ntoff
212f6a7cf8
Add lock button
...
https://github.com/ntoff/OctoPrint-FanSpeedSlider/issues/10
2018-12-05 02:10:11 +10:00
ntoff
5dc813fb7b
add init min and max pwm
2018-11-17 11:41:55 +10:00
ntoff
b5693e2e34
fix regex not matching properly for low digit count values of S
...
see issue #9
2018-04-25 14:35:06 +10:00
ntoff
1c6e0d442e
changes to the settings page
...
added helpful popup hints and removed the somewhat obvious line of text about limiting the fans output.
2017-11-18 08:00:16 +10:00
ntoff
22ce5c7ec7
increase the div width in settings to 90%
2017-11-18 07:55:30 +10:00
ntoff
ab2fa40b32
remove unnecessary css
...
plugin should now rely on touchUI's own css so removed my dodgy fix
2017-11-18 07:22:26 +10:00
ntoff
47a3537490
move input box under touchUI + fix non functional button
...
move the input box over underneath the feedrate / flowrate to keep them all in the same spot and fix the stupid button not working in firefox (NFI why it didn't work, the code is literally the same it's just in a new spot. GG)
2017-11-18 07:21:29 +10:00
ntoff
d2f1ed57ad
add settings cleanup function
...
Clean up and remove empty config if everything is set to default values
2017-11-18 06:31:22 +10:00
ntoff
f13fda67e2
modify settings saving to save integers
2017-11-18 05:59:54 +10:00
ntoff
59ef6652eb
remove use strict
...
testing's over, remove "use strict"
2017-11-18 05:02:44 +10:00
ntoff
c7c2f52149
add some comments
...
clarify fan speeds are 0-100% not 0-255 pwm values
2017-11-18 05:01:52 +10:00
ntoff
943fca8581
control -> settings + tweak info timeout
...
for some reason I was saving settings in the control viewmodel, changed to the settings viewmodel and increased the default time the notices are visible by 1 second
2017-11-18 04:36:40 +10:00
ntoff
b359461d80
fix issue with touch ui max slider value being wrong and fix padding
...
if touchui was active the max value was 255, also added a bit of extra width so the button doesn't resize (at least when the button text is in english)
2017-11-18 04:18:37 +10:00
ntoff
addd0ffa4b
check for notifications and don't display if one is active
...
check for high / low speed out of range popups and only display one, block popping up of multiple notifications for the same event
2017-11-12 16:26:38 +10:00
ntoff
70d3e0803b
separate stuff into their own functions
...
move percent to pwm function and checking the slider value is within range into their own functions
2017-11-12 06:33:51 +10:00
ntoff
3049d0fedf
fix default fan speed slider position
...
oops, forgot the last bit of the if else statement
2017-11-12 05:19:12 +10:00
ntoff
21e4627da2
missing span on touchui button + less global
...
hopefully nothing global "use strict" seems to not complain :D
2017-11-12 04:46:00 +10:00
ntoff
a47ead4db3
tweak settings loader
...
parseint to make sure we're loading numbers and tweak the slider to adapt to the min/max value on UI load if the default value is outside the allowed range
2017-11-12 03:38:25 +10:00
ntoff
f7faf42a87
remove unnecessary added classes
...
get rid of the extra classes added to make finding the buttons easier, turns out they aren't needed
2017-11-12 02:20:17 +10:00
ntoff
deb15025d8
min/max requirement notification text fix
...
speed decrease notification used "meet minimum requirement" which might be misleading, changed to "meet maximum requirement"
2017-11-12 01:11:36 +10:00
ntoff
175722a015
fix javascript console logging of fan speed notification
...
log was being output after the slider was set causing it to display the wrong value
2017-11-12 01:08:27 +10:00
ntoff
f4bb25718a
add some notifications about fan speed being altered
...
Added a popup notification (can be disabled) and some console log text if the fan speed is altered. Also made the slider snap to the min/max value if it is out of range to give visual feedback that the plugin is doing something to the fan speed.
2017-11-12 01:02:29 +10:00
ntoff
7bdd260617
use other view model push method
...
http://docs.octoprint.org/en/master/plugins/viewmodels.html#registering-custom-viewmodels says the other way is depreciated
2017-11-11 21:41:07 +10:00
ntoff
0e71971e66
add percentage to logger message
...
add a more "human readable" percentage value to the logged fan speed (if modified)
2017-11-11 21:31:05 +10:00
ntoff
99364df94e
wrap it in a try catch
...
Hopefully when something in my plugin breaks (that's when, not if) it won't take down all of octoprint's UI.
2017-11-06 17:23:25 +10:00
ntoff
9fe9e04016
fix button while printing (touchUI)
...
missed that one :(
2017-10-11 23:18:34 +10:00
ntoff
0462a7552e
fix buttons disabled during printing
...
closes #3
2017-09-25 06:42:02 +10:00
ntoff
988512f522
rename default fan speed variable to be more clear
2017-09-06 17:52:23 +10:00
ntoff
b03a045b24
self fanpwn
2017-09-05 22:57:53 +10:00
ntoff
6124bba2e7
try rounding
2017-09-05 11:13:39 +10:00
ntoff
554d78efb7
make same code into a function
2017-09-05 10:57:55 +10:00
ntoff
525a08c20e
update settings page help text
2017-09-05 10:56:39 +10:00
ntoff
2cc132213f
added some comments
2017-09-05 09:37:05 +10:00
ntoff
30ee76bf7e
add a limiter
2017-09-05 03:52:55 +10:00
ntoff
4df6a99238
change inline help text a bit
2017-09-03 17:19:23 +10:00
ntoff
18f009fa85
add a setting to change the default value of the slider
2017-08-31 18:09:07 +10:00
ntoff
05e2e10497
touch ui compatibility
2017-08-30 18:28:26 +10:00
ntoff
594455ef61
upload
2017-08-29 07:10:51 +10:00
