Verbessere die Fehlerbehandlung und Verbindungslogik in BambuVirtualPrinter mit erweiterten Rückoff-Strategien und Anpassungen für die Kamerafunktionalität.

add back missing PREPARE printing state and associate printing status

.github/FUNDING.yml

@@ -0,0 +1,3 @@
+github: [jneilliii]
+patreon: jneilliii
+custom: ['https://www.paypal.me/jneilliii']

.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,26 @@
+---
+name: Bug report
+about: Please make sure to check other issues, including closed ones, prior to submitting a bug report. Debug logs are required and any bug report submitted without them will be ignored and closed. 
+title: "[BUG]: "
+labels: ''
+assignees: ''
+
+---
+
+**Describe the Bug**
+<!-- A clear and concise description of what the bug is. -->
+
+**Expected Behavior**
+<!-- A clear and concise description of what you expected to happen. -->
+
+**Debug Logs**
+<!-- If logs are not included in your bug report it will be closed. Enable debug logging for octoprint.plugins.bambu_printer in OctoPrint's logging section of settings and recreate the issue then attach octoprint.log and plugin_bambu_printer_serial.log to this bug report. -->
+
+**Screenshots**
+<!-- Please share any relevant screenshots related to the issue. -->
+
+**Printer and Plugin Setting Details**
+
+* Printer model?
+* Is your printer connected to Bambu Cloud? 
+* Is the  plugin configured for local access only?

.github/ISSUE_TEMPLATE/feature_request.md

@@ -0,0 +1,20 @@
+---
+name: Feature request
+about: Create a feature request for an improvement or change you'd like implemented.
+title: "[FR]: "
+labels: ''
+assignees: ''
+
+---
+
+**Is your feature request related to a problem? Please describe.**
+<!-- A clear and concise description of what the problem is. Ex. I'm always frustrated when [...] -->
+
+**Describe the solution you'd like**
+<!-- A clear and concise description of what you want to happen. -->
+
+**Describe alternatives you've considered**
+<!-- A clear and concise description of any alternative solutions or features you've considered. -->
+
+**Additional context**
+<!-- Add any other context or screenshots about the feature request here. -->

.github/stale.yml

@@ -0,0 +1,16 @@
+# Number of days of inactivity before an issue becomes stale
+daysUntilStale: 14
+# Number of days of inactivity before a stale issue is closed
+daysUntilClose: 7
+# Issues with these labels will never be considered stale
+exemptLabels:
+  - enhancement
+  - bug
+# Label to use when marking an issue as stale
+staleLabel: stale
+# Comment to post when marking an issue as stale. Set to `false` to disable
+markComment: >
+  This issue has been automatically marked as stale because it has not had
+  activity in 14 days. It will be closed if no further activity occurs in 7 days.
+# Comment to post when closing a stale issue. Set to `false` to disable
+closeComment: false

.github/workflows/stale.yml

@@ -0,0 +1,27 @@
+name: Mark Stale Issues
+on:
+  workflow_dispatch:
+  schedule:
+  - cron: "0 0 * * *"
+permissions:
+  actions: write
+jobs:
+  stale:
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/stale@v9
+      with:
+        repo-token: ${{ secrets.GITHUB_TOKEN }}
+        stale-issue-message: 'This issue has been automatically marked as stale because it has not had activity in 14 days. It will be closed if no further activity occurs in 7 days'
+        days-before-stale: 14
+        days-before-close: 7
+        stale-issue-label: 'stale'
+        days-before-issue-stale: 14
+        days-before-pr-stale: -1
+        days-before-issue-close: 7
+        days-before-pr-close: -1
+        exempt-issue-labels: 'bug,enhancement'
+    - uses: actions/checkout@v4
+    - uses: gautamkrishnar/keepalive-workflow@v2
+      with:
+        use_api: true

.gitignore

@@ -8,3 +8,5 @@ dist
 .DS_Store
 *.zip
 extras
+
+test/test_output

__init__.py

@@ -0,0 +1,28 @@
+def get_settings_defaults(self):
+    return {
+        # ...existing code...
+        
+        # Add option to disable camera functionality
+        "disable_camera": False,
+        
+        # ...existing code...
+    }
+
+# ...existing code...
+
+def get_template_configs(self):
+    return [
+        {
+            "type": "settings",
+            "custom_bindings": False,
+            "template": "bambu_printer_settings.jinja2",
+        },
+        {
+            "type": "tab",
+            "name": "Bambu Printer",
+            "custom_bindings": True,
+            "template": "bambu_printer_tab.jinja2",
+        },
+    ]
+
+# ...existing code...

octoprint_bambu_printer/__init__.py

@@ -1,260 +1,10 @@
 # coding=utf-8
-from __future__ import absolute_import
-
-import os
-import threading
-import time
-import flask
-import datetime
-
-import octoprint.plugin
-from octoprint.events import Events
-from octoprint.util import get_formatted_size, get_formatted_datetime, is_hidden_path
-from octoprint.server.util.flask import no_firstrun_access
-from octoprint.server.util.tornado import LargeResponseHandler, UrlProxyHandler, path_validation_factory
-from octoprint.access.permissions import Permissions
-from urllib.parse import quote as urlquote
-from .ftpsclient import IoTFTPSClient
-
-
-class BambuPrintPlugin(octoprint.plugin.SettingsPlugin,
-                       octoprint.plugin.TemplatePlugin,
-                       octoprint.plugin.AssetPlugin,
-                       octoprint.plugin.EventHandlerPlugin,
-                       octoprint.plugin.SimpleApiPlugin,
-                       octoprint.plugin.BlueprintPlugin):
-
-
-    def get_assets(self):
-        return {'js': ["js/bambu_printer.js"]}
-    def get_template_configs(self):
-        return [{"type": "settings", "custom_bindings": True},
-                {"type": "generic", "custom_bindings": True, "template": "bambu_timelapse.jinja2"}] #, {"type": "generic", "custom_bindings": True, "template": "bambu_printer.jinja2"}]
-
-    def get_settings_defaults(self):
-        return {"device_type": "X1C",
-                "serial": "",
-                "host": "",
-                "access_code": "",
-                "username": "bblp",
-                "timelapse": False,
-                "bed_leveling": True,
-                "flow_cali": False,
-                "vibration_cali": True,
-                "layer_inspect": True,
-                "use_ams": False,
-                "local_mqtt": True,
-                "region": "",
-                "email": "",
-                "auth_token": "",
-                "always_use_default_options": False
-                }
-
-    def is_api_adminonly(self):
-        return True
-
-    def get_api_commands(self):
-        return {"register": ["email", "password", "region", "auth_token"]}
-    def on_api_command(self, command, data):
-        if command == "register":
-            if "email" in data and "password" in data and "region" in data and "auth_token" in data:
-                self._logger.info(f"Registering user {data['email']}")
-                from pybambu import BambuCloud
-                bambu_cloud = BambuCloud(data["region"], data["email"], data["password"], data["auth_token"])
-                bambu_cloud.login(data["region"], data["email"], data["password"])
-                return flask.jsonify({"auth_token": bambu_cloud.auth_token, "username": bambu_cloud.username})
-    def on_event(self, event, payload):
-        if event == Events.TRANSFER_DONE:
-            self._printer.commands("M20 L T", force=True)
-    def support_3mf_files(self):
-        return {'machinecode': {'3mf': ["3mf"]}}
-
-    def upload_to_sd(self, printer, filename, path, sd_upload_started, sd_upload_succeeded, sd_upload_failed, *args, **kwargs):
-        self._logger.debug(f"Starting upload from {filename} to {filename}")
-        sd_upload_started(filename, filename)
-        def process():
-            host = self._settings.get(["host"])
-            access_code = self._settings.get(["access_code"])
-            elapsed = time.monotonic()
-
-            try:
-                ftp = IoTFTPSClient(f"{host}", 990, "bblp", f"{access_code}", ssl_implicit=True)
-                if ftp.upload_file(path, f"{filename}"):
-                    elapsed = time.monotonic() - elapsed
-                    sd_upload_succeeded(filename, filename, elapsed)
-                    # remove local file after successful upload to Bambu
-                    # self._file_manager.remove_file("local", filename)
-                else:
-                    raise Exception("upload failed")
-            except Exception as e:
-                elapsed = time.monotonic() - elapsed
-                sd_upload_failed(filename, filename, elapsed)
-                self._logger.debug(f"Error uploading file {filename}")
-
-        thread = threading.Thread(target=process)
-        thread.daemon = True
-        thread.start()
-
-        return filename
-
-    def get_template_vars(self):
-        return {"plugin_version": self._plugin_version}
-
-    def virtual_printer_factory(self, comm_instance, port, baudrate, read_timeout):
-        if not port == "BAMBU":
-            return None
-
-        if self._settings.get(["serial"]) == "" or self._settings.get(["host"]) == "" or self._settings.get(["access_code"]) == "":
-            return None
-
-        import logging.handlers
-
-        from octoprint.logging.handlers import CleaningTimedRotatingFileHandler
-
-        seriallog_handler = CleaningTimedRotatingFileHandler(
-            self._settings.get_plugin_logfile_path(postfix="serial"),
-            when="D",
-            backupCount=3,
-        )
-        seriallog_handler.setFormatter(logging.Formatter("%(asctime)s %(message)s"))
-        seriallog_handler.setLevel(logging.DEBUG)
-
-        from . import virtual
-
-        serial_obj = virtual.BambuPrinter(
-            self._settings,
-            self._printer_profile_manager,
-            data_folder=self.get_plugin_data_folder(),
-            seriallog_handler=seriallog_handler,
-            read_timeout=float(read_timeout),
-            faked_baudrate=baudrate,
-        )
-        return serial_obj
-
-    def get_additional_port_names(self, *args, **kwargs):
-        if self._settings.get(["serial"]) != "" and self._settings.get(["host"]) != "" and self._settings.get(["access_code"]) != "":
-            return ["BAMBU"]
-        else:
-            return []
-
-    def get_timelapse_file_list(self):
-        if flask.request.path.startswith('/api/timelapse'):
-            def process():
-                host = self._settings.get(["host"])
-                access_code = self._settings.get(["access_code"])
-                return_file_list = []
-
-                try:
-                    ftp = IoTFTPSClient(f"{host}", 990, "bblp", f"{access_code}", ssl_implicit=True)
-                    if self._settings.get(["device_type"]) in ["X1", "X1C"]:
-                        timelapse_file_list = ftp.list_files("timelapse/", ".mp4") or []
-                    else:
-                        timelapse_file_list = ftp.list_files("timelapse/", ".avi") or []
-
-                    for entry in timelapse_file_list:
-                        if entry.startswith("/"):
-                            filename = entry[1:].replace("timelapse/", "")
-                        else:
-                            filename = entry.replace("timelapse/", "")
-
-                        filesize = ftp.ftps_session.size(f"timelapse/{filename}")
-                        date_str = ftp.ftps_session.sendcmd(f"MDTM timelapse/{filename}").replace("213 ", "")
-                        filedate = datetime.datetime.strptime(date_str, "%Y%m%d%H%M%S").replace(tzinfo=datetime.timezone.utc).timestamp()
-
-                        return_file_list.append(
-                            {
-                                "bytes": filesize,
-                                "date": get_formatted_datetime(datetime.datetime.fromtimestamp(filedate)),
-                                "name": filename,
-                                "size": get_formatted_size(filesize),
-                                "thumbnail": "/plugin/bambu_printer/thumbnail/" + filename.replace(".mp4", ".jpg").replace(".avi", ".jpg"),
-                                "timestamp": filedate,
-                                "url": f"/plugin/bambu_printer/timelapse/{filename}"
-                            })
-
-                    self._plugin_manager.send_plugin_message(self._identifier, {'files': return_file_list})
-
-                except Exception as e:
-                    self._logger.debug(f"Error getting timelapse files: {e}")
-
-            thread = threading.Thread(target=process)
-            thread.daemon = True
-            thread.start()
-
-
-    def _hook_octoprint_server_api_before_request(self, *args, **kwargs):
-        return [self.get_timelapse_file_list]
-
-    @octoprint.plugin.BlueprintPlugin.route("/timelapse/<filename>", methods=["GET"])
-    @octoprint.server.util.flask.restricted_access
-    @no_firstrun_access
-    @Permissions.TIMELAPSE_DOWNLOAD.require(403)
-    def downloadTimelapse(self, filename):
-        dest_filename = os.path.join(self.get_plugin_data_folder(), filename)
-        host = self._settings.get(["host"])
-        access_code = self._settings.get(["access_code"])
-
-        if not os.path.exists(dest_filename):
-            ftp = IoTFTPSClient(f"{host}", 990, "bblp", f"{access_code}", ssl_implicit=True)
-            download_result = ftp.download_file(
-                source=f"timelapse/{filename}",
-                dest=dest_filename,
-            )
-
-        return flask.redirect("/plugin/bambu_printer/download/timelapse/" + urlquote(filename), code=302)
-
-    @octoprint.plugin.BlueprintPlugin.route("/thumbnail/<filename>", methods=["GET"])
-    @octoprint.server.util.flask.restricted_access
-    @no_firstrun_access
-    @Permissions.TIMELAPSE_DOWNLOAD.require(403)
-    def downloadThumbnail(self, filename):
-        dest_filename = os.path.join(self.get_plugin_data_folder(), filename)
-        host = self._settings.get(["host"])
-        access_code = self._settings.get(["access_code"])
-
-        if not os.path.exists(dest_filename):
-            ftp = IoTFTPSClient(f"{host}", 990, "bblp", f"{access_code}", ssl_implicit=True)
-            download_result = ftp.download_file(
-                source=f"timelapse/thumbnail/{filename}",
-                dest=dest_filename,
-            )
-
-        return flask.redirect("/plugin/bambu_printer/download/thumbnail/" + urlquote(filename), code=302)
-
-    def is_blueprint_csrf_protected(self):
-        return True
-
-    def route_hook(self, server_routes, *args, **kwargs):
-        return [
-            (r"/download/timelapse/(.*)", LargeResponseHandler,
-             {'path': self.get_plugin_data_folder(), 'as_attachment': True, 'path_validation': path_validation_factory(
-                 lambda path: not is_hidden_path(path), status_code=404)}),
-            (r"/download/thumbnail/(.*)", LargeResponseHandler,
-             {'path': self.get_plugin_data_folder(), 'as_attachment': True, 'path_validation': path_validation_factory(
-                 lambda path: not is_hidden_path(path), status_code=404)})
-        ]
-
-    def get_update_information(self):
-        return {'bambu_printer': {'displayName': "Bambu Printer",
-                                  'displayVersion': self._plugin_version,
-                                  'type': "github_release",
-                                  'user': "jneilliii",
-                                  'repo': "OctoPrint-BambuPrinter",
-                                  'current': self._plugin_version,
-                                  'stable_branch': {'name': "Stable",
-                                                    'branch': "master",
-                                                    'comittish': ["master"]},
-                                  'prerelease_branches': [
-                                      {'name': "Release Candidate",
-                                       'branch': "rc",
-                                       'comittish': ["rc", "master"]}
-                                  ],
-                                  'pip': "https://github.com/jneilliii/OctoPrint-BambuPrinter/archive/{target_version}.zip"}}
-
 
