From 0f9c02842c92abda96ee5f274be1cc71adb11089 Mon Sep 17 00:00:00 2001 From: Manuel Weiser Date: Sun, 8 Dec 2019 07:08:24 +0000 Subject: [PATCH] max_rate and max_travel changed --- grbl/defaults.h | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/grbl/defaults.h b/grbl/defaults.h index ffacec5..2489a63 100644 --- a/grbl/defaults.h +++ b/grbl/defaults.h @@ -30,24 +30,24 @@ #ifdef DEFAULTS_GENERIC // Grbl generic default settings. Should work across different machines. // See https://github.com/gnea/grbl/wiki/Grbl-v1.1-Configuration for setting descriptions. - #define DEFAULT_X_STEPS_PER_MM 250.0 // $100 steps (X steps per mm) - #define DEFAULT_Y_STEPS_PER_MM 250.0 // $101 steps (Y steps per mm) - #define DEFAULT_Z_STEPS_PER_MM 250.0 // $102 steps (Z steps per mm) + #define DEFAULT_X_STEPS_PER_MM 160.0 // $100 steps (X steps per mm) + #define DEFAULT_Y_STEPS_PER_MM 160.0 // $101 steps (Y steps per mm) + #define DEFAULT_Z_STEPS_PER_MM 160.0 // $102 steps (Z steps per mm) #define DEFAULT_A_STEPS_PER_MM 160.0 // $103 steps (A steps per mm) - #define DEFAULT_X_MAX_RATE 500.0 // $110 mm/min (X max speed) - #define DEFAULT_Y_MAX_RATE 500.0 // $111 mm/min (Y max speed) - #define DEFAULT_Z_MAX_RATE 500.0 // $112 mm/min (Z max speed) - #define DEFAULT_A_MAX_RATE 500.0 // $113 mm/min (A max speed) + #define DEFAULT_X_MAX_RATE 30000.0 // $110 mm/min (X max speed) + #define DEFAULT_Y_MAX_RATE 30000.0 // $111 mm/min (Y max speed) + #define DEFAULT_Z_MAX_RATE 30000.0 // $112 mm/min (Z max speed) + #define DEFAULT_A_MAX_RATE 30000.0 // $113 mm/min (A max speed) #define DEFAULT_X_ACCELERATION (10.0*60*60)// $120 mm/min^2 (X max acceleration) #define DEFAULT_Y_ACCELERATION (10.0*60*60)// $121 mm/min^2 (Y max acceleration) #define DEFAULT_Z_ACCELERATION (10.0*60*60)// $122 mm/min^2 (Z max acceleration) #define DEFAULT_A_ACCELERATION (10.0*60*60)// $123 mm/min^2 (A max acceleration) - #define DEFAULT_X_MAX_TRAVEL 200.0 // $130 mm (X max travel; must be positive) - #define DEFAULT_Y_MAX_TRAVEL 200.0 // $131 mm (Y max travel; must be positive) - #define DEFAULT_Z_MAX_TRAVEL 200.0 // $132 mm (Z max travel; must be positive) + #define DEFAULT_X_MAX_TRAVEL 500.0 // $130 mm (X max travel; must be positive) + #define DEFAULT_Y_MAX_TRAVEL 500.0 // $131 mm (Y max travel; must be positive) + #define DEFAULT_Z_MAX_TRAVEL 500.0 // $132 mm (Z max travel; must be positive) #define DEFAULT_A_MAX_TRAVEL 1.0 // $133 mm (A max travel; must be positive) - #define DEFAULT_X_CURRENT 0.6 // $140 amps (X stepper current [disabled]) - #define DEFAULT_Y_CURRENT 0.6 // $141 amps (Y stepper current [disabled]) + #define DEFAULT_X_CURRENT 0.7 // $140 amps (X stepper current [disabled]) + #define DEFAULT_Y_CURRENT 0.7 // $141 amps (Y stepper current [disabled]) #define DEFAULT_Z_CURRENT 0.0 // $142 amps (Z stepper current [disabled]) #define DEFAULT_A_CURRENT 0.0 // $143 amps (A stepper current [disabled]) @@ -87,10 +87,10 @@ #define DEFAULT_Y_STEPS_PER_MM 160.0 #define DEFAULT_Z_STEPS_PER_MM 160.0 #define DEFAULT_A_STEPS_PER_MM 160.0 - #define DEFAULT_X_MAX_RATE 24000.0 // mm/min - #define DEFAULT_Y_MAX_RATE 24000.0 // mm/min - #define DEFAULT_Z_MAX_RATE 24000.0 // mm/min - #define DEFAULT_A_MAX_RATE 24000.0 // mm/min + #define DEFAULT_X_MAX_RATE 30000.0 // mm/min + #define DEFAULT_Y_MAX_RATE 30000.0 // mm/min + #define DEFAULT_Z_MAX_RATE 30000.0 // mm/min + #define DEFAULT_A_MAX_RATE 30000.0 // mm/min #define DEFAULT_X_ACCELERATION (2500.0*60*60) // 2500*60*60 mm/min^2 = 2500 mm/sec^2 #define DEFAULT_Y_ACCELERATION (2500.0*60*60) // 2500*60*60 mm/min^2 = 2500 mm/sec^2 #define DEFAULT_Z_ACCELERATION (2500.0*60*60) // 2500*60*60 mm/min^2 = 2500 mm/sec^2 @@ -99,8 +99,8 @@ #define DEFAULT_Y_CURRENT 0.6 // amps #define DEFAULT_Z_CURRENT 0.0 // amps #define DEFAULT_A_CURRENT 0.0 // amps - #define DEFAULT_X_MAX_TRAVEL 300.0 // mm NOTE: Must be a positive value. - #define DEFAULT_Y_MAX_TRAVEL 200.0 // mm NOTE: Must be a positive value. + #define DEFAULT_X_MAX_TRAVEL 500.0 // mm NOTE: Must be a positive value. + #define DEFAULT_Y_MAX_TRAVEL 500.0 // mm NOTE: Must be a positive value. #define DEFAULT_Z_MAX_TRAVEL 50.0 // mm NOTE: Must be a positive value. #define DEFAULT_A_MAX_TRAVEL 100.0 // mm NOTE: Must be a positive value. #define DEFAULT_SPINDLE_PWM_FREQ 5000 // Hz (2000 - 20000)