diff --git a/README.md b/README.md
index 5edbf08..1183789 100644
--- a/README.md
+++ b/README.md
@@ -21,8 +21,8 @@ Grbl includes full acceleration management with look ahead. That means the contr
 ***
 
 _**Master Branch:**_
-* [Grbl v0.9g Atmega328p 16mhz 115200baud with generic defaults](http://bit.ly/1m8E1Qa) _(2014-08-17)_
-* [Grbl v0.9g Atmega328p 16mhz 115200baud with ShapeOko2 defaults](http://bit.ly/1kOAzig) _(2014-08-17)_
+* [Grbl v0.9g Atmega328p 16mhz 115200baud with generic defaults](http://bit.ly/1m8E1Qa) _(2014-09-05)_
+* [Grbl v0.9g Atmega328p 16mhz 115200baud with ShapeOko2 defaults](http://bit.ly/1kOAzig) _(2014-09-05)_
   - **IMPORTANT INFO WHEN UPGRADING TO GRBL v0.9g:** 
   - Baudrate is now **115200** (Up from 9600). 
   - Settings WILL be overwritten. Please make sure you have a backup. Also, settings have been renumbered and some have changed how they work. See our [Configuring v0.9 Wiki page](https://github.com/grbl/grbl/wiki/Configuring-Grbl-v0.9) for details.
diff --git a/config.h b/config.h
index 1319519..b3dcbbd 100644
--- a/config.h
+++ b/config.h
@@ -43,7 +43,7 @@
 
 // Default cpu mappings. Grbl officially supports the Arduino Uno only. Other processor types
 // may exist from user-supplied templates or directly user-defined in cpu_map.h
-#define CPU_MAP_ATMEGA328P // Arduino Uno CPU
+#define CPU_MAP_ATMEGA328P_TRADITIONAL // Arduino Uno CPU
 
 // Define runtime command special characters. These characters are 'picked-off' directly from the
 // serial read data stream and are not passed to the grbl line execution parser. Select characters
diff --git a/cpu_map.h b/cpu_map.h
index 993bcb5..00b799f 100644
--- a/cpu_map.h
+++ b/cpu_map.h
@@ -28,9 +28,10 @@
 #ifndef cpu_map_h
 #define cpu_map_h
 
+
 //----------------------------------------------------------------------------------------
 
-#ifdef CPU_MAP_ATMEGA328P // (Arduino Uno) Officially supported by Grbl.
+#ifdef CPU_MAP_ATMEGA328P_TRADITIONAL // (Arduino Uno) Officially supported by Grbl.
 
   // Define serial port pins and interrupt vectors.
   #define SERIAL_RX     USART_RX_vect
@@ -140,6 +141,119 @@
 
 #endif
 
+
+//----------------------------------------------------------------------------------------
+
+#ifdef CPU_MAP_ATMEGA328P_NEW // (Arduino Uno) New test pinout configuration. Still subject to change!
+
+  // Define serial port pins and interrupt vectors.
+  #define SERIAL_RX     USART_RX_vect
+  #define SERIAL_UDRE   USART_UDRE_vect
+
+  // Define step pulse output pins. NOTE: All step bit pins must be on the same port.
+  #define STEP_DDR        DDRD
+  #define STEP_PORT       PORTD
+  #define X_STEP_BIT      2  // Uno Digital Pin 2
+  #define Y_STEP_BIT      3  // Uno Digital Pin 3
+  #define Z_STEP_BIT      4  // Uno Digital Pin 4
+  #define STEP_MASK       ((1<<X_STEP_BIT)|(1<<Y_STEP_BIT)|(1<<Z_STEP_BIT)) // All step bits
+
+  // Define step direction output pins. NOTE: All direction pins must be on the same port.
+  #define DIRECTION_DDR     DDRD
+  #define DIRECTION_PORT    PORTD
+  #define X_DIRECTION_BIT   5  // Uno Digital Pin 5
+  #define Y_DIRECTION_BIT   6  // Uno Digital Pin 6
+  #define Z_DIRECTION_BIT   7  // Uno Digital Pin 7
+  #define DIRECTION_MASK    ((1<<X_DIRECTION_BIT)|(1<<Y_DIRECTION_BIT)|(1<<Z_DIRECTION_BIT)) // All direction bits
+
+  // Define stepper driver enable/disable output pin.
+  #define STEPPERS_DISABLE_DDR    DDRB
+  #define STEPPERS_DISABLE_PORT   PORTB
+  #define STEPPERS_DISABLE_BIT    0  // Uno Digital Pin 8
+  #define STEPPERS_DISABLE_MASK   (1<<STEPPERS_DISABLE_BIT)
+
+  // Define homing/hard limit switch input pins and limit interrupt vectors. 
+  // NOTE: All limit bit pins must be on the same port, but not on a port with other input pins (pinout).
+  #define LIMIT_DDR        DDRB
+  #define LIMIT_PIN        PINB
+  #define LIMIT_PORT       PORTB
+  #define X_LIMIT_BIT      1  // Uno Digital Pin 9
+  #define Y_LIMIT_BIT      2  // Uno Digital Pin 10
+  #ifdef VARIABLE_SPINDLE // Z Limit pin and spindle enabled swapped to access hardware PWM on Pin 11.  
+    #define Z_LIMIT_BIT	   4 // Uno Digital Pin 12
+  #else
+    #define Z_LIMIT_BIT    3  // Uno Digital Pin 11
+  #endif
+  #define LIMIT_MASK       ((1<<X_LIMIT_BIT)|(1<<Y_LIMIT_BIT)|(1<<Z_LIMIT_BIT)) // All limit bits
+  #define LIMIT_INT        PCIE0  // Pin change interrupt enable pin
+  #define LIMIT_INT_vect   PCINT0_vect 
+  #define LIMIT_PCMSK      PCMSK0 // Pin change interrupt register
+
+  // Define spindle enable and spindle direction output pins.
+  #define SPINDLE_ENABLE_DDR    DDRB
+  #define SPINDLE_ENABLE_PORT   PORTB
+  #ifdef VARIABLE_SPINDLE // Z Limit pin and spindle enabled swapped to access hardware PWM on Pin 11.  
+    #define SPINDLE_ENABLE_BIT    3  // Uno Digital Pin 11
+  #else
+    #define SPINDLE_ENABLE_BIT    4  // Uno Digital Pin 12
+  #endif  
+  #define SPINDLE_DIRECTION_DDR   DDRB
+  #define SPINDLE_DIRECTION_PORT  PORTB
+  #define SPINDLE_DIRECTION_BIT   5  // Uno Digital Pin 13 (NOTE: D13 can't be pulled-high input due to LED.)
+
+  // Define flood and mist coolant enable output pins.
+  // NOTE: Uno analog pins 4 and 5 are reserved for an i2c interface, and may be installed at
+  // a later date if flash and memory space allows.
+  #define COOLANT_FLOOD_DDR   DDRC
+  #define COOLANT_FLOOD_PORT  PORTC
+  #define COOLANT_FLOOD_BIT   4  // Uno Analog Pin 3
+  #ifdef ENABLE_M7 // Mist coolant disabled by default. See config.h to enable/disable.
+    #define COOLANT_MIST_DDR   DDRC
+    #define COOLANT_MIST_PORT  PORTC
+    #define COOLANT_MIST_BIT   5 // Uno Analog Pin 4
+  #endif  
+
+  // Define user-control pinouts (cycle start, reset, feed hold) input pins.
+  // NOTE: All pinouts pins must be on the same port and not on a port with other input pins (limits).
+  #define PINOUT_DDR       DDRC
+  #define PINOUT_PIN       PINC
+  #define PINOUT_PORT      PORTC
+  #define PIN_RESET        1  // Uno Analog Pin 1
+  #define PIN_FEED_HOLD    2  // Uno Analog Pin 2
+  #define PIN_CYCLE_START  3  // Uno Analog Pin 3
+  #define PINOUT_INT       PCIE1  // Pin change interrupt enable pin
+  #define PINOUT_INT_vect  PCINT1_vect
+  #define PINOUT_PCMSK     PCMSK1 // Pin change interrupt register
+  #define PINOUT_MASK ((1<<PIN_RESET)|(1<<PIN_FEED_HOLD)|(1<<PIN_CYCLE_START))
+  
+  // Define probe switch input pin.
+  #define PROBE_DDR       DDRC
+  #define PROBE_PIN       PINC
+  #define PROBE_PORT      PORTC
+  #define PROBE_BIT       0  // Uno Analog Pin 0
+  #define PROBE_MASK      (1<<PROBE_BIT)
+
+  
+  #ifdef VARIABLE_SPINDLE
+    // Advanced Configuration Below You should not need to touch these variables
+    #define TCCRA_REGISTER	 TCCR2A
+    #define TCCRB_REGISTER	 TCCR2B
+    #define OCR_REGISTER     OCR2A
+
+    #define COMB_BIT	     COM2A1
+    #define WAVE0_REGISTER	 WGM20
+    #define WAVE1_REGISTER	 WGM21
+    #define WAVE2_REGISTER	 WGM22
+    #define WAVE3_REGISTER	 WGM23
+
+    // NOTE: On the 328p, these must be the same as the SPINDLE_ENABLE settings.
+    #define SPINDLE_PWM_DDR	  SPINDLE_ENABLE_DDR
+    #define SPINDLE_PWM_PORT  SPINDLE_ENABLE_PORT
+    #define SPINDLE_PWM_BIT	  SPINDLE_ENABLE_BIT // Shared with SPINDLE_ENABLE.
+  #endif // End of VARIABLE_SPINDLE
+
+#endif
+
 //----------------------------------------------------------------------------------------
 
 #ifdef CPU_MAP_ATMEGA2560 // (Arduino Mega 2560) Working @EliteEng
diff --git a/defaults.h b/defaults.h
index 68119ba..834f21b 100644
--- a/defaults.h
+++ b/defaults.h
@@ -62,6 +62,8 @@
   #define DEFAULT_HOMING_PULLOFF 1.0 // mm
 #endif
 
+
+
 #ifdef DEFAULTS_SHERLINE_5400
   // Description: Sherline 5400 mill with three NEMA 23 Keling  KL23H256-21-8B 185 oz-in stepper motors,
   // driven by three Pololu A4988 stepper drivers with a 30V, 6A power supply at 1.5A per winding.
