ManuelW/grbl-LPC-CoreXY
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity

Merge branch 'master' of https://github.com/cprezzi/grbl-LPC

Browse Source
This commit is contained in:
cprezzi
2019-11-18 14:04:17 +01:00
parent 0721e573ef 04f8621ef9
commit 843c7b01d6
15 changed files with 457 additions and 267 deletions
Download Patch File Download Diff File Expand all files Collapse all files

14
grbl/config.h
View File

@ -38,13 +38,15 @@
//#define CPU_MAP_MKS_SBASE // MKS SBASE Board (NXP LPC1768 MCU)
//#define CPU_MAP_AZTEEG_X5 // Azteeg X5 Board (NXP LPC1769 MCU)
// Force Spincle PWM Pin 2.4 (default is P2.5)
// Force other Spindle PWM Pin (default is P2.5)
//#define SPINDLE_PWM_PIN_1_23
//#define SPINDLE_PWM_PIN_2_4
// Define machine type for machine specific defaults
//#define DEFAULTS_GENERIC
#define DEFAULTS_K40
//#define DEFAULTS_FABKIT
//#define DEFAULTS_JONAS
// Serial baud rate
// #define BAUD_RATE 230400
@ -111,19 +113,19 @@
// on separate pin, but homed in one cycle. Also, it should be noted that the function of hard limits
// will not be affected by pin sharing.
// NOTE: Defaults are set for a traditional 3-axis CNC machine. Z-axis first to clear, followed by X & Y.
//#define HOMING_CYCLE_0 (1<<Z_AXIS) // REQUIRED: First move Z to clear workspace.
//#define HOMING_CYCLE_1 ((1<<X_AXIS)|(1<<Y_AXIS)) // OPTIONAL: Then move X,Y at the same time.
// NOTE: Homing cycle pattern is defined in Machine defaults!!!
// #define HOMING_CYCLE_0 (1<<Z_AXIS) // REQUIRED: First move Z to clear workspace.
// #define HOMING_CYCLE_1 ((1<<X_AXIS)|(1<<Y_AXIS)) // OPTIONAL: Then move X,Y at the same time.
// #define HOMING_CYCLE_2 // OPTIONAL: Uncomment and add axes mask to enable
// NOTE: The following are two examples to setup homing for 2-axis machines.
//#define HOMING_CYCLE_0 ((1<<X_AXIS)|(1<<Y_AXIS)) // NOT COMPATIBLE WITH COREXY: Homes both X-Y in one cycle.
// #define HOMING_CYCLE_0 ((1<<X_AXIS)|(1<<Y_AXIS)) // NOT COMPATIBLE WITH COREXY: Homes both X-Y in one cycle.
// #define HOMING_CYCLE_0 (1<<X_AXIS) // COREXY COMPATIBLE: First home X
// #define HOMING_CYCLE_1 (1<<Y_AXIS) // COREXY COMPATIBLE: Then home Y
// Homing cycle pattern is defined in Machine defaults!!!
// Number of homing cycles performed after when the machine initially jogs to limit switches.
// This help in preventing overshoot and should improve repeatability. This value should be one or
// This helps in preventing overshoot and should improve repeatability. This value should be one or
// greater.
#define N_HOMING_LOCATE_CYCLE 1 // Integer (1-128)