ManuelW/grbl-LPC-CoreXY
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity

Update README

Browse Source
This commit is contained in:
Sonny Jeon 2015-08-27 21:41:31 -06:00
parent b3a53a4683
commit 9152d1429c
2 changed files with 67 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
README.md
View File

@ -3,7 +3,7 @@
***
This is the development branch for Grbl v1.0's upcoming release. In general, the new features here are beta, so use with caution. If you'd like to help, please report any bugs or oddities that you find! Thanks!
_**This is the development branch for Grbl v1.0's upcoming release. In general, the new features here are beta, so use with caution. If you'd like to help, please report any bugs or oddities that you find! Thanks!**_
***
@ -26,7 +26,7 @@ Grbl includes full acceleration management with look ahead. That means the contr
***
### Official Supporters of the Grbl CNC Project
[![Carbide3D](http://carbide3d.com/files/logo_240px.png)](http://carbide3d.com) [![Inventables](https://dzevsq2emy08i.cloudfront.net/paperclip/press_image_uploads/62/low_res/inventables-logo.png)](http://inventables.com)
![Official Supporters](https://dl.dropboxusercontent.com/u/2221997/Contributors.png)
***

65
doc/log/commit_log_v0.9i.txt
View File

@ -1,3 +1,68 @@
----------------
Date: 2015-08-27
Author: Sonny Jeon
Subject: v1.0 Beta Release.
- Tons of new stuff in this release, which is fairly stable and well
tested. However, much more is coming soon!
- Real-time parking motion with safety door. When this compile option
is enabled, an opened safety door will cause Grbl to automatically feed
hold, retract, de-energize the spindle/coolant, and parks near Z max.
After the door is closed and resume is commanded, this reverses and the
program continues as if nothing happened. This is also highly
configurable. See config.h for details.
- New spindle max and min rpm ‘$’ settings! This has been requested
often. Grbl will output 5V when commanded to turn on the spindle at its
max rpm, and 0.02V with min rpm. The voltage and the rpm range are
linear to each other. This should help users tweak their settings to
get close to true rpm’s.
- If the new max rpm ‘$’ setting is set = 0 or less than min rpm, the
spindle speed PWM pin will act like a regular on/off spindle enable
pin. On pin D11.
- BEWARE: Your old EEPROM settings will be wiped! The new spindle rpm
settings require a new settings version, so Grbl will automatically
wipe and restore the EEPROM with the new defaults.
- Control pin can now be inverted individually with a
CONTROL_INVERT_MASK in the cpu_map header file. Not typical for users
to need this, but handy to have.
- Fixed bug when Grbl receive too many characters in a line and
overflows. Previously it would respond with an error per overflow
character and another acknowledge upon an EOL character. This broke the
streaming protocol. Now fixed to only respond with an error after an
EOL character.
- Fixed a bug with the safety door during an ALARM mode. You now can’t
home or unlock the axes until the safety door has been closed. This is
for safety reasons (obviously.)
- Tweaked some the Mega2560 cpu_map settings . Increased segment buffer
size and fixed the spindle PWM settings to output at a higher PWM
frequency.
- Generalized the delay function used by G4 delay for use by parking
motion. Allows non-blocking status reports and real-time control during
re-energizing of the spindle and coolant.
- Added spindle rpm max and min defaults to default.h files.
- Added a new print float for rpm values.
----------------
Date: 2015-08-14
Author: Sonny Jeon
Subject: Individual control pin invert compile-option.
- Control pins may be individually inverted through a
CONTROL_INVERT_MASK macro. This mask is define in the cpu_map.h file.
----------------
Date: 2015-07-17
Author: Sonny Jeon