0.1.4 (#43)

* fix stuck Printing from SD state when canceled in slicer or on printer, #42

octoprint_bambu_printer/printer/bambu_virtual_printer.py

@@ -72,6 +72,7 @@ class BambuVirtualPrinter:
 
         self._running = True
         self._print_status_reporter = None
+        self._print_temp_reporter = None
         self._printer_thread = threading.Thread(
             target=self._printer_worker,
             name="octoprint.plugins.bambu_printer.printer_state",
@@ -367,8 +368,10 @@ class BambuVirtualPrinter:
             interval = int(matchS.group(1))
             if interval > 0:
                 self.start_continuous_status_report(interval)
+                return False
             else:
                 self.stop_continuous_status_report()
+                return False
 
         self.report_print_job_status()
         return True
@@ -403,10 +406,39 @@ class BambuVirtualPrinter:
         self._processTemperatureQuery()
         return True
 
+    @gcode_executor.register("M155")
+    def _auto_report_temperatures(self, data: str) -> bool:
+        matchS = re.search(r"S([0-9]+)", data)
+        if matchS:
+            interval = int(matchS.group(1))
+            if interval > 0:
+                self.start_continuous_temp_report(interval)
+            else:
+                self.stop_continuous_temp_report()
+
+        self.report_print_job_status()
+        return True
+
+    def start_continuous_temp_report(self, interval: int):
+        if self._print_temp_reporter is not None:
+            self._print_temp_reporter.cancel()
+
+        self._print_temp_reporter = RepeatedTimer(
+            interval, self._processTemperatureQuery
+        )
+        self._print_temp_reporter.start()
+
+    def stop_continuous_temp_report(self):
+        if self._print_temp_reporter is not None:
+            self._print_temp_reporter.cancel()
+            self._print_temp_reporter = None
+
     # noinspection PyUnusedLocal
     @gcode_executor.register_no_data("M115")
     def _report_firmware_info(self) -> bool:
         self.sendIO("Bambu Printer Integration")
+        self.sendIO("Cap:AUTOREPORT_SD_STATUS:1")
+        self.sendIO("Cap:AUTOREPORT_TEMP:1")
         self.sendIO("Cap:EXTENDED_M20:1")
         self.sendIO("Cap:LFN_WRITE:1")
         return True
@@ -440,7 +472,7 @@ class BambuVirtualPrinter:
     def _set_feedrate_percent(self, data: str) -> bool:
         if self.bambu_client.connected:
             gcode_command = commands.SEND_GCODE_TEMPLATE
-            percent = int(data[1:])
+            percent = int(data.replace("M220 S", ""))
 
             if percent is None or percent < 1 or percent > 166:
                 return True

octoprint_bambu_printer/printer/file_system/cached_file_view.py

@@ -85,7 +85,7 @@ class CachedFileView:
         return file_data
 
     def _get_file_by_stem_cached(self, file_stem: str, allowed_suffixes: list[str]):
-        for file_path_str in self._file_data_cache.keys():
+        for file_path_str in list(self._file_data_cache.keys()) + list(self._file_alias_cache.keys()):
             file_path = Path(file_path_str)
             if file_stem == file_path.with_suffix("").stem and all(
                 suffix in allowed_suffixes for suffix in file_path.suffixes

octoprint_bambu_printer/printer/file_system/ftps_client.py

@@ -117,7 +117,7 @@ class IoTFTPSConnection:
                         # But since we operate in prot p mode
                         # we can close the connection always.
                         # This is cursed but it works.
-                        if "vsFTPd" in self.welcome:
+                        if "vsFTPd" in self.ftps_session.welcome:
                             conn.unwrap()
                         else:
                             conn.shutdown(socket.SHUT_RDWR)

octoprint_bambu_printer/printer/states/idle_state.py

@@ -1,8 +1,6 @@
 from __future__ import annotations
-from pathlib import Path
 
 from octoprint_bambu_printer.printer.file_system.file_info import FileInfo
-from octoprint_bambu_printer.printer.print_job import PrintJob
 from octoprint_bambu_printer.printer.states.a_printer_state import APrinterState
 
 
@@ -26,7 +24,7 @@ class IdleState(APrinterState):
         # URL to print. Root path, protocol can vary. E.g., if sd card, "ftp:///myfile.3mf", "ftp:///cache/myotherfile.3mf"
         filesystem_root = (
             "file:///mnt/sdcard/"
-            if self._printer._settings.get_boolean(["device_type"]) in ["X1", "X1C"]
+            if self._printer._settings.get(["device_type"]) in ["X1", "X1C"]
             else "file:///"
         )
 

octoprint_bambu_printer/printer/states/printing_state.py

@@ -22,6 +22,7 @@ class PrintingState(APrinterState):
 
     def __init__(self, printer: BambuVirtualPrinter) -> None:
         super().__init__(printer)
+        self._current_print_job = None
         self._is_printing = False
         self._sd_printing_thread = None
 
@@ -36,6 +37,7 @@ class PrintingState(APrinterState):
             self._is_printing = False
             self._sd_printing_thread.join()
             self._sd_printing_thread = None
+        self._printer.current_print_job = None
 
     def _start_worker_thread(self):
         if self._sd_printing_thread is None:

requirements.txt

@@ -7,3 +7,10 @@
 ###
 
 .
+
+pytest~=7.4.4
+pybambu~=1.0.1
+OctoPrint~=1.10.2
+setuptools~=70.0.0
+pyserial~=3.5
+Flask~=2.2.5

setup.py

@@ -14,7 +14,7 @@ plugin_package = "octoprint_bambu_printer"
 plugin_name = "OctoPrint-BambuPrinter"
 
 # The plugin's version. Can be overwritten within OctoPrint's internal data via __plugin_version__ in the plugin module
-plugin_version = "0.1.0"
+plugin_version = "0.1.4"
 
 # The plugin's description. Can be overwritten within OctoPrint's internal data via __plugin_description__ in the plugin
 # module