ManuelW/grbl-LPC-CoreXY
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity

Update README.md

Browse Source
This commit is contained in:
Sonny Jeon 2014-11-05 07:52:14 -07:00
parent e0e105a143
commit 429163a033
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
README.md
View File

@ -62,7 +62,7 @@ _Grbl is an open-source project and fueled by the free-time of our intrepid admi
- **Configurable Real-time Status Reporting:** Users can now customize the type of real-time data Grbl reports back when they issue a '?' status report. This includes data such as: machine position, work position, planner buffer usage, serial RX buffer usage. - **Configurable Real-time Status Reporting:** Users can now customize the type of real-time data Grbl reports back when they issue a '?' status report. This includes data such as: machine position, work position, planner buffer usage, serial RX buffer usage.
- **Updated Homing Routine:** Sets workspace volume in all negative space regardless of limit switch position. Common on pro CNCs. But, the behavior may be changed by a compile-time option though. Now tied directly into the main planner and stepper modules to reduce flash space and allow maximum speeds during seeking. - **Updated Homing Routine:** Sets workspace volume in all negative space regardless of limit switch position. Common on pro CNCs. But, the behavior may be changed by a compile-time option though. Now tied directly into the main planner and stepper modules to reduce flash space and allow maximum speeds during seeking.
- **Optional Limit Pin Sharing:** Limit switches can be combined to share the same pins to free up precious I/O pins for other purposes. When combined, users must adjust the homing cycle mask in config.h to not home the axes on a shared pin at the same time. Don't worry; hard limits and the homing cycle still work just like they did before. - **Optional Limit Pin Sharing:** Limit switches can be combined to share the same pins to free up precious I/O pins for other purposes. When combined, users must adjust the homing cycle mask in config.h to not home the axes on a shared pin at the same time. Don't worry; hard limits and the homing cycle still work just like they did before.
- **Optional Variable Spindle Speed Output:** Available only as a compile-time option through the config.h file. Enables PWM output for 'S' g-code commands. Enabling this feature will swap the Z-limit D11 pin and spindle enable D12 pin to access the hardware PWM on pin D12. The Z-limit pin, now on D12, should work just as it did before. - **Optional Variable Spindle Speed Output:** Available only as a compile-time option through the config.h file. Enables PWM output for 'S' g-code commands. Enabling this feature will swap the Z-limit D11 pin and spindle enable D12 pin to access the hardware PWM on pin D11. The Z-limit pin, now on D12, should work just as it did before.
- **Additional Compile-Time Feature Options:** Line number tracking, real-time feed rate reporting. - **Additional Compile-Time Feature Options:** Line number tracking, real-time feed rate reporting.
- **SLATED FOR v1.0 DEVELOPMENT** Jogging controls and feedrate/spindle/coolant overrides. (In v0.9, the framework for feedrate overrides are in-place, only the minor details to complete it have yet to be installed.) - **SLATED FOR v1.0 DEVELOPMENT** Jogging controls and feedrate/spindle/coolant overrides. (In v0.9, the framework for feedrate overrides are in-place, only the minor details to complete it have yet to be installed.)