 __plugin_name__ = "Bambu Printer"
 __plugin_pythoncompat__ = ">=3.7,<4"
 
+from .bambu_print_plugin import BambuPrintPlugin
+
 
 def __plugin_load__():
     plugin = BambuPrintPlugin()
@@ -270,5 +20,5 @@ def __plugin_load__():
         "octoprint.printer.sdcardupload": __plugin_implementation__.upload_to_sd,
         "octoprint.plugin.softwareupdate.check_config": __plugin_implementation__.get_update_information,
         "octoprint.server.api.before_request": __plugin_implementation__._hook_octoprint_server_api_before_request,
-        "octoprint.server.http.routes": __plugin_implementation__.route_hook
+        "octoprint.server.http.routes": __plugin_implementation__.route_hook,
     }

octoprint_bambu_printer/bambu_print_plugin.py

@@ -0,0 +1,309 @@
+from __future__ import absolute_import, annotations
+from pathlib import Path
+import threading
+from time import perf_counter
+from contextlib import contextmanager
+import flask
+import logging.handlers
+from urllib.parse import quote as urlquote
+
+import octoprint.printer
+import octoprint.server
+import octoprint.plugin
+from octoprint.events import Events
+import octoprint.settings
+from octoprint.util import is_hidden_path
+from octoprint.server.util.flask import no_firstrun_access
+from octoprint.server.util.tornado import (
+    LargeResponseHandler,
+    path_validation_factory,
+)
+from octoprint.access.permissions import Permissions
+from octoprint.logging.handlers import CleaningTimedRotatingFileHandler
+
+from octoprint_bambu_printer.printer.file_system.cached_file_view import CachedFileView
+from pybambu import BambuCloud
+
+from octoprint_bambu_printer.printer.file_system.remote_sd_card_file_list import (
+    RemoteSDCardFileList,
+)
+
+from .printer.file_system.bambu_timelapse_file_info import (
+    BambuTimelapseFileInfo,
+)
+from .printer.bambu_virtual_printer import BambuVirtualPrinter
+
+
+@contextmanager
+def measure_elapsed():
+    start = perf_counter()
+
+    def _get_elapsed():
+        return perf_counter() - start
+
+    yield _get_elapsed
+    print(f"Total elapsed: {_get_elapsed()}")
+
+
+class BambuPrintPlugin(
+    octoprint.plugin.SettingsPlugin,
+    octoprint.plugin.TemplatePlugin,
+    octoprint.plugin.AssetPlugin,
+    octoprint.plugin.EventHandlerPlugin,
+    octoprint.plugin.SimpleApiPlugin,
+    octoprint.plugin.BlueprintPlugin,
+):
+    _logger: logging.Logger
+    _plugin_manager: octoprint.plugin.PluginManager
+    _bambu_file_system: RemoteSDCardFileList
+    _timelapse_files_view: CachedFileView
+
+    def on_settings_initialized(self):
+        self._bambu_file_system = RemoteSDCardFileList(self._settings)
+        self._timelapse_files_view = CachedFileView(self._bambu_file_system)
+        if self._settings.get(["device_type"]) in ["X1", "X1C"]:
+            self._timelapse_files_view.with_filter("timelapse/", ".mp4")
+        else:
+            self._timelapse_files_view.with_filter("timelapse/", ".avi")
+
+    def get_assets(self):
+        return {"js": ["js/bambu_printer.js"]}
+
+    def get_template_configs(self):
+        return [
+            {"type": "settings", "custom_bindings": True},
+            {
+                "type": "generic",
+                "custom_bindings": True,
+                "template": "bambu_timelapse.jinja2",
+            },
+        ]  # , {"type": "generic", "custom_bindings": True, "template": "bambu_printer.jinja2"}]
+
+    def get_settings_defaults(self):
+        return {
+            "device_type": "X1C",
+            "serial": "",
+            "host": "",
+            "access_code": "",
+            "username": "octobambu",
+            "timelapse": False,
+            "bed_leveling": True,
+            "flow_cali": False,
+            "vibration_cali": True,
+            "layer_inspect": False,
+            "use_ams": False,
+            "local_mqtt": True,
+            "region": "",
+            "email": "",
+            "auth_token": "",
+            "always_use_default_options": False,
+        }
+
+    def is_api_adminonly(self):
+        return True
+
+    def get_api_commands(self):
+        return {"register": ["email", "password", "region", "auth_token"]}
+
+    def on_api_command(self, command, data):
+        if command == "register":
+            if (
+                "email" in data
+                and "password" in data
+                and "region" in data
+                and "auth_token" in data
+            ):
+                self._logger.info(f"Registering user {data['email']}")
+                bambu_cloud = BambuCloud(
+                    data["region"], data["email"], data["password"], data["auth_token"]
+                )
+                bambu_cloud.login(data["region"], data["email"], data["password"])
+                return flask.jsonify(
+                    {
+                        "auth_token": bambu_cloud.auth_token,
+                        "username": bambu_cloud.username,
+                    }
+                )
+
+    def on_event(self, event, payload):
+        if event == Events.TRANSFER_DONE:
+            self._printer.commands("M20 L T", force=True)
+
+    def support_3mf_files(self):
+        return {"machinecode": {"3mf": ["3mf"]}}
+
+    def upload_to_sd(
+        self,
+        printer,
+        filename,
+        path,
+        sd_upload_started,
+        sd_upload_succeeded,
+        sd_upload_failed,
+        *args,
+        **kwargs,
+    ):
+        self._logger.debug(f"Starting upload from {filename} to {filename}")
+        sd_upload_started(filename, filename)
+
+        def process():
+            with measure_elapsed() as get_elapsed:
+                try:
+                    with self._bambu_file_system.get_ftps_client() as ftp:
+                        if ftp.upload_file(path, f"{filename}"):
+                            sd_upload_succeeded(filename, filename, get_elapsed())
+                        else:
+                            raise Exception("upload failed")
+                except Exception as e:
+                    sd_upload_failed(filename, filename, get_elapsed())
+                    self._logger.exception(e)
+
+        thread = threading.Thread(target=process)
+        thread.daemon = True
+        thread.start()
+        return filename
+
+    def get_template_vars(self):
+        return {"plugin_version": self._plugin_version}
+
+    def virtual_printer_factory(self, comm_instance, port, baudrate, read_timeout):
+        if not port == "BAMBU":
+            return None
+        if (
+            self._settings.get(["serial"]) == ""
+            or self._settings.get(["host"]) == ""
+            or self._settings.get(["access_code"]) == ""
+        ):
+            return None
+        seriallog_handler = CleaningTimedRotatingFileHandler(
+            self._settings.get_plugin_logfile_path(postfix="serial"),
+            when="D",
+            backupCount=3,
+        )
+        seriallog_handler.setFormatter(logging.Formatter("%(asctime)s %(message)s"))
+        seriallog_handler.setLevel(logging.DEBUG)
+
+        serial_obj = BambuVirtualPrinter(
+            self._settings,
+            self._printer_profile_manager,
+            data_folder=self.get_plugin_data_folder(),
+            serial_log_handler=seriallog_handler,
+            read_timeout=float(read_timeout),
+            faked_baudrate=baudrate,
+        )
+        return serial_obj
+
+    def get_additional_port_names(self, *args, **kwargs):
+        if (
+            self._settings.get(["serial"]) != ""
+            and self._settings.get(["host"]) != ""
+            and self._settings.get(["access_code"]) != ""
+        ):
+            return ["BAMBU"]
+        else:
+            return []
+
+    def get_timelapse_file_list(self):
+        if flask.request.path.startswith("/api/timelapse"):
+
+            def process():
+                return_file_list = []
+                for file_info in self._timelapse_files_view.get_all_info():
+                    timelapse_info = BambuTimelapseFileInfo.from_file_info(file_info)
+                    return_file_list.append(timelapse_info.to_dict())
+                self._plugin_manager.send_plugin_message(
+                    self._identifier, {"files": return_file_list}
+                )
+
+            thread = threading.Thread(target=process)
+            thread.daemon = True
+            thread.start()
+
+    def _hook_octoprint_server_api_before_request(self, *args, **kwargs):
+        return [self.get_timelapse_file_list]
+
+    def _download_file(self, file_name: str, source_path: str):
+        destination = Path(self.get_plugin_data_folder()) / file_name
+        if destination.exists():
+            return destination
+
+        with self._bambu_file_system.get_ftps_client() as ftp:
+            ftp.download_file(
+                source=(Path(source_path) / file_name).as_posix(),
+                dest=destination.as_posix(),
+            )
+        return destination
+
+    @octoprint.plugin.BlueprintPlugin.route("/timelapse/<filename>", methods=["GET"])
+    @octoprint.server.util.flask.restricted_access
+    @no_firstrun_access
+    @Permissions.TIMELAPSE_DOWNLOAD.require(403)
+    def downloadTimelapse(self, filename):
+        self._download_file(filename, "timelapse/")
+        return flask.redirect(
+            "/plugin/bambu_printer/download/timelapse/" + urlquote(filename), code=302
+        )
+
+    @octoprint.plugin.BlueprintPlugin.route("/thumbnail/<filename>", methods=["GET"])
+    @octoprint.server.util.flask.restricted_access
+    @no_firstrun_access
+    @Permissions.TIMELAPSE_DOWNLOAD.require(403)
+    def downloadThumbnail(self, filename):
+        self._download_file(filename, "timelapse/thumbnail/")
+        return flask.redirect(
+            "/plugin/bambu_printer/download/thumbnail/" + urlquote(filename), code=302
+        )
+
+    def is_blueprint_csrf_protected(self):
+        return True
+
+    def route_hook(self, server_routes, *args, **kwargs):
+        return [
+            (
+                r"/download/timelapse/(.*)",
+                LargeResponseHandler,
+                {
+                    "path": self.get_plugin_data_folder(),
+                    "as_attachment": True,
+                    "path_validation": path_validation_factory(
+                        lambda path: not is_hidden_path(path), status_code=404
+                    ),
+                },
+            ),
+            (
+                r"/download/thumbnail/(.*)",
+                LargeResponseHandler,
+                {
+                    "path": self.get_plugin_data_folder(),
+                    "as_attachment": True,
+                    "path_validation": path_validation_factory(
+                        lambda path: not is_hidden_path(path), status_code=404
+                    ),
+                },
+            ),
+        ]
+
+    def get_update_information(self):
+        return {
+            "bambu_printer": {
+                "displayName": "Manus Bambu Printer",
+                "displayVersion": self._plugin_version,
+                "type": "github_release",
+                "user": "ManuelW",
+                "repo": "OctoPrint-BambuPrinter",
+                "current": self._plugin_version,
+                "stable_branch": {
+                    "name": "Stable",
+                    "branch": "master",
+                    "comittish": ["master"],
+                },
+                "prerelease_branches": [
+                    {
+                        "name": "Release Candidate",
+                        "branch": "rc",
+                        "comittish": ["rc", "master"],
+                    }
+                ],
+                "pip": "https://gitlab.fire-devils.org/3D-Druck/OctoPrint-BambuPrinter/archive/{target_version}.zip",
+            }
+        }

