set default username for BambuVirtualPrinter

add back missing PREPARE printing state and associate printing status

.github/FUNDING.yml

@@ -0,0 +1,3 @@
+github: [jneilliii]
+patreon: jneilliii
+custom: ['https://www.paypal.me/jneilliii']

.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,26 @@
+---
+name: Bug report
+about: Please make sure to check other issues, including closed ones, prior to submitting a bug report. Debug logs are required and any bug report submitted without them will be ignored and closed. 
+title: "[BUG]: "
+labels: ''
+assignees: ''
+
+---
+
+**Describe the Bug**
+<!-- A clear and concise description of what the bug is. -->
+
+**Expected Behavior**
+<!-- A clear and concise description of what you expected to happen. -->
+
+**Debug Logs**
+<!-- If logs are not included in your bug report it will be closed. Enable debug logging for octoprint.plugins.bambu_printer in OctoPrint's logging section of settings and recreate the issue then attach octoprint.log and plugin_bambu_printer_serial.log to this bug report. -->
+
+**Screenshots**
+<!-- Please share any relevant screenshots related to the issue. -->
+
+**Printer and Plugin Setting Details**
+
+* Printer model?
+* Is your printer connected to Bambu Cloud? 
+* Is the  plugin configured for local access only?

.github/ISSUE_TEMPLATE/feature_request.md

@@ -0,0 +1,20 @@
+---
+name: Feature request
+about: Create a feature request for an improvement or change you'd like implemented.
+title: "[FR]: "
+labels: ''
+assignees: ''
+
+---
+
+**Is your feature request related to a problem? Please describe.**
+<!-- A clear and concise description of what the problem is. Ex. I'm always frustrated when [...] -->
+
+**Describe the solution you'd like**
+<!-- A clear and concise description of what you want to happen. -->
+
+**Describe alternatives you've considered**
+<!-- A clear and concise description of any alternative solutions or features you've considered. -->
+
+**Additional context**
+<!-- Add any other context or screenshots about the feature request here. -->

.github/stale.yml

@@ -0,0 +1,16 @@
+# Number of days of inactivity before an issue becomes stale
+daysUntilStale: 14
+# Number of days of inactivity before a stale issue is closed
+daysUntilClose: 7
+# Issues with these labels will never be considered stale
+exemptLabels:
+  - enhancement
+  - bug
+# Label to use when marking an issue as stale
+staleLabel: stale
+# Comment to post when marking an issue as stale. Set to `false` to disable
+markComment: >
+  This issue has been automatically marked as stale because it has not had
+  activity in 14 days. It will be closed if no further activity occurs in 7 days.
+# Comment to post when closing a stale issue. Set to `false` to disable
+closeComment: false

.github/workflows/stale.yml

@@ -0,0 +1,27 @@
+name: Mark Stale Issues
+on:
+  workflow_dispatch:
+  schedule:
+  - cron: "0 0 * * *"
+permissions:
+  actions: write
+jobs:
+  stale:
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/stale@v9
+      with:
+        repo-token: ${{ secrets.GITHUB_TOKEN }}
+        stale-issue-message: 'This issue has been automatically marked as stale because it has not had activity in 14 days. It will be closed if no further activity occurs in 7 days'
+        days-before-stale: 14
+        days-before-close: 7
+        stale-issue-label: 'stale'
+        days-before-issue-stale: 14
+        days-before-pr-stale: -1
+        days-before-issue-close: 7
+        days-before-pr-close: -1
+        exempt-issue-labels: 'bug,enhancement'
+    - uses: actions/checkout@v4
+    - uses: gautamkrishnar/keepalive-workflow@v2
+      with:
+        use_api: true

