From a6617782523c17e00aa79641552aad090fa830dc Mon Sep 17 00:00:00 2001
From: cprezzi <cprezzi@comsulting.ch>
Date: Wed, 12 Jul 2017 18:34:50 +0200
Subject: [PATCH] Made board switchable in config.h

---
 grbl/config.h  |  9 ++----
 grbl/cpu_map.h | 88 ++++++++++++--------------------------------------
 2 files changed, 23 insertions(+), 74 deletions(-)

diff --git a/grbl/config.h b/grbl/config.h
index 0f018b6..ba82d01 100644
--- a/grbl/config.h
+++ b/grbl/config.h
@@ -32,20 +32,17 @@
 
 
 // Define board type for pin map and default settings.
-//#define CPU_MAP_SMOOTHIEBOARD   // Smoothieboard (NXP LPC1769 MCU)
-#define CPU_MAP_C3D_REMIX       // Cohesion3D Remix (NXP LPC1769 MCU)
+#define CPU_MAP_SMOOTHIEBOARD   // Smoothieboard (NXP LPC1769 MCU)
+//#define CPU_MAP_C3D_REMIX       // Cohesion3D Remix (NXP LPC1769 MCU)
 //#define CPU_MAP_C3D_MINI        // Cohesion3D Mini (NXP LPC1769 MCU)
 //#define CPU_MAP_MKS_SBASE       // MKS SBASE Board (NXP LPC1768 MCU)
-//#define CPU_MAP_AZTEEG_X5       // Azteeg X5 boards with NXP LPC1769 mcu
+//#define CPU_MAP_AZTEEG_X5       // Azteeg X5 Board (NXP LPC1769 MCU)
 
 // Define machine type for machine specific defaults
 //#define DEFAULTS_GENERIC
 #define DEFAULTS_K40
 //#define DEFAULTS_FABKIT
 
-// For machines with A axis (like rotation axis)
-#define ENABLE_A_AXIS
-
 // Serial baud rate
 // #define BAUD_RATE 230400
 #define BAUD_RATE 115200
diff --git a/grbl/cpu_map.h b/grbl/cpu_map.h
index 4d4ae20..d53f42c 100644
--- a/grbl/cpu_map.h
+++ b/grbl/cpu_map.h
@@ -162,11 +162,7 @@
   #define X_STEP_BIT      0
   #define Y_STEP_BIT      1
   #define Z_STEP_BIT      2
-  #ifdef ENABLE_A_AXIS
-    #define A_STEP_BIT      3
-  #endif
-  //#define B_STEP_BIT      8
-  //#define C_STEP_BIT      9
+  #define A_STEP_BIT      3
   #define STEP_MASK       ((1<<X_STEP_BIT)|(1<<Y_STEP_BIT)|(1<<Z_STEP_BIT)|(1<<A_STEP_BIT)) // All step bits
 
   // Define step direction output pins. NOTE: All direction pins must be on the same port.
@@ -175,11 +171,7 @@
   #define X_DIRECTION_BIT   5
   #define Y_DIRECTION_BIT   11
   #define Z_DIRECTION_BIT   20
-  #ifdef ENABLE_A_AXIS
-    #define A_DIRECTION_BIT   22
-  #endif
-  //#define B_DIRECTION_BIT   13
-  //#define C_DIRECTION_BIT   NotUsed
+  #define A_DIRECTION_BIT   22
   #define DIRECTION_MASK    ((1<<X_DIRECTION_BIT)|(1<<Y_DIRECTION_BIT)|(1<<Z_DIRECTION_BIT)|(1<<A_DIRECTION_BIT)) // All direction bits
 
   // Define stepper driver enable/disable output pin.
@@ -188,11 +180,7 @@
   #define X_DISABLE_BIT           4
   #define Y_DISABLE_BIT           10
   #define Z_DISABLE_BIT           19
-  #ifdef ENABLE_A_AXIS
-    #define A_DISABLE_BIT           21
-  #endif
-  //#define B_DISABLE_BIT           29
-  //#define C_DISABLE_BIT           NotUsed
+  #define A_DISABLE_BIT           21
   #define STEPPERS_DISABLE_MASK   ((1<<X_DISABLE_BIT)|(1<<Y_DISABLE_BIT)|(1<<Z_DISABLE_BIT)|(1<<A_DISABLE_BIT))
 