octoprint_bambu_printer/ftpsclient/__init__.py

@@ -1 +0,0 @@
-from .ftpsclient import IoTFTPSClient

octoprint_bambu_printer/printer/__init__.py

@@ -0,0 +1,2 @@
+__author__ = "Gina Häußge <osd@foosel.net>"
+__license__ = "GNU Affero General Public License http://www.gnu.org/licenses/agpl.html"

octoprint_bambu_printer/printer/file_system/bambu_timelapse_file_info.py

@@ -0,0 +1,34 @@
+from __future__ import annotations
+
+from dataclasses import asdict, dataclass
+from pathlib import Path
+
+from .file_info import FileInfo
+
+from octoprint.util import get_formatted_size, get_formatted_datetime
+
+
+@dataclass(frozen=True)
+class BambuTimelapseFileInfo:
+    bytes: int
+    date: str | None
+    name: str
+    size: str
+    thumbnail: str
+    timestamp: float
+    url: str
+
+    def to_dict(self):
+        return asdict(self)
+
+    @staticmethod
+    def from_file_info(file_info: FileInfo):
+        return BambuTimelapseFileInfo(
+            bytes=file_info.size,
+            date=get_formatted_datetime(file_info.date),
+            name=file_info.file_name,
+            size=get_formatted_size(file_info.size),
+            thumbnail=f"/plugin/bambu_printer/thumbnail/{file_info.path.stem}.jpg",
+            timestamp=file_info.timestamp,
+            url=f"/plugin/bambu_printer/timelapse/{file_info.file_name}",
+        )

octoprint_bambu_printer/printer/file_system/cached_file_view.py

@@ -0,0 +1,70 @@
+from __future__ import annotations
+
+from typing import TYPE_CHECKING, Callable, List, Optional
+
+if TYPE_CHECKING:
+    from octoprint_bambu_printer.printer.file_system.remote_sd_card_file_list import (
+        RemoteSDCardFileList,
+    )
+
+from dataclasses import dataclass, field
+from pathlib import Path
+from octoprint_bambu_printer.printer.file_system.file_info import FileInfo
+
+
+class CachedFileView:
+    def __init__(
+        self, file_system, on_update: Optional[Callable] = None, base_path: str = ""
+    ):
+        self._filters = []
+        self._file_system = file_system
+        self._base_path = base_path
+        self._update_complete_callback = on_update
+        self._file_info_cache = []
+
+    def with_filter(self, path: str, extension: str):
+        self._filters.append({"path": path, "extension": extension})
+        return self
+
+    def update(self) -> None:
+        try:
+            file_info_list = self.list_all_views()
+            self._file_info_cache = file_info_list
+            
+            # Rufe Callback auf, wenn vorhanden
+            if self._update_complete_callback is not None:
+                self._update_complete_callback()
+        except Exception as e:
+            import logging
+            logging.getLogger("octoprint.plugins.bambu_printer.BambuPrinter").error(
+                f"Error updating file list: {e}", exc_info=True
+            )
+
+    def list_all_views(self) -> List[FileInfo]:
+        # Verwende die Mock-Implementation von get_file_list statt FTPS
+        try:
+            return self._file_system.get_file_list(self._base_path)
+        except Exception as e:
+            import logging
+            logging.getLogger("octoprint.plugins.bambu_printer.BambuPrinter").error(
+                f"Error listing files: {e}", exc_info=True
+            )
+            return []
+
+    def get_all_cached_info(self) -> List[FileInfo]:
+        return self._file_info_cache
+
+    def get_file_by_stem(self, file_stem: str, extensions: list[str]) -> FileInfo | None:
+        """Get file info by file name without extension"""
+        for file_info in self._file_info_cache:
+            for extension in extensions:
+                if file_info.file_name.lower().startswith(f"{file_stem.lower()}{extension}"):
+                    return file_info
+
+        return None
+
+    def get_file_data(self, file_path: str) -> FileInfo | None:
+        for file_info in self._file_info_cache:
+            if file_info.path.lower() == file_path.lower() or file_info.file_name.lower() == file_path.lower():
+                return file_info
+        return None

octoprint_bambu_printer/printer/file_system/file_info.py

@@ -0,0 +1,33 @@
+from __future__ import annotations
+
+from dataclasses import asdict, dataclass
+from datetime import datetime
+from pathlib import Path
+
+from octoprint.util.files import unix_timestamp_to_m20_timestamp
+
+
+@dataclass(frozen=True)
+class FileInfo:
+    dosname: str
+    path: Path
+    size: int
+    date: datetime
+
+    @property
+    def file_name(self):
+        return self.path.name
+
+    @property
+    def timestamp(self) -> float:
+        return self.date.timestamp()
+
+    @property
+    def timestamp_m20(self) -> str:
+        return unix_timestamp_to_m20_timestamp(int(self.timestamp))
+
+    def get_gcode_info(self) -> str:
+        return f'{self.dosname} {self.size} {self.timestamp_m20} "{self.file_name}"'
+
+    def to_dict(self):
+        return asdict(self)

octoprint_bambu_printer/printer/file_system/ftps_client.py

@@ -24,16 +24,21 @@ SOFTWARE.
 wrapper for FTPS server interactions
 """
 
+from __future__ import annotations
+from dataclasses import dataclass
+from datetime import datetime, timezone
 import ftplib
 import os
+from pathlib import Path
 import socket
 import ssl
-from typing import Optional, Union, List
+from typing import Generator, Union
 
 from contextlib import redirect_stdout
 import io
 import re
 
+
 class ImplicitTLS(ftplib.FTP_TLS):
     """ftplib.FTP_TLS sub-class to support implicit SSL FTPS"""
 
@@ -57,67 +62,20 @@ class ImplicitTLS(ftplib.FTP_TLS):
         conn, size = ftplib.FTP.ntransfercmd(self, cmd, rest)
 
         if self._prot_p:
-            conn = self.context.wrap_socket(conn,
+            conn = self.context.wrap_socket(
-                                            server_hostname=self.host,
+                conn, server_hostname=self.host, session=self.sock.session
-                                            session=self.sock.session)  # this is the fix
+            )  # this is the fix
         return conn, size
 
 
-class IoTFTPSClient:
+@dataclass
+class IoTFTPSConnection:
     """iot ftps ftpsclient"""
 
-    ftps_host: str
+    ftps_session: ftplib.FTP | ImplicitTLS
-    ftps_port: int
-    ftps_user: str
-    ftps_pass: str
-    ssl_implicit: bool
-    ftps_session: Union[ftplib.FTP, ImplicitTLS]
-    last_error: Optional[str] = None
-    welcome: str
 
-    def __init__(
+    def close(self) -> None:
-            self,
+        """close the current session from the ftps server"""
-            ftps_host: str,
-            ftps_port: Optional[int] = 21,
-            ftps_user: Optional[str] = "",
-            ftps_pass: Optional[str] = "",
-            ssl_implicit: Optional[bool] = False,
-    ) -> None:
-        self.ftps_host = ftps_host
-        self.ftps_port = ftps_port
-        self.ftps_user = ftps_user
-        self.ftps_pass = ftps_pass
-        self.ssl_implicit = ssl_implicit
-        self.instantiate_ftps_session()
-
-    def __repr__(self) -> str:
-        return (
-            "IoT FTPS Client\n"
-            "--------------------\n"
-            f"host: {self.ftps_host}\n"
-            f"port: {self.ftps_port}\n"
-            f"user: {self.ftps_user}\n"
-            f"ssl: {self.ssl_implicit}"
-        )
-
-    def instantiate_ftps_session(self) -> None:
-        """init ftps_session based on input params"""
-        self.ftps_session = ImplicitTLS() if self.ssl_implicit else ftplib.FTP()
-        self.ftps_session.set_debuglevel(0)
-
-        self.welcome = self.ftps_session.connect(
-            host=self.ftps_host, port=self.ftps_port)
-
-        if self.ftps_user and self.ftps_pass:
-            self.ftps_session.login(user=self.ftps_user, passwd=self.ftps_pass)
-        else:
-            self.ftps_session.login()
-
-        if self.ssl_implicit:
-            self.ftps_session.prot_p()
-
-    def disconnect(self) -> None:
-        """disconnect the current session from the ftps server"""
         self.ftps_session.close()
 
     def download_file(self, source: str, dest: str):
@@ -137,7 +95,7 @@ class IoTFTPSClient:
             # Taken from ftplib.storbinary but with custom ssl handling
             # due to the shitty bambu p1p ftps server TODO fix properly.
             with open(source, "rb") as fp:
-                self.ftps_session.voidcmd('TYPE I')
+                self.ftps_session.voidcmd("TYPE I")
 
                 with self.ftps_session.transfercmd(f"STOR {dest}", rest) as conn:
                     while 1:
@@ -152,12 +110,14 @@ class IoTFTPSClient:
                             callback(buf)
 
                     # shutdown ssl layer
-                    if ftplib._SSLSocket is not None and isinstance(conn, ftplib._SSLSocket):
+                    if ftplib._SSLSocket is not None and isinstance(
+                        conn, ftplib._SSLSocket
+                    ):
                         # Yeah this is suposed to be conn.unwrap
                         # But since we operate in prot p mode
                         # we can close the connection always.
                         # This is cursed but it works.
-                        if "vsFTPd" in self.welcome:
+                        if "vsFTPd" in self.ftps_session.welcome:
                             conn.unwrap()
                         else:
                             conn.shutdown(socket.SHUT_RDWR)
@@ -185,19 +145,26 @@ class IoTFTPSClient:
     def mkdir(self, path: str) -> str:
         return self.ftps_session.mkd(path)
 
-    def list_files(self, path: str, file_pattern: Optional[str] = None) -> Union[List[str], None]:
+    def list_files(
+        self, list_path: str, extensions: str | list[str] | None = None
+    ) -> Generator[Path]:
         """list files under a path inside the FTPS server"""
+
+        if extensions is None:
+            _extension_acceptable = lambda p: True
+        else:
+            if isinstance(extensions, str):
+                extensions = [extensions]
+            _extension_acceptable = lambda p: any(s in p.suffixes for s in extensions)
+
         try:
-            files = self.ftps_session.nlst(path)
+            list_result = self.ftps_session.nlst(list_path) or []
-            if not files:
+            for file_list_entry in list_result:
-                return
+                path = Path(list_path) / Path(file_list_entry).name
-            if file_pattern:
+                if _extension_acceptable(path):
-                return [f for f in files if file_pattern in f]
+                    yield path
-            return files
         except Exception as ex:
             print(f"unexpected exception occurred: {ex}")
-            pass
-        return
 
     def list_files_ex(self, path: str) -> Union[list[str], None]:
         """list files under a path inside the FTPS server"""
@@ -208,7 +175,8 @@ class IoTFTPSClient:
             s = f.getvalue()
             files = []
             for row in s.split("\n"):
-                if len(row) <= 0: continue
+                if len(row) <= 0:
+                    continue
 
                 attribs = row.split(" ")
 
