ManuelW/grbl-LPC-CoreXY
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity

Added $33 for PWM frequency and defaults for K40

Browse Source
This commit is contained in:
cprezzi
2017-05-10 18:01:55 +02:00
parent 063b1f6748
commit 0471485259
7 changed files with 83 additions and 15 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
grbl/config.h
View File

@ -36,6 +36,7 @@
// one configuration file by placing their specific defaults and pin map at the bottom of this file.
// If doing so, simply comment out these two defines and see instructions below.
// #define DEFAULTS_GENERIC
#define DEFAULTS_K40
// #define CPU_MAP_ATMEGA328P // Arduino Uno CPU
// Serial baud rate
@ -756,9 +757,9 @@
#define DEFAULT_Y_MAX_TRAVEL 200.0 // mm
#define DEFAULT_Z_MAX_TRAVEL 50.0 // mm
#define DEFAULT_SPINDLE_PWM_FREQ 5000 // Hz
#define DEFAULT_SPINDLE_RPM_MAX 1.0 // rpm
#define DEFAULT_SPINDLE_RPM_MAX 1000.0 // rpm
#define DEFAULT_SPINDLE_RPM_MIN 0.0 // rpm
#define DEFAULT_STEP_PULSE_MICROSECONDS 1
#define DEFAULT_STEP_PULSE_MICROSECONDS 10
#define DEFAULT_STEPPING_INVERT_MASK 0
#define DEFAULT_DIRECTION_INVERT_MASK 0
#define DEFAULT_STEPPER_IDLE_LOCK_TIME 25 // msec (0-254, 255 keeps steppers enabled)