ManuelW/grbl-LPC-CoreXY
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity

Merge branch 'master' of https://github.com/cprezzi/grbl-LPC

Browse Source
This commit is contained in:
Claudio Prezzi
2017-06-21 09:04:30 +02:00
parent ba4e83723f 50c13a1868
commit b24e01d588
11 changed files with 77 additions and 103 deletions
Download Patch File Download Diff File Expand all files Collapse all files

35
grbl/config.h
View File

@ -129,6 +129,9 @@
// define to force Grbl to always set the machine origin at the homed location despite switch orientation.
// #define HOMING_FORCE_SET_ORIGIN // Uncomment to enable.
// Uncomment this define to force Grbl to always set the machine origin at bottom left.
#define HOMING_FORCE_POSITIVE_SPACE // Uncomment to enable.
// Number of blocks Grbl executes upon startup. These blocks are stored in EEPROM, where the size
// and addresses are defined in settings.h. With the current settings, up to 2 startup blocks may
// be stored and executed in order. These startup blocks would typically be used to set the g-code
@ -359,11 +362,6 @@
// pwm = scaled value. settings.rpm_min scales to SPINDLE_PWM_MIN_VALUE. settings.rpm_max
// scales to SPINDLE_PWM_MAX_VALUE.
//#define SPINDLE_PWM_PERIOD (SystemCoreClock / 40000) // SystemCoreClock / frequency
#define SPINDLE_PWM_OFF_VALUE 0.0 // SPINDLE_PWM_PERIOD * fraction
//#define SPINDLE_PWM_MIN_VALUE (SPINDLE_PWM_PERIOD * 0.0) // SPINDLE_PWM_PERIOD * fraction
//#define SPINDLE_PWM_MAX_VALUE (SPINDLE_PWM_PERIOD * 1.0) // SPINDLE_PWM_PERIOD * fraction
// Used by variable spindle output only. This forces the PWM output to a minimum duty cycle when enabled.
// The PWM pin will still read 0V when the spindle is disabled. Most users will not need this option, but
// it may be useful in certain scenarios. This minimum PWM settings coincides with the spindle rpm minimum
@ -717,10 +715,10 @@
#define CONTROL_INVERT_MASK CONTROL_MASK // May be re-defined to only invert certain control pins.
// Define probe switch input pin.
#define PROBE_DDR NotUsed
#define PROBE_PIN NotUsed
#define PROBE_PORT NotUsed
#define PROBE_BIT 5 // Uno Analog Pin 5
#define PROBE_DDR NotUsed // LPC_GPIO1->FIODIR
#define PROBE_PIN NotUsed // LPC_GPIO1->FIOPIN
#define PROBE_PORT NotUsed // LPC_GPIO1->FIOPIN
#define PROBE_BIT 5
#define PROBE_MASK (1<<PROBE_BIT)
// The LPC17xx has 6 PWM channels. Each channel has 2 pins. It can drive both pins simultaneously to the same value.
@ -744,18 +742,21 @@
#define DEFAULT_Z_STEPS_PER_MM 160.0
#define DEFAULT_X_MAX_RATE 24000 // mm/min
#define DEFAULT_Y_MAX_RATE 24000 // mm/min
#define DEFAULT_Z_MAX_RATE 24000 // mm/min
#define DEFAULT_Z_MAX_RATE 500.0 // mm/min
#define DEFAULT_X_ACCELERATION (2500.0*60*60) // 5000*60*60 mm/min^2 = 5000 mm/sec^2
#define DEFAULT_Y_ACCELERATION (2500.0*60*60) // 5000*60*60 mm/min^2 = 5000 mm/sec^2
#define DEFAULT_Z_ACCELERATION (2500.0*60*60) // 5000*60*60 mm/min^2 = 5000 mm/sec^2
#define DEFAULT_X_CURRENT 0.0 // amps
#define DEFAULT_Y_CURRENT 0.0 // amps
#define DEFAULT_X_CURRENT 0.4 // amps
#define DEFAULT_Y_CURRENT 0.6 // amps
#define DEFAULT_Z_CURRENT 0.0 // amps
#define DEFAULT_A_CURRENT 0.0 // amps
#define DEFAULT_X_MAX_TRAVEL 300.0 // mm
#define DEFAULT_Y_MAX_TRAVEL 200.0 // mm
#define DEFAULT_Z_MAX_TRAVEL 50.0 // mm
#define DEFAULT_SPINDLE_PWM_FREQ 5000 // Hz
#define DEFAULT_SPINDLE_PWM_FREQ 5000 // Hz
#define DEFAULT_SPINDLE_PWM_OFF_VALUE 0.0 // Percent
#define DEFAULT_SPINDLE_PWM_MIN_VALUE 0.0 // Percent
#define DEFAULT_SPINDLE_PWM_MAX_VALUE 100.0 // Percent
#define DEFAULT_SPINDLE_RPM_MAX 1000.0 // rpm
#define DEFAULT_SPINDLE_RPM_MIN 0.0 // rpm
#define DEFAULT_STEP_PULSE_MICROSECONDS 10
@ -768,15 +769,15 @@
#define DEFAULT_REPORT_INCHES 0 // false
#define DEFAULT_INVERT_ST_ENABLE 0 // false
#define DEFAULT_INVERT_LIMIT_PINS 1 // false
#define DEFAULT_SOFT_LIMIT_ENABLE 0 // false
#define DEFAULT_SOFT_LIMIT_ENABLE 1 // false
#define DEFAULT_HARD_LIMIT_ENABLE 0 // false
#define DEFAULT_INVERT_PROBE_PIN 0 // false
#define DEFAULT_LASER_MODE 1 // true
#define DEFAULT_HOMING_ENABLE 0 // false
#define DEFAULT_HOMING_DIR_MASK 0 // move positive dir
#define DEFAULT_HOMING_ENABLE 1 // false
#define DEFAULT_HOMING_DIR_MASK 1 // move positive dir
#define DEFAULT_HOMING_FEED_RATE 50.0 // mm/min
#define DEFAULT_HOMING_SEEK_RATE 6000.0 // mm/min
#define DEFAULT_HOMING_DEBOUNCE_DELAY 250 // msec (0-65k)
#define DEFAULT_HOMING_PULLOFF 1.0 // mm
#define DEFAULT_HOMING_PULLOFF 2.0 // mm
#endif