ManuelW/grbl-LPC-CoreXY
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity

Cleaned-up limit pin reporting and comments.

Browse Source 
- Cleaned up the limit pin state reporting option to display only the
state per axis, rather than the whole port. It’s organized by an XYZ
order, 0(low)-1(high), and generally looks like `Lim:001`.

- Separated the control pin state reporting from limit state reporting
as a new compile option. This stayed the same in terms of showing the
entire port in binary, since it’s not anticipated that this will be
used much, if at all.

- Updated some of the gcode source comments regarding supported g-codes.
This commit is contained in:
Sungeun Jeon
2015-03-14 09:27:48 -06:00
parent e832595e6d
commit 24ce518fda
5 changed files with 30 additions and 15 deletions
Download Patch File Download Diff File Expand all files Collapse all files

9
grbl/gcode.h
View File

@ -30,14 +30,14 @@
// and are similar/identical to other g-code interpreters by manufacturers (Haas,Fanuc,Mazak,etc).
// NOTE: Modal group define values must be sequential and starting from zero.
#define MODAL_GROUP_G0 0 // [G4,G10,G28,G28.1,G30,G30.1,G53,G92,G92.1] Non-modal
#define MODAL_GROUP_G1 1 // [G0,G1,G2,G3,G38.2,G80] Motion
#define MODAL_GROUP_G1 1 // [G0,G1,G2,G3,G38.2,G38.3,G38.4,G38.5,G80] Motion
#define MODAL_GROUP_G2 2 // [G17,G18,G19] Plane selection
#define MODAL_GROUP_G3 3 // [G90,G91] Distance mode
#define MODAL_GROUP_G4 4 // [G90.1,G91.1] Arc IJK distance mode
#define MODAL_GROUP_G4 4 // [G91.1] Arc IJK distance mode
#define MODAL_GROUP_G5 5 // [G93,G94] Feed rate mode
#define MODAL_GROUP_G6 6 // [G20,G21] Units
#define MODAL_GROUP_G7 7 // [G40] Cutter radius compensation mode. G41/42 NOT SUPPORTED.
#define MODAL_GROUP_G8 8 // [G43,G43.1,G49] Tool length offset
#define MODAL_GROUP_G8 8 // [G43.1,G49] Tool length offset
#define MODAL_GROUP_G12 9 // [G54,G55,G56,G57,G58,G59] Coordinate system selection
#define MODAL_GROUP_M4 10 // [M0,M1,M2,M30] Stopping
@ -142,8 +142,9 @@ typedef struct {
uint8_t feed_rate; // {G93,G94}
uint8_t units; // {G20,G21}
uint8_t distance; // {G90,G91}
// uint8_t distance_arc; // {G91.1} NOTE: Don't track. Only one supported.
uint8_t plane_select; // {G17,G18,G19}
// uint8_t cutter_comp; // {G40} NOTE: Don't need to track since it's always disabled.
// uint8_t cutter_comp; // {G40} NOTE: Don't track. Only one supported.
uint8_t tool_length; // {G43.1,G49}
uint8_t coord_select; // {G54,G55,G56,G57,G58,G59}
uint8_t program_flow; // {M0,M1,M2,M30}