRC
|
||||||
|
#define COOLANT_MIST_PORT PORTC
|
||||||
|
#define COOLANT_MIST_BIT 0 // MEGA2560 Digital Pin 37
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// NOTE: All pinouts pins must be on the same port
|
||||||
|
#define PINOUT_DDR DDRC
|
||||||
|
#define PINOUT_PIN PINC
|
||||||
|
#define PINOUT_PORT PORTC
|
||||||
|
#define PIN_RESET 0 // Uno Analog Pin 0
|
||||||
|
#define PIN_FEED_HOLD 1 // Uno Analog Pin 1
|
||||||
|
#define PIN_CYCLE_START 2 // Uno Analog Pin 2
|
||||||
|
#define PINOUT_INT PCIE1 // Pin change interrupt enable pin
|
||||||
|
#define PINOUT_INT_vect PCINT1_vect
|
||||||
|
#define PINOUT_PCMSK PCMSK1 // Pin change interrupt register
|
||||||
|
#define PINOUT_MASK ((1<<PIN_RESET)|(1<<PIN_FEED_HOLD)|(1<<PIN_CYCLE_START))
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*
|
||||||
|
#ifdef CUSTOM_PROC
|
||||||
|
// For a custom pin map or different processor, copy and paste one of the default pin map
|
||||||
|
// settings above and modify it to your needs. Then, make sure the defined name is also
|
||||||
|
// changed in the config.h file.
|
||||||
|
#endif
|
||||||
|
*/
|
||||||
|
|
||||||
|
#endif
|
||||||
14
serial.h
14
serial.h
@ -27,20 +27,6 @@
|
|||||||
|
|
||||||
#include "nuts_bolts.h"
|
#include "nuts_bolts.h"
|
||||||
|
|
||||||
#if defined(USART_RX_vect) // For atmega328p (Arduino Uno) etc.
|
|
||||||
#define Serial_RX_vect USART_RX_vect
|
|
||||||
#define Serial_UDRE_vect USART_UDRE_vect
|
|
||||||
#elif defined(USART0_RX_vect) // For atmega644p, atmega1280 and atmega2560 (ArduinoMEGA) etc.
|
|
||||||
#define Serial_RX_vect USART0_RX_vect
|
|
||||||
#define Serial_UDRE_vect USART0_UDRE_vect
|
|
||||||
#elif defined(USART_RXC_vect) // For some odd chips
|
|
||||||
#define Serial_RX_vect USART_RXC_vect
|
|
||||||
#define Serial_UDRE_vect USART_UDRE_vect
|
|
||||||
#elif defined(USART1_RX_vect)// Some AVRs have 1 USB and a single USART (USART1), though the USB is often preffered for serial comms (like Arduino Leonardo etc.)
|
|
||||||
#define Serial1_RX_vect USART1_RX_vect
|
|
||||||
#define Serial1_UDRE_vect USART1_UDRE_vect
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#ifndef RX_BUFFER_SIZE
|
#ifndef RX_BUFFER_SIZE
|
||||||
#define RX_BUFFER_SIZE 128
|
#define RX_BUFFER_SIZE 128
|
||||||
#endif
|
#endif
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user