ManuelW/grbl-LPC-CoreXY
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity

Compile-option for inverting spindle enable.

Browse Source 
- Installed a compile-option for inverting the spindle enable pin for
certain electronics boards users have reported needing this.
This commit is contained in:
Sungeun Jeon
2015-03-27 19:59:34 -06:00
parent ed29d8a122
commit 234195e721
2 changed files with 27 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
grbl/config.h
View File

@ -156,6 +156,13 @@
// NOTE: Will eventually be added to Grbl settings in v1.0.
// #define INVERT_CONTROL_PIN // Default disabled. Uncomment to enable.
// Inverts the spindle enable pin from low-disabled/high-enabled to low-enabled/high-disabled. Useful
// for some pre-built electronic boards.
// NOTE: If VARIABLE_SPINDLE is enabled(default), this option has no effect as the PWM output and
// spindle enable are combined to one pin. If you need both this option and spindle speed PWM,
// uncomment the config option USE_SPINDLE_DIR_AS_ENABLE_PIN below.
// #define INVERT_SPINDLE_ENABLE_PIN // Default disabled. Uncomment to enable.
// Enable limit pin states feedback in status reports. The data is presented as 0 (low) or 1(high),
// where the order is XYZ. For example, if the Y- and Z-limit pins are active, Grbl will include the
// following string in the status report "Lim:011". This is generally useful for setting up a new