OctoPrint-FanSpeedSlider/README.md

# Fan Speed Slider Plugin

Add a slider to control the speed of a parts cooling fan. The default value of the slider is user configurable, however the value doesn't limit the output of the fan during a print, for that you'll have to use your slicer.

![](./image/slider.JPG)

*Note: Slider does __not__ follow the speed of the fan. If the fan speed is set via gcode or an LCD panel on the printer, the slider will not respond to the change.*

## Setup

Install manually using this URL:

    https://github.com/ntoff/OctoPrint-fanspeedslider/archive/master.zip
add a setting to change the default value of the slider 2017-08-30 14:39:57 +02:00			`# Fan Speed Slider Plugin`
upload 2017-08-28 23:10:51 +02:00
add a setting to change the default value of the slider 2017-08-30 14:39:57 +02:00			`Add a slider to control the speed of a parts cooling fan. The default value of the slider is user configurable, however the value doesn't limit the output of the fan during a print, for that you'll have to use your slicer.`
upload 2017-08-28 23:10:51 +02:00
			`![](./image/slider.JPG)`

			`Note: Slider does __not__ follow the speed of the fan. If the fan speed is set via gcode or an LCD panel on the printer, the slider will not respond to the change.`

			`## Setup`

			`Install manually using this URL:`

			`https://github.com/ntoff/OctoPrint-fanspeedslider/archive/master.zip`