@@ -225,4 +227,40 @@
   #define DEFAULT_HOMING_PULLOFF 1.0 // mm
 #endif
 
+#ifdef DEFAULTS_OXCNC
+  // Grbl settings for OpenBuilds OX CNC Machine
+  // http://www.openbuilds.com/builds/openbuilds-ox-cnc-machine.341/
+  #define DEFAULT_X_STEPS_PER_MM 26.670
+  #define DEFAULT_Y_STEPS_PER_MM 26.670
+  #define DEFAULT_Z_STEPS_PER_MM 50
+  #define DEFAULT_X_MAX_RATE 500.0 // mm/min
+  #define DEFAULT_Y_MAX_RATE 500.0 // mm/min
+  #define DEFAULT_Z_MAX_RATE 500.0 // mm/min
+  #define DEFAULT_X_ACCELERATION (10.0*60*60) // 10*60*60 mm/min^2 = 10 mm/sec^2
+  #define DEFAULT_Y_ACCELERATION (10.0*60*60) // 10*60*60 mm/min^2 = 10 mm/sec^2
+  #define DEFAULT_Z_ACCELERATION (10.0*60*60) // 10*60*60 mm/min^2 = 10 mm/sec^2
+  #define DEFAULT_X_MAX_TRAVEL 500.0 // mm
+  #define DEFAULT_Y_MAX_TRAVEL 750.0 // mm
+  #define DEFAULT_Z_MAX_TRAVEL 80.0 // mm
+  #define DEFAULT_STEP_PULSE_MICROSECONDS 10
+  #define DEFAULT_STEPPING_INVERT_MASK 0
+  #define DEFAULT_DIRECTION_INVERT_MASK 0
+  #define DEFAULT_STEPPER_IDLE_LOCK_TIME 25 // msec (0-254, 255 keeps steppers enabled)
+  #define DEFAULT_STATUS_REPORT_MASK ((BITFLAG_RT_STATUS_MACHINE_POSITION)|(BITFLAG_RT_STATUS_WORK_POSITION))
+  #define DEFAULT_JUNCTION_DEVIATION 0.02 // mm
+  #define DEFAULT_ARC_TOLERANCE 0.002 // mm
+  #define DEFAULT_REPORT_INCHES 0 // false
+  #define DEFAULT_AUTO_START 1 // true
+  #define DEFAULT_INVERT_ST_ENABLE 0 // false
+  #define DEFAULT_INVERT_LIMIT_PINS 0 // false
+  #define DEFAULT_SOFT_LIMIT_ENABLE 0 // false
+  #define DEFAULT_HARD_LIMIT_ENABLE 0  // false
+  #define DEFAULT_HOMING_ENABLE 0  // false
+  #define DEFAULT_HOMING_DIR_MASK 0 // move positive dir
+  #define DEFAULT_HOMING_FEED_RATE 25.0 // mm/min
+  #define DEFAULT_HOMING_SEEK_RATE 500.0 // mm/min
+  #define DEFAULT_HOMING_DEBOUNCE_DELAY 250 // msec (0-65k)
+  #define DEFAULT_HOMING_PULLOFF 1.0 // mm
+#endif
+
 #endif
diff --git a/settings.c b/settings.c
index 884424c..990955a 100644
--- a/settings.c
+++ b/settings.c
@@ -241,7 +241,7 @@ uint8_t settings_store_global_setting(uint8_t parameter, float value) {
         if (int_value) { settings.flags |= BITFLAG_INVERT_PROBE_PIN; }
         else { settings.flags &= ~BITFLAG_INVERT_PROBE_PIN; }
         break;
-      case 10: settings.status_report_mask = int_value;
+      case 10: settings.status_report_mask = int_value; break;
       case 11: settings.junction_deviation = value; break;
       case 12: settings.arc_tolerance = value; break;
       case 13:
diff --git a/settings.h b/settings.h
index 3465ad8..1d63e38 100644
--- a/settings.h
+++ b/settings.h
@@ -29,7 +29,7 @@
 
 
 #define GRBL_VERSION "0.9g"
-#define GRBL_VERSION_BUILD "20140822"
+#define GRBL_VERSION_BUILD "20140905"
 
 // Version of the EEPROM data. Will be used to migrate existing data from older versions of Grbl
 // when firmware is upgraded. Always stored in byte 0 of eeprom
diff --git a/test/gcode/HSM_test.nc b/test/gcode/HSM_test.nc
new file mode 100644
index 0000000..7a2166d
--- /dev/null
+++ b/test/gcode/HSM_test.nc
@@ -0,0 +1,1758 @@
+(DO NOT USE WHEN CONNECTED TO A MACHINE!!)
+(EXCEEDINGLY FAST HIGH-SPEED POCKETING ROUTINE)
+(NC program provided by Todd Fleming)
+
+G90
+G1 X0 Y0 F200.00000
+G1 Z0 F200.00000
+
+G1 Z-6.00000
+
+(Slow cut small circle)
+
+G1 X1.58750 F100.00000
+G1
+G1 X1.58437 Y0.09968
+G1 X1.57498 Y0.19897
+G1 X1.55938 Y0.29747
+G1 X1.53763 Y0.39480
+G1 X1.50980 Y0.49056
+G1 X1.47602 Y0.58440
+G1 X1.43641 Y0.67592
+G1 X1.39114 Y0.76478
+G1 X1.34037 Y0.85063
+G1 X1.28431 Y0.93311
+G1 X1.22319 Y1.01191
+G1 X1.15724 Y1.08672
+G1 X1.08672 Y1.15724
+G1 X1.01191 Y1.22319
+G1 X0.93311 Y1.28431
+G1 X0.85063 Y1.34037
+G1 X0.76478 Y1.39114
+G1 X0.67592 Y1.43641
+G1 X0.58440 Y1.47602
+G1 X0.49056 Y1.50980
+G1 X0.39480 Y1.53763
+G1 X0.29747 Y1.55938
+G1 X0.19897 Y1.57498
+G1 X0.09968 Y1.58437
+G1 X0.00000 Y1.58750
+G1 X-0.09968 Y1.58437
+G1 X-0.19897 Y1.57498
+G1 X-0.29747 Y1.55938
+G1 X-0.39480 Y1.53763
+G1 X-0.49056 Y1.50980
+G1 X-0.58440 Y1.47602
+G1 X-0.67592 Y1.43641
+G1 X-0.76478 Y1.39114
+G1 X-0.85063 Y1.34037
+G1 X-0.93311 Y1.28431
+G1 X-1.01191 Y1.22319
+G1 X-1.08672 Y1.15724
+G1 X-1.15724 Y1.08672
+G1 X-1.22319 Y1.01191
+G1 X-1.28431 Y0.93311
+G1 X-1.34037 Y0.85063
+G1 X-1.39114 Y0.76478
+G1 X-1.43641 Y0.67592
+G1 X-1.47602 Y0.58440
+G1 X-1.50980 Y0.49056
+G1 X-1.53763 Y0.39480
+G1 X-1.55938 Y0.29747
+G1 X-1.57498 Y0.19897
+G1 X-1.58437 Y0.09968
+G1 X-1.58750 Y0.00000
+G1 X-1.58437 Y-0.09968
+G1 X-1.57498 Y-0.19897
+G1 X-1.55938 Y-0.29747
+G1 X-1.53763 Y-0.39480
+G1 X-1.50980 Y-0.49056
+G1 X-1.47602 Y-0.58440
+G1 X-1.43641 Y-0.67592
+G1 X-1.39114 Y-0.76478
+G1 X-1.34037 Y-0.85063
+G1 X-1.28431 Y-0.93311
+G1 X-1.22319 Y-1.01191
+G1 X-1.15724 Y-1.08672
+G1 X-1.08672 Y-1.15724
+G1 X-1.01191 Y-1.22319
+G1 X-0.93311 Y-1.28431
+G1 X-0.85063 Y-1.34037
+G1 X-0.76478 Y-1.39114
+G1 X-0.67592 Y-1.43641
+G1 X-0.58440 Y-1.47602
+G1 X-0.49056 Y-1.50980
+G1 X-0.39480 Y-1.53763
+G1 X-0.29747 Y-1.55938
+G1 X-0.19897 Y-1.57498
+G1 X-0.09968 Y-1.58437
+G1 X-0.00000 Y-1.58750
+G1 X0.09968 Y-1.58437
+G1 X0.19897 Y-1.57498
+G1 X0.29747 Y-1.55938
+G1 X0.39480 Y-1.53763
+G1 X0.49056 Y-1.50980
+G1 X0.58440 Y-1.47602
+G1 X0.67592 Y-1.43641
+G1 X0.76478 Y-1.39114
+G1 X0.85063 Y-1.34037
+G1 X0.93311 Y-1.28431
+G1 X1.01191 Y-1.22319
+G1 X1.08672 Y-1.15724
+G1 X1.15724 Y-1.08672
+G1 X1.22319 Y-1.01191
+G1 X1.28431 Y-0.93311
+G1 X1.34037 Y-0.85063
+G1 X1.39114 Y-0.76478
+G1 X1.43641 Y-0.67592
+G1 X1.47602 Y-0.58440
+G1 X1.50980 Y-0.49056
+G1 X1.53763 Y-0.39480
+G1 X1.55938 Y-0.29747
+G1 X1.57498 Y-0.19897
+G1 X1.58437 Y-0.09968
+G1 X1.58750 Y-0.00000
+G1 X0.00000 Y0.00000 F500.00000
+
+(Spiral)
+
+G1 F15000.00000
+G1 X0.00549 Y0.00035
+G1 X0.01091 Y0.00138
+G1 X0.01621 Y0.00309
+G1 X0.02131 Y0.00547
+G1 X0.02615 Y0.00850
+G1 X0.03068 Y0.01215
+G1 X0.03484 Y0.01639
+G1 X0.03856 Y0.02120
+G1 X0.04179 Y0.02652
+G1 X0.04450 Y0.03233
+G1 X0.04662 Y0.03856
+G1 X0.04811 Y0.04518
+G1 X0.04895 Y0.05212
+G1 X0.04908 Y0.05933
+G1 X0.04849 Y0.06674
+G1 X0.04715 Y0.07430
+G1 X0.04504 Y0.08193
+G1 X0.04215 Y0.08958
+G1 X0.03847 Y0.09716
+G1 X0.03399 Y0.10462
+G1 X0.02872 Y0.11187
+G1 X0.02267 Y0.11886
+G1 X0.01585 Y0.12550
+G1 X0.00829 Y0.13174
+G1 X-0.00000 Y0.13750
+G1 X-0.00898 Y0.14272
