ManuelW/grbl-LPC-CoreXY
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity

Addressed optional PWM min value issue. Updated docs.

Browse Source 
- [fix] Spindle PWM minimum value had some typos. Fixed the macros to
compile correctly. Only effects users that enable SPINDLE_MINIMUM_PWM.
The name changed to SPINDLE_PWM_MIN_VALUE for consistency sake.

- Updated the laser documentation.
This commit is contained in:
Sonny Jeon
2016-12-18 19:17:55 -07:00
parent af17f0071f
commit d5ed3bdb81
5 changed files with 65 additions and 26 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
grbl/config.h
View File

@ -345,9 +345,9 @@
// and the voltage set by the minimum PWM for minimum rpm. This difference is 0.02V per PWM value. So, when
// minimum PWM is at 1, only 0.02 volts separate enabled and disabled. At PWM 5, this would be 0.1V. Keep
// in mind that you will begin to lose PWM resolution with increased minimum PWM values, since you have less
// and less range over the total 256 PWM levels to signal different spindle speeds.
// NOTE: Compute duty cycle at the minimum PWM by this equation: (% duty cycle)=(SPINDLE_MINIMUM_PWM/256)*100
// #define SPINDLE_MINIMUM_PWM_VALUE 5 // Default disabled. Uncomment to enable. Must be greater than zero. Integer (1-255).
// and less range over the total 255 PWM levels to signal different spindle speeds.
// NOTE: Compute duty cycle at the minimum PWM by this equation: (% duty cycle)=(SPINDLE_PWM_MIN_VALUE/255)*100
// #define SPINDLE_PWM_MIN_VALUE 5 // Default disabled. Uncomment to enable. Must be greater than zero. Integer (1-255).
// By default on a 328p(Uno), Grbl combines the variable spindle PWM and the enable into one pin to help
// preserve I/O pins. For certain setups, these may need to be separate pins. This configure option uses