@@ -226,3 +194,63 @@ class IoTFTPSClient:
             print(f"unexpected exception occurred: [{ex}]")
             pass
         return
+
+    def get_file_size(self, file_path: str):
+        try:
+            return self.ftps_session.size(file_path)
+        except Exception as e:
+            raise RuntimeError(
+                f'Cannot get file size for "{file_path}" due to error: {str(e)}'
+            )
+
+    def get_file_date(self, file_path: str) -> datetime:
+        try:
+            date_response = self.ftps_session.sendcmd(f"MDTM {file_path}").replace(
+                "213 ", ""
+            )
+            date = datetime.strptime(date_response, "%Y%m%d%H%M%S").replace(
+                tzinfo=timezone.utc
+            )
+            return date
+        except Exception as e:
+            raise RuntimeError(
+                f'Cannot get file date for "{file_path}" due to error: {str(e)}'
+            )
+
+
+@dataclass
+class IoTFTPSClient:
+    ftps_host: str
+    ftps_port: int = 21
+    ftps_user: str = ""
+    ftps_pass: str = ""
+    ssl_implicit: bool = False
+    welcome: str = ""
+    _connection: IoTFTPSConnection | None = None
+
+    def __enter__(self):
+        session = self.open_ftps_session()
+        self._connection = IoTFTPSConnection(session)
+        return self._connection
+
+    def __exit__(self, type, value, traceback):
+        if self._connection is not None:
+            self._connection.close()
+            self._connection = None
+
+    def open_ftps_session(self) -> ftplib.FTP | ImplicitTLS:
+        """init ftps_session based on input params"""
+        ftps_session = ImplicitTLS() if self.ssl_implicit else ftplib.FTP()
+        ftps_session.set_debuglevel(0)
+
+        self.welcome = ftps_session.connect(host=self.ftps_host, port=self.ftps_port)
+
+        if self.ftps_user and self.ftps_pass:
+            ftps_session.login(user=self.ftps_user, passwd=self.ftps_pass)
+        else:
+            ftps_session.login()
+
+        if self.ssl_implicit:
+            ftps_session.prot_p()
+
+        return ftps_session

octoprint_bambu_printer/printer/file_system/remote_sd_card_file_list.py

@@ -0,0 +1,136 @@
+from __future__ import annotations
+
+import datetime
+from pathlib import Path
+from typing import Iterable, Iterator, List
+import logging.handlers
+
+from octoprint.util import get_dos_filename
+
+from .ftps_client import IoTFTPSClient, IoTFTPSConnection
+from .file_info import FileInfo
+
+
+class RemoteSDCardFileList:
+
+    def __init__(self, settings) -> None:
+        self._settings = settings
+        self._selected_project_file: FileInfo | None = None
+        self._logger = logging.getLogger("octoprint.plugins.bambu_printer.BambuPrinter")
+        self._mock_files = []  # Lokales Cache für Mock-Dateien
+
+    def delete_file(self, file_path: Path) -> None:
+        try:
+            with self.get_ftps_client() as ftp:
+                if ftp.delete_file(file_path.as_posix()):
+                    self._logger.debug(f"{file_path} deleted")
+                else:
+                    raise RuntimeError(f"Deleting file {file_path} failed")
+        except Exception as e:
+            self._logger.exception(e)
+
+    def list_files(
+        self,
+        folder: str,
+        extensions: str | list[str] | None,
+        ftp: IoTFTPSConnection,
+        existing_files=None,
+    ):
+        if existing_files is None:
+            existing_files = []
+
+        return list(
+            self.get_file_info_for_names(
+                ftp, ftp.list_files(folder, extensions), existing_files
+            )
+        )
+
+    def _get_ftp_file_info(
+        self,
+        ftp: IoTFTPSConnection,
+        file_path: Path,
+        existing_files: list[str] | None = None,
+    ):
+        file_size = ftp.get_file_size(file_path.as_posix())
+        date = ftp.get_file_date(file_path.as_posix())
+        file_name = file_path.name.lower()
+        dosname = get_dos_filename(file_name, existing_filenames=existing_files).lower()
+        return FileInfo(
+            dosname,
+            file_path,
+            file_size if file_size is not None else 0,
+            date,
+        )
+
+    def get_file_info_for_names(
+        self,
+        ftp: IoTFTPSConnection,
+        files: Iterable[Path],
+        existing_files: list[str] | None = None,
+    ) -> Iterator[FileInfo]:
+        if existing_files is None:
+            existing_files = []
+
+        for entry in files:
+            try:
+                file_info = self._get_ftp_file_info(ftp, entry, existing_files)
+                yield file_info
+                existing_files.append(file_info.file_name)
+                existing_files.append(file_info.dosname)
+            except Exception as e:
+                self._logger.exception(e, exc_info=False)
+
+    def get_ftps_client(self):
+        """
+        Implementieren wir eine Mock-Version des FTPS-Clients, die keinen echten FTP-Zugriff erfordert.
+        """
+        class MockFTPSClient:
+            def __enter__(self):
+                return self
+                
+            def __exit__(self, exc_type, exc_val, exc_tb):
+                pass
+                
+            def get_file_list(self, path=""):
+                """Gibt die Mock-Dateiliste zurück"""
+                return self._mock_files
+                
+        mock_client = MockFTPSClient()
+        mock_client._mock_files = self._mock_files
+        return mock_client
+        
+    @property
+    def is_available(self) -> bool:
+        """
+        Da wir kein FTP verwenden, ist dieser Service immer verfügbar
+        """
+        return True
+
+    def get_file_list(self, path: str) -> List[FileInfo]:
+        """
+        Gibt eine Liste von Dateien im angegebenen Pfad zurück.
+        Da wir kein FTP verwenden, geben wir eine leere Liste oder gespeicherte Mock-Dateien zurück.
+        """
+        self._logger.debug(f"Listing files in path: {path}")
+        return self._mock_files
+
+    def add_mock_file(self, file_info: FileInfo):
+        """
+        Fügt eine Mock-Datei zur Liste hinzu (für Tests oder wenn keine FTP-Verbindung möglich ist)
+        """
+        self._mock_files.append(file_info)
+        self._logger.debug(f"Added mock file: {file_info.file_name}")
+    
+    def clear_mock_files(self):
+        """Löscht alle gespeicherten Mock-Dateien"""
+        self._mock_files = []
+        self._logger.debug("Mock file list cleared")
+
+    def delete_file(self, path: str) -> bool:
+        """
+        Simuliert das Löschen einer Datei, entfernt sie aus der Mock-Liste
+        """
+        self._logger.debug(f"Deleting file: {path}")
+        before_count = len(self._mock_files)
+        self._mock_files = [f for f in self._mock_files if f.path != path]
+        return before_count > len(self._mock_files)