   // Define homing/hard limit switch input pins and limit interrupt vectors.
@@ -203,11 +191,7 @@
   #define X_LIMIT_BIT       24  // X-MIN=24, X-MAX=25
   #define Y_LIMIT_BIT       26  // Y-MIN=26, Y-MAX=27
   #define Z_LIMIT_BIT	    29  // Z-MIN=28, Z-MAX=29
-  #ifdef ENABLE_A_AXIS
-    #define A_LIMIT_BIT       28  // reuse p1.28, as z-min is not often used
-  #endif
-  //#define B_LIMIT_BIT       NotUsed
-  //#define C_LIMIT_BIT 	  NotUsed
+  #define A_LIMIT_BIT       28  // reuse p1.28, as z-min is not often used
   #define LIMIT_MASK       ((1<<X_LIMIT_BIT)|(1<<Y_LIMIT_BIT)|(1<<Z_LIMIT_BIT)|(1<<A_LIMIT_BIT)) // All limit bits
 
   // Define flood and mist coolant enable output pins.
@@ -282,9 +266,7 @@
   #define X_STEP_BIT      0
   #define Y_STEP_BIT      1
   #define Z_STEP_BIT      2
-  #ifdef ENABLE_A_AXIS
-    #define A_STEP_BIT      3
-  #endif
+  #define A_STEP_BIT      3
   #define STEP_MASK       ((1<<X_STEP_BIT)|(1<<Y_STEP_BIT)|(1<<Z_STEP_BIT)|(1<<A_STEP_BIT)) // All step bits
 
   // Define step direction output pins. NOTE: All direction pins must be on the same port.
@@ -293,9 +275,7 @@
   #define X_DIRECTION_BIT   5
   #define Y_DIRECTION_BIT   11
   #define Z_DIRECTION_BIT   20
-  #ifdef ENABLE_A_AXIS
-    #define A_DIRECTION_BIT   22
-  #endif
+  #define A_DIRECTION_BIT   22
   #define DIRECTION_MASK    ((1<<X_DIRECTION_BIT)|(1<<Y_DIRECTION_BIT)|(1<<Z_DIRECTION_BIT)|(1<<A_DIRECTION_BIT)) // All direction bits
 
   // Define stepper driver enable/disable output pin.
@@ -304,9 +284,7 @@
   #define X_DISABLE_BIT           4
   #define Y_DISABLE_BIT           10
   #define Z_DISABLE_BIT           19
-  #ifdef ENABLE_A_AXIS
-    #define A_DISABLE_BIT           21
-  #endif
+  #define A_DISABLE_BIT           21
   #define STEPPERS_DISABLE_MASK   ((1<<X_DISABLE_BIT)|(1<<Y_DISABLE_BIT)|(1<<Z_DISABLE_BIT)|(1<<A_DISABLE_BIT))
 
   // Define homing/hard limit switch input pins and limit interrupt vectors.
@@ -317,9 +295,7 @@
   #define X_LIMIT_BIT       24  // X-MIN=24, X-MAX=25
   #define Y_LIMIT_BIT       26  // Y-MIN=26, Y-MAX=27
   #define Z_LIMIT_BIT	    28  // Z-MIN=28, Z-MAX=29
-  #ifdef ENABLE_A_AXIS
-    #define A_LIMIT_BIT       29  // reuse p1.29 from Z-MAX
-  #endif
+  #define A_LIMIT_BIT       29  // reuse p1.29 from Z-MAX
   #define LIMIT_MASK       ((1<<X_LIMIT_BIT)|(1<<Y_LIMIT_BIT)|(1<<Z_LIMIT_BIT)|(1<<A_LIMIT_BIT)) // All limit bits
 
