ManuelW/grbl-LPC-CoreXY
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity

Set coolant pins for all supported boards in cpu-map.h

Browse Source
This commit is contained in:
cprezzi 2017-08-03 16:00:15 +02:00
parent 4252f75a84
commit 96ad0afdda
2 changed files with 41 additions and 37 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
grbl/config.h
View File

@ -32,8 +32,8 @@
// Define board type for pin map and default settings.
//#define CPU_MAP_SMOOTHIEBOARD // Smoothieboard (NXP LPC1769 MCU)
#define CPU_MAP_C3D_REMIX // Cohesion3D Remix (NXP LPC1769 MCU)
#define CPU_MAP_SMOOTHIEBOARD // Smoothieboard (NXP LPC1769 MCU)
//#define CPU_MAP_C3D_REMIX // Cohesion3D Remix (NXP LPC1769 MCU)
//#define CPU_MAP_C3D_MINI // Cohesion3D Mini (NXP LPC1769 MCU)
//#define CPU_MAP_MKS_SBASE // MKS SBASE Board (NXP LPC1768 MCU)
//#define CPU_MAP_AZTEEG_X5 // Azteeg X5 Board (NXP LPC1769 MCU)
@ -196,7 +196,7 @@
// defined at (http://corexy.com/theory.html). Motors are assumed to positioned and wired exactly as
// described, if not, motions may move in strange directions. Grbl requires the CoreXY A and B motors
// have the same steps per mm internally.
#define COREXY // Default disabled. Uncomment to enable.
//#define COREXY // Default disabled. Uncomment to enable.
// Inverts pin logic of the control command pins based on a mask. This essentially means you can use
// normally-closed switches on the specified pins, rather than the default normally-open switches.