octoprint_bambu_printer/printer/gcode_executor.py

@@ -0,0 +1,319 @@
+import itertools
+import logging
+from inspect import signature
+import traceback
+
+
+GCODE_DOCUMENTATION = {
+    "G0": "Linear Move",
+    "G1": "Linear Move",
+    "G2": "Arc or Circle Move",
+    "G3": "Arc or Circle Move",
+    "G4": "Dwell",
+    "G5": "Bézier cubic spline",
+    "G6": "Direct Stepper Move",
+    "G10": "Retract",
+    "G11": "Recover",
+    "G12": "Clean the Nozzle",
+    "G17": "CNC Workspace Planes",
+    "G18": "CNC Workspace Planes",
+    "G19": "CNC Workspace Planes",
+    "G20": "Inch Units",
+    "G21": "Millimeter Units",
+    "G26": "Mesh Validation Pattern",
+    "G27": "Park toolhead",
+    "G28": "Auto Home",
+    "G29": "Bed Leveling",
+    "G29": "Bed Leveling (3-Point)",
+    "G29": "Bed Leveling (Linear)",
+    "G29": "Bed Leveling (Manual)",
+    "G29": "Bed Leveling (Bilinear)",
+    "G29": "Bed Leveling (Unified)",
+    "G30": "Single Z-Probe",
+    "G31": "Dock Sled",
+    "G32": "Undock Sled",
+    "G33": "Delta Auto Calibration",
+    "G34": "Z Steppers Auto-Alignment",
+    "G34": "Mechanical Gantry Calibration",
+    "G35": "Tramming Assistant",
+    "G38.2": "Probe target",
+    "G38.3": "Probe target",
+    "G38.4": "Probe target",
+    "G38.5": "Probe target",
+    "G42": "Move to mesh coordinate",
+    "G53": "Move in Machine Coordinates",
+    "G60": "Save Current Position",
+    "G61": "Return to Saved Position",
+    "G76": "Probe temperature calibration",
+    "G80": "Cancel Current Motion Mode",
+    "G90": "Absolute Positioning",
+    "G91": "Relative Positioning",
+    "G92": "Set Position",
+    "G425": "Backlash Calibration",
+    "M0": "Unconditional stop",
+    "M1": "Unconditional stop",
+    "M3": "Spindle CW / Laser On",
+    "M4": "Spindle CCW / Laser On",
+    "M5": "Spindle / Laser Off",
+    "M7": "Coolant Controls",
+    "M8": "Coolant Controls",
+    "M9": "Coolant Controls",
+    "M10": "Vacuum / Blower Control",
+    "M11": "Vacuum / Blower Control",
+    "M16": "Expected Printer Check",
+    "M17": "Enable Steppers",
+    "M18": "Disable steppers",
+    "M84": "Disable steppers",
+    "M20": "List SD Card",
+    "M21": "Init SD card",
+    "M22": "Release SD card",
+    "M23": "Select SD file",
+    "M24": "Start or Resume SD print",
+    "M25": "Pause SD print",
+    "M26": "Set SD position",
+    "M27": "Report SD print status",
+    "M28": "Start SD write",
+    "M29": "Stop SD write",
+    "M30": "Delete SD file",
+    "M31": "Print time",
+    "M32": "Select and Start",
+    "M33": "Get Long Path",
+    "M34": "SDCard Sorting",
+    "M42": "Set Pin State",
+    "M43": "Debug Pins",
+    "M48": "Probe Repeatability Test",
+    "M73": "Set Print Progress",
+    "M75": "Start Print Job Timer",
+    "M76": "Pause Print Job Timer",
+    "M77": "Stop Print Job Timer",
+    "M78": "Print Job Stats",
+    "M80": "Power On",
+    "M81": "Power Off",
+    "M82": "E Absolute",
+    "M83": "E Relative",
+    "M85": "Inactivity Shutdown",
+    "M86": "Hotend Idle Timeout",
+    "M87": "Disable Hotend Idle Timeout",
+    "M92": "Set Axis Steps-per-unit",
+    "M100": "Free Memory",
+    "M102": "Configure Bed Distance Sensor",
+    "M104": "Set Hotend Temperature",
+    "M105": "Report Temperatures",
+    "M106": "Set Fan Speed",
+    "M107": "Fan Off",
+    "M108": "Break and Continue",
+    "M109": "Wait for Hotend Temperature",
+    "M110": "Set / Get Line Number",
+    "M111": "Debug Level",
+    "M112": "Full Shutdown",
+    "M113": "Host Keepalive",
+    "M114": "Get Current Position",
+    "M115": "Firmware Info",
+    "M117": "Set LCD Message",
+    "M118": "Serial print",
+    "M119": "Endstop States",
+    "M120": "Enable Endstops",
+    "M121": "Disable Endstops",
+    "M122": "TMC Debugging",
+    "M123": "Fan Tachometers",
+    "M125": "Park Head",
+    "M126": "Baricuda 1 Open",
+    "M127": "Baricuda 1 Close",
+    "M128": "Baricuda 2 Open",
+    "M129": "Baricuda 2 Close",
+    "M140": "Set Bed Temperature",
+    "M141": "Set Chamber Temperature",
+    "M143": "Set Laser Cooler Temperature",
+    "M145": "Set Material Preset",
+    "M149": "Set Temperature Units",
+    "M150": "Set RGB(W) Color",
+    "M154": "Position Auto-Report",
+    "M155": "Temperature Auto-Report",
+    "M163": "Set Mix Factor",
+    "M164": "Save Mix",
+    "M165": "Set Mix",
+    "M166": "Gradient Mix",
+    "M190": "Wait for Bed Temperature",
+    "M191": "Wait for Chamber Temperature",
+    "M192": "Wait for Probe temperature",
+    "M193": "Set Laser Cooler Temperature",
+    "M200": "Set Filament Diameter",
+    "M201": "Print / Travel Move Limits",
+    "M203": "Set Max Feedrate",
+    "M204": "Set Starting Acceleration",
+    "M205": "Set Advanced Settings",
+    "M206": "Set Home Offsets",
+    "M207": "Set Firmware Retraction",
+    "M208": "Firmware Recover",
+    "M209": "Set Auto Retract",
+    "M211": "Software Endstops",
+    "M217": "Filament swap parameters",
+    "M218": "Set Hotend Offset",
+    "M220": "Set Feedrate Percentage",
+    "M221": "Set Flow Percentage",
+    "M226": "Wait for Pin State",
+    "M240": "Trigger Camera",
+    "M250": "LCD Contrast",
+    "M255": "LCD Sleep/Backlight Timeout",
+    "M256": "LCD Brightness",
+    "M260": "I2C Send",
+    "M261": "I2C Request",
+    "M280": "Servo Position",
+    "M281": "Edit Servo Angles",
+    "M282": "Detach Servo",
+    "M290": "Babystep",
+    "M300": "Play Tone",
+    "M301": "Set Hotend PID",
+    "M302": "Cold Extrude",
+    "M303": "PID autotune",
+    "M304": "Set Bed PID",
+    "M305": "User Thermistor Parameters",
+    "M306": "Model Predictive Temp. Control",
+    "M350": "Set micro-stepping",
+    "M351": "Set Microstep Pins",
+    "M355": "Case Light Control",
+    "M360": "SCARA Theta A",
+    "M361": "SCARA Theta-B",
+    "M362": "SCARA Psi-A",
+    "M363": "SCARA Psi-B",
+    "M364": "SCARA Psi-C",
+    "M380": "Activate Solenoid",
+    "M381": "Deactivate Solenoids",
+    "M400": "Finish Moves",
+    "M401": "Deploy Probe",
+    "M402": "Stow Probe",
+    "M403": "MMU2 Filament Type",
+    "M404": "Set Filament Diameter",
+    "M405": "Filament Width Sensor On",
+    "M406": "Filament Width Sensor Off",
+    "M407": "Filament Width",
+    "M410": "Quickstop",
+    "M412": "Filament Runout",
+    "M413": "Power-loss Recovery",
+    "M420": "Bed Leveling State",
+    "M421": "Set Mesh Value",
+    "M422": "Set Z Motor XY",
+    "M423": "X Twist Compensation",
+    "M425": "Backlash compensation",
+    "M428": "Home Offsets Here",
+    "M430": "Power Monitor",
+    "M486": "Cancel Objects",
+    "M493": "Fixed-Time Motion",
+    "M500": "Save Settings",
+    "M501": "Restore Settings",
+    "M502": "Factory Reset",
+    "M503": "Report Settings",
+    "M504": "Validate EEPROM contents",
+    "M510": "Lock Machine",
+    "M511": "Unlock Machine",
+    "M512": "Set Passcode",
+    "M524": "Abort SD print",
+    "M540": "Endstops Abort SD",
+    "M569": "Set TMC stepping mode",
+    "M575": "Serial baud rate",
+    "M592": "Nonlinear Extrusion Control",
+    "M593": "ZV Input Shaping",
+    "M600": "Filament Change",
+    "M603": "Configure Filament Change",
+    "M605": "Multi Nozzle Mode",
+    "M665": "Delta Configuration",
+    "M665": "SCARA Configuration",
+    "M666": "Set Delta endstop adjustments",
+    "M666": "Set dual endstop offsets",
+    "M672": "Duet Smart Effector sensitivity",
+    "M701": "Load filament",
+    "M702": "Unload filament",
+    "M710": "Controller Fan settings",
+    "M808": "Repeat Marker",
+    "M851": "XYZ Probe Offset",
+    "M852": "Bed Skew Compensation",
+    "M871": "Probe temperature config",
+    "M876": "Handle Prompt Response",
+    "M900": "Linear Advance Factor",
+    "M906": "Stepper Motor Current",
+    "M907": "Set Motor Current",
+    "M908": "Set Trimpot Pins",
+    "M909": "DAC Print Values",
+    "M910": "Commit DAC to EEPROM",
+    "M911": "TMC OT Pre-Warn Condition",
+    "M912": "Clear TMC OT Pre-Warn",
+    "M913": "Set Hybrid Threshold Speed",
+    "M914": "TMC Bump Sensitivity",
+    "M915": "TMC Z axis calibration",
+    "M916": "L6474 Thermal Warning Test",
+    "M917": "L6474 Overcurrent Warning Test",
+    "M918": "L6474 Speed Warning Test",
+    "M919": "TMC Chopper Timing",
+    "M928": "Start SD Logging",
+    "M951": "Magnetic Parking Extruder",
+    "M993": "Back up flash settings to SD",
+    "M994": "Restore flash from SD",
+    "M995": "Touch Screen Calibration",
+    "M997": "Firmware update",
+    "M999": "STOP Restart",
+    "M7219": "MAX7219 Control",
+}
+
+
+class GCodeExecutor:
+    def __init__(self):
+        self._log = logging.getLogger(
+            "octoprint.plugins.bambu_printer.BambuPrinter.gcode_executor"
+        )
+        self.handler_names = set()
+        self.gcode_handlers = {}
+        self.gcode_handlers_no_data = {}
+
+    def __contains__(self, item):
+        return item in self.gcode_handlers or item in self.gcode_handlers_no_data
+
+    def _get_required_args_count(self, func):
+        sig = signature(func)
+        required_count = sum(
+            1
+            for p in sig.parameters.values()
+            if (p.kind == p.POSITIONAL_OR_KEYWORD or p.kind == p.POSITIONAL_ONLY)
+            and p.default == p.empty
+        )
+        return required_count
+
+    def register(self, gcode):
+        def decorator(func):
+            required_count = self._get_required_args_count(func)
+            if required_count == 1:
+                self.gcode_handlers_no_data[gcode] = func
+            elif required_count == 2:
+                self.gcode_handlers[gcode] = func
+            else:
+                raise ValueError(
+                    f"Cannot register function with {required_count} required parameters"
+                )
+            return func
+
+        return decorator
+
+    def register_no_data(self, gcode):
+        def decorator(func):
+            self.gcode_handlers_no_data[gcode] = func
+            return func
+
+        return decorator
+
+    def execute(self, printer, gcode, data):
+        gcode_info = self._gcode_with_info(gcode)
+        try:
+            if gcode in self.gcode_handlers:
+                self._log.debug(f"Executing {gcode_info}")
+                return self.gcode_handlers[gcode](printer, data)
+            elif gcode in self.gcode_handlers_no_data:
+                self._log.debug(f"Executing {gcode_info}")
+                return self.gcode_handlers_no_data[gcode](printer)
+            else:
+                self._log.debug(f"ignoring {gcode_info} command.")
+                return False
+        except Exception as e:
+            self._log.error(f"Error during gcode {gcode_info}")
+            raise
+
+    def _gcode_with_info(self, gcode):
+        return f"{gcode} ({GCODE_DOCUMENTATION.get(gcode, 'Info not specified')})"

octoprint_bambu_printer/printer/print_job.py

@@ -0,0 +1,18 @@
+from __future__ import annotations
+
+from dataclasses import dataclass
+from octoprint_bambu_printer.printer.file_system.remote_sd_card_file_list import (
+    FileInfo,
+)
+
+
+@dataclass
+class PrintJob:
+    file_info: FileInfo
+    progress: int
+
+    @property
+    def file_position(self):
+        if self.file_info.size is None:
+            return 0
+        return int(self.file_info.size * self.progress / 100)

octoprint_bambu_printer/printer/printer_serial_io.py

@@ -0,0 +1,257 @@
+from __future__ import annotations
+
+from io import BufferedIOBase
+import logging
+import queue
+import re
+import threading
+import traceback
+from types import TracebackType
+from typing import Callable
+
+from octoprint.util import to_bytes, to_unicode
+from serial import SerialTimeoutException
+
+
+class PrinterSerialIO(threading.Thread, BufferedIOBase):
+    command_regex = re.compile(r"^([GM])(\d+)")
+
+    def __init__(
+        self,
+        handle_command_callback: Callable[[str, str], None],
+        settings,
+        serial_log_handler=None,
+        read_timeout=5.0,
+        write_timeout=10.0,
+    ) -> None:
+        super().__init__(
+            name="octoprint.plugins.bambu_printer.printer_worker", daemon=True
+        )
+        self._handle_command_callback = handle_command_callback
+        self._settings = settings
+        self._log = self._init_logger(serial_log_handler)
+
+        self._read_timeout = read_timeout
+        self._write_timeout = write_timeout
+
+        self.current_line = 0
+        self._received_lines = 0
+        self._wait_interval = 5.0
+        self._running = True
+
+        self._rx_buffer_size = 64
+        self._incoming_lock = threading.RLock()
+
+        self.input_bytes = queue.Queue(self._rx_buffer_size)
+        self.output_bytes = queue.Queue()
+        self._error_detected: Exception | None = None
+
+    def _init_logger(self, log_handler):
+        log = logging.getLogger("octoprint.plugins.bambu_printer.BambuPrinter.serial")
+        if log_handler is not None:
+            log.addHandler(log_handler)
+        log.debug("-" * 78)
+        return log
+
+    @property
+    def incoming_lock(self):
+        return self._incoming_lock
+
+    def run(self) -> None:
+        buffer = b""
+
+        while self._running:
+            try:
+                data = self.input_bytes.get(block=True, timeout=0.01)
+                data = to_bytes(data, encoding="ascii", errors="replace")
+
+                buffer += data
+                line, buffer = self._read_next_line(buffer)
+                while line is not None:
+                    self._received_lines += 1
+                    self._process_input_gcode_line(line)
+                    line, buffer = self._read_next_line(buffer)
+                self.input_bytes.task_done()
+            except queue.Empty:
+                continue
+            except Exception as e:
+                self._error_detected = e
+                self.input_bytes.task_done()
+                self._clearQueue(self.input_bytes)
+                self._log.info(
+                    "\n".join(traceback.format_exception_only(type(e), e)[-50:])
+                )
+                self._running = False
+
+        self._log.debug("Closing IO read loop")
+
+    def _read_next_line(self, buffer: bytes):
+        new_line_pos = buffer.find(b"\n") + 1
+        if new_line_pos > 0:
+            line = buffer[:new_line_pos]
+            buffer = buffer[new_line_pos:]
+            return line, buffer
+        else:
+            return None, buffer
+
+    def close(self):
+        self.flush()
+        self._running = False
+        self.join()
+
+    def flush(self):
+        self.input_bytes.join()
+        self.raise_if_error()
+
+    def raise_if_error(self):
+        if self._error_detected is not None:
+            raise self._error_detected
+
+    def write(self, data: bytes) -> int:
+        data = to_bytes(data, errors="replace")
+        u_data = to_unicode(data, errors="replace")
+
+        with self._incoming_lock:
+            if self.is_closed():
+                return 0
+
+            try:
+                self._log.debug(f"<<< {u_data}")
+                self.input_bytes.put(data, timeout=self._write_timeout)
+                return len(data)
+            except queue.Full:
+                self._log.error(
+                    "Incoming queue is full, raising SerialTimeoutException"
+                )
+                raise SerialTimeoutException()
+
+    def readline(self) -> bytes:
+        try:
+            # fetch a line from the queue, wait no longer than timeout
+            line = to_unicode(
+                self.output_bytes.get(timeout=self._read_timeout), errors="replace"
+            )
+            self._log.debug(f">>> {line.strip()}")
+            self.output_bytes.task_done()
+            return to_bytes(line)
+        except queue.Empty:
+            # queue empty? return empty line
+            return b""
+
+    def readlines(self):
+        result = []
+        next_line = self.readline()
+        while next_line != b"":
+            result.append(next_line)
+            next_line = self.readline()
+        return result
+
+    def send(self, line: str) -> None:
+        if self.output_bytes is not None:
+            self.output_bytes.put(line)
+
+    def sendOk(self):
+        self.send("ok")
+
+    def reset(self):
+        self._clearQueue(self.input_bytes)
+        self._clearQueue(self.output_bytes)
+
+    def is_closed(self):
+        return not self._running
+
+    def _process_input_gcode_line(self, data: bytes):
+        if b"*" in data:
+            checksum = int(data[data.rfind(b"*") + 1 :])
+            data = data[: data.rfind(b"*")]
+            if not checksum == self._calculate_checksum(data):
+                self._triggerResend(expected=self.current_line + 1)
+                return
+
+            self.current_line += 1
+        elif self._settings.get_boolean(["forceChecksum"]):
+            self.send(self._format_error("checksum_missing"))
+            return
+
+        line = self._process_linenumber_marker(data)
+        if line is None:
+            return
+
+        command = to_unicode(line, encoding="ascii", errors="replace").strip()
+        command_match = self.command_regex.match(command)
+        if command_match is not None:
+            gcode = command_match.group(0)
+            self._handle_command_callback(gcode, command)
+        else:
+            self._log.warn(f'Not a valid gcode command "{command}"')
+
+    def _process_linenumber_marker(self, data: bytes):
+        linenumber = 0
+        if data.startswith(b"N") and b"M110" in data:
+            linenumber = int(re.search(b"N([0-9]+)", data).group(1))
+            self.lastN = linenumber
+            self.current_line = linenumber
+            self.sendOk()
+            return None
+        elif data.startswith(b"N"):
+            linenumber = int(re.search(b"N([0-9]+)", data).group(1))
+            expected = self.lastN + 1
+            if linenumber != expected:
+                self._triggerResend(actual=linenumber)
+                return None
+            else:
+                self.lastN = linenumber
+            data = data.split(None, 1)[1].strip()
+        return data
+
+    def _triggerResend(
+        self,
+        expected: int | None = None,
+        actual: int | None = None,
+        checksum: int | None = None,
+    ) -> None:
+        with self._incoming_lock:
+            if expected is None:
+                expected = self.lastN + 1
+            else:
+                self.lastN = expected - 1
+
+            if actual is None:
+                if checksum:
+                    self.send(self._format_error("checksum_mismatch"))
+                else:
+                    self.send(self._format_error("checksum_missing"))
+            else:
+                self.send(self._format_error("lineno_mismatch", expected, actual))
+
+            def request_resend():
+                self.send("Resend:%d" % expected)
+                self.sendOk()
+
+            request_resend()
+
+    def _calculate_checksum(self, line: bytes) -> int:
+        checksum = 0
+        for c in bytearray(line):
+            checksum ^= c
+        return checksum
+
+    def _format_error(self, error: str, *args, **kwargs) -> str:
+        errors = {
+            "checksum_mismatch": "Checksum mismatch",
+            "checksum_missing": "Missing checksum",
+            "lineno_mismatch": "expected line {} got {}",
+            "lineno_missing": "No Line Number with checksum, Last Line: {}",
+            "maxtemp": "MAXTEMP triggered!",
+            "mintemp": "MINTEMP triggered!",
+            "command_unknown": "Unknown command {}",
+        }
+        return f"Error: {errors.get(error).format(*args, **kwargs)}"
+
+    def _clearQueue(self, q: queue.Queue):
+        try:
+            while q.get(block=False):
+                q.task_done()
+                continue
+        except queue.Empty:
+            pass