   // Define flood and mist coolant enable output pins.
@@ -388,9 +364,7 @@
   #define X_STEP_BIT      0
   #define Y_STEP_BIT      1
   #define Z_STEP_BIT      2
-  #ifdef ENABLE_A_AXIS
-    #define A_STEP_BIT      3
-  #endif
+  #define A_STEP_BIT      3
   #define STEP_MASK       ((1<<X_STEP_BIT)|(1<<Y_STEP_BIT)|(1<<Z_STEP_BIT)|(1<<A_STEP_BIT)) // All step bits
 
   // Define step direction output pins. NOTE: All direction pins must be on the same port.
@@ -399,9 +373,7 @@
   #define X_DIRECTION_BIT   5
   #define Y_DIRECTION_BIT   11
   #define Z_DIRECTION_BIT   20
-  #ifdef ENABLE_A_AXIS
-    #define A_DIRECTION_BIT   22
-  #endif
+  #define A_DIRECTION_BIT   22
   #define DIRECTION_MASK    ((1<<X_DIRECTION_BIT)|(1<<Y_DIRECTION_BIT)|(1<<Z_DIRECTION_BIT)|(1<<A_DIRECTION_BIT)) // All direction bits
 
   // Define stepper driver enable/disable output pin.
@@ -410,9 +382,7 @@
   #define X_DISABLE_BIT           4
   #define Y_DISABLE_BIT           10
   #define Z_DISABLE_BIT           19
-  #ifdef ENABLE_A_AXIS
-    #define A_DISABLE_BIT           21
-  #endif
+  #define A_DISABLE_BIT           21
   #define STEPPERS_DISABLE_MASK   ((1<<X_DISABLE_BIT)|(1<<Y_DISABLE_BIT)|(1<<Z_DISABLE_BIT)|(1<<A_DISABLE_BIT))
 
   // Define homing/hard limit switch input pins and limit interrupt vectors.
@@ -423,9 +393,7 @@
   #define X_LIMIT_BIT       24  // X-MIN=24, X-MAX=25
   #define Y_LIMIT_BIT       26  // Y-MIN=26, Y-MAX=27
   #define Z_LIMIT_BIT	    28  // Z-MIN=28, Z-MAX=29
-  #ifdef ENABLE_A_AXIS
-    #define A_LIMIT_BIT       29  // reuse p1.29 from Z-MAX
-  #endif
+  #define A_LIMIT_BIT       29  // reuse p1.29 from Z-MAX
   #define LIMIT_MASK       ((1<<X_LIMIT_BIT)|(1<<Y_LIMIT_BIT)|(1<<Z_LIMIT_BIT)|(1<<A_LIMIT_BIT)) // All limit bits
 
   // Define flood and mist coolant enable output pins.
@@ -494,9 +462,7 @@
   #define X_STEP_BIT      0
   #define Y_STEP_BIT      1
   #define Z_STEP_BIT      2
-  #ifdef ENABLE_A_AXIS
-    #define A_STEP_BIT      3
-  #endif
+  #define A_STEP_BIT      3
   #define STEP_MASK       ((1<<X_STEP_BIT)|(1<<Y_STEP_BIT)|(1<<Z_STEP_BIT)|(1<<A_STEP_BIT)) // All step bits
 
   // Define step direction output pins. NOTE: All direction pins must be on the same port.
@@ -505,9 +471,7 @@
   #define X_DIRECTION_BIT   5
   #define Y_DIRECTION_BIT   11
   #define Z_DIRECTION_BIT   20
-  #ifdef ENABLE_A_AXIS
-    #define A_DIRECTION_BIT   22
-  #endif
+  #define A_DIRECTION_BIT   22
   #define DIRECTION_MASK    ((1<<X_DIRECTION_BIT)|(1<<Y_DIRECTION_BIT)|(1<<Z_DIRECTION_BIT)|(1<<A_DIRECTION_BIT)) // All direction bits
 