70
grbl/cpu_map.h
View File

@ -195,12 +195,13 @@
#define LIMIT_MASK ((1<<X_LIMIT_BIT)|(1<<Y_LIMIT_BIT)|(1<<Z_LIMIT_BIT)|(1<<A_LIMIT_BIT)) // All limit bits
// Define flood and mist coolant enable output pins.
#define COOLANT_FLOOD_DDR NotUsed
#define COOLANT_FLOOD_PORT NotUsed
#define COOLANT_FLOOD_BIT 6 // MOSFET 2.6
#define COOLANT_MIST_DDR NotUsed
#define COOLANT_MIST_PORT NotUsed
#define COOLANT_MIST_BIT 7 // MOSFET 2.7
#define COOLANT_FLOOD_DDR LPC_GPIO2->FIODIR
#define COOLANT_FLOOD_PORT LPC_GPIO2->FIOPIN
#define COOLANT_FLOOD_BIT 4 // SMALL MOSFET Q8 (P2.4)
#define COOLANT_MIST_DDR LPC_GPIO2->FIODIR
#define COOLANT_MIST_PORT LPC_GPIO2->FIOPIN
#define COOLANT_MIST_BIT 6 // SMALL MOSFET Q9 (P2.6)
#define ENABLE_M7 // enables COOLANT MIST
// Define user-control controls (cycle start, reset, feed hold) input pins.
// NOTE: All CONTROLs pins must be on the same port and not on a port with other input pins (limits).
@ -229,7 +230,7 @@
// PWM Channel PWM1_CH1 PWM1_CH2 PWM1_CH3 PWM1_CH4 PWM1_CH5 PWM1_CH6
// Primary pin P1.18 P1.20 P1.21 P1.23 P1.24 P1.26
// Secondary pin P2.0 P2.1 P2.2 P2.3 P2.4 P2.5
#define SPINDLE_PWM_CHANNEL PWM1_CH6
#define SPINDLE_PWM_CHANNEL PWM1_CH6 // BIG MOSFET Q6 (P2.5)
#define SPINDLE_PWM_USE_PRIMARY_PIN false
#define SPINDLE_PWM_USE_SECONDARY_PIN true
@ -302,10 +303,10 @@
#define COOLANT_FLOOD_DDR LPC_GPIO2->FIODIR
#define COOLANT_FLOOD_PORT LPC_GPIO2->FIOPIN
#define COOLANT_FLOOD_BIT 6 // MOSFET 2.6
#define COOLANT_MIST_DDR LPC_GPIO2->FIODIR
#define COOLANT_MIST_PORT LPC_GPIO2->FIOPIN
#define COOLANT_MIST_BIT 7 // MOSFET 2.7
#define ENABLE_M7 // enables COOLANT MIST
#define COOLANT_MIST_DDR LPC_GPIO2->FIODIR
#define COOLANT_MIST_PORT LPC_GPIO2->FIOPIN
#define COOLANT_MIST_BIT 7 // MOSFET 2.7
#define ENABLE_M7 // enables COOLANT MIST
// Define user-control controls (cycle start, reset, feed hold) input pins.
// NOTE: All CONTROLs pins must be on the same port and not on a port with other input pins (limits).
@ -334,7 +335,7 @@
// PWM Channel PWM1_CH1 PWM1_CH2 PWM1_CH3 PWM1_CH4 PWM1_CH5 PWM1_CH6
// Primary pin P1.18 P1.20 P1.21 P1.23 P1.24 P1.26
// Secondary pin P2.0 P2.1 P2.2 P2.3 P2.4 P2.5
#define SPINDLE_PWM_CHANNEL PWM1_CH6
#define SPINDLE_PWM_CHANNEL PWM1_CH6 // BED MOSFET (P2.5)
#define SPINDLE_PWM_USE_PRIMARY_PIN false
#define SPINDLE_PWM_USE_SECONDARY_PIN true
@ -400,10 +401,11 @@
// Define flood and mist coolant enable output pins.
#define COOLANT_FLOOD_DDR NotUsed
#define COOLANT_FLOOD_PORT NotUsed
#define COOLANT_FLOOD_BIT 3 // Uno Analog Pin 3
#define COOLANT_MIST_DDR NotUsed
#define COOLANT_MIST_PORT NotUsed
#define COOLANT_MIST_BIT 4 // Uno Analog Pin 3
#define COOLANT_FLOOD_BIT 6 // not available
#define COOLANT_MIST_DDR LPC_GPIO2->FIODIR
#define COOLANT_MIST_PORT LPC_GPIO2->FIOPIN
#define COOLANT_MIST_BIT 7 // MOSFET 2 (P2.7)
#define ENABLE_M7 // enables COOLANT MIST
// Define user-control controls (cycle start, reset, feed hold) input pins.
// NOTE: All CONTROLs pins must be on the same port and not on a port with other input pins (limits).
@ -432,7 +434,7 @@
// PWM Channel PWM1_CH1 PWM1_CH2 PWM1_CH3 PWM1_CH4 PWM1_CH5 PWM1_CH6
// Primary pin P1.18 P1.20 P1.21 P1.23 P1.24 P1.26
// Secondary pin P2.0 P2.1 P2.2 P2.3 P2.4 P2.5
#define SPINDLE_PWM_CHANNEL PWM1_CH6
#define SPINDLE_PWM_CHANNEL PWM1_CH6 // BED MOSFET (P2.5)
#define SPINDLE_PWM_USE_PRIMARY_PIN false
#define SPINDLE_PWM_USE_SECONDARY_PIN true
@ -496,12 +498,13 @@
#define LIMIT_MASK ((1<<X_LIMIT_BIT)|(1<<Y_LIMIT_BIT)|(1<<Z_LIMIT_BIT)|(1<<A_LIMIT_BIT)) // All limit bits
// Define flood and mist coolant enable output pins.
#define COOLANT_FLOOD_DDR NotUsed
#define COOLANT_FLOOD_PORT NotUsed
#define COOLANT_FLOOD_BIT 3 // Uno Analog Pin 3
#define COOLANT_MIST_DDR NotUsed
#define COOLANT_MIST_PORT NotUsed
#define COOLANT_MIST_BIT 4 // Uno Analog Pin 3
#define COOLANT_FLOOD_DDR LPC_GPIO2->FIODIR
#define COOLANT_FLOOD_PORT LPC_GPIO2->FIOPIN
#define COOLANT_FLOOD_BIT 6 // MOSFET 2.6
#define COOLANT_MIST_DDR LPC_GPIO2->FIODIR
#define COOLANT_MIST_PORT LPC_GPIO2->FIOPIN
#define COOLANT_MIST_BIT 7 // MOSFET 2.7
#define ENABLE_M7 // enables COOLANT MIST
// Define user-control controls (cycle start, reset, feed hold) input pins.
// NOTE: All CONTROLs pins must be on the same port and not on a port with other input pins (limits).
@ -600,12 +603,13 @@
#define LIMIT_MASK ((1<<X_LIMIT_BIT)|(1<<Y_LIMIT_BIT)|(1<<Z_LIMIT_BIT)|(1<<A_LIMIT_BIT)) // All limit bits
// Define flood and mist coolant enable output pins.
#define COOLANT_FLOOD_DDR NotUsed
#define COOLANT_FLOOD_PORT NotUsed
#define COOLANT_FLOOD_BIT 3 // Uno Analog Pin 3
#define COOLANT_MIST_DDR NotUsed
#define COOLANT_MIST_PORT NotUsed
#define COOLANT_MIST_BIT 4 // Uno Analog Pin 3
#define COOLANT_FLOOD_DDR LPC_GPIO2->FIODIR
#define COOLANT_FLOOD_PORT LPC_GPIO2->FIOPIN
#define COOLANT_FLOOD_BIT 4 // FAN MOSFET (P2.4)
#define COOLANT_MIST_DDR LPC_GPIO2->FIODIR
#define COOLANT_MIST_PORT LPC_GPIO2->FIOPIN
#define COOLANT_MIST_BIT 7 // BED MOSFET (P2.7)
#define ENABLE_M7 // enables COOLANT MIST
// Define user-control controls (cycle start, reset, feed hold) input pins.
// NOTE: All CONTROLs pins must be on the same port and not on a port with other input pins (limits).
@ -631,10 +635,10 @@
// The LPC17xx has 6 PWM channels. Each channel has 2 pins. It can drive both pins simultaneously to the same value.
//
// PWM Channel PWM1_CH1 PWM1_CH2 PWM1_CH3 PWM1_CH4 PWM1_CH5 PWM1_CH6 PWM1_CH7 PWM1_CH8
// Primary pin P1.18 P1.20 P1.21 P1.23 P1.24 P1.26 ? ?
// Secondary pin P2.0 P2.1 P2.2 P2.3 P2.4 P2.5 P2.6 P2.7
#define SPINDLE_PWM_CHANNEL PWM1_CH8
// PWM Channel PWM1_CH1 PWM1_CH2 PWM1_CH3 PWM1_CH4 PWM1_CH5 PWM1_CH6
// Primary pin P1.18 P1.20 P1.21 P1.23 P1.24 P1.26
// Secondary pin P2.0 P2.1 P2.2 P2.3 P2.4 P2.5
#define SPINDLE_PWM_CHANNEL PWM1_CH6 // use Hotend MOSFET (P2.5)
#define SPINDLE_PWM_USE_PRIMARY_PIN false
#define SPINDLE_PWM_USE_SECONDARY_PIN true