+G1 X-0.01861 Y0.14733
+G1 X-0.02886 Y0.15127
+G1 X-0.03967 Y0.15449
+G1 X-0.05099 Y0.15692
+G1 X-0.06277 Y0.15853
+G1 X-0.07494 Y0.15925
+G1 X-0.08744 Y0.15905
+G1 X-0.10020 Y0.15789
+G1 X-0.11315 Y0.15574
+G1 X-0.12621 Y0.15256
+G1 X-0.13931 Y0.14835
+G1 X-0.15235 Y0.14307
+G1 X-0.16528 Y0.13673
+G1 X-0.17798 Y0.12931
+G1 X-0.19040 Y0.12083
+G1 X-0.20243 Y0.11129
+G1 X-0.21399 Y0.10070
+G1 X-0.22501 Y0.08909
+G1 X-0.23539 Y0.07648
+G1 X-0.24505 Y0.06292
+G1 X-0.25392 Y0.04844
+G1 X-0.26192 Y0.03309
+G1 X-0.26897 Y0.01692
+G1 X-0.27500 Y-0.00000
+G1 X-0.27995 Y-0.01761
+G1 X-0.28374 Y-0.03585
+G1 X-0.28634 Y-0.05462
+G1 X-0.28767 Y-0.07386
+G1 X-0.28769 Y-0.09348
+G1 X-0.28637 Y-0.11338
+G1 X-0.28366 Y-0.13348
+G1 X-0.27954 Y-0.15368
+G1 X-0.27398 Y-0.17388
+G1 X-0.26698 Y-0.19397
+G1 X-0.25851 Y-0.21386
+G1 X-0.24858 Y-0.23343
+G1 X-0.23720 Y-0.25259
+G1 X-0.22437 Y-0.27122
+G1 X-0.21013 Y-0.28922
+G1 X-0.19451 Y-0.30649
+G1 X-0.17753 Y-0.32292
+G1 X-0.15924 Y-0.33841
+G1 X-0.13970 Y-0.35285
+G1 X-0.11897 Y-0.36616
+G1 X-0.09711 Y-0.37823
+G1 X-0.07420 Y-0.38899
+G1 X-0.05032 Y-0.39833
+G1 X-0.02556 Y-0.40620
+G1 X-0.00000 Y-0.41250
+G1 X0.02625 Y-0.41718
+G1 X0.05308 Y-0.42016
+G1 X0.08039 Y-0.42140
+G1 X0.10806 Y-0.42085
+G1 X0.13597 Y-0.41846
+G1 X0.16400 Y-0.41422
+G1 X0.19203 Y-0.40808
+G1 X0.21992 Y-0.40003
+G1 X0.24755 Y-0.39008
+G1 X0.27479 Y-0.37822
+G1 X0.30150 Y-0.36445
+G1 X0.32756 Y-0.34881
+G1 X0.35282 Y-0.33132
+G1 X0.37717 Y-0.31202
+G1 X0.40046 Y-0.29095
+G1 X0.42259 Y-0.26818
+G1 X0.44341 Y-0.24377
+G1 X0.46282 Y-0.21779
+G1 X0.48069 Y-0.19032
+G1 X0.49693 Y-0.16146
+G1 X0.51141 Y-0.13131
+G1 X0.52405 Y-0.09997
+G1 X0.53475 Y-0.06755
+G1 X0.54343 Y-0.03419
+G1 X0.55000 Y-0.00000
+G1 X0.55440 Y0.03488
+G1 X0.55658 Y0.07031
+G1 X0.55647 Y0.10615
+G1 X0.55403 Y0.14225
+G1 X0.54924 Y0.17846
+G1 X0.54206 Y0.21462
+G1 X0.53249 Y0.25057
+G1 X0.52053 Y0.28616
+G1 X0.50617 Y0.32123
+G1 X0.48946 Y0.35561
+G1 X0.47040 Y0.38915
+G1 X0.44904 Y0.42168
+G1 X0.42545 Y0.45305
+G1 X0.39966 Y0.48311
+G1 X0.37177 Y0.51170
+G1 X0.34186 Y0.53868
+G1 X0.31001 Y0.56390
+G1 X0.27633 Y0.58723
+G1 X0.24094 Y0.60854
+G1 X0.20395 Y0.62770
+G1 X0.16550 Y0.64459
+G1 X0.12573 Y0.65911
+G1 X0.08479 Y0.67117
+G1 X0.04282 Y0.68065
+G1 X0.00000 Y0.68750
+G1 X-0.04351 Y0.69163
+G1 X-0.08755 Y0.69299
+G1 X-0.13192 Y0.69153
+G1 X-0.17645 Y0.68721
+G1 X-0.22095 Y0.68001
+G1 X-0.26523 Y0.66990
+G1 X-0.30912 Y0.65690
+G1 X-0.35240 Y0.64102
+G1 X-0.39490 Y0.62227
+G1 X-0.43643 Y0.60070
+G1 X-0.47679 Y0.57634
+G1 X-0.51581 Y0.54928
+G1 X-0.55329 Y0.51957
+G1 X-0.58906 Y0.48731
+G1 X-0.62294 Y0.45259
+G1 X-0.65478 Y0.41553
+G1 X-0.68440 Y0.37625
+G1 X-0.71165 Y0.33488
+G1 X-0.73638 Y0.29155
+G1 X-0.75847 Y0.24644
+G1 X-0.77777 Y0.19970
+G1 X-0.79418 Y0.15150
+G1 X-0.80758 Y0.10202
+G1 X-0.81788 Y0.05146
+G1 X-0.82500 Y0.00000
+G1 X-0.82886 Y-0.05215
+G1 X-0.82941 Y-0.10478
+G1 X-0.82659 Y-0.15768
+G1 X-0.82039 Y-0.21064
+G1 X-0.81078 Y-0.26344
+G1 X-0.79775 Y-0.31585
+G1 X-0.78132 Y-0.36766
+G1 X-0.76151 Y-0.41864
+G1 X-0.73836 Y-0.46858
+G1 X-0.71193 Y-0.51725
+G1 X-0.68229 Y-0.56444
+G1 X-0.64951 Y-0.60993
+G1 X-0.61370 Y-0.65352
+G1 X-0.57496 Y-0.69500
+G1 X-0.53342 Y-0.73418
+G1 X-0.48921 Y-0.77087
+G1 X-0.44249 Y-0.80489
+G1 X-0.39342 Y-0.83606
+G1 X-0.34217 Y-0.86423
+G1 X-0.28893 Y-0.88924
+G1 X-0.23389 Y-0.91095
+G1 X-0.17726 Y-0.92924
+G1 X-0.11925 Y-0.94400
+G1 X-0.06009 Y-0.95511
+G1 X-0.00000 Y-0.96250
+G1 X0.06078 Y-0.96609
+G1 X0.12201 Y-0.96582
+G1 X0.18345 Y-0.96166
+G1 X0.24484 Y-0.95357
+G1 X0.30593 Y-0.94155
+G1 X0.36647 Y-0.92559
+G1 X0.42621 Y-0.90573
+G1 X0.48489 Y-0.88200
+G1 X0.54226 Y-0.85446
+G1 X0.59807 Y-0.82317
+G1 X0.65208 Y-0.78824
+G1 X0.70406 Y-0.74974
+G1 X0.75375 Y-0.70782
+G1 X0.80095 Y-0.66260
+G1 X0.84542 Y-0.61424
+G1 X0.88697 Y-0.56289
+G1 X0.92538 Y-0.50873
+G1 X0.96047 Y-0.45196
+G1 X0.99207 Y-0.39279
+G1 X1.02001 Y-0.33142
+G1 X1.04413 Y-0.26809
+G1 X1.06431 Y-0.20303
+G1 X1.08041 Y-0.13649
+G1 X1.09234 Y-0.06872
+G1 X1.10000 Y-0.00000
+G1 X1.10332 Y0.06941
+G1 X1.10224 Y0.13925
+G1 X1.09672 Y0.20921
+G1 X1.08675 Y0.27903
+G1 X1.07232 Y0.34842
+G1 X1.05344 Y0.41709
+G1 X1.03015 Y0.48475
+G1 X1.00249 Y0.55113
+G1 X0.97055 Y0.61593
+G1 X0.93441 Y0.67889
+G1 X0.89418 Y0.73973
+G1 X0.84998 Y0.79818
+G1 X0.80195 Y0.85399
+G1 X0.75025 Y0.90689
+G1 X0.69506 Y0.95666
+G1 X0.63656 Y1.00306
+G1 X0.57497 Y1.04587
+G1 X0.51051 Y1.08489
+G1 X0.44341 Y1.11992
+G1 X0.37391 Y1.15078
+G1 X0.30228 Y1.17731
+G1 X0.22879 Y1.19937
+G1 X0.15372 Y1.21683
+G1 X0.07736 Y1.22957
+G1 X0.00000 Y1.23750
+G1 X-0.07805 Y1.24055
+G1 X-0.15648 Y1.23866
+G1 X-0.23498 Y1.23179
+G1 X-0.31322 Y1.21993
+G1 X-0.39091 Y1.20309
+G1 X-0.46770 Y1.18128
+G1 X-0.54329 Y1.15456
+G1 X-0.61737 Y1.12299
+G1 X-0.68961 Y1.08665
+G1 X-0.75971 Y1.04565
+G1 X-0.82738 Y1.00013
+G1 X-0.89231 Y0.95021
+G1 X-0.95422 Y0.89607
+G1 X-1.01284 Y0.83789
+G1 X-1.06790 Y0.77588
+G1 X-1.11916 Y0.71024
+G1 X-1.16636 Y0.64121
+G1 X-1.20930 Y0.56905
+G1 X-1.24776 Y0.49402
+G1 X-1.28155 Y0.41640
+G1 X-1.31049 Y0.33648
+G1 X-1.33444 Y0.25456
+G1 X-1.35324 Y0.17095
+G1 X-1.36680 Y0.08599
+G1 X-1.37500 Y0.00000
+G1 X-1.37778 Y-0.08668
+G1 X-1.37507 Y-0.17371
+G1 X-1.36685 Y-0.26074
+G1 X-1.35311 Y-0.34742
+G1 X-1.33386 Y-0.43340
+G1 X-1.30913 Y-0.51832
+G1 X-1.27897 Y-0.60184
+G1 X-1.24348 Y-0.68361
+G1 X-1.20275 Y-0.76329
+G1 X-1.15689 Y-0.84053
+G1 X-1.10607 Y-0.91502
+G1 X-1.05044 Y-0.98643
+G1 X-0.99020 Y-1.05445
+G1 X-0.92554 Y-1.11879
+G1 X-0.85670 Y-1.17914
+G1 X-0.78391 Y-1.23525
+G1 X-0.70746 Y-1.28686
+G1 X-0.62760 Y-1.33372
+G1 X-0.54464 Y-1.37560
+G1 X-0.45889 Y-1.41232
+G1 X-0.37067 Y-1.44367
+G1 X-0.28032 Y-1.46950
+G1 X-0.18819 Y-1.48966
+G1 X-0.09463 Y-1.50403
+G1 X-0.00000 Y-1.51250
+G1 X0.09532 Y-1.51500
+G1 X0.19095 Y-1.51149
+G1 X0.28651 Y-1.50192
+G1 X0.38161 Y-1.48629
+G1 X0.47589 Y-1.46463
+G1 X0.56894 Y-1.43697
+G1 X0.66038 Y-1.40339
+G1 X0.74985 Y-1.36397
+G1 X0.83696 Y-1.31884
+G1 X0.92135 Y-1.26813
+G1 X1.00267 Y-1.21202
+G1 X1.08056 Y-1.15068
+G1 X1.15469 Y-1.08432
+G1 X1.22473 Y-1.01319
+G1 X1.29038 Y-0.93752
+G1 X1.35135 Y-0.85759
+G1 X1.40735 Y-0.77370
+G1 X1.45813 Y-0.68614
+G1 X1.50345 Y-0.59526
+G1 X1.54309 Y-0.50138
