ManuelW/grbl-LPC-CoreXY
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity

Doc re-org. New Grbl Logos!

Browse Source
This commit is contained in:
Sonny Jeon
2015-02-13 18:39:37 -07:00
parent 025caffb2b
commit 565519c144
8 changed files with 137 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
grbl/config.h
View File

@ -54,7 +54,7 @@
#define CMD_FEED_HOLD '!'
#define CMD_CYCLE_START '~'
#define CMD_RESET 0x18 // ctrl-x.
#define CMD_SAFETY_DOOR '@' //0x13 // ctrl-s
#define CMD_SAFETY_DOOR '@'
// If homing is enabled, homing init lock sets Grbl into an alarm state upon power up. This forces
// the user to perform the homing cycle (or override the locks) before doing anything else. This is
@ -143,8 +143,8 @@
// After the safety door switch has been toggled and restored, this setting sets the power-up delay
// between restoring the spindle and coolant and resuming the cycle.
// NOTE: Delay value is defined in milliseconds from zero to 65,535.
#define SAFETY_DOOR_SPINDLE_DELAY 4000 // Disabled by default. Comment to enable.
#define SAFETY_DOOR_COOLANT_DELAY 1000 // Disabled by default. Comment to enable.
#define SAFETY_DOOR_SPINDLE_DELAY 4000
#define SAFETY_DOOR_COOLANT_DELAY 1000
// Enable CoreXY kinematics. Use ONLY with CoreXY machines.
// IMPORTANT: If homing is enabled, you must reconfigure the homing cycle #defines above to