ManuelW/grbl-LPC-CoreXY
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity

Updated README

Browse Source
This commit is contained in:
Sonny Jeon
2015-05-26 10:49:37 -06:00
parent d13f741f7d
commit 8a84f8987d
2 changed files with 6 additions and 11 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
grbl/config.h
View File

@ -163,13 +163,6 @@
// uncomment the config option USE_SPINDLE_DIR_AS_ENABLE_PIN below.
// #define INVERT_SPINDLE_ENABLE_PIN // Default disabled. Uncomment to enable.
// Enable limit pin states feedback in status reports. The data is presented as 0 (low) or 1(high),
// where the order is XYZ. For example, if the Y- and Z-limit pins are active, Grbl will include the
// following string in the status report "Lim:011". This is generally useful for setting up a new
// CNC machine, but we do not recommend keeping this option enabled, as it will consume CPU resources
// with little to no benefit during normal operation and it may not be supported by most GUIs.
// #define REPORT_LIMIT_PIN_STATE // Default disabled. Uncomment to enable.
// Enable control pin states feedback in status reports. The data is presented as simple binary of
// the control pin port (0 (low) or 1(high)), masked to show only the input pins. Non-control pins on the
// port will always show a 0 value. See cpu_map.h for the pin bitmap. As with the limit pin reporting,