+G1 X1.57685 Y-0.40487
+G1 X1.60457 Y-0.30609
+G1 X1.62608 Y-0.20542
+G1 X1.64125 Y-0.10326
+G1 X1.65000 Y-0.00000
+G1 X1.65223 Y0.10395
+G1 X1.64790 Y0.20818
+G1 X1.63698 Y0.31227
+G1 X1.61947 Y0.41581
+G1 X1.59540 Y0.51838
+G1 X1.56481 Y0.61955
+G1 X1.52780 Y0.71893
+G1 X1.48446 Y0.81609
+G1 X1.43494 Y0.91064
+G1 X1.37937 Y1.00217
+G1 X1.31796 Y1.09031
+G1 X1.25091 Y1.17468
+G1 X1.17845 Y1.25492
+G1 X1.10083 Y1.33068
+G1 X1.01834 Y1.40162
+G1 X0.93127 Y1.46744
+G1 X0.83994 Y1.52784
+G1 X0.74469 Y1.58254
+G1 X0.64587 Y1.63129
+G1 X0.54387 Y1.67386
+G1 X0.43906 Y1.71003
+G1 X0.33185 Y1.73963
+G1 X0.22265 Y1.76249
+G1 X0.11189 Y1.77848
+G1 X0.00000 Y1.78750
+G1 X-0.11258 Y1.78946
+G1 X-0.22541 Y1.78432
+G1 X-0.33804 Y1.77205
+G1 X-0.45000 Y1.75265
+G1 X-0.56087 Y1.72617
+G1 X-0.67017 Y1.69266
+G1 X-0.77747 Y1.65221
+G1 X-0.88233 Y1.60496
+G1 X-0.98431 Y1.55103
+G1 X-1.08299 Y1.49061
+G1 X-1.17796 Y1.42391
+G1 X-1.26881 Y1.35114
+G1 X-1.35515 Y1.27257
+G1 X-1.43662 Y1.18848
+G1 X-1.51286 Y1.09916
+G1 X-1.58354 Y1.00494
+G1 X-1.64833 Y0.90618
+G1 X-1.70696 Y0.80323
+G1 X-1.75914 Y0.69649
+G1 X-1.80463 Y0.58636
+G1 X-1.84321 Y0.47326
+G1 X-1.87470 Y0.35762
+G1 X-1.89891 Y0.23989
+G1 X-1.91571 Y0.12053
+G1 X-1.92500 Y0.00000
+G1 X-1.92669 Y-0.12122
+G1 X-1.92073 Y-0.24265
+G1 X-1.90711 Y-0.36380
+G1 X-1.88583 Y-0.48420
+G1 X-1.85694 Y-0.60336
+G1 X-1.82050 Y-0.72079
+G1 X-1.77663 Y-0.83602
+G1 X-1.72545 Y-0.94857
+G1 X-1.66713 Y-1.05799
+G1 X-1.60185 Y-1.16381
+G1 X-1.52985 Y-1.26561
+G1 X-1.45138 Y-1.36293
+G1 X-1.36670 Y-1.45539
+G1 X-1.27612 Y-1.54257
+G1 X-1.17998 Y-1.62410
+G1 X-1.07862 Y-1.69963
+G1 X-0.97242 Y-1.76883
+G1 X-0.86178 Y-1.83137
+G1 X-0.74711 Y-1.88698
+G1 X-0.62885 Y-1.93540
+G1 X-0.50745 Y-1.97639
+G1 X-0.38338 Y-2.00976
+G1 X-0.25712 Y-2.03532
+G1 X-0.12916 Y-2.05294
+G1 X-0.00000 Y-2.06250
+G1 X0.12985 Y-2.06392
+G1 X0.25988 Y-2.05715
+G1 X0.38957 Y-2.04218
+G1 X0.51839 Y-2.01901
+G1 X0.64585 Y-1.98771
+G1 X0.77141 Y-1.94835
+G1 X0.89456 Y-1.90104
+G1 X1.01481 Y-1.84594
+G1 X1.13167 Y-1.78322
+G1 X1.24464 Y-1.71309
+G1 X1.35325 Y-1.63580
+G1 X1.45706 Y-1.55161
+G1 X1.55562 Y-1.46082
+G1 X1.64851 Y-1.36377
+G1 X1.73534 Y-1.26080
+G1 X1.81573 Y-1.15230
+G1 X1.88932 Y-1.03866
+G1 X1.95578 Y-0.92032
+G1 X2.01483 Y-0.79773
+G1 X2.06617 Y-0.67134
+G1 X2.10957 Y-0.54165
+G1 X2.14482 Y-0.40915
+G1 X2.17174 Y-0.27435
+G1 X2.19017 Y-0.13779
+G1 X2.20000 Y-0.00000
+G1 X2.20115 Y0.13848
+G1 X2.19357 Y0.27711
+G1 X2.17724 Y0.41533
+G1 X2.15219 Y0.55259
+G1 X2.11848 Y0.68834
+G1 X2.07619 Y0.82202
+G1 X2.02546 Y0.95311
+G1 X1.96643 Y1.08106
+G1 X1.89932 Y1.20534
+G1 X1.82433 Y1.32546
+G1 X1.74175 Y1.44090
+G1 X1.65184 Y1.55118
+G1 X1.55495 Y1.65585
+G1 X1.45141 Y1.75446
+G1 X1.34162 Y1.84658
+G1 X1.22597 Y1.93182
+G1 X1.10490 Y2.00981
+G1 X0.97887 Y2.08020
+G1 X0.84834 Y2.14267
+G1 X0.71383 Y2.19694
+G1 X0.57584 Y2.24275
+G1 X0.43491 Y2.27989
+G1 X0.29159 Y2.30815
+G1 X0.14643 Y2.32740
+G1 X0.00000 Y2.33750
+G1 X-0.14712 Y2.33838
+G1 X-0.29435 Y2.32998
+G1 X-0.44110 Y2.31230
+G1 X-0.58678 Y2.28537
+G1 X-0.73083 Y2.24925
+G1 X-0.87264 Y2.20404
+G1 X-1.01165 Y2.14987
+G1 X-1.14730 Y2.08692
+G1 X-1.27902 Y2.01541
+G1 X-1.40628 Y1.93557
+G1 X-1.52854 Y1.84769
+G1 X-1.64531 Y1.75208
+G1 X-1.75609 Y1.64907
+G1 X-1.86040 Y1.53906
+G1 X-1.95782 Y1.42244
+G1 X-2.04792 Y1.29965
+G1 X-2.13030 Y1.17114
+G1 X-2.20461 Y1.03741
+G1 X-2.27051 Y0.89896
+G1 X-2.32771 Y0.75632
+G1 X-2.37593 Y0.61004
+G1 X-2.41495 Y0.46068
+G1 X-2.44457 Y0.30882
+G1 X-2.46463 Y0.15506
+G1 X-2.47500 Y0.00000
+G1 X-2.47561 Y-0.15575
+G1 X-2.46640 Y-0.31158
+G1 X-2.44737 Y-0.46686
+G1 X-2.41855 Y-0.62098
+G1 X-2.38002 Y-0.77332
+G1 X-2.33188 Y-0.92326
+G1 X-2.27428 Y-1.07020
+G1 X-2.20742 Y-1.21354
+G1 X-2.13151 Y-1.35269
+G1 X-2.04681 Y-1.48710
+G1 X-1.95364 Y-1.61619
+G1 X-1.85231 Y-1.73943
+G1 X-1.74320 Y-1.85632
+G1 X-1.62671 Y-1.96635
+G1 X-1.50326 Y-2.06906
+G1 X-1.37332 Y-2.16401
+G1 X-1.23738 Y-2.25079
+G1 X-1.09596 Y-2.32902
+G1 X-0.94958 Y-2.39836
+G1 X-0.79881 Y-2.45848
+G1 X-0.64423 Y-2.50911
+G1 X-0.48644 Y-2.55002
+G1 X-0.32605 Y-2.58099
+G1 X-0.16369 Y-2.60186
+G1 X-0.00000 Y-2.61250
+G1 X0.16439 Y-2.61283
+G1 X0.32881 Y-2.60281
+G1 X0.49263 Y-2.58243
+G1 X0.65517 Y-2.55173
+G1 X0.81580 Y-2.51079
+G1 X0.97387 Y-2.45972
+G1 X1.12874 Y-2.39870
+G1 X1.27978 Y-2.32791
+G1 X1.42637 Y-2.24760
+G1 X1.56792 Y-2.15805
+G1 X1.70383 Y-2.05958
+G1 X1.83356 Y-1.95254
+G1 X1.95655 Y-1.83732
+G1 X2.07230 Y-1.71435
+G1 X2.18030 Y-1.58408
+G1 X2.28011 Y-1.44700
+G1 X2.37129 Y-1.30363
+G1 X2.45344 Y-1.15450
+G1 X2.52620 Y-1.00019
+G1 X2.58925 Y-0.84130
+G1 X2.64229 Y-0.67843
+G1 X2.68508 Y-0.51221
+G1 X2.71740 Y-0.34329
+G1 X2.73908 Y-0.17233
+G1 X2.75000 Y-0.00000
+G1 X2.75006 Y0.17302
+G1 X2.73923 Y0.34605
+G1 X2.71750 Y0.51839
+G1 X2.68491 Y0.68937
+G1 X2.64156 Y0.85829
+G1 X2.58757 Y1.02449
+G1 X2.52311 Y1.18729
+G1 X2.44840 Y1.34602
+G1 X2.36370 Y1.50005
+G1 X2.26929 Y1.64874
+G1 X2.16553 Y1.79148
+G1 X2.05278 Y1.92768
+G1 X1.93145 Y2.05678
+G1 X1.80200 Y2.17824
+G1 X1.66490 Y2.29154
+G1 X1.52068 Y2.39620
+G1 X1.36987 Y2.49178
+G1 X1.21305 Y2.57785
+G1 X1.05081 Y2.65405
+G1 X0.88379 Y2.72002
+G1 X0.71262 Y2.77548
+G1 X0.53797 Y2.82015
+G1 X0.36052 Y2.85382
+G1 X0.18096 Y2.87631
+G1 X0.00000 Y2.88750
+G1 X-0.18165 Y2.88729
+G1 X-0.36328 Y2.87564
+G1 X-0.54416 Y2.85256
+G1 X-0.72356 Y2.81809
+G1 X-0.90078 Y2.77233
+G1 X-1.07511 Y2.71541
+G1 X-1.24583 Y2.64752
+G1 X-1.41226 Y2.56889
+G1 X-1.57372 Y2.47979
+G1 X-1.72956 Y2.38053
+G1 X-1.87913 Y2.27147
+G1 X-2.02181 Y2.15301
+G1 X-2.15702 Y2.02557
+G1 X-2.28419 Y1.88964
+G1 X-2.40278 Y1.74572
+G1 X-2.51230 Y1.59435
+G1 X-2.61227 Y1.43611
+G1 X-2.70227 Y1.27159
+G1 X-2.78189 Y1.10143
+G1 X-2.85079 Y0.92628
+G1 X-2.90866 Y0.74682
+G1 X-2.95521 Y0.56374
+G1 X-2.99023 Y0.37775
+G1 X-3.01354 Y0.18960
+G1 X-3.02500 Y0.00000
+G1 X-3.02452 Y-0.19029
+G1 X-3.01206 Y-0.38051
+G1 X-2.98763 Y-0.56992
+G1 X-2.95127 Y-0.75776
+G1 X-2.90310 Y-0.94327
+G1 X-2.84326 Y-1.12572
+G1 X-2.77194 Y-1.30437
+G1 X-2.68939 Y-1.47850
+G1 X-2.59589 Y-1.64740
+G1 X-2.49177 Y-1.81038
+G1 X-2.37742 Y-1.96677
+G1 X-2.25324 Y-2.11594
+G1 X-2.11970 Y-2.25725
+G1 X-1.97729 Y-2.39013
+G1 X-1.82654 Y-2.51402
+G1 X-1.66803 Y-2.62839