octoprint_bambu_printer/printer/states/a_printer_state.py

@@ -0,0 +1,46 @@
+from __future__ import annotations
+
+import logging
+from typing import TYPE_CHECKING
+
+if TYPE_CHECKING:
+    from octoprint_bambu_printer.printer.bambu_virtual_printer import (
+        BambuVirtualPrinter,
+    )
+
+
+class APrinterState:
+    def __init__(self, printer: BambuVirtualPrinter) -> None:
+        self._log = logging.getLogger(
+            "octoprint.plugins.bambu_printer.BambuPrinter.states"
+        )
+        self._printer = printer
+
+    def init(self):
+        pass
+
+    def finalize(self):
+        pass
+
+    def handle_gcode(self, gcode):
+        self._log.debug(f"{self.__class__.__name__} gcode execution disabled")
+
+    def update_print_job_info(self):
+        self._log_skip_state_transition("start_new_print")
+
+    def start_new_print(self):
+        self._log_skip_state_transition("start_new_print")
+
+    def pause_print(self):
+        self._log_skip_state_transition("pause_print")
+
+    def cancel_print(self):
+        self._log_skip_state_transition("cancel_print")
+
+    def resume_print(self):
+        self._log_skip_state_transition("resume_print")
+
+    def _log_skip_state_transition(self, method):
+        self._log.debug(
+            f"skipping {self.__class__.__name__} state transition for '{method}'"
+        )

octoprint_bambu_printer/printer/states/idle_state.py

@@ -0,0 +1,56 @@
+from __future__ import annotations
+
+from octoprint_bambu_printer.printer.file_system.file_info import FileInfo
+from octoprint_bambu_printer.printer.states.a_printer_state import APrinterState
+
+
+class IdleState(APrinterState):
+
+    def start_new_print(self):
+        selected_file = self._printer.selected_file
+        if selected_file is None:
+            self._log.warn("Cannot start print job if file was not selected")
+            return
+
+        print_command = self._get_print_command_for_file(selected_file)
+        self._log.debug(f"Sending print command: {print_command}")
+        if self._printer.bambu_client.publish(print_command):
+            self._log.info(f"Started print for {selected_file.file_name}")
+        else:
+            self._log.warn(f"Failed to start print for {selected_file.file_name}")
+
+    def _get_print_command_for_file(self, selected_file: FileInfo):
+
+        # URL to print. Root path, protocol can vary. E.g., if sd card, "ftp:///myfile.3mf", "ftp:///cache/myotherfile.3mf"
+        filesystem_root = (
+            "file:///mnt/sdcard/"
+            if self._printer._settings.get(["device_type"]) in ["X1", "X1C"]
+            else "file:///"
+        )
+
+        print_command = {
+            "print": {
+                "sequence_id": 0,
+                "command": "project_file",
+                "param": "Metadata/plate_1.gcode",
+                "md5": "",
+                "profile_id": "0",
+                "project_id": "0",
+                "subtask_id": "0",
+                "task_id": "0",
+                "subtask_name": selected_file.file_name,
+                "url": f"{filesystem_root}{selected_file.path.as_posix()}",
+                "bed_type": "auto",
+                "timelapse": self._printer._settings.get_boolean(["timelapse"]),
+                "bed_leveling": self._printer._settings.get_boolean(["bed_leveling"]),
+                "flow_cali": self._printer._settings.get_boolean(["flow_cali"]),
+                "vibration_cali": self._printer._settings.get_boolean(
+                    ["vibration_cali"]
+                ),
+                "layer_inspect": self._printer._settings.get_boolean(["layer_inspect"]),
+                "use_ams": self._printer._settings.get_boolean(["use_ams"]),
+                "ams_mapping": "",
+            }
+        }
+
+        return print_command

octoprint_bambu_printer/printer/states/paused_state.py

@@ -0,0 +1,51 @@
+from __future__ import annotations
+from typing import TYPE_CHECKING
+
+if TYPE_CHECKING:
+    from octoprint_bambu_printer.printer.bambu_virtual_printer import (
+        BambuVirtualPrinter,
+    )
+
+import threading
+
+import pybambu.commands
+from octoprint.util import RepeatedTimer
+
+from octoprint_bambu_printer.printer.states.a_printer_state import APrinterState
+
+
+class PausedState(APrinterState):
+
+    def __init__(self, printer: BambuVirtualPrinter) -> None:
+        super().__init__(printer)
+        self._pausedLock = threading.Event()
+        self._paused_repeated_report = None
+
+    def init(self):
+        if not self._pausedLock.is_set():
+            self._pausedLock.set()
+
+        self._printer.sendIO("// action:paused")
+        self._printer.start_continuous_status_report(3)
+
+    def finalize(self):
+        if self._pausedLock.is_set():
+            self._pausedLock.clear()
+            if self._paused_repeated_report is not None:
+                self._paused_repeated_report.join()
+                self._paused_repeated_report = None
+
+    def start_new_print(self):
+        if self._printer.bambu_client.connected:
+            if self._printer.bambu_client.publish(pybambu.commands.RESUME):
+                self._log.info("print resumed")
+            else:
+                self._log.info("print resume failed")
+
+    def cancel_print(self):
+        if self._printer.bambu_client.connected:
+            if self._printer.bambu_client.publish(pybambu.commands.STOP):
+                self._log.info("print cancelled")
+                self._printer.finalize_print_job()
+            else:
+                self._log.info("print cancel failed")

octoprint_bambu_printer/printer/states/printing_state.py

@@ -0,0 +1,94 @@
+from __future__ import annotations
+
+import time
+from typing import TYPE_CHECKING
+
+if TYPE_CHECKING:
+    from octoprint_bambu_printer.printer.bambu_virtual_printer import (
+        BambuVirtualPrinter,
+    )
+
+import threading
+
+import pybambu
+import pybambu.models
+import pybambu.commands
+
+from octoprint_bambu_printer.printer.print_job import PrintJob
+from octoprint_bambu_printer.printer.states.a_printer_state import APrinterState
+
+
+class PrintingState(APrinterState):
+
+    def __init__(self, printer: BambuVirtualPrinter) -> None:
+        super().__init__(printer)
+        self._current_print_job = None
+        self._is_printing = False
+        self._sd_printing_thread = None
+
+    def init(self):
+        self._is_printing = True
+        self._printer.remove_project_selection()
+        self.update_print_job_info()
+        self._start_worker_thread()
+
+    def finalize(self):
+        if self._sd_printing_thread is not None and self._sd_printing_thread.is_alive():
+            self._is_printing = False
+            self._sd_printing_thread.join()
+            self._sd_printing_thread = None
+        self._printer.current_print_job = None
+
+    def _start_worker_thread(self):
+        if self._sd_printing_thread is None:
+            self._is_printing = True
+            self._sd_printing_thread = threading.Thread(target=self._printing_worker)
+            self._sd_printing_thread.start()
+
+    def _printing_worker(self):
+        while (
+            self._is_printing
+            and self._printer.current_print_job is not None
+            and self._printer.current_print_job.progress < 100
+        ):
+            self.update_print_job_info()
+            self._printer.report_print_job_status()
+            time.sleep(3)
+
+        self.update_print_job_info()
+        if (
+            self._printer.current_print_job is not None
+            and self._printer.current_print_job.progress >= 100
+        ):
+            self._printer.finalize_print_job()
+
+    def update_print_job_info(self):
+        print_job_info = self._printer.bambu_client.get_device().print_job
+        task_name: str = print_job_info.subtask_name
+        project_file_info = self._printer.project_files.get_file_by_stem(
+            task_name, [".gcode", ".3mf"]
+        )
+        if project_file_info is None:
+            self._log.debug(f"No 3mf file found for {print_job_info}")
+            self._current_print_job = None
+            self._printer.change_state(self._printer._state_idle)
+            return
+
+        progress = print_job_info.print_percentage
+        self._printer.current_print_job = PrintJob(project_file_info, progress)
+        self._printer.select_project_file(project_file_info.path.as_posix())
+
+    def pause_print(self):
+        if self._printer.bambu_client.connected:
+            if self._printer.bambu_client.publish(pybambu.commands.PAUSE):
+                self._log.info("print paused")
+            else:
+                self._log.info("print pause failed")
+
+    def cancel_print(self):
+        if self._printer.bambu_client.connected:
+            if self._printer.bambu_client.publish(pybambu.commands.STOP):
+                self._log.info("print cancelled")
+                self._printer.finalize_print_job()
+            else:
+                self._log.info("print cancel failed")

requirements.txt

@@ -7,3 +7,11 @@
 ###
 
 .
+
+pytest~=7.4.4
+pybambu~=1.0.1
+OctoPrint~=1.10.2
+setuptools~=70.0.0
+pyserial~=3.5
+Flask~=2.2.5
+paho-mqtt~=2.1.0

setup.py

@@ -14,20 +14,20 @@ plugin_package = "octoprint_bambu_printer"
 plugin_name = "OctoPrint-BambuPrinter"
 
 # The plugin's version. Can be overwritten within OctoPrint's internal data via __plugin_version__ in the plugin module
-plugin_version = "0.0.23"
+plugin_version = "1.0.0"
 
 # The plugin's description. Can be overwritten within OctoPrint's internal data via __plugin_description__ in the plugin
 # module
 plugin_description = """Connects OctoPrint to BambuLabs printers."""
 
