From 33c6659523484759b773253528580d8feaadc899 Mon Sep 17 00:00:00 2001 From: Sonny Jeon Date: Tue, 19 Mar 2013 11:43:11 -0600 Subject: [PATCH] Update README.md --- README.md | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/README.md b/README.md index 286c634..0b858c7 100644 --- a/README.md +++ b/README.md @@ -11,9 +11,10 @@ Grbl includes full acceleration management with look ahead. That means the contr ##Downloads (Right-Click and Save-Link-As): _**Master Branch:**_ -* [Grbl v0.8c Atmega328p 16mhz 9600baud](http://bit.ly/SSdCJE) Last updated: 2013-01-06 +* [Grbl v0.8c Atmega328p 16mhz 9600baud](http://bit.ly/SSdCJE) Last updated: 2013-03-19 _**Edge/Development Branch:**_ +* [Grbl v0.9a Build 2013-03-19](http://bit.ly/Y0tMHo) : Updated g-code G10. * [Grbl v0.9a Build 2012-12-21](http://bit.ly/VWe4VW) : For testing only. New experimental stepper algorithm. Smoother. Axes acceleration and maximum velocity limits. Automatic arc segment scaling by tolerance setting, leading to much faster feedrates about them. 30kHz step rate absolute max. CAUTION: Bugs still exist. Settings WILL be over-written. Please let us know of any lingering bugs (except with homing). _**Archives:**_ @@ -51,4 +52,4 @@ _**Archives:**_ *Important note for Atmega 168 users:* Going forward, support for Atmega 168 will be dropped due to its limited memory and speed. However, legacy Grbl v0.51 "in the branch called 'v0_51' is still available for use. -_The project was initially inspired by the Arduino GCode Interpreter by Mike Ellery_ \ No newline at end of file +_The project was initially inspired by the Arduino GCode Interpreter by Mike Ellery_