Added instructions for Node-RED

Updated Features

README.md

@@ -40,16 +40,20 @@ Features
 * Adjust the color
 * Adapted patterns to look great on the [DIY-Nanoleaf Replica](https://www.thingiverse.com/thing:3354082)
 * OTA-Update support
+* **Node-RED** integration :white_check_mark:
+* Simple Amazon **Alexa** integration :white_check_mark:
+* Custom pattern designer :white_check_mark:
+* **Node-RED** webinterface to store special patterns persistant :white_check_mark:
 
 
 
 ### Upcoming Features
 
-- **Node-RED** integration
+- **Node-RED** integration :white_check_mark:
-  - Simple Amazon **Alexa** integration
+  - Simple Amazon **Alexa** integration :white_check_mark:
-  - Nanoleaf voice control
+  - Nanoleaf voice control :white_check_mark:
-  - Custom color pattern designer
+  - Custom pattern designer :white_check_mark:
-  - **Node-RED** webinterface to store special patterns persistant
+  - **Node-RED** webinterface to store special patterns persistant :white_check_mark:
   - Controlling multiple nanoleafs at once
 - Advanced Amazon **Alexa** integration with custom skill (AWS account required, free)
 >  these features will be optional and require additional hardware (any linux/windows device that is in the same network)
@@ -124,6 +128,262 @@ You should also set the milli-amps of your power supply to prevent power overloa
 
 
 
