ManuelW/grbl-LPC-CoreXY
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity
6ad9806584
grbl-LPC-CoreXY/spindle_control.h

41 lines
1.2 KiB
C
Raw Normal View History

version 0.1
2009-01-25 00:48:56 +01:00
/*
spindle_control.h - spindle control methods
Updated licensing
2014-08-07 13:58:04 +02:00
Part of Grbl v0.9
version 0.1
2009-01-25 00:48:56 +01:00
Minor bug fixes: Homing travel calculations. Cycle resuming after spindle and dwell commands. - Homing travel calculations fixed. It was computing the min travel rather than max. - Auto-start disable and pausing after spindle or dwell commands. Related to plan_synchronize() function call. Now fixed, but still need to work on the system state. - Pushed a fix to make this branch more Arduino IDE compatible. Removed extern call in nuts_bolts.c - Updated the stepper configuration option of enabling or disabling the new Adaptive Multi-Axis Step Smoothing Algorithm. Now works either way. - Updated some copyright info.
2013-12-31 06:02:05 +01:00
Copyright (c) 2012-2014 Sungeun K. Jeon
version 0.1
2009-01-25 00:48:56 +01:00
Grbl is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Grbl is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
*/
Updated licensing
2014-08-07 13:58:04 +02:00
/*
This file is based on work from Grbl v0.8, distributed under the
terms of the MIT-license. See COPYING for more details.
Copyright (c) 2009-2011 Simen Svale Skogsrud
Copyright (c) 2012 Sungeun K. Jeon
*/
version 0.1
2009-01-25 00:48:56 +01:00
#ifndef spindle_control_h
#define spindle_control_h
Lots of re-organization and cleaning-up. Some bug fixes. - Added a new source and header file called system. These files contain the system commands and variables, as well as all of the system headers and standard libraries Grbl uses. Centralizing some of the code. - Re-organized the include headers throughout the source code. - ENABLE_M7 define was missing from config.h. Now there. - SPINDLE_MAX_RPM and SPINDLE_MIN_RPM now defined in config.h. No uncommenting to prevent user issues. Minimum spindle RPM now provides the lower, near 0V, scale adjustment, i.e. some spindles can go really slow so why use up our 256 voltage bins for them? - Remove some persistent variables from coolant and spindle control. They were redundant. - Removed a VARIABLE_SPINDLE define in cpu_map.h that shouldn’t have been there. - Changed the DEFAULT_ARC_TOLERANCE to 0.002mm to improve arc tracing. Before we had issues with performance, no longer. - Fixed a bug with the hard limits and the software debounce feature enabled. The invert limit pin setting wasn’t honored. - Fixed a bug with the homing direction mask. Now is like it used to be. At least for now. - Re-organized main.c to serve as only as the reset/initialization routine. Makes things a little bit clearer in terms of execution procedures. - Re-organized protocol.c as the overall master control unit for execution procedures. Not quite there yet, but starting to make a little more sense in how things are run. - Removed updating of old settings records. So many new settings have been added that it’s not worth adding the code to migrate old user settings. - Tweaked spindle_control.c a bit and made it more clear and consistent with other parts of Grbl. - Tweaked the stepper disable bit code in stepper.c. Requires less flash memory.
2014-01-11 04:22:10 +01:00
Cleaned up variable spindle output (PWM). Code and config comments. - Variable spindle speed output as a configuration option. Thanks @EliteEng! When enabled, the Z-limit (D11) and spindle enable(D12) pins switch to allow access to the hardware PWM output on pin D11. Otherwise, everything should work as it does. - Removed option for inverting the spindle and coolant enable pins. This is a safety hazard, especially for the spindle. When Grbl initializes, all pins are momentarily low until it finishes booting. If an invert is enabled, this means the spindles can be energized briefly during this time. If users need signal inversion, it’s recommended to just wire in an inversion circuit instead. - Cleared out references to spindle variable output in terms of step signal. This isn’t complete and requires more deliberation before installing. - Cleared up and cleaned up some code and config comments.
2014-01-04 20:12:44 +01:00
// Initializes spindle pins and hardware PWM, if enabled.
version 0.1
2009-01-25 00:48:56 +01:00
void spindle_init();
Cleaned up variable spindle output (PWM). Code and config comments. - Variable spindle speed output as a configuration option. Thanks @EliteEng! When enabled, the Z-limit (D11) and spindle enable(D12) pins switch to allow access to the hardware PWM output on pin D11. Otherwise, everything should work as it does. - Removed option for inverting the spindle and coolant enable pins. This is a safety hazard, especially for the spindle. When Grbl initializes, all pins are momentarily low until it finishes booting. If an invert is enabled, this means the spindles can be energized briefly during this time. If users need signal inversion, it’s recommended to just wire in an inversion circuit instead. - Cleared out references to spindle variable output in terms of step signal. This isn’t complete and requires more deliberation before installing. - Cleared up and cleaned up some code and config comments.
2014-01-04 20:12:44 +01:00
// Sets spindle direction and spindle rpm via PWM, if enabled.
Lots of re-organization and cleaning-up. Some bug fixes. - Added a new source and header file called system. These files contain the system commands and variables, as well as all of the system headers and standard libraries Grbl uses. Centralizing some of the code. - Re-organized the include headers throughout the source code. - ENABLE_M7 define was missing from config.h. Now there. - SPINDLE_MAX_RPM and SPINDLE_MIN_RPM now defined in config.h. No uncommenting to prevent user issues. Minimum spindle RPM now provides the lower, near 0V, scale adjustment, i.e. some spindles can go really slow so why use up our 256 voltage bins for them? - Remove some persistent variables from coolant and spindle control. They were redundant. - Removed a VARIABLE_SPINDLE define in cpu_map.h that shouldn’t have been there. - Changed the DEFAULT_ARC_TOLERANCE to 0.002mm to improve arc tracing. Before we had issues with performance, no longer. - Fixed a bug with the hard limits and the software debounce feature enabled. The invert limit pin setting wasn’t honored. - Fixed a bug with the homing direction mask. Now is like it used to be. At least for now. - Re-organized main.c to serve as only as the reset/initialization routine. Makes things a little bit clearer in terms of execution procedures. - Re-organized protocol.c as the overall master control unit for execution procedures. Not quite there yet, but starting to make a little more sense in how things are run. - Removed updating of old settings records. So many new settings have been added that it’s not worth adding the code to migrate old user settings. - Tweaked spindle_control.c a bit and made it more clear and consistent with other parts of Grbl. - Tweaked the stepper disable bit code in stepper.c. Requires less flash memory.
2014-01-11 04:22:10 +01:00
void spindle_run(uint8_t direction, float rpm);
Cleaned up variable spindle output (PWM). Code and config comments. - Variable spindle speed output as a configuration option. Thanks @EliteEng! When enabled, the Z-limit (D11) and spindle enable(D12) pins switch to allow access to the hardware PWM output on pin D11. Otherwise, everything should work as it does. - Removed option for inverting the spindle and coolant enable pins. This is a safety hazard, especially for the spindle. When Grbl initializes, all pins are momentarily low until it finishes booting. If an invert is enabled, this means the spindles can be energized briefly during this time. If users need signal inversion, it’s recommended to just wire in an inversion circuit instead. - Cleared out references to spindle variable output in terms of step signal. This isn’t complete and requires more deliberation before installing. - Cleared up and cleaned up some code and config comments.
2014-01-04 20:12:44 +01:00
// Kills spindle.
version 0.1
2009-01-25 00:48:56 +01:00
void spindle_stop();
#endif
Reference in New Issue Copy Permalink