ManuelW/grbl-LPC-CoreXY
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity

Minor fix related to spindle_stop() crashing abort in certain cases.

Browse Source 
- Updated spindle_stop() to fix abort bug and to be more in line with
v0.8.
This commit is contained in:
Sonny Jeon
2012-03-10 12:34:09 -07:00
parent 86cdae0060
commit d3be216931
5 changed files with 24 additions and 16 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
config.h
View File

@ -115,8 +115,8 @@
#define DWELL_TIME_STEP 50 // Integer (1-255) (milliseconds)
// FOR ADVANCED USERS ONLY: Toggles XON/XOFF software flow control for serial communications.
// Officially not supported due to problems involving the Atmega8U2 USB-to-serial chips on current
// future Arduinos boards. The firmware on these chips do not support XON/XOFF flow control
// Officially not supported due to problems involving the Atmega8U2 USB-to-serial chips on all
// new and future Arduinos. The firmware on these chips do not support XON/XOFF flow control
// characters and the intermediate buffer in the chips cause latency and overflow problems with
// standard terminal programs. However, using specifically-programmed UI's to manage this latency
// problem has been confirmed to work, as well as, using older FTDI FT232RL-based Arduinos
@ -141,4 +141,12 @@
#define DECIMAL_MULTIPLIER 100
#endif
// Limit step rate for homing
#define LIMIT_STEP_RATE 1 // (mm/min)
// Debounce delay is the time delay the controller waits for a "good" signal from the limit switch.
// A delay of 3ms to 5ms is a good starting value.
#define LIMIT_DEBOUNCE_DELAY 5 // (milliseconds)
#endif