octoprint_bambu_printer/bambu_print_plugin.py

@@ -85,7 +85,7 @@ class BambuPrintPlugin(
             "serial": "",
             "host": "",
             "access_code": "",
-            "username": "bblp",
+            "username": "octobambu",
             "timelapse": False,
             "bed_leveling": True,
             "flow_cali": False,
@@ -286,10 +286,10 @@ class BambuPrintPlugin(
     def get_update_information(self):
         return {
             "bambu_printer": {
-                "displayName": "Bambu Printer",
+                "displayName": "Manus Bambu Printer",
                 "displayVersion": self._plugin_version,
                 "type": "github_release",
-                "user": "jneilliii",
+                "user": "ManuelW",
                 "repo": "OctoPrint-BambuPrinter",
                 "current": self._plugin_version,
                 "stable_branch": {
@@ -304,6 +304,6 @@ class BambuPrintPlugin(
                         "comittish": ["rc", "master"],
                     }
                 ],
-                "pip": "https://github.com/jneilliii/OctoPrint-BambuPrinter/archive/{target_version}.zip",
+                "pip": "https://gitlab.fire-devils.org/3D-Druck/OctoPrint-BambuPrinter/archive/{target_version}.zip",
             }
         }

octoprint_bambu_printer/printer/bambu_virtual_printer.py

@@ -72,6 +72,7 @@ class BambuVirtualPrinter:
 
         self._running = True
         self._print_status_reporter = None
+        self._print_temp_reporter = None
         self._printer_thread = threading.Thread(
             target=self._printer_worker,
             name="octoprint.plugins.bambu_printer.printer_state",
@@ -192,7 +193,7 @@ class BambuVirtualPrinter:
             or print_job_state == "FAILED"
         ):
             self.change_state(self._state_idle)
-        elif print_job_state == "RUNNING":
+        elif print_job_state == "RUNNING" or print_job_state == "PREPARE":
             self.change_state(self._state_printing)
         elif print_job_state == "PAUSE":
             self.change_state(self._state_paused)
@@ -243,11 +244,7 @@ class BambuVirtualPrinter:
             device_type=self._settings.get(["device_type"]),
             serial=self._settings.get(["serial"]),
             host=self._settings.get(["host"]),
-            username=(
-                "bblp"
-                if self._settings.get_boolean(["local_mqtt"])
-                else self._settings.get(["username"])
-            ),
+            username=("bambuocto"),
             access_code=self._settings.get(["access_code"]),
             local_mqtt=self._settings.get_boolean(["local_mqtt"]),
             region=self._settings.get(["region"]),
@@ -367,8 +364,10 @@ class BambuVirtualPrinter:
             interval = int(matchS.group(1))
             if interval > 0:
                 self.start_continuous_status_report(interval)
+                return False
             else:
                 self.stop_continuous_status_report()
+                return False
 
         self.report_print_job_status()
         return True
@@ -403,10 +402,39 @@ class BambuVirtualPrinter:
         self._processTemperatureQuery()
         return True
 
+    @gcode_executor.register("M155")
+    def _auto_report_temperatures(self, data: str) -> bool:
+        matchS = re.search(r"S([0-9]+)", data)
+        if matchS:
+            interval = int(matchS.group(1))
+            if interval > 0:
+                self.start_continuous_temp_report(interval)
+            else:
+                self.stop_continuous_temp_report()
+
+        self.report_print_job_status()
+        return True
+
+    def start_continuous_temp_report(self, interval: int):
+        if self._print_temp_reporter is not None:
+            self._print_temp_reporter.cancel()
+
+        self._print_temp_reporter = RepeatedTimer(
+            interval, self._processTemperatureQuery
+        )
+        self._print_temp_reporter.start()
+
+    def stop_continuous_temp_report(self):
+        if self._print_temp_reporter is not None:
+            self._print_temp_reporter.cancel()
+            self._print_temp_reporter = None
+
     # noinspection PyUnusedLocal
     @gcode_executor.register_no_data("M115")
     def _report_firmware_info(self) -> bool:
         self.sendIO("Bambu Printer Integration")
+        self.sendIO("Cap:AUTOREPORT_SD_STATUS:1")
+        self.sendIO("Cap:AUTOREPORT_TEMP:1")
         self.sendIO("Cap:EXTENDED_M20:1")
         self.sendIO("Cap:LFN_WRITE:1")
         return True
@@ -442,19 +470,51 @@ class BambuVirtualPrinter:
             gcode_command = commands.SEND_GCODE_TEMPLATE
             percent = int(data.replace("M220 S", ""))
 