   // Define stepper driver enable/disable output pin.
@@ -516,9 +480,7 @@
   #define X_DISABLE_BIT           4
   #define Y_DISABLE_BIT           10
   #define Z_DISABLE_BIT           19
-  #ifdef ENABLE_A_AXIS
-    #define A_DISABLE_BIT           21
-  #endif
+  #define A_DISABLE_BIT           21
   #define STEPPERS_DISABLE_MASK   ((1<<X_DISABLE_BIT)|(1<<Y_DISABLE_BIT)|(1<<Z_DISABLE_BIT)|(1<<A_DISABLE_BIT))
 
   // Define homing/hard limit switch input pins and limit interrupt vectors.
@@ -529,9 +491,7 @@
   #define X_LIMIT_BIT       24  // X-MIN=24, X-MAX=25
   #define Y_LIMIT_BIT       26  // Y-MIN=26, Y-MAX=27
   #define Z_LIMIT_BIT	    29  // Z-MIN=28, Z-MAX=29
-  #ifdef ENABLE_A_AXIS
-    #define A_LIMIT_BIT       28  // reuse p1.28, as z-min is not often used
-  #endif
+  #define A_LIMIT_BIT       28  // reuse p1.28, as z-min is not often used
   #define LIMIT_MASK       ((1<<X_LIMIT_BIT)|(1<<Y_LIMIT_BIT)|(1<<Z_LIMIT_BIT)|(1<<A_LIMIT_BIT)) // All limit bits
 
   // Define flood and mist coolant enable output pins.
@@ -606,9 +566,7 @@
   #define X_STEP_BIT      1
   #define Y_STEP_BIT      2
   #define Z_STEP_BIT      3
-  #ifdef ENABLE_A_AXIS
-    #define A_STEP_BIT      0
-  #endif
+  #define A_STEP_BIT      0
   #define STEP_MASK       ((1<<X_STEP_BIT)|(1<<Y_STEP_BIT)|(1<<Z_STEP_BIT)|(1<<A_STEP_BIT)) // All step bits
 
   // Define step direction output pins. NOTE: All direction pins must be on the same port.
@@ -617,9 +575,7 @@
   #define X_DIRECTION_BIT   11
   #define Y_DIRECTION_BIT   20
   #define Z_DIRECTION_BIT   22
-  #ifdef ENABLE_A_AXIS
-    #define A_DIRECTION_BIT   5
-  #endif
+  #define A_DIRECTION_BIT   5
   #define DIRECTION_MASK    ((1<<X_DIRECTION_BIT)|(1<<Y_DIRECTION_BIT)|(1<<Z_DIRECTION_BIT)|(1<<A_DIRECTION_BIT)) // All direction bits
 
   // Define stepper driver enable/disable output pin.
@@ -628,9 +584,7 @@
   #define X_DISABLE_BIT           10
   #define Y_DISABLE_BIT           19
   #define Z_DISABLE_BIT           21
-  #ifdef ENABLE_A_AXIS
-    #define A_DISABLE_BIT           4
-  #endif
+  #define A_DISABLE_BIT           4
   #define STEPPERS_DISABLE_MASK   ((1<<X_DISABLE_BIT)|(1<<Y_DISABLE_BIT)|(1<<Z_DISABLE_BIT)|(1<<A_DISABLE_BIT))
 
   // Define homing/hard limit switch input pins and limit interrupt vectors.
@@ -641,9 +595,7 @@
   #define X_LIMIT_BIT       24  // X-MIN=24, X-MAX=27
   #define Y_LIMIT_BIT       25  // Y-MIN=25, Y-MAX=28
   #define Z_LIMIT_BIT	    26  // Z-MIN=26, Z-MAX=29
-  #ifdef ENABLE_A_AXIS
-    #define A_LIMIT_BIT       27  // reuse p1.27, as X-MAX is not used
-  #endif
+  #define A_LIMIT_BIT       27  // reuse p1.27, as X-MAX is not used
   #define LIMIT_MASK       ((1<<X_LIMIT_BIT)|(1<<Y_LIMIT_BIT)|(1<<Z_LIMIT_BIT)|(1<<A_LIMIT_BIT)) // All limit bits
 
   // Define flood and mist coolant enable output pins.