+G1 X-1.50235 Y-2.73276
+G1 X-1.33013 Y-2.82668
+G1 X-1.15205 Y-2.90974
+G1 X-0.96877 Y-2.98156
+G1 X-0.78101 Y-3.04184
+G1 X-0.58950 Y-3.09028
+G1 X-0.39499 Y-3.12665
+G1 X-0.19823 Y-3.15077
+G1 X0.00000 Y-3.16250
+G1 X0.19892 Y-3.16175
+G1 X0.39775 Y-3.14848
+G1 X0.59569 Y-3.12269
+G1 X0.79195 Y-3.08445
+G1 X0.98576 Y-3.03387
+G1 X1.17634 Y-2.97110
+G1 X1.36292 Y-2.89635
+G1 X1.54474 Y-2.80988
+G1 X1.72108 Y-2.71198
+G1 X1.89120 Y-2.60301
+G1 X2.05442 Y-2.48336
+G1 X2.21006 Y-2.35348
+G1 X2.35748 Y-2.21383
+G1 X2.49608 Y-2.06494
+G1 X2.62526 Y-1.90736
+G1 X2.74449 Y-1.74170
+G1 X2.85325 Y-1.56859
+G1 X2.95109 Y-1.38868
+G1 X3.03758 Y-1.20266
+G1 X3.11233 Y-1.01126
+G1 X3.17502 Y-0.81521
+G1 X3.22534 Y-0.61527
+G1 X3.26307 Y-0.41222
+G1 X3.28800 Y-0.20686
+G1 X3.30000 Y0.00000
+G1 X3.29898 Y0.20755
+G1 X3.28489 Y0.41498
+G1 X3.25776 Y0.62145
+G1 X3.21763 Y0.82615
+G1 X3.16464 Y1.02825
+G1 X3.09895 Y1.22696
+G1 X3.02077 Y1.42146
+G1 X2.93037 Y1.61098
+G1 X2.82808 Y1.79475
+G1 X2.71425 Y1.97202
+G1 X2.58931 Y2.14206
+G1 X2.45371 Y2.30419
+G1 X2.30795 Y2.45772
+G1 X2.15258 Y2.60202
+G1 X1.98818 Y2.73650
+G1 X1.81538 Y2.86058
+G1 X1.63483 Y2.97375
+G1 X1.44722 Y3.07551
+G1 X1.25328 Y3.16542
+G1 X1.05375 Y3.24310
+G1 X0.84940 Y3.30820
+G1 X0.64103 Y3.36040
+G1 X0.42945 Y3.39948
+G1 X0.21550 Y3.42523
+G1 X-0.00000 Y3.43750
+G1 X-0.21619 Y3.43621
+G1 X-0.43221 Y3.42131
+G1 X-0.64722 Y3.39282
+G1 X-0.86034 Y3.35081
+G1 X-1.07074 Y3.29541
+G1 X-1.27758 Y3.22679
+G1 X-1.48001 Y3.14518
+G1 X-1.67723 Y3.05086
+G1 X-1.86843 Y2.94417
+G1 X-2.05284 Y2.82549
+G1 X-2.22971 Y2.69526
+G1 X-2.39831 Y2.55394
+G1 X-2.55795 Y2.40208
+G1 X-2.70797 Y2.24023
+G1 X-2.84774 Y2.06900
+G1 X-2.97668 Y1.88906
+G1 X-3.09424 Y1.70107
+G1 X-3.19992 Y1.50577
+G1 X-3.29327 Y1.30390
+G1 X-3.37387 Y1.09624
+G1 X-3.44138 Y0.88360
+G1 X-3.49547 Y0.66680
+G1 X-3.53590 Y0.44669
+G1 X-3.56246 Y0.22413
+G1 X-3.57500 Y-0.00000
+G1 X-3.57343 Y-0.22482
+G1 X-3.55772 Y-0.44944
+G1 X-3.52788 Y-0.67298
+G1 X-3.48399 Y-0.89454
+G1 X-3.42618 Y-1.11323
+G1 X-3.35463 Y-1.32819
+G1 X-3.26959 Y-1.53855
+G1 X-3.17135 Y-1.74347
+G1 X-3.06027 Y-1.94210
+G1 X-2.93673 Y-2.13366
+G1 X-2.80120 Y-2.31735
+G1 X-2.65417 Y-2.49244
+G1 X-2.49620 Y-2.65818
+G1 X-2.32787 Y-2.81391
+G1 X-2.14982 Y-2.95898
+G1 X-1.96273 Y-3.09277
+G1 X-1.76731 Y-3.21473
+G1 X-1.56431 Y-3.32433
+G1 X-1.35451 Y-3.42111
+G1 X-1.13873 Y-3.50464
+G1 X-0.91779 Y-3.57456
+G1 X-0.69256 Y-3.63053
+G1 X-0.46392 Y-3.67231
+G1 X-0.23276 Y-3.69969
+G1 X0.00000 Y-3.71250
+G1 X0.23346 Y-3.71066
+G1 X0.46668 Y-3.69414
+G1 X0.69874 Y-3.66295
+G1 X0.92873 Y-3.61717
+G1 X1.15572 Y-3.55695
+G1 X1.37881 Y-3.48248
+G1 X1.59710 Y-3.39401
+G1 X1.80971 Y-3.29185
+G1 X2.01578 Y-3.17636
+G1 X2.21448 Y-3.04797
+G1 X2.40500 Y-2.90715
+G1 X2.58656 Y-2.75441
+G1 X2.75842 Y-2.59033
+G1 X2.91986 Y-2.41552
+G1 X3.07022 Y-2.23065
+G1 X3.20887 Y-2.03641
+G1 X3.33522 Y-1.83355
+G1 X3.44875 Y-1.62286
+G1 X3.54896 Y-1.40513
+G1 X3.63541 Y-1.18122
+G1 X3.70774 Y-0.95198
+G1 X3.76560 Y-0.71833
+G1 X3.80873 Y-0.48115
+G1 X3.83691 Y-0.24140
+G1 X3.85000 Y0.00000
+G1 X3.84789 Y0.24209
+G1 X3.83055 Y0.48391
+G1 X3.79801 Y0.72451
+G1 X3.75035 Y0.96293
+G1 X3.68772 Y1.19821
+G1 X3.61032 Y1.42943
+G1 X3.51842 Y1.65564
+G1 X3.41234 Y1.87595
+G1 X3.29246 Y2.08946
+G1 X3.15921 Y2.29530
+G1 X3.01309 Y2.49265
+G1 X2.85464 Y2.68069
+G1 X2.68445 Y2.85865
+G1 X2.50316 Y3.02581
+G1 X2.31147 Y3.18146
+G1 X2.11009 Y3.32496
+G1 X1.89980 Y3.45572
+G1 X1.68140 Y3.57316
+G1 X1.45575 Y3.67680
+G1 X1.22371 Y3.76618
+G1 X0.98618 Y3.84092
+G1 X0.74409 Y3.90066
+G1 X0.49839 Y3.94514
+G1 X0.25003 Y3.97414
+G1 X-0.00000 Y3.98750
+G1 X-0.25072 Y3.98512
+G1 X-0.50114 Y3.96697
+G1 X-0.75027 Y3.93308
+G1 X-0.99712 Y3.88353
+G1 X-1.24070 Y3.81849
+G1 X-1.48004 Y3.73817
+G1 X-1.71419 Y3.64283
+G1 X-1.94219 Y3.53283
+G1 X-2.16313 Y3.40855
+G1 X-2.37612 Y3.27045
+G1 X-2.58029 Y3.11904
+G1 X-2.77481 Y2.95487
+G1 X-2.95888 Y2.77858
+G1 X-3.13175 Y2.59081
+G1 X-3.29270 Y2.39229
+G1 X-3.44106 Y2.18376
+G1 X-3.57621 Y1.96604
+G1 X-3.69758 Y1.73995
+G1 X-3.80465 Y1.50637
+G1 X-3.89695 Y1.26620
+G1 X-3.97410 Y1.02037
+G1 X-4.03573 Y0.76986
+G1 X-4.08156 Y0.51562
+G1 X-4.11137 Y0.25867
+G1 X-4.12500 Y-0.00000
+G1 X-4.12235 Y-0.25936
+G1 X-4.10339 Y-0.51838
+G1 X-4.06814 Y-0.77604
+G1 X-4.01671 Y-1.03132
+G1 X-3.94926 Y-1.28319
+G1 X-3.86601 Y-1.53066
+G1 X-3.76725 Y-1.77273
+G1 X-3.65332 Y-2.00843
+G1 X-3.52465 Y-2.23681
+G1 X-3.38169 Y-2.45694
+G1 X-3.22498 Y-2.66794
+G1 X-3.05511 Y-2.86894
+G1 X-2.87270 Y-3.05912
+G1 X-2.67846 Y-3.23770
+G1 X-2.47311 Y-3.40394
+G1 X-2.25744 Y-3.55715
+G1 X-2.03228 Y-3.69670
+G1 X-1.79849 Y-3.82199
+G1 X-1.55698 Y-3.93249
+G1 X-1.30869 Y-4.02772
+G1 X-1.05457 Y-4.10728
+G1 X-0.79562 Y-4.17079
+G1 X-0.53285 Y-4.21798
+G1 X-0.26730 Y-4.24860
+G1 X0.00000 Y-4.26250
+G1 X0.26799 Y-4.25958
+G1 X0.53561 Y-4.23980
+G1 X0.80180 Y-4.20321
+G1 X1.06551 Y-4.14989
+G1 X1.32568 Y-4.08003
+G1 X1.58128 Y-3.99385
+G1 X1.83128 Y-3.89166
+G1 X2.07467 Y-3.77381
+G1 X2.31049 Y-3.64074
+G1 X2.53776 Y-3.49293
+G1 X2.75558 Y-3.33093
+G1 X2.96306 Y-3.15534
+G1 X3.15935 Y-2.96683
+G1 X3.34364 Y-2.76610
+G1 X3.51518 Y-2.55393
+G1 X3.67325 Y-2.33111
+G1 X3.81719 Y-2.09852
+G1 X3.94640 Y-1.85704
+G1 X4.06033 Y-1.60760
+G1 X4.15849 Y-1.35118
+G1 X4.24046 Y-1.08876
+G1 X4.30586 Y-0.82139
+G1 X4.35439 Y-0.55009
+G1 X4.38583 Y-0.27593
+G1 X4.40000 Y0.00000
+G1 X4.39681 Y0.27662
+G1 X4.37622 Y0.55284
+G1 X4.33827 Y0.82757
+G1 X4.28307 Y1.09971
+G1 X4.21080 Y1.36817
+G1 X4.12170 Y1.63190
+G1 X4.01607 Y1.88982
+G1 X3.89431 Y2.14091
+G1 X3.75684 Y2.38416
+G1 X3.60417 Y2.61858
+G1 X3.43687 Y2.84323
+G1 X3.25557 Y3.05719
+G1 X3.06095 Y3.25958
+G1 X2.85375 Y3.44959
+G1 X2.63475 Y3.62642
+G1 X2.40479 Y3.78934
+G1 X2.16476 Y3.93768
+G1 X1.91558 Y4.07082
+G1 X1.65822 Y4.18818
+G1 X1.39367 Y4.28926
+G1 X1.12296 Y4.37364
+G1 X0.84715 Y4.44092
+G1 X0.56732 Y4.49081
+G1 X0.28457 Y4.52306
+G1 X-0.00000 Y4.53750
+G1 X-0.28526 Y4.53404
+G1 X-0.57008 Y4.51263
+G1 X-0.85333 Y4.47334
+G1 X-1.13390 Y4.41625
+G1 X-1.41066 Y4.34157
+G1 X-1.68251 Y4.24954
+G1 X-1.94837 Y4.14049
+G1 X-2.20715 Y4.01480
+G1 X-2.45784 Y3.87293
+G1 X-2.69940 Y3.71541
+G1 X-2.93088 Y3.54282
+G1 X-3.15131 Y3.35581
+G1 X-3.35982 Y3.15508