-            if percent is None or percent < 1 or percent > 166:
-                return True
+            def speed_fraction(speed_percent):
+                return math.floor(10000 / speed_percent) / 100
 
-            speed_fraction = 100 / percent
-            acceleration = math.exp((speed_fraction - 1.0191) / -0.814)
-            feed_rate = (
-                2.1645 * (acceleration**3)
-                - 5.3247 * (acceleration**2)
-                + 4.342 * acceleration
-                - 0.181
-            )
-            speed_level = 1.539 * (acceleration**2) - 0.7032 * acceleration + 4.0834
-            speed_command = f"M204.2 K${acceleration:.2f} \nM220 K${feed_rate:.2f} \nM73.2 R${speed_fraction:.2f} \nM1002 set_gcode_claim_speed_level ${speed_level:.0f}\n"
+            def acceleration_magnitude(speed_percent):
+                return math.exp((speed_fraction(speed_percent) - 1.0191) / -0.8139)
+
+            def feed_rate(speed_percent):
+                return 6.426e-5 * speed_percent ** 2 - 2.484e-3 * speed_percent + 0.654
+
+            def linear_interpolate(x, x_points, y_points):
+                if x <= x_points[0]: return y_points[0]
+                if x >= x_points[-1]: return y_points[-1]
+                for i in range(len(x_points) - 1):
+                    if x_points[i] <= x < x_points[i + 1]:
+                        t = (x - x_points[i]) / (x_points[i + 1] - x_points[i])
+                        return y_points[i] * (1 - t) + y_points[i + 1] * t
+
+            def scale_to_data_points(func, data_points):
+                data_points.sort(key=lambda x: x[0])
+                speeds, values = zip(*data_points)
+                scaling_factors = [v / func(s) for s, v in zip(speeds, values)]
+                return lambda x: func(x) * linear_interpolate(x, speeds, scaling_factors)
+
+            def speed_adjust(speed_percentage):
+                if not 30 <= speed_percentage <= 180:
+                    speed_percentage = 100
+
+                bambu_params = {
+                    "speed": [50, 100, 124, 166],
+                    "acceleration": [0.3, 1.0, 1.4, 1.6],
+                    "feed_rate": [0.7, 1.0, 1.4, 2.0]
+                }
+
+                acc_mag_scaled = scale_to_data_points(acceleration_magnitude,
+                                                      list(zip(bambu_params["speed"], bambu_params["acceleration"])))
+                feed_rate_scaled = scale_to_data_points(feed_rate,
+                                                        list(zip(bambu_params["speed"], bambu_params["feed_rate"])))
+
+                speed_frac = speed_fraction(speed_percentage)
+                acc_mag = acc_mag_scaled(speed_percentage)
+                feed = feed_rate_scaled(speed_percentage)
+                # speed_level = 1.539 * (acc_mag**2) - 0.7032 * acc_mag + 4.0834
+                return f"M204.2 K{acc_mag:.2f}\nM220 K{feed:.2f}\nM73.2 R{speed_frac:.2f}\n" # M1002 set_gcode_claim_speed_level ${speed_level:.0f}\n
+
+            speed_command = speed_adjust(percent)
 
             gcode_command["print"]["param"] = speed_command
             if self.bambu_client.publish(gcode_command):
@@ -516,8 +576,9 @@ class BambuVirtualPrinter:
 
     def report_print_job_status(self):
         if self.current_print_job is not None:
+            file_position = 1 if self.current_print_job.file_position == 0 else self.current_print_job.file_position
             self.sendIO(
-                f"SD printing byte {self.current_print_job.file_position}"
+                f"SD printing byte {file_position}"
                 f"/{self.current_print_job.file_info.size}"
             )
         else:

octoprint_bambu_printer/printer/file_system/cached_file_view.py

@@ -85,7 +85,7 @@ class CachedFileView:
         return file_data
 
     def _get_file_by_stem_cached(self, file_stem: str, allowed_suffixes: list[str]):
-        for file_path_str in self._file_data_cache.keys():
+        for file_path_str in list(self._file_data_cache.keys()) + list(self._file_alias_cache.keys()):
             file_path = Path(file_path_str)
             if file_stem == file_path.with_suffix("").stem and all(
                 suffix in allowed_suffixes for suffix in file_path.suffixes

octoprint_bambu_printer/printer/file_system/ftps_client.py

@@ -117,7 +117,7 @@ class IoTFTPSConnection:
                         # But since we operate in prot p mode
                         # we can close the connection always.
                         # This is cursed but it works.
-                        if "vsFTPd" in self.welcome:
+                        if "vsFTPd" in self.ftps_session.welcome:
                             conn.unwrap()
                         else:
                             conn.shutdown(socket.SHUT_RDWR)

octoprint_bambu_printer/printer/states/idle_state.py

@@ -1,8 +1,6 @@
 from __future__ import annotations
-from pathlib import Path
 
 from octoprint_bambu_printer.printer.file_system.file_info import FileInfo
-from octoprint_bambu_printer.printer.print_job import PrintJob
 from octoprint_bambu_printer.printer.states.a_printer_state import APrinterState
 
 
@@ -26,7 +24,7 @@ class IdleState(APrinterState):
         # URL to print. Root path, protocol can vary. E.g., if sd card, "ftp:///myfile.3mf", "ftp:///cache/myotherfile.3mf"
         filesystem_root = (
             "file:///mnt/sdcard/"
-            if self._printer._settings.get_boolean(["device_type"]) in ["X1", "X1C"]
+            if self._printer._settings.get(["device_type"]) in ["X1", "X1C"]
             else "file:///"
         )
 

octoprint_bambu_printer/printer/states/printing_state.py

@@ -22,6 +22,7 @@ class PrintingState(APrinterState):
 
     def __init__(self, printer: BambuVirtualPrinter) -> None:
         super().__init__(printer)
+        self._current_print_job = None
         self._is_printing = False
         self._sd_printing_thread = None
 
@@ -36,6 +37,7 @@ class PrintingState(APrinterState):
             self._is_printing = False
             self._sd_printing_thread.join()
             self._sd_printing_thread = None
+        self._printer.current_print_job = None
 
     def _start_worker_thread(self):
         if self._sd_printing_thread is None:

requirements.txt

@@ -7,3 +7,10 @@
 ###
 
 .
+
+pytest~=7.4.4
+pybambu~=1.0.1
+OctoPrint~=1.10.2
+setuptools~=70.0.0
+pyserial~=3.5
+Flask~=2.2.5

setup.py

@@ -14,20 +14,20 @@ plugin_package = "octoprint_bambu_printer"
 plugin_name = "OctoPrint-BambuPrinter"
 
 # The plugin's version. Can be overwritten within OctoPrint's internal data via __plugin_version__ in the plugin module
-plugin_version = "0.1.1"
+plugin_version = "1.0.0"
 
 # The plugin's description. Can be overwritten within OctoPrint's internal data via __plugin_description__ in the plugin
 # module
 plugin_description = """Connects OctoPrint to BambuLabs printers."""
 
 # The plugin's author. Can be overwritten within OctoPrint's internal data via __plugin_author__ in the plugin module
-plugin_author = "jneilliii"
+plugin_author = "ManuelW"
 
 # The plugin's author's mail address.
-plugin_author_email = "jneilliii+github@gmail.com"
+plugin_author_email = "manuelw@example.com"
 
 # The plugin's homepage URL. Can be overwritten within OctoPrint's internal data via __plugin_url__ in the plugin module
-plugin_url = "https://github.com/jneilliii/OctoPrint-BambuPrinter"
+plugin_url = "https://gitlab.fire-devils.org/3D-Druck/OctoPrint-BambuPrinter"
 
 # The plugin's license. Can be overwritten within OctoPrint's internal data via __plugin_license__ in the plugin module
 plugin_license = "AGPLv3"