 # The plugin's author. Can be overwritten within OctoPrint's internal data via __plugin_author__ in the plugin module
-plugin_author = "jneilliii"
+plugin_author = "ManuelW"
 
 # The plugin's author's mail address.
-plugin_author_email = "jneilliii+github@gmail.com"
+plugin_author_email = "manuelw@example.com"
 
 # The plugin's homepage URL. Can be overwritten within OctoPrint's internal data via __plugin_url__ in the plugin module
-plugin_url = "https://github.com/jneilliii/OctoPrint-BambuPrinter"
+plugin_url = "https://gitlab.fire-devils.org/3D-Druck/OctoPrint-BambuPrinter"
 
 # The plugin's license. Can be overwritten within OctoPrint's internal data via __plugin_license__ in the plugin module
 plugin_license = "AGPLv3"

templates/bambu_printer_settings.jinja2

@@ -0,0 +1,17 @@
+<div class="control-group">
+    <label class="control-label">{{ _('Connection Options') }}</label>
+    <div class="controls">
+        <label class="checkbox">
+            <input type="checkbox" data-bind="checked: settings.plugins.bambu_printer.use_mqtt_bridge"> {{ _('Use MQTT Bridge') }}
+            <span class="help-block">
+                {{ _('Connect via a MQTT broker that bridges communications from the printer. Useful for connecting to a printer on a different network.') }}
+            </span>
+        </label>
+        <label class="checkbox">
+            <input type="checkbox" data-bind="checked: settings.plugins.bambu_printer.disable_camera"> {{ _('Disable Camera Functionality') }}
+            <span class="help-block">
+                {{ _('Disable camera streaming and image capture to avoid connection errors. Enable this if you see frequent connection refused errors in the logs.') }}
+            </span>
+        </label>
+    </div>
+</div>

test/conftest.py

@@ -0,0 +1,9 @@
+from pathlib import Path
+from pytest import fixture
+
+
+@fixture
+def output_folder():
+    folder = Path(__file__).parent / "test_output"
+    folder.mkdir(parents=True, exist_ok=True)
+    return folder

test/test_data_conversions.py

@@ -0,0 +1,30 @@
+from __future__ import annotations
+from datetime import datetime
+from pathlib import Path
+
+from octoprint.util import get_formatted_size, get_formatted_datetime
+from octoprint_bambu_printer.printer.file_system.bambu_timelapse_file_info import (
+    BambuTimelapseFileInfo,
+)
+from octoprint_bambu_printer.printer.file_system.file_info import FileInfo
+
+
+def test_timelapse_info_valid():
+    file_name = "part.mp4"
+    file_size = 1000
+    file_date = datetime(2020, 1, 1)
+    file_timestamp = file_date.timestamp()
+
+    file_info = FileInfo(file_name, Path(file_name), file_size, file_date)
+    timelapse = BambuTimelapseFileInfo.from_file_info(file_info)
+
+    assert timelapse.to_dict() == {
+        "bytes": file_size,
+        "date": get_formatted_datetime(datetime.fromtimestamp(file_timestamp)),
+        "name": file_name,
+        "size": get_formatted_size(file_size),
+        "thumbnail": "/plugin/bambu_printer/thumbnail/"
+        + file_name.replace(".mp4", ".jpg").replace(".avi", ".jpg"),
+        "timestamp": file_timestamp,
+        "url": f"/plugin/bambu_printer/timelapse/{file_name}",
+    }