+G1 X-3.55553 Y2.94139
+G1 X-3.73766 Y2.71557
+G1 X-3.90544 Y2.47847
+G1 X-4.05818 Y2.23100
+G1 X-4.19523 Y1.97413
+G1 X-4.31602 Y1.70883
+G1 X-4.42004 Y1.43616
+G1 X-4.50682 Y1.15715
+G1 X-4.57599 Y0.87292
+G1 X-4.62722 Y0.58455
+G1 X-4.66029 Y0.29320
+G1 X-4.67500 Y-0.00000
+G1 X-4.67126 Y-0.29389
+G1 X-4.64905 Y-0.58731
+G1 X-4.60840 Y-0.87910
+G1 X-4.54944 Y-1.16810
+G1 X-4.47234 Y-1.45315
+G1 X-4.37739 Y-1.73313
+G1 X-4.26490 Y-2.00691
+G1 X-4.13529 Y-2.27340
+G1 X-3.98903 Y-2.53151
+G1 X-3.82665 Y-2.78022
+G1 X-3.64877 Y-3.01852
+G1 X-3.45604 Y-3.24544
+G1 X-3.24920 Y-3.46005
+G1 X-3.02904 Y-3.66148
+G1 X-2.79639 Y-3.84890
+G1 X-2.55214 Y-4.02153
+G1 X-2.29724 Y-4.17867
+G1 X-2.03267 Y-4.31964
+G1 X-1.75945 Y-4.44387
+G1 X-1.47865 Y-4.55081
+G1 X-1.19135 Y-4.64000
+G1 X-0.89868 Y-4.71105
+G1 X-0.60179 Y-4.76364
+G1 X-0.30183 Y-4.79751
+G1 X0.00000 Y-4.81250
+G1 X0.30252 Y-4.80849
+G1 X0.60454 Y-4.78547
+G1 X0.90486 Y-4.74347
+G1 X1.20229 Y-4.68262
+G1 X1.49564 Y-4.60311
+G1 X1.78375 Y-4.50523
+G1 X2.06546 Y-4.38932
+G1 X2.33964 Y-4.25578
+G1 X2.60519 Y-4.10512
+G1 X2.86104 Y-3.93789
+G1 X3.10617 Y-3.75471
+G1 X3.33956 Y-3.55627
+G1 X3.56028 Y-3.34333
+G1 X3.76742 Y-3.11668
+G1 X3.96014 Y-2.87721
+G1 X4.13763 Y-2.62582
+G1 X4.29916 Y-2.36348
+G1 X4.44406 Y-2.09121
+G1 X4.57171 Y-1.81007
+G1 X4.68158 Y-1.52114
+G1 X4.77318 Y-1.22554
+G1 X4.84611 Y-0.92445
+G1 X4.90005 Y-0.61902
+G1 X4.93474 Y-0.31047
+G1 X4.95000 Y0.00000
+G1 X4.94572 Y0.31116
+G1 X4.92188 Y0.62178
+G1 X4.87853 Y0.93063
+G1 X4.81580 Y1.23649
+G1 X4.73388 Y1.53813
+G1 X4.63308 Y1.83436
+G1 X4.51373 Y2.12400
+G1 X4.37628 Y2.40588
+G1 X4.22122 Y2.67887
+G1 X4.04913 Y2.94187
+G1 X3.86066 Y3.19381
+G1 X3.65651 Y3.43369
+G1 X3.43745 Y3.66052
+G1 X3.20433 Y3.87337
+G1 X2.95803 Y4.07138
+G1 X2.69950 Y4.25372
+G1 X2.42972 Y4.41965
+G1 X2.14976 Y4.56847
+G1 X1.86069 Y4.69956
+G1 X1.56363 Y4.81235
+G1 X1.25974 Y4.90636
+G1 X0.95021 Y4.98118
+G1 X0.63625 Y5.03647
+G1 X0.31910 Y5.07197
+G1 X-0.00000 Y5.08750
+G1 X-0.31979 Y5.08295
+G1 X-0.63901 Y5.05830
+G1 X-0.95639 Y5.01359
+G1 X-1.27068 Y4.94898
+G1 X-1.58062 Y4.86465
+G1 X-1.88498 Y4.76092
+G1 X-2.18254 Y4.63814
+G1 X-2.47212 Y4.49677
+G1 X-2.75254 Y4.33731
+G1 X-3.02269 Y4.16037
+G1 X-3.28146 Y3.96660
+G1 X-3.52781 Y3.75674
+G1 X-3.76075 Y3.53158
+G1 X-3.97932 Y3.29198
+G1 X-4.18262 Y3.03885
+G1 X-4.36982 Y2.77317
+G1 X-4.54014 Y2.49597
+G1 X-4.69289 Y2.20830
+G1 X-4.82740 Y1.91130
+G1 X-4.94312 Y1.60612
+G1 X-5.03954 Y1.29393
+G1 X-5.11624 Y0.97598
+G1 X-5.17289 Y0.65349
+G1 X-5.20920 Y0.32774
+G1 X-5.22500 Y-0.00000
+G1 X-5.22018 Y-0.32843
+G1 X-5.19471 Y-0.65624
+G1 X-5.14866 Y-0.98216
+G1 X-5.08216 Y-1.30488
+G1 X-4.99542 Y-1.62311
+G1 X-4.88876 Y-1.93560
+G1 X-4.76256 Y-2.24109
+G1 X-4.61726 Y-2.53836
+G1 X-4.45341 Y-2.82622
+G1 X-4.27161 Y-3.10351
+G1 X-4.07255 Y-3.36910
+G1 X-3.85697 Y-3.62194
+G1 X-3.62570 Y-3.86098
+G1 X-3.37962 Y-4.08526
+G1 X-3.11967 Y-4.29386
+G1 X-2.84685 Y-4.48591
+G1 X-2.56221 Y-4.66064
+G1 X-2.26685 Y-4.81730
+G1 X-1.96192 Y-4.95524
+G1 X-1.64861 Y-5.07389
+G1 X-1.32813 Y-5.17272
+G1 X-1.00174 Y-5.25131
+G1 X-0.67072 Y-5.30930
+G1 X-0.33637 Y-5.34643
+G1 X0.00000 Y-5.36250
+G1 X0.33706 Y-5.35741
+G1 X0.67348 Y-5.33113
+G1 X1.00792 Y-5.28372
+G1 X1.33907 Y-5.21534
+G1 X1.66560 Y-5.12619
+G1 X1.98622 Y-5.01661
+G1 X2.29963 Y-4.88697
+G1 X2.60460 Y-4.73775
+G1 X2.89989 Y-4.56950
+G1 X3.18433 Y-4.38285
+G1 X3.45675 Y-4.17849
+G1 X3.71606 Y-3.95721
+G1 X3.96122 Y-3.71983
+G1 X4.19121 Y-3.46727
+G1 X4.40510 Y-3.20049
+G1 X4.60201 Y-2.92052
+G1 X4.78113 Y-2.62845
+G1 X4.94171 Y-2.32539
+G1 X5.08309 Y-2.01254
+G1 X5.20466 Y-1.69110
+G1 X5.30590 Y-1.36232
+G1 X5.38637 Y-1.02751
+G1 X5.44572 Y-0.68795
+G1 X5.48366 Y-0.34500
+G1 X5.50000 Y0.00000
+G1 X5.49464 Y0.34569
+G1 X5.46754 Y0.69071
+G1 X5.41879 Y1.03369
+G1 X5.34852 Y1.37327
+G1 X5.25696 Y1.70809
+G1 X5.14445 Y2.03683
+G1 X5.01138 Y2.35818
+G1 X4.85824 Y2.67084
+G1 X4.68560 Y2.97357
+G1 X4.49409 Y3.26515
+G1 X4.28444 Y3.54440
+G1 X4.05744 Y3.81019
+G1 X3.81395 Y4.06145
+G1 X3.55491 Y4.29715
+G1 X3.28131 Y4.51634
+G1 X2.99420 Y4.71810
+G1 X2.69469 Y4.90162
+G1 X2.38394 Y5.06613
+G1 X2.06315 Y5.21093
+G1 X1.73359 Y5.33543
+G1 X1.39652 Y5.43908
+G1 X1.05327 Y5.52144
+G1 X0.70519 Y5.58213
+G1 X0.35364 Y5.62089
+G1 X-0.00000 Y5.63750
+G1 X-0.35433 Y5.63186
+G1 X-0.70794 Y5.60396
+G1 X-1.05945 Y5.55385
+G1 X-1.40746 Y5.48170
+G1 X-1.75058 Y5.38774
+G1 X-2.08745 Y5.27230
+G1 X-2.41672 Y5.13580
+G1 X-2.73708 Y4.97874
+G1 X-3.04725 Y4.80169
+G1 X-3.34597 Y4.60533
+G1 X-3.63204 Y4.39038
+G1 X-3.90431 Y4.15767
+G1 X-4.16168 Y3.90808
+G1 X-4.40310 Y3.64256
+G1 X-4.62758 Y3.36213
+G1 X-4.83420 Y3.06788
+G1 X-5.02211 Y2.76093
+G1 X-5.19054 Y2.44248
+G1 X-5.33878 Y2.11377
+G1 X-5.46620 Y1.77608
+G1 X-5.57226 Y1.43071
+G1 X-5.65650 Y1.07904
+G1 X-5.71855 Y0.72242
+G1 X-5.75812 Y0.36227
+G1 X-5.77500 Y-0.00000
+G1 X-5.76909 Y-0.36296
+G1 X-5.74038 Y-0.72518
+G1 X-5.68892 Y-1.08522
+G1 X-5.61488 Y-1.44166
+G1 X-5.51851 Y-1.79307
+G1 X-5.40014 Y-2.13807
+G1 X-5.26021 Y-2.47527
+G1 X-5.09923 Y-2.80332
+G1 X-4.91779 Y-3.12092
+G1 X-4.71657 Y-3.42679
+G1 X-4.49633 Y-3.71969
+G1 X-4.25791 Y-3.99844
+G1 X-4.00220 Y-4.26192
+G1 X-3.73021 Y-4.50904
+G1 X-3.44295 Y-4.73882
+G1 X-3.14155 Y-4.95029
+G1 X-2.82717 Y-5.14261
+G1 X-2.50103 Y-5.31495
+G1 X-2.16439 Y-5.46662
+G1 X-1.81857 Y-5.59697
+G1 X-1.46491 Y-5.70544
+G1 X-1.10480 Y-5.79157
+G1 X-0.73965 Y-5.85496
+G1 X-0.37090 Y-5.89534
+G1 X0.00000 Y-5.91250
+G1 X0.37159 Y-5.90632
+G1 X0.74241 Y-5.87679
+G1 X1.11098 Y-5.82398
+G1 X1.47585 Y-5.74806
+G1 X1.83556 Y-5.64928
+G1 X2.18868 Y-5.52799
+G1 X2.53381 Y-5.38463
+G1 X2.86957 Y-5.21972
+G1 X3.19460 Y-5.03388
+G1 X3.50761 Y-4.82781
+G1 X3.80733 Y-4.60228
+G1 X4.09256 Y-4.35814
+G1 X4.36215 Y-4.09633
+G1 X4.61499 Y-3.81785
+G1 X4.85006 Y-3.52377
+G1 X5.06639 Y-3.21523
+G1 X5.26310 Y-2.89341
+G1 X5.43937 Y-2.55957
+G1 X5.59447 Y-2.21501
+G1 X5.72774 Y-1.86105
+G1 X5.83862 Y-1.49910
+G1 X5.92663 Y-1.13057
+G1 X5.99138 Y-0.75689
+G1 X6.03257 Y-0.37954
+G1 X6.05000 Y0.00000
+G1 X6.04355 Y0.38023
+G1 X6.01321 Y0.75964
+G1 X5.95905 Y1.13675
+G1 X5.88124 Y1.51004
+G1 X5.78005 Y1.87805
+G1 X5.65583 Y2.23930
+G1 X5.50904 Y2.59236
+G1 X5.34021 Y2.93581
