ManuelW/grbl-LPC-CoreXY
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity

Re-organized status messages to be more coherent and centralized.

Browse Source 
- Reorganized all of the status message feedback from both the g-code
parser and settings modules to be centralized into two message modules:
status feedback from executing a line and warnings for misc feedback.

- Pulled out the printPgmString() messages in settings.c and placed it
into the new module. (settings_dump() not moved).

- Some other minor edits. Renaming defines, comment updates, etc.
This commit is contained in:
Sonny Jeon
2012-10-21 16:55:59 -06:00
parent 39e11b696f
commit 909feb7f79
7 changed files with 123 additions and 81 deletions
Download Patch File Download Diff File Expand all files Collapse all files

10
config.h
View File

@ -150,9 +150,10 @@
// of your successes or difficulties, as we will monitor this and possibly integrate this as a
// standard feature for future releases. However, we suggest to first try our direction delay
// hack/solution posted in the Wiki involving inverting the stepper pin mask.
// NOTE: Uncomment to enable. The recommended delay should be > 3us and the total step pulse
// time, which includes the Grbl settings pulse microseconds, should not exceed 127us.
// #define STEP_PULSE_DELAY 5 // Step pulse delay in microseconds. Default disabled.
// NOTE: Uncomment to enable. The recommended delay must be > 3us and the total step pulse
// time, which includes the Grbl settings pulse microseconds, must not exceed 127us. Reported
// successful values for certain setups have ranged from 10 to 20us.
// #define STEP_PULSE_DELAY 10 // Step pulse delay in microseconds. Default disabled.
// ---------------------------------------------------------------------------------------
@ -167,7 +168,8 @@
// entering g-code into grbl, i.e. locating part zero or simple manual machining. If the axes drift,
// grbl has no way to know this has happened, since stepper motors are open-loop control. Depending
// on the machine, this parameter may need to be larger or smaller than the default time.
// NOTE: If the define commented, the stepper lock will be disabled upon compiling.
// NOTE: If set to zero, no lock will occur. If set to max 255, the lock will never release, in other
// words, the steppers never disable for users that require this.
// -> NOW INSTALLED IN SETTINGS #define STEPPER_IDLE_LOCK_TIME 25 // (milliseconds) - Integer > 0