test/test_gcode_execution.py

@@ -0,0 +1,562 @@
+from __future__ import annotations
+from datetime import datetime, timezone
+import logging
+from pathlib import Path
+import sys
+from typing import Any
+from unittest.mock import MagicMock, patch
+
+from octoprint_bambu_printer.printer.file_system.cached_file_view import CachedFileView
+import pybambu
+import pybambu.commands
+from octoprint_bambu_printer.printer.bambu_virtual_printer import BambuVirtualPrinter
+from octoprint_bambu_printer.printer.file_system.file_info import FileInfo
+from octoprint_bambu_printer.printer.file_system.ftps_client import IoTFTPSClient
+from octoprint_bambu_printer.printer.file_system.remote_sd_card_file_list import (
+    RemoteSDCardFileList,
+)
+from octoprint_bambu_printer.printer.states.idle_state import IdleState
+from octoprint_bambu_printer.printer.states.paused_state import PausedState
+from octoprint_bambu_printer.printer.states.printing_state import PrintingState
+from pytest import fixture
+
+
+@fixture
+def output_test_folder(output_folder: Path):
+    folder = output_folder / "test_gcode"
+    folder.mkdir(parents=True, exist_ok=True)
+    return folder
+
+
+@fixture
+def log_test():
+    log = logging.getLogger("gcode_unittest")
+    log.setLevel(logging.DEBUG)
+    return log
+
+
+class DictGetter:
+    def __init__(self, options: dict, default_value=None) -> None:
+        self.options: dict[str | tuple[str, ...], Any] = options
+        self._default_value = default_value
+
+    def __call__(self, key: str | list[str] | tuple[str, ...]):
+        if isinstance(key, list):
+            key = tuple(key)
+        return self.options.get(key, self._default_value)
+
+
+@fixture
+def settings(output_test_folder):
+    _settings = MagicMock()
+    _settings.get.side_effect = DictGetter(
+        {
+            "serial": "BAMBU",
+            "host": "localhost",
+            "access_code": "12345",
+        }
+    )
+    _settings.get_boolean.side_effect = DictGetter({"forceChecksum": False})
+
+    log_file_path = output_test_folder / "log.txt"
+    log_file_path.touch()
+    _settings.get_plugin_logfile_path.return_value = log_file_path.as_posix()
+    return _settings
+
+
+@fixture
+def profile_manager():
+    _profile_manager = MagicMock()
+    _profile_manager.get_current.side_effect = MagicMock()
+    _profile_manager.get_current().get.side_effect = DictGetter(
+        {
+            "heatedChamber": False,
+        }
+    )
+    return _profile_manager
+
+
+def _ftp_date_format(dt: datetime):
+    return dt.replace(tzinfo=timezone.utc).strftime("%Y%m%d%H%M%S")
+
+
+@fixture
+def project_files_info_ftp():
+    return {
+        "print.3mf": (1000, _ftp_date_format(datetime(2024, 5, 6))),
+        "print2.3mf": (1200, _ftp_date_format(datetime(2024, 5, 7))),
+    }
+
+
+@fixture
+def cache_files_info_ftp():
+    return {
+        "cache/print.3mf": (1200, _ftp_date_format(datetime(2024, 5, 7))),
+        "cache/print3.gcode.3mf": (1200, _ftp_date_format(datetime(2024, 5, 7))),
+        "cache/long file path with spaces.gcode.3mf": (
+            1200,
+            _ftp_date_format(datetime(2024, 5, 7)),
+        ),
+    }
+
+
+@fixture
+def ftps_session_mock(project_files_info_ftp, cache_files_info_ftp):
+    all_file_info = dict(**project_files_info_ftp, **cache_files_info_ftp)
+    ftps_session = MagicMock()
+    ftps_session.size.side_effect = DictGetter(
+        {file: info[0] for file, info in all_file_info.items()}
+    )
+
+    ftps_session.sendcmd.side_effect = DictGetter(
+        {f"MDTM {file}": info[1] for file, info in all_file_info.items()}
+    )
+
+    ftps_session.nlst.side_effect = DictGetter(
+        {
+            "": list(map(lambda p: Path(p).name, project_files_info_ftp))
+            + ["Mock folder"],
+            "cache/": list(map(lambda p: Path(p).name, cache_files_info_ftp))
+            + ["Mock folder"],
+            "timelapse/": ["video.mp4", "video.avi"],
+        }
+    )
+    IoTFTPSClient.open_ftps_session = MagicMock(return_value=ftps_session)
+    yield ftps_session
+
+
+@fixture(scope="function")
+def print_job_mock():
+    print_job = MagicMock()
+    print_job.subtask_name = ""
+    print_job.print_percentage = 0
+    return print_job
+
+
+@fixture(scope="function")
+def temperatures_mock():
+    temperatures = MagicMock()
+    temperatures.nozzle_temp = 0
+    temperatures.target_nozzle_temp = 0
+    temperatures.bed_temp = 0
+    temperatures.target_bed_temp = 0
+    temperatures.chamber_temp = 0
+    return temperatures
+
+
+@fixture(scope="function")
+def bambu_client_mock(print_job_mock, temperatures_mock) -> pybambu.BambuClient:
+    bambu_client = MagicMock()
+    bambu_client.connected = True
+    device_mock = MagicMock()
+    device_mock.print_job = print_job_mock
+    device_mock.temperatures = temperatures_mock
+    bambu_client.get_device.return_value = device_mock
+    return bambu_client
+
+
+@fixture(scope="function")
+def printer(
+    output_test_folder,
+    settings,
+    profile_manager,
+    log_test,
+    ftps_session_mock,
+    bambu_client_mock,
+):
+    async def _mock_connection(self):
+        pass
+
+    BambuVirtualPrinter._create_client_connection_async = _mock_connection
+    printer_test = BambuVirtualPrinter(
+        settings,
+        profile_manager,
+        data_folder=output_test_folder,
+        serial_log_handler=log_test,
+        read_timeout=0.01,
+        faked_baudrate=115200,
+    )
+    printer_test._bambu_client = bambu_client_mock
+    printer_test.flush()
+    printer_test.readlines()
+    yield printer_test
+    printer_test.close()
+
+
+def test_initial_state(printer: BambuVirtualPrinter):
+    assert isinstance(printer.current_state, IdleState)
+
+
+def test_list_sd_card(printer: BambuVirtualPrinter):
+    printer.write(b"M20\n")  # GCode for listing SD card
+    printer.flush()
+    result = printer.readlines()
+    assert result[0] == b"Begin file list"
+    assert result[1].endswith(b'"print.3mf"')
+    assert result[2].endswith(b'"print2.3mf"')
+    assert result[3].endswith(b'"print.3mf"')
+    assert result[4].endswith(b'"print3.gcode.3mf"')
+    assert result[-3] == b"End file list"
+    assert result[-2] == b"ok"
+    assert result[-1] == b"ok"
+
+
+def test_list_ftp_paths_p1s(settings, ftps_session_mock):
+    file_system = RemoteSDCardFileList(settings)
+    file_view = CachedFileView(file_system).with_filter("timelapse/", ".avi")
+
+    timelapse_files = ["timelapse/video.avi", "timelapse/video2.avi"]
+    ftps_session_mock.size.side_effect = DictGetter(
+        {file: 100 for file in timelapse_files}
+    )
+    ftps_session_mock.sendcmd.side_effect = DictGetter(
+        {
+            f"MDTM {file}": _ftp_date_format(datetime(2024, 5, 7))
+            for file in timelapse_files
+        }
+    )
+    ftps_session_mock.nlst.side_effect = DictGetter(
+        {"timelapse/": [Path(f).name for f in timelapse_files]}
+    )
+
+    timelapse_paths = list(map(Path, timelapse_files))
+    result_files = file_view.get_all_info()
+    assert len(timelapse_files) == len(result_files) and all(
+        file_info.path in timelapse_paths for file_info in result_files
+    )
+
+
+def test_list_ftp_paths_x1(settings, ftps_session_mock):
+    file_system = RemoteSDCardFileList(settings)
+    file_view = CachedFileView(file_system).with_filter("timelapse/", ".mp4")
+
+    timelapse_files = ["timelapse/video.mp4", "timelapse/video2.mp4"]
+    ftps_session_mock.size.side_effect = DictGetter(
+        {file: 100 for file in timelapse_files}
+    )
+    ftps_session_mock.sendcmd.side_effect = DictGetter(
+        {
+            f"MDTM {file}": _ftp_date_format(datetime(2024, 5, 7))
+            for file in timelapse_files
+        }
+    )
+    ftps_session_mock.nlst.side_effect = DictGetter({"timelapse/": timelapse_files})
+
+    timelapse_paths = list(map(Path, timelapse_files))
+    result_files = file_view.get_all_info()
+    assert len(timelapse_files) == len(result_files) and all(
+        file_info.path in timelapse_paths for file_info in result_files
+    )
+
+
+def test_delete_sd_file_gcode(printer: BambuVirtualPrinter):
+    with patch(
+        "octoprint_bambu_printer.printer.file_system.ftps_client.IoTFTPSConnection.delete_file"
+    ) as delete_function:
+        printer.write(b"M30 print.3mf\n")
+        printer.flush()
+        result = printer.readlines()
+        assert result[-1] == b"ok"
+        delete_function.assert_called_with("print.3mf")
+
+        printer.write(b"M30 cache/print.3mf\n")
+        printer.flush()
+        result = printer.readlines()
+        assert result[-1] == b"ok"
+        delete_function.assert_called_with("cache/print.3mf")
+
+
+def test_delete_sd_file_by_dosname(printer: BambuVirtualPrinter):
+    with patch(
+        "octoprint_bambu_printer.printer.file_system.ftps_client.IoTFTPSConnection.delete_file"
+    ) as delete_function:
+        file_info = printer.project_files.get_file_data("cache/print.3mf")
+        assert file_info is not None
+
+        printer.write(b"M30 " + file_info.dosname.encode() + b"\n")
+        printer.flush()
+        assert printer.readlines()[-1] == b"ok"
+        assert delete_function.call_count == 1
+        delete_function.assert_called_with("cache/print.3mf")
+
+        printer.write(b"M30 cache/print.3mf\n")
+        printer.flush()
+        assert printer.readlines()[-1] == b"ok"
+        assert delete_function.call_count == 2
+        delete_function.assert_called_with("cache/print.3mf")
+
+
+def test_select_project_file_by_stem(printer: BambuVirtualPrinter):
+    printer.write(b"M23 print3\n")
+    printer.flush()
+    result = printer.readlines()
+    assert printer.selected_file is not None
+    assert printer.selected_file.path == Path("cache/print3.gcode.3mf")
+    assert result[-2] == b"File selected"
+    assert result[-1] == b"ok"
+
+
+def test_select_project_long_name_file_with_multiple_extensions(
+    printer: BambuVirtualPrinter,
+):
+    printer.write(b"M23 long file path with spaces.gcode.3mf\n")
+    printer.flush()
+    result = printer.readlines()
+    assert printer.selected_file is not None
+    assert printer.selected_file.path == Path(
+        "cache/long file path with spaces.gcode.3mf"
+    )
+    assert result[-2] == b"File selected"
+    assert result[-1] == b"ok"
+
+
+def test_cannot_start_print_without_file(printer: BambuVirtualPrinter):
+    printer.write(b"M24\n")
+    printer.flush()
+    result = printer.readlines()
+    assert result[0] == b"ok"
+    assert isinstance(printer.current_state, IdleState)
+
+
+def test_non_existing_file_not_selected(printer: BambuVirtualPrinter):
+    assert printer.selected_file is None
+
+    printer.write(b"M23 non_existing.3mf\n")
+    printer.flush()
+    result = printer.readlines()
+    assert result[-2] != b"File selected"
+    assert result[-1] == b"ok"
+    assert printer.selected_file is None
+
+
+def test_print_started_with_selected_file(printer: BambuVirtualPrinter, print_job_mock):
+    assert printer.selected_file is None
+
+    printer.write(b"M20\n")
+    printer.flush()
+    printer.readlines()
+
+    printer.write(b"M23 print.3mf\n")
+    printer.flush()
+    result = printer.readlines()
+    assert result[-2] == b"File selected"
+    assert result[-1] == b"ok"
+
+    assert printer.selected_file is not None
+    assert printer.selected_file.file_name == "print.3mf"
+
+    print_job_mock.subtask_name = "print.3mf"
+
+    printer.write(b"M24\n")
+    printer.flush()
+    result = printer.readlines()
+    assert result[-1] == b"ok"
+
+    # emulate printer reporting it's status
+    print_job_mock.gcode_state = "RUNNING"
+    printer.new_update("event_printer_data_update")
+    printer.flush()
+    assert isinstance(printer.current_state, PrintingState)
+
+
+def test_pause_print(printer: BambuVirtualPrinter, bambu_client_mock, print_job_mock):
+    print_job_mock.subtask_name = "print.3mf"
+
+    printer.write(b"M20\n")
+    printer.write(b"M23 print.3mf\n")
+    printer.write(b"M24\n")
+    printer.flush()
+
+    print_job_mock.gcode_state = "RUNNING"
+    printer.new_update("event_printer_data_update")
+    printer.flush()
+    assert isinstance(printer.current_state, PrintingState)
+
+    printer.write(b"M25\n")  # pausing the print
+    printer.flush()
+    result = printer.readlines()
+    assert result[-1] == b"ok"
+
+    print_job_mock.gcode_state = "PAUSE"
+    printer.new_update("event_printer_data_update")
+    printer.flush()
+    assert isinstance(printer.current_state, PausedState)
+    bambu_client_mock.publish.assert_called_with(pybambu.commands.PAUSE)
+
+
+def test_events_update_printer_state(printer: BambuVirtualPrinter, print_job_mock):
+    print_job_mock.subtask_name = "print.3mf"
+    print_job_mock.gcode_state = "RUNNING"
+    printer.new_update("event_printer_data_update")
+    printer.flush()
+    assert isinstance(printer.current_state, PrintingState)
+
+    print_job_mock.gcode_state = "PAUSE"
+    printer.new_update("event_printer_data_update")
+    printer.flush()
+    assert isinstance(printer.current_state, PausedState)
+
+    print_job_mock.gcode_state = "IDLE"
+    printer.new_update("event_printer_data_update")
+    printer.flush()
+    assert isinstance(printer.current_state, IdleState)
+
+    print_job_mock.gcode_state = "FINISH"
+    printer.new_update("event_printer_data_update")
+    printer.flush()
+    assert isinstance(printer.current_state, IdleState)
+
+    print_job_mock.gcode_state = "FAILED"
+    printer.new_update("event_printer_data_update")
+    printer.flush()
+    assert isinstance(printer.current_state, IdleState)
+
+
+def test_printer_info_check(printer: BambuVirtualPrinter):
+    printer.write(b"M27\n")  # printer get info
+    printer.flush()
+
+    result = printer.readlines()
+    assert result[-1] == b"ok"
+    assert isinstance(printer.current_state, IdleState)
+
+
+def test_abort_print_during_printing(printer: BambuVirtualPrinter, print_job_mock):
+    print_job_mock.subtask_name = "print.3mf"
+
+    printer.write(b"M20\nM23 print.3mf\nM24\n")
+    printer.flush()
+    print_job_mock.gcode_state = "RUNNING"
+    print_job_mock.print_percentage = 50
+    printer.new_update("event_printer_data_update")
+    printer.flush()
+    printer.readlines()
+    assert isinstance(printer.current_state, PrintingState)
+
+    printer.write(b"M26 S0\n")
+    printer.flush()
+    result = printer.readlines()
+    assert result[-1] == b"ok"
+    assert isinstance(printer.current_state, IdleState)
+
+
+def test_abort_print_during_pause(printer: BambuVirtualPrinter, print_job_mock):
+    print_job_mock.subtask_name = "print.3mf"
+
+    printer.write(b"M20\nM23 print.3mf\nM24\n")
+    printer.flush()
+    print_job_mock.gcode_state = "RUNNING"
+    printer.new_update("event_printer_data_update")
+    printer.flush()
+
+    printer.write(b"M25\n")
+    printer.flush()
+    print_job_mock.gcode_state = "PAUSE"
+    printer.new_update("event_printer_data_update")
+    printer.flush()
+
+    printer.readlines()
+    assert isinstance(printer.current_state, PausedState)
+
+    printer.write(b"M26 S0\n")
+    printer.flush()
+    result = printer.readlines()
+    assert result[-1] == b"ok"
+    assert isinstance(printer.current_state, IdleState)
+
+
+def test_regular_move(printer: BambuVirtualPrinter, bambu_client_mock):
+    gcode = b"G28\nG1 X10 Y10\n"
+    printer.write(gcode)
+    printer.flush()
+    result = printer.readlines()
+    assert result[-1] == b"ok"
+
+    gcode_command = pybambu.commands.SEND_GCODE_TEMPLATE
+    gcode_command["print"]["param"] = "G28\n"
+    bambu_client_mock.publish.assert_called_with(gcode_command)
+
+    gcode_command["print"]["param"] = "G1 X10 Y10\n"
+    bambu_client_mock.publish.assert_called_with(gcode_command)
+
+
+def test_file_selection_does_not_affect_current_print(
+    printer: BambuVirtualPrinter, print_job_mock
+):
+    print_job_mock.subtask_name = "print.3mf"
+
+    printer.write(b"M23 print.3mf\nM24\n")
+    printer.flush()
+    print_job_mock.gcode_state = "RUNNING"
+    printer.new_update("event_printer_data_update")
+    printer.flush()
+    assert isinstance(printer.current_state, PrintingState)
+    assert printer.current_print_job is not None
+    assert printer.current_print_job.file_info.file_name == "print.3mf"
+    assert printer.current_print_job.progress == 0
+
+    printer.write(b"M23 print2.3mf\n")
+    printer.flush()
+    assert printer.current_print_job is not None
+    assert printer.current_print_job.file_info.file_name == "print.3mf"
+    assert printer.current_print_job.progress == 0
+
+
+def test_finished_print_job_reset_after_new_file_selected(
+    printer: BambuVirtualPrinter, print_job_mock
+):
+    print_job_mock.subtask_name = "print.3mf"
+
+    printer.write(b"M23 print.3mf\nM24\n")
+    printer.flush()
+    print_job_mock.gcode_state = "RUNNING"
+    printer.new_update("event_printer_data_update")
+    printer.flush()
+    assert isinstance(printer.current_state, PrintingState)
+    assert printer.current_print_job is not None
+    assert printer.current_print_job.file_info.file_name == "print.3mf"
+    assert printer.current_print_job.progress == 0
+
+    print_job_mock.print_percentage = 100
+    printer.current_state.update_print_job_info()
+    assert isinstance(printer.current_state, PrintingState)
+    assert printer.current_print_job.progress == 100
+
+    print_job_mock.gcode_state = "FINISH"
+    printer.new_update("event_printer_data_update")
+    printer.flush()
+    assert isinstance(printer.current_state, IdleState)
+    assert printer.current_print_job is None
+    assert printer.selected_file is not None
+    assert printer.selected_file.file_name == "print.3mf"
+
+    printer.write(b"M23 print2.3mf\n")
+    printer.flush()
+    assert printer.current_print_job is None
+    assert printer.selected_file is not None
+    assert printer.selected_file.file_name == "print2.3mf"
+
+
+def test_finish_detected_correctly(printer: BambuVirtualPrinter, print_job_mock):
+    print_job_mock.subtask_name = "print.3mf"
+    print_job_mock.gcode_state = "RUNNING"
+    print_job_mock.print_percentage = 99
+    printer.new_update("event_printer_data_update")
+    printer.flush()
+    assert isinstance(printer.current_state, PrintingState)
+    assert printer.current_print_job is not None
+    assert printer.current_print_job.file_info.file_name == "print.3mf"
+    assert printer.current_print_job.progress == 99
+
+    print_job_mock.print_percentage = 100
+    print_job_mock.gcode_state = "FINISH"
+    printer.new_update("event_printer_data_update")
+    printer.flush()
+    result = printer.readlines()
+    assert result[-3].endswith(b"1000/1000")
+    assert result[-2] == b"Done printing file"
+    assert result[-1] == b"Not SD printing"
+    assert isinstance(printer.current_state, IdleState)
+    assert printer.current_print_job is None
+    assert printer.selected_file is not None
+    assert printer.selected_file.file_name == "print.3mf"