+G1 X5.14998 Y3.26828
+G1 X4.93905 Y3.58843
+G1 X4.70822 Y3.89498
+G1 X4.45837 Y4.18669
+G1 X4.19046 Y4.46238
+G1 X3.90550 Y4.72093
+G1 X3.60459 Y4.96130
+G1 X3.28890 Y5.18248
+G1 X2.95965 Y5.38359
+G1 X2.61812 Y5.56378
+G1 X2.26562 Y5.72231
+G1 X1.90354 Y5.85851
+G1 X1.53330 Y5.97180
+G1 X1.15633 Y6.06169
+G1 X0.77412 Y6.12780
+G1 X0.38817 Y6.16980
+G1 X-0.00000 Y6.18750
+G1 X-0.38886 Y6.18078
+G1 X-0.77688 Y6.14962
+G1 X-1.16251 Y6.09411
+G1 X-1.54424 Y6.01442
+G1 X-1.92054 Y5.91082
+G1 X-2.28992 Y5.78367
+G1 X-2.65090 Y5.63345
+G1 X-3.00205 Y5.46071
+G1 X-3.34195 Y5.26607
+G1 X-3.66925 Y5.05029
+G1 X-3.98263 Y4.81417
+G1 X-4.28082 Y4.55861
+G1 X-4.56261 Y4.28458
+G1 X-4.82688 Y3.99314
+G1 X-5.07254 Y3.68541
+G1 X-5.29858 Y3.36258
+G1 X-5.50408 Y3.02589
+G1 X-5.68820 Y2.67666
+G1 X-5.85015 Y2.31624
+G1 X-5.98928 Y1.94603
+G1 X-6.10498 Y1.56749
+G1 X-6.19676 Y1.18210
+G1 X-6.26421 Y0.79135
+G1 X-6.30703 Y0.39680
+G1 X-6.32500 Y-0.00000
+G1 X-6.31801 Y-0.39750
+G1 X-6.28604 Y-0.79411
+G1 X-6.22917 Y-1.18828
+G1 X-6.14760 Y-1.57843
+G1 X-6.04159 Y-1.96303
+G1 X-5.91152 Y-2.34054
+G1 X-5.75787 Y-2.70945
+G1 X-5.58120 Y-3.06829
+G1 X-5.38217 Y-3.41563
+G1 X-5.16153 Y-3.75007
+G1 X-4.92011 Y-4.07027
+G1 X-4.65884 Y-4.37494
+G1 X-4.37871 Y-4.66285
+G1 X-4.08079 Y-4.93283
+G1 X-3.76623 Y-5.18378
+G1 X-3.43626 Y-5.41467
+G1 X-3.09214 Y-5.62457
+G1 X-2.73521 Y-5.81261
+G1 X-2.36686 Y-5.97800
+G1 X-1.98852 Y-6.12005
+G1 X-1.60169 Y-6.23816
+G1 X-1.20786 Y-6.33182
+G1 X-0.80859 Y-6.40063
+G1 X-0.40544 Y-6.44426
+G1 X0.00000 Y-6.46250
+G1 X0.40613 Y-6.45524
+G1 X0.81134 Y-6.42245
+G1 X1.21404 Y-6.36424
+G1 X1.61263 Y-6.28078
+G1 X2.00552 Y-6.17236
+G1 X2.39115 Y-6.03936
+G1 X2.76799 Y-5.88228
+G1 X3.13453 Y-5.70169
+G1 X3.48930 Y-5.49826
+G1 X3.83089 Y-5.27277
+G1 X4.15792 Y-5.02606
+G1 X4.46907 Y-4.75907
+G1 X4.76308 Y-4.47283
+G1 X5.03877 Y-4.16843
+G1 X5.29502 Y-3.84705
+G1 X5.53077 Y-3.50993
+G1 X5.74507 Y-3.15838
+G1 X5.93702 Y-2.79375
+G1 X6.10584 Y-2.41747
+G1 X6.25082 Y-2.03101
+G1 X6.37134 Y-1.63588
+G1 X6.46689 Y-1.23362
+G1 X6.53704 Y-0.82582
+G1 X6.58149 Y-0.41407
+G1 X6.60000 Y0.00000
+G1 X6.59247 Y0.41476
+G1 X6.55887 Y0.82858
+G1 X6.49930 Y1.23981
+G1 X6.41396 Y1.64682
+G1 X6.30313 Y2.04801
+G1 X6.16721 Y2.44177
+G1 X6.00669 Y2.82654
+G1 X5.82218 Y3.20077
+G1 X5.61436 Y3.56298
+G1 X5.38401 Y3.91171
+G1 X5.13200 Y4.24556
+G1 X4.85930 Y4.56319
+G1 X4.56696 Y4.86331
+G1 X4.25608 Y5.14472
+G1 X3.92787 Y5.40626
+G1 X3.58361 Y5.64687
+G1 X3.22462 Y5.86556
+G1 X2.85230 Y6.06144
+G1 X2.46809 Y6.23369
+G1 X2.07350 Y6.38159
+G1 X1.67008 Y6.50452
+G1 X1.25939 Y6.60195
+G1 X0.84305 Y6.67346
+G1 X0.42271 Y6.71872
+G1 X-0.00000 Y6.73750
+G1 X-0.42340 Y6.72969
+G1 X-0.84581 Y6.69529
+G1 X-1.26557 Y6.63437
+G1 X-1.68102 Y6.54714
+G1 X-2.09050 Y6.43390
+G1 X-2.49239 Y6.29505
+G1 X-2.88508 Y6.13111
+G1 X-3.26701 Y5.94267
+G1 X-3.63666 Y5.73045
+G1 X-3.99253 Y5.49525
+G1 X-4.33321 Y5.23795
+G1 X-4.65732 Y4.95954
+G1 X-4.96355 Y4.66108
+G1 X-5.25066 Y4.34373
+G1 X-5.51750 Y4.00870
+G1 X-5.76296 Y3.65729
+G1 X-5.98605 Y3.29086
+G1 X-6.18585 Y2.91084
+G1 X-6.36153 Y2.51871
+G1 X-6.51236 Y2.11599
+G1 X-6.63770 Y1.70427
+G1 X-6.73702 Y1.28515
+G1 X-6.80988 Y0.86029
+G1 X-6.85594 Y0.43134
+G1 X-6.87500 Y-0.00000
+G1 X-6.86692 Y-0.43203
+G1 X-6.83170 Y-0.86304
+G1 X-6.76943 Y-1.29134
+G1 X-6.68032 Y-1.71521
+G1 X-6.56467 Y-2.13299
+G1 X-6.42290 Y-2.54300
+G1 X-6.25552 Y-2.94363
+G1 X-6.06317 Y-3.33325
+G1 X-5.84655 Y-3.71033
+G1 X-5.60649 Y-4.07335
+G1 X-5.34389 Y-4.42085
+G1 X-5.05977 Y-4.75144
+G1 X-4.75521 Y-5.06378
+G1 X-4.43137 Y-5.35661
+G1 X-4.08952 Y-5.62874
+G1 X-3.73096 Y-5.87906
+G1 X-3.35710 Y-6.10654
+G1 X-2.96938 Y-6.31026
+G1 X-2.56933 Y-6.48937
+G1 X-2.15848 Y-6.64313
+G1 X-1.73847 Y-6.77088
+G1 X-1.31092 Y-6.87208
+G1 X-0.87752 Y-6.94629
+G1 X-0.43997 Y-6.99317
+G1 X0.00000 Y-7.01250
+G1 X0.44066 Y-7.00415
+G1 X0.88028 Y-6.96812
+G1 X1.31710 Y-6.90450
+G1 X1.74941 Y-6.81350
+G1 X2.17548 Y-6.69544
+G1 X2.59362 Y-6.55074
+G1 X3.00217 Y-6.37994
+G1 X3.39949 Y-6.18366
+G1 X3.78401 Y-5.96264
+G1 X4.15417 Y-5.71773
+G1 X4.50850 Y-5.44984
+G1 X4.84557 Y-5.16000
+G1 X5.16401 Y-4.84933
+G1 X5.46255 Y-4.51902
+G1 X5.73998 Y-4.17034
+G1 X5.99515 Y-3.80464
+G1 X6.22704 Y-3.42334
+G1 X6.43468 Y-3.02793
+G1 X6.61722 Y-2.61994
+G1 X6.77390 Y-2.20097
+G1 X6.90406 Y-1.77266
+G1 X7.00715 Y-1.33668
+G1 X7.08271 Y-0.89475
+G1 X7.13040 Y-0.44861
+G1 X7.15000 Y0.00000
+G1 X7.14138 Y0.44930
+G1 X7.10453 Y0.89751
+G1 X7.03956 Y1.34287
+G1 X6.94668 Y1.78360
+G1 X6.82621 Y2.21797
+G1 X6.67858 Y2.64424
+G1 X6.50435 Y3.06071
+G1 X6.30415 Y3.46574
+G1 X6.07874 Y3.85769
+G1 X5.82897 Y4.23499
+G1 X5.55579 Y4.59615
+G1 X5.26024 Y4.93969
+G1 X4.94346 Y5.26425
+G1 X4.60666 Y5.56850
+G1 X4.25116 Y5.85122
+G1 X3.87831 Y6.11125
+G1 X3.48958 Y6.34753
+G1 X3.08647 Y6.55909
+G1 X2.67056 Y6.74506
+G1 X2.24346 Y6.90467
+G1 X1.80686 Y7.03724
+G1 X1.36245 Y7.14221
+G1 X0.91199 Y7.21912
+G1 X0.45724 Y7.26763
+G1 X-0.00000 Y7.28750
+G1 X-0.45793 Y7.27861
+G1 X-0.91474 Y7.24095
+G1 X-1.36863 Y7.17463
+G1 X-1.81780 Y7.07986
+G1 X-2.26046 Y6.95698
+G1 X-2.69486 Y6.80643
+G1 X-3.11926 Y6.62876
+G1 X-3.53198 Y6.42464
+G1 X-3.93136 Y6.19483
+G1 X-4.31581 Y5.94021
+G1 X-4.68379 Y5.66173
+G1 X-5.03382 Y5.36047
+G1 X-5.36448 Y5.03758
+G1 X-5.67444 Y4.69431
+G1 X-5.96246 Y4.33198
+G1 X-6.22734 Y3.95199
+G1 X-6.46802 Y3.55582
+G1 X-6.68351 Y3.14502
+G1 X-6.87291 Y2.72118
+G1 X-7.03544 Y2.28595
+G1 X-7.17042 Y1.84105
+G1 X-7.27728 Y1.38821
+G1 X-7.35554 Y0.92922 F1500.00000
+G1 X-7.40486 Y0.46587
+G1 X-7.42500 Y-0.00000
+G1 X-7.41584 Y-0.46656
+G1 X-7.37736 Y-0.93198
+G1 X-7.30969 Y-1.39440
+G1 X-7.21304 Y-1.85199
+G1 X-7.08775 Y-2.30295
+G1 X-6.93427 Y-2.74547
+G1 X-6.75318 Y-3.17780
+G1 X-6.54513 Y-3.59822
+G1 X-6.31093 Y-4.00504
+G1 X-6.05145 Y-4.39663
+G1 X-5.76768 Y-4.77144
+G1 X-5.46070 Y-5.12794
+G1 X-5.13171 Y-5.46471
+G1 X-4.78195 Y-5.78039
+G1 X-4.41280 Y-6.07370
+G1 X-4.02567 Y-6.34344
+G1 X-3.62206 Y-6.58851
+G1 X-3.20356 Y-6.80792
+G1 X-2.77179 Y-7.00075
+G1 X-2.32844 Y-7.16621
+G1 X-1.87525 Y-7.30360
+G1 X-1.41398 Y-7.41234
+G1 X-0.94645 Y-7.49195
+G1 X-0.47451 Y-7.54209
+G1 X0.00000 Y-7.56250
+G1 X0.47520 Y-7.55307
+G1 X0.94921 Y-7.51378