+
+
+#  Node-RED & Alexa integration Setup
+## Features
+
+### **Amazon Alexa Integration** (optional)
+
+It works with any language that is supported by Alexa and can be easily expanded to support more activities or patterns. How you want to call them (Nanoleaf, Nanoleafs, Nano, Triangles) must be set in the setup of the devices.
+
+#### **Commands**:
+
+- Turn on/off
+- Control Brightness
+- Control Pattern Speed					    
+- Set Color
+- Set into Rainbow mode					  
+- Enable Autoplay and set Duration	
+- Activate custom activities		
+
+> *Alexa, turn Nanoleafs **on/off***
+> *Alexa, set Nanoleafs 70%*
+> Alexa, dim Nanoleafs
+> *Alexa, Nanoleaf speed 20%*
+> *Alexa, set Nanoleafs pink*
+> *Alexa, turn Nanoleaf rainbow on*
+> *Alexa, turn Nanoleaf Autoplay on*
+> *Alexa, set Nanoleaf Autoplay 40*
+>
+> Alexa, Nanoleaf Default
+> Alexa, Nanoleaf Mode 1
+> Alexa, Nanoleaf Mode 2
+> Alexa, Nanoleaf Mode 3
+
+
+
+### Node-RED GUI
+
+The Node-RED GUI is an addition to the regular UI that is running on the Wemos D1 mini. It allows to create and save custom patterns and also control all regular parameters same as the ESP8266 webserver. It can be accessed by any device.
+
+ ![full](https://github.com/NimmLor/esp8266-nanoleaf-webserver/blob/master/gallery/NodeRED_UI/full.png?raw=true)
+
+
+
+#### Nanoleaf Designer
+
+In the Node-RED GUI you can easily create your nanoleaf setup by using the *Nanoleaf Designer*. It's easy to use and allows almost any design that is possible. But it might have still some minor bugs.
+
+![nanoleaf_designer](https://github.com/NimmLor/esp8266-nanoleaf-webserver/blob/master/gallery/NodeRED_UI/nanoleaf_designer.png?raw=true)
+
+
+
+![nanoleaf_designer_2](https://github.com/NimmLor/esp8266-nanoleaf-webserver/blob/master/gallery/NodeRED_UI/nanoleaf_designer_2.png?raw=true)
+
+
+
+#### Nanoleaf Custom Pattern Designer
+
+With the *Nanoleaf Custom Pattern Designer* you can create custom patterns with effects. Currently the individual leafs can be set to *Static* mode and *Breathe* mode that allows to set a phase shift and lets the leafs breathe. Flow-mode follows in the next update.
+
+![pattern_designer](https://github.com/NimmLor/esp8266-nanoleaf-webserver/blob/master/gallery/NodeRED_UI/pattern_designer.png?raw=true)
+
+
+
+![pattern_designer_2](https://github.com/NimmLor/esp8266-nanoleaf-webserver/blob/master/gallery/NodeRED_UI/pattern_designer_2.png?raw=true)
+
+
+
+![patternlist](https://github.com/NimmLor/esp8266-nanoleaf-webserver/blob/master/gallery/NodeRED_UI/patternlist.png?raw=true)
+
+
+
+
+
+## What you will need
+
+- Any device that runs Node-RED, examples would be:
+  - (recommended)  [Raspberry Pi](https://www.amazon.de/gp/product/B01CD5VC92?ie=UTF8&tag=surrbradl08-21&camp=1638&linkCode=xm2&creativeASIN=B01CD5VC92)
+  - Any Linux machine
+  - (instructions are provided for linux) Any Windows machine
+- Any Amazon Alexa device for Alexa integration, works on Android and IOS too (**OPTIONAL**)
+
+
+
+
+
+## Setup
+
+#### 1. Install Node-RED
+
+```bash
+bash <(curl -sL https://raw.githubusercontent.com/node-red/raspbian-deb-package/master/resources/update-nodejs-and-nodered)
+```
+
+
+
+#### 2. Install npm - this might be already installed
+
+```bash
+sudo apt-get install nodejs npm -y
+```
+
+
+
+#### 3. Install dashboard, alexa-home-skill, color-convert, config
+
+```bash
+cd $HOME/.node-red
+npm install node-red-dashboard
+```
+
+- if you get an error try: `npm install --unsafe-perm node-red-dashboard`
+
+```bash
+npm install node-red-contrib-alexa-home-skill
+npm install node-red-contrib-color-convert
+npm install node-red-contrib-config
+```
+
+
+
+#### 4. Setup a static IP-Address for your Raspberry Pi (optional)
+
+- (recommended) Setup a static ip on your router
+- [or on your Raspberry Pi](http://www.circuitbasics.com/how-to-set-up-a-static-ip-on-the-raspberry-pi/)
+
+
+
+#### 6. Run Node-RED
+
+To start Node-RED type into the shell:
+
+```bash
+sudo node-red-start
+```
+
+Connect to the GUI by typing the following line into your browser:
+
+- http://IP-ADDRESS:1880
+
+
+
+#### 3. Import the flow
+
+- Click on the 3 dashes in the top right corner → import → clipboard
+
+![import](D:\OneDrive\3DPrinting\Thingiverse\Node-Red-Leafs\Noderedpart\images\import.png?raw=true)
+
+
+
+#### Configure the IP-Address of the Wemos D1 mini
+
+Edit the Nanoleaf-Config node to set the IP-Address.
+
+![config_1](https://github.com/NimmLor/esp8266-nanoleaf-webserver/blob/master/gallery/NodeRED_UI/config_1.png?raw=true)
+
+![config_2](https://github.com/NimmLor/esp8266-nanoleaf-webserver/blob/master/gallery/NodeRED_UI/config_2.png?raw=true)
+
+
+
+
+
+## Amazon Alexa setup
+
+The Alexa integration uses the *Node-RED Alexa Home Skill Bridge* to redirect the commands from alexa to Node-RED.
+
+
+
+### 1. Create a new Bridge account
+
+Head to https://alexa-node-red.bm.hardill.me.uk/newuser and create a new account.
+
+Afterwards login into your account.
+
+
+
+### 2. Create the Devices
+
+You have to create devices that are called by Alexa.
+
+#### 2.1 Main Nanoleaf Device
+
+First create the devices that control a few devices that are used to turn on/off the nanoleafs and controls the brightness. I've called them "Nanoleafs", "Nanoleaf", "Nano" and "Triangles", but a single one would be enough too.
+
+Click the **Add Device** button and choose. Repeat this step for all your names.
+
+![device_1](https://github.com/NimmLor/esp8266-nanoleaf-webserver/blob/master/gallery/NodeRED_UI/device_1.png?raw=true)
+
+![device_2](https://github.com/NimmLor/esp8266-nanoleaf-webserver/blob/master/gallery/NodeRED_UI/device_2.png?raw=true)
+
+
+
+#### 2.2 Autoplay control Device (optional)
+
+To control the autoplay functionality, create a device with **On, Off, %, +%, -%, LIGHT**.
+
+
+
+#### 2.3 Speed control Device (optional) 
+
+To control the speed of the animations,  create a device with **%, +%, -%**.
+
+
+
+#### 2.4 Activities (optional)
+
+Now create activities by clicking *Add Device* and selecting **On, Off, ACTIVITY**.
+
+I've created one to set the *Rainbow* pattern, one for my default settings and Nanoleaf Mode 1-3 for some custom settings.
+
+![device_3](https://github.com/NimmLor/esp8266-nanoleaf-webserver/blob/master/gallery/NodeRED_UI/device_3.png?raw=true)
+
+![device_4](https://github.com/NimmLor/esp8266-nanoleaf-webserver/blob/master/gallery/NodeRED_UI/device_4.png?raw=true)
+
+
+
+### 3. Activating the Alexa skill
+
+Open the app on your phone or head to https://alexa.amazon.de and click on **Skills**.
+
+Search for **Node-RED** and activate the skill. Afterwards you are prompted to login into your account that you have created the devices beforehand.
+
+![1551006980428](https://github.com/NimmLor/esp8266-nanoleaf-webserver/blob/master/gallery/NodeRED_UI/1551006980428.png?raw=true)
+
+
+
+### 4. Add a new Alexa-Home-Skill configuration
+
+Click on any Alexa node in the flow, and click *Add new alexa-home-configuration*. Afterwards hit the refresh button next to the devices list.
+
+![conf_1](https://github.com/NimmLor/esp8266-nanoleaf-webserver/blob/master/gallery/NodeRED_UI/conf_1.png?raw=true)
+
+
+
+
+
+### 5. Select the devices
+
+Click the alexa skill nodes in the flow and select the corresponding devices. **Delete all unused alexa nodes**.
+
+For me, it looked like this:
+
+![device_config](https://github.com/NimmLor/esp8266-nanoleaf-webserver/blob/master/gallery/NodeRED_UI/device_config.png?raw=true)
+
+### 6. Discover the Smart-Home Devices
+
+Speak to Alexa and say to her: **Alexa, discover devices**. (Just say it in english, it works on every device)
+
+If everything worked correctly she should tell you after around 30 seconds that she has found new devices.
+
+
+
+
+
+
+
+
 Technical information
 -----------------