Moved cpu_map.

- Moved cpu_map files to a cpu_map directory, like the defaults file
organization.

Grbl/cpu_map/cpu_map_atmega2560.h

@@ -20,10 +20,12 @@
 
 /* This cpu_map file serves as a central pin mapping settings file for AVR Mega 2560 */
 
+
 #ifdef GRBL_PLATFORM
 #error "cpu_map already defined: GRBL_PLATFORM=" GRBL_PLATFORM
 #endif
 
+
 #define GRBL_PLATFORM "Atmega2560"
 
 // Serial port pins
@@ -133,4 +135,3 @@
   #define SPINDLE_PWM_PORT    PORTH
   #define SPINDLE_PWM_BIT		4 // MEGA2560 Digital Pin 97
 #endif // End of VARIABLE_SPINDLE
-

Grbl/cpu_map/cpu_map_atmega328p.h

@@ -18,9 +18,9 @@
   along with Grbl.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-/* This cpu_map file serves as a central pin mapping settings file for AVR 328p 
+/* Grbl officially supports the Arduino Uno, but the other supplied pin mappings are
-   used on the Arduino Uno */
+   supplied by users, so your results may vary. This cpu_map file serves as a central
-
+   pin mapping settings file for AVR 328p used on the Arduino Uno.  */
    
 #ifdef GRBL_PLATFORM
 #error "cpu_map already defined: GRBL_PLATFORM=" GRBL_PLATFORM
@@ -28,6 +28,7 @@
 
 
 #define GRBL_PLATFORM "Atmega328p"
+
 // Define serial port pins and interrupt vectors.
 #define SERIAL_RX     USART_RX_vect
 #define SERIAL_UDRE   USART_UDRE_vect
@@ -143,4 +144,3 @@
   #define SPINDLE_PWM_PORT  PORTB
   #define SPINDLE_PWM_BIT	  3    // Uno Digital Pin 11
 #endif // End of VARIABLE_SPINDLE
-

doc/log/commit_log_v0.9i.txt

@@ -1,3 +1,22 @@
+----------------
+Date: 2015-05-23
+Author: Sonny Jeon
+Subject: Homing and limit updates. Minor bug fixes.
+
+- Updated new homing cycle to error out when a pull-off motion detects
+the limit is still active.
+
+- Created a limits_get_state() function to centralize it. It reports
+state as a bit-wise booleans according to axis numbering.
+
+- Updated the print uint8 functions. Generalized it to allow both base2
+and base10 printouts, while allowing base2 prints with N_AXIS digits
+for limit state status reports. Doing this saved about 100bytes of
+flash as well.
+
+- Applied CoreXY status reporting bug fix by @phd0. Thanks!
+
+
 ----------------
 Date: 2015-05-22
 Author: Sonny Jeon

grbl/cpu_map.h

@@ -18,43 +18,30 @@
   along with Grbl.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-/* The cpu_map.h file serves as a central pin mapping selection file for different processor
+/* The cpu_map.h files serve as a central pin mapping selection file for different processor
    types, i.e. AVR 328p or AVR Mega 2560. Each processor has its own pin mapping file.
    (i.e. cpu_map_atmega328p.h)  Grbl officially supports the Arduino Uno, but the 
    other supplied pin mappings are supplied by users, so your results may vary. */
 
-// NOTE: This is still a work in progress. We are still centralizing the configurations to
+// NOTE: With new processors, only add the define name and filename to use.
-// this file, so your success may vary for other CPUs.
 
 #ifndef cpu_map_h
 #define cpu_map_h
 
 
-//----------------------------------------------------------------------------------------
-
 #ifdef CPU_MAP_ATMEGA328P // (Arduino Uno) Officially supported by Grbl.
-
+  #include "cpu_map/cpu_map_atmega328p.h"
-  #include "cpu_map_atmega328p.h"
-
 #endif
 
-
-//----------------------------------------------------------------------------------------
-
 #ifdef CPU_MAP_ATMEGA2560 // (Arduino Mega 2560) Working @EliteEng
-
+  #include "cpu_map/cpu_map_atmega2560.h"
-  #include "cpu_map_atmega2560.h"
-
 #endif
 
-//----------------------------------------------------------------------------------------
-
 /* 
 #ifdef CPU_MAP_CUSTOM_PROC
-  // For a custom pin map or different processor, copy and edit ne of the default cpu map
+  // For a custom pin map or different processor, copy and edit one of the available cpu
-  // files above and modify it to your needs. Then, copy and paste one of the sections above
+  // map files and modify it to your needs. Make sure the defined name is also changed in
-  // and change the #defined name and included file. Make sure the defined name is also
+  // the config.h file.
-  // changed in the config.h file.
 #endif
 */