+G1 X1.42016 Y-7.44476
+G1 X1.88619 Y-7.34622
+G1 X2.34544 Y-7.21852
+G1 X2.79609 Y-7.06212
+G1 X3.23635 Y-6.87759
+G1 X3.66446 Y-6.66563
+G1 X4.07871 Y-6.42702
+G1 X4.47745 Y-6.16269
+G1 X4.85908 Y-5.87362
+G1 X5.22207 Y-5.56094
+G1 X5.56495 Y-5.22583
+G1 X5.88634 Y-4.86960
+G1 X6.18493 Y-4.49362
+G1 X6.45953 Y-4.09934
+G1 X6.70900 Y-3.68831
+G1 X6.93233 Y-3.26211
+G1 X7.12860 Y-2.82241
+G1 X7.29698 Y-2.37093
+G1 X7.43678 Y-1.90944
+G1 X7.54740 Y-1.43974
+G1 X7.62837 Y-0.96369
+G1 X7.67932 Y-0.48314
+G1 X7.70000 Y0.00000
+G1 X7.69029 Y0.48383
+G1 X7.65020 Y0.96644
+G1 X7.57982 Y1.44593
+G1 X7.47940 Y1.92038
+G1 X7.34929 Y2.38793
+G1 X7.18996 Y2.84671
+G1 X7.00200 Y3.29489
+G1 X6.78612 Y3.73070
+G1 X6.54312 Y4.15239
+G1 X6.27393 Y4.55827
+G1 X5.97957 Y4.94673
+G1 X5.66117 Y5.31619
+G1 X5.31996 Y5.66518
+G1 X4.95725 Y5.99228
+G1 X4.57444 Y6.29617
+G1 X4.17302 Y6.57563
+G1 X3.75455 Y6.82950
+G1 X3.32065 Y7.05675
+G1 X2.87303 Y7.25644
+G1 X2.41342 Y7.42775
+G1 X1.94364 Y7.56996
+G1 X1.46551 Y7.68247
+G1 X0.98092 Y7.76479
+G1 X0.49178 Y7.81655
+G1 X-0.00000 Y7.83750
+G1 X-0.49247 Y7.82752
+G1 X-0.98368 Y7.78661
+G1 X-1.47169 Y7.71488
+G1 X-1.95458 Y7.61258
+G1 X-2.43042 Y7.48006
+G1 X-2.89732 Y7.31781
+G1 X-3.35344 Y7.12642
+G1 X-3.79694 Y6.90661
+G1 X-4.22607 Y6.65921
+G1 X-4.63910 Y6.38517
+G1 X-5.03437 Y6.08551
+G1 X-5.41032 Y5.76140
+G1 X-5.76541 Y5.41408
+G1 X-6.09823 Y5.04489
+G1 X-6.40741 Y4.65526
+G1 X-6.69172 Y4.24670
+G1 X-6.94999 Y3.82079
+G1 X-7.18116 Y3.37920
+G1 X-7.38428 Y2.92365
+G1 X-7.55852 Y2.45591
+G1 X-7.70314 Y1.97783
+G1 X-7.81753 Y1.49127
+G1 X-7.90120 Y0.99815
+G1 X-7.95377 Y0.50041
+G1 X-7.97500 Y-0.00000
+G1 X-7.96475 Y-0.50110
+G1 X-7.92303 Y-1.00091
+G1 X-7.84995 Y-1.49746
+G1 X-7.74576 Y-1.98877
+G1 X-7.61083 Y-2.47291
+G1 X-7.44565 Y-2.94794
+G1 X-7.25083 Y-3.41198
+G1 X-7.02710 Y-3.86318
+G1 X-6.77531 Y-4.29974
+G1 X-6.49641 Y-4.71992
+G1 X-6.19146 Y-5.12202
+G1 X-5.86164 Y-5.50444
+G1 X-5.50821 Y-5.86565
+G1 X-5.13254 Y-6.20417
+G1 X-4.73608 Y-6.51865
+G1 X-4.32037 Y-6.80782
+G1 X-3.88703 Y-7.07048
+G1 X-3.43774 Y-7.30557
+G1 X-2.97426 Y-7.51213
+G1 X-2.49840 Y-7.68929
+G1 X-2.01203 Y-7.83632
+G1 X-1.51704 Y-7.95260
+G1 X-1.01539 Y-8.03762
+G1 X-0.50904 Y-8.09100
+G1 X0.00000 Y-8.11250
+G1 X0.50973 Y-8.10198
+G1 X1.01814 Y-8.05944
+G1 X1.52322 Y-7.98501
+G1 X2.02297 Y-7.87894
+G1 X2.51540 Y-7.74160
+G1 X2.99856 Y-7.57349
+G1 X3.47053 Y-7.37525
+G1 X3.92942 Y-7.14760
+G1 X4.37342 Y-6.89140
+G1 X4.80074 Y-6.60765
+G1 X5.20967 Y-6.29740
+G1 X5.59857 Y-5.96187
+G1 X5.96588 Y-5.60233
+G1 X6.31012 Y-5.22018
+G1 X6.62989 Y-4.81690
+G1 X6.92391 Y-4.39405
+G1 X7.19097 Y-3.95327
+G1 X7.42999 Y-3.49629
+G1 X7.63997 Y-3.02488
+G1 X7.82006 Y-2.54089
+G1 X7.96950 Y-2.04622
+G1 X8.08766 Y-1.54280
+G1 X8.17403 Y-1.03262
+G1 X8.22823 Y-0.51768
+G1 X8.25000 Y0.00000
+G1 X8.23921 Y0.51837
+G1 X8.19586 Y1.03538
+G1 X8.12008 Y1.54899
+G1 X8.01212 Y2.05716
+G1 X7.87237 Y2.55789
+G1 X7.70134 Y3.04918
+G1 X7.49966 Y3.52907
+G1 X7.26809 Y3.99566
+G1 X7.00750 Y4.44709
+G1 X6.71889 Y4.88156
+G1 X6.40335 Y5.29731
+G1 X6.06210 Y5.69269
+G1 X5.69646 Y6.06611
+G1 X5.30783 Y6.41606
+G1 X4.89772 Y6.74113
+G1 X4.46772 Y7.04001
+G1 X4.01951 Y7.31146
+G1 X3.55483 Y7.55440
+G1 X3.07550 Y7.76782
+G1 X2.58338 Y7.95083
+G1 X2.08042 Y8.10268
+G1 X1.56857 Y8.22273
+G1 X1.04985 Y8.31045
+G1 X0.52631 Y8.36546
+G1 X-0.00000 Y8.38750
+G1 X-0.52700 Y8.37644
+G1 X-1.05261 Y8.33228
+G1 X-1.57475 Y8.25514
+G1 X-2.09136 Y8.14530
+
+(Outer Circle)
+
+G1 X-2.59961 Y8.00076
+G1 X-3.09685 Y7.82174
+G1 X-3.58187 Y7.61186
+G1 X-4.05275 Y7.37193
+G1 X-4.50764 Y7.10291
+G1 X-4.94474 Y6.80586
+G1 X-5.36233 Y6.48194
+G1 X-5.75875 Y6.13245
+G1 X-6.13245 Y5.75875
+G1 X-6.48194 Y5.36233
+G1 X-6.80586 Y4.94474
+G1 X-7.10291 Y4.50764
+G1 X-7.37193 Y4.05275
+G1 X-7.61186 Y3.58187
+G1 X-7.82174 Y3.09685
+G1 X-8.00076 Y2.59961
+G1 X-8.14821 Y2.09210
+G1 X-8.26349 Y1.57635
+G1 X-8.34616 Y1.05437
+G1 X-8.39590 Y0.52823
+G1 X-8.41250 Y-0.00000
+G1 X-8.39590 Y-0.52823
+G1 X-8.34616 Y-1.05437
+G1 X-8.26349 Y-1.57635
+G1 X-8.14821 Y-2.09210
+G1 X-8.00076 Y-2.59961
+G1 X-7.82174 Y-3.09685
+G1 X-7.61186 Y-3.58187
+G1 X-7.37193 Y-4.05275
+G1 X-7.10291 Y-4.50764
+G1 X-6.80586 Y-4.94474
+G1 X-6.48194 Y-5.36233
+G1 X-6.13245 Y-5.75875
+G1 X-5.75875 Y-6.13245
+G1 X-5.36233 Y-6.48194
+G1 X-4.94474 Y-6.80586
+G1 X-4.50764 Y-7.10291
+G1 X-4.05275 Y-7.37193
+G1 X-3.58187 Y-7.61186
+G1 X-3.09685 Y-7.82174
+G1 X-2.59961 Y-8.00076
+G1 X-2.09210 Y-8.14821
+G1 X-1.57635 Y-8.26349
+G1 X-1.05437 Y-8.34616
+G1 X-0.52823 Y-8.39590
+G1 X0.00000 Y-8.41250
+G1 X0.52823 Y-8.39590
+G1 X1.05437 Y-8.34616
+G1 X1.57635 Y-8.26349
+G1 X2.09210 Y-8.14821
+G1 X2.59961 Y-8.00076
+G1 X3.09685 Y-7.82174
+G1 X3.58187 Y-7.61186
+G1 X4.05275 Y-7.37193
+G1 X4.50764 Y-7.10291
+G1 X4.94474 Y-6.80586
+G1 X5.36233 Y-6.48194
+G1 X5.75875 Y-6.13245
+G1 X6.13245 Y-5.75875
+G1 X6.48194 Y-5.36233
+G1 X6.80586 Y-4.94474
+G1 X7.10291 Y-4.50764
+G1 X7.37193 Y-4.05275
+G1 X7.61186 Y-3.58187
+G1 X7.82174 Y-3.09685
+G1 X8.00076 Y-2.59961
+G1 X8.14821 Y-2.09210
+G1 X8.26349 Y-1.57635
+G1 X8.34616 Y-1.05437
+G1 X8.39590 Y-0.52823
+G1 X8.41250 Y0.00000
+G1 X8.39590 Y0.52823
+G1 X8.34616 Y1.05437
+G1 X8.26349 Y1.57635
+G1 X8.14821 Y2.09210
+G1 X8.00076 Y2.59961
+G1 X7.82174 Y3.09685
+G1 X7.61186 Y3.58187
+G1 X7.37193 Y4.05275
+G1 X7.10291 Y4.50764
+G1 X6.80586 Y4.94474
+G1 X6.48194 Y5.36233
+G1 X6.13245 Y5.75875
+G1 X5.75875 Y6.13245
+G1 X5.36233 Y6.48194
+G1 X4.94474 Y6.80586
+G1 X4.50764 Y7.10291
+G1 X4.05275 Y7.37193
+G1 X3.58187 Y7.61186
+G1 X3.09685 Y7.82174
+G1 X2.59961 Y8.00076
+G1 X2.09210 Y8.14821
+G1 X1.57635 Y8.26349
+G1 X1.05437 Y8.34616
+G1 X0.52823 Y8.39590
+G1 X-0.00000 Y8.41250
+G1 X-0.52823 Y8.39590
+G1 X-1.05437 Y8.34616
+G1 X-1.57635 Y8.26349
+G1 X-2.09210 Y8.14821
+G1 X-2.59961 Y8.00076
+
+(Return)
+
+G1 X0.00000 Y0.00000 F500.00000
+(G4 P0.1)
+G1 Z0.00000
diff --git a/test/gcode/braid_cut2d.nc b/test/gcode/braid_cut2d.nc
index 6a6771d..1e8deda 100644
--- a/test/gcode/braid_cut2d.nc
+++ b/test/gcode/braid_cut2d.nc
@@ -3,9 +3,8 @@ G17G21
 G0Z20.000
 G0X0.000Y0.000S8000M3
 G0X0.000Y-33.519Z6.000
-G1Z-1.000
+G1Z-1.000F7000.0
 G1X0.327Y-33.521
-F7000.0
 X0.654Y-33.526
 X0.980Y-33.534
 X1.304Y-33.546