Added X-Carve defaults.

- Added X-Carve 500mm and 1000mm default files.

- Tweaked all default files. Removed obsolete AUTO_START and updated
some JUNCTION_DEVIATION defaults after testing showed these needed to
be reduced slightly.

grbl/defaults/defaults_generic.h

@@ -45,10 +45,9 @@
   #define DEFAULT_DIRECTION_INVERT_MASK 0
   #define DEFAULT_STEPPER_IDLE_LOCK_TIME 25 // msec (0-254, 255 keeps steppers enabled)
   #define DEFAULT_STATUS_REPORT_MASK ((BITFLAG_RT_STATUS_MACHINE_POSITION)|(BITFLAG_RT_STATUS_WORK_POSITION))
-  #define DEFAULT_JUNCTION_DEVIATION 0.02 // mm
+  #define DEFAULT_JUNCTION_DEVIATION 0.01 // mm
   #define DEFAULT_ARC_TOLERANCE 0.002 // mm
   #define DEFAULT_REPORT_INCHES 0 // false
-  #define DEFAULT_AUTO_START 1 // true
   #define DEFAULT_INVERT_ST_ENABLE 0 // false
   #define DEFAULT_INVERT_LIMIT_PINS 0 // false
   #define DEFAULT_SOFT_LIMIT_ENABLE 0 // false

grbl/defaults/defaults_oxcnc.h

@@ -49,7 +49,6 @@
   #define DEFAULT_JUNCTION_DEVIATION 0.02 // mm
   #define DEFAULT_ARC_TOLERANCE 0.002 // mm
   #define DEFAULT_REPORT_INCHES 0 // false
-  #define DEFAULT_AUTO_START 1 // true
   #define DEFAULT_INVERT_ST_ENABLE 0 // false
   #define DEFAULT_INVERT_LIMIT_PINS 0 // false
   #define DEFAULT_SOFT_LIMIT_ENABLE 0 // false

grbl/defaults/defaults_shapeoko.h

@@ -53,10 +53,9 @@
   #define DEFAULT_DIRECTION_INVERT_MASK ((1<<Y_AXIS)|(1<<Z_AXIS))  
   #define DEFAULT_STEPPER_IDLE_LOCK_TIME 255 // msec (0-254, 255 keeps steppers enabled)
   #define DEFAULT_STATUS_REPORT_MASK ((BITFLAG_RT_STATUS_MACHINE_POSITION)|(BITFLAG_RT_STATUS_WORK_POSITION))
-  #define DEFAULT_JUNCTION_DEVIATION 0.05 // mm
+  #define DEFAULT_JUNCTION_DEVIATION 0.02 // mm
   #define DEFAULT_ARC_TOLERANCE 0.002 // mm
   #define DEFAULT_REPORT_INCHES 0 // false
-  #define DEFAULT_AUTO_START 1 // true
   #define DEFAULT_INVERT_ST_ENABLE 0 // false
   #define DEFAULT_INVERT_LIMIT_PINS 0 // false  
   #define DEFAULT_SOFT_LIMIT_ENABLE 0 // false

grbl/defaults/defaults_shapeoko2.h

@@ -52,10 +52,9 @@
   #define DEFAULT_DIRECTION_INVERT_MASK ((1<<X_AXIS)|(1<<Z_AXIS))
   #define DEFAULT_STEPPER_IDLE_LOCK_TIME 255 // msec (0-254, 255 keeps steppers enabled)
   #define DEFAULT_STATUS_REPORT_MASK ((BITFLAG_RT_STATUS_MACHINE_POSITION)|(BITFLAG_RT_STATUS_WORK_POSITION))
-  #define DEFAULT_JUNCTION_DEVIATION 0.05 // mm
+  #define DEFAULT_JUNCTION_DEVIATION 0.02 // mm
   #define DEFAULT_ARC_TOLERANCE 0.002 // mm
   #define DEFAULT_REPORT_INCHES 0 // false
-  #define DEFAULT_AUTO_START 1 // true
   #define DEFAULT_INVERT_ST_ENABLE 0 // false
   #define DEFAULT_INVERT_LIMIT_PINS 0 // false  
   #define DEFAULT_SOFT_LIMIT_ENABLE 0 // false

grbl/defaults/defaults_sherline.h

@@ -49,10 +49,9 @@
   #define DEFAULT_DIRECTION_INVERT_MASK ((1<<Y_AXIS)|(1<<Z_AXIS))  
   #define DEFAULT_STEPPER_IDLE_LOCK_TIME 25 // msec (0-254, 255 keeps steppers enabled)
   #define DEFAULT_STATUS_REPORT_MASK ((BITFLAG_RT_STATUS_MACHINE_POSITION)|(BITFLAG_RT_STATUS_WORK_POSITION))
-  #define DEFAULT_JUNCTION_DEVIATION 0.02 // mm
+  #define DEFAULT_JUNCTION_DEVIATION 0.01 // mm
   #define DEFAULT_ARC_TOLERANCE 0.002 // mm
   #define DEFAULT_REPORT_INCHES 0 // true
-  #define DEFAULT_AUTO_START 1 // true
   #define DEFAULT_INVERT_ST_ENABLE 0 // false
   #define DEFAULT_INVERT_LIMIT_PINS 0 // false
   #define DEFAULT_SOFT_LIMIT_ENABLE 0 // false

grbl/defaults/defaults_simulator.h

@@ -46,10 +46,9 @@
   #define DEFAULT_DIRECTION_INVERT_MASK 0
   #define DEFAULT_STEPPER_IDLE_LOCK_TIME 25 // msec (0-254, 255 keeps steppers enabled)
   #define DEFAULT_STATUS_REPORT_MASK ((BITFLAG_RT_STATUS_MACHINE_POSITION)|(BITFLAG_RT_STATUS_WORK_POSITION))
-  #define DEFAULT_JUNCTION_DEVIATION 0.02 // mm
+  #define DEFAULT_JUNCTION_DEVIATION 0.01 // mm
   #define DEFAULT_ARC_TOLERANCE 0.002 // mm
   #define DEFAULT_REPORT_INCHES 0 // false
-  #define DEFAULT_AUTO_START 1 // true
   #define DEFAULT_INVERT_ST_ENABLE 0 // false
   #define DEFAULT_INVERT_LIMIT_PINS 0 // false
   #define DEFAULT_SOFT_LIMIT_ENABLE 0 // false

grbl/defaults/defaults_zen_toolworks_7x7.h

@@ -53,7 +53,6 @@
   #define DEFAULT_JUNCTION_DEVIATION 0.02 // mm
   #define DEFAULT_ARC_TOLERANCE 0.002 // mm
   #define DEFAULT_REPORT_INCHES 0 // false
-  #define DEFAULT_AUTO_START 1 // true
   #define DEFAULT_INVERT_ST_ENABLE 0 // false
   #define DEFAULT_INVERT_LIMIT_PINS 0 // false  
   #define DEFAULT_SOFT_LIMIT_ENABLE 0 // false