ManuelW/grbl-LPC-CoreXY
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity

Syntax fix for gcode.c

Browse Source 
- Whoops! Missed a bracket and it wasn’t compiling. Now fixed.

- Updated the unsupported gcodes listed at the end of the gcode.c file.
This commit is contained in:
Sonny Jeon 2014-07-06 15:42:40 -06:00
parent dab4535729
commit 145cea2dd0
1 changed files with 4 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
gcode.c
View File

@ -575,7 +575,7 @@ uint8_t gc_execute_line(char *line)
// target position with the coordinate system offsets, G92 offsets, absolute override, and distance // target position with the coordinate system offsets, G92 offsets, absolute override, and distance
// modes applied. This includes the motion mode commands. We can now pre-compute the target position. // modes applied. This includes the motion mode commands. We can now pre-compute the target position.
// NOTE: Tool offsets may be appended to these conversions when/if this feature is added. // NOTE: Tool offsets may be appended to these conversions when/if this feature is added.
if (axis_command != AXIS_COMMAND_TOOL_LENGTH_OFFSET ) // TLO block any axis command. if (axis_command != AXIS_COMMAND_TOOL_LENGTH_OFFSET ) { // TLO block any axis command.
if (axis_words) { if (axis_words) {
for (idx=0; idx<N_AXIS; idx++) { // Axes indices are consistent, so loop may be used to save flash space. for (idx=0; idx<N_AXIS; idx++) { // Axes indices are consistent, so loop may be used to save flash space.
if ( bit_isfalse(axis_words,bit(idx)) ) { if ( bit_isfalse(axis_words,bit(idx)) ) {
@ -1013,7 +1013,10 @@ uint8_t gc_execute_line(char *line)
group 1 = {G81 - G89} (Motion modes: Canned cycles) group 1 = {G81 - G89} (Motion modes: Canned cycles)
group 4 = {M1} (Optional stop, ignored) group 4 = {M1} (Optional stop, ignored)
group 6 = {M6} (Tool change) group 6 = {M6} (Tool change)
group 7 = {G40, G41, G42} cutter radius compensation
group 8 = {G43} tool length offset (But G43.1/G94 IS SUPPORTED)
group 8 = {*M7} enable mist coolant group 8 = {*M7} enable mist coolant
group 9 = {M48, M49} enable/disable feed and speed override switches group 9 = {M48, M49} enable/disable feed and speed override switches
group 10 = {G98, G99} return mode canned cycles
group 13 = {G61, G61.1, G64} path control mode group 13 = {G61, G61.1, G64} path control mode
*/ */