Implement idle state. Fix serial io

octoprint_bambu_printer/printer/bambu_virtual_printer.py

@@ -67,13 +67,13 @@ class BambuVirtualPrinter:
         self._state_finished = PrintFinishedState(self)
         self._current_state = self._state_idle
         self._serial_io = PrinterSerialIO(
-            self._process_gcode_serial_command,
-            serial_log_handler,
+            handle_command_callback=self._process_gcode_serial_command,
+            settings=settings,
+            serial_log_handler=serial_log_handler,
             read_timeout=read_timeout,
             write_timeout=10.0,
         )
 
-        self.tick_rate = 2.0
         self._telemetry = BambuPrinterTelemetry()
         self._telemetry.hasChamber = printer_profile_manager.get_current().get(
             "heatedChamber"
@@ -153,7 +153,6 @@ class BambuVirtualPrinter:
 
         if print_job.gcode_state == "RUNNING":
             self.change_state(self._state_printing)
-            self._state_printing.update_print_job_info()
         if print_job.gcode_state == "PAUSE":
             self.change_state(self._state_paused)
         if print_job.gcode_state == "FINISH" or print_job.gcode_state == "FAILED":
@@ -228,17 +227,6 @@ class BambuVirtualPrinter:
     def _reset(self):
         with self._serial_io.incoming_lock:
             self.lastN = 0
-
-            self._debug_awol = False
-            self._debug_sleep = 0
-            # self._sleepAfterNext.clear()
-            # self._sleepAfter.clear()
-
-            self._dont_answer = False
-            self._broken_klipper_connection = False
-
-            self._debug_drop_connection = False
-
             self._running = False
 
             if self._sdstatus_reporter is not None:
@@ -249,7 +237,6 @@ class BambuVirtualPrinter:
                 for item in self._settings.get(["resetLines"]):
                     self.sendIO(item + "\n")
 
-            self._locked = self._settings.get_boolean(["locked"])
             self._serial_io.reset()
 
     @property
@@ -284,6 +271,15 @@ class BambuVirtualPrinter:
     def readline(self) -> bytes:
         return self._serial_io.readline()
 
+    def readlines(self) -> list[bytes]:
+        result = []
+        self._serial_io.wait_for_input()
+        next_line = self._serial_io.readline()
+        while next_line != b"":
+            result.append(next_line)
+            next_line = self._serial_io.readline()
+        return result
+
     def sendIO(self, line: str):
         self.sendIO(line)
 
@@ -291,26 +287,24 @@ class BambuVirtualPrinter:
         self._serial_io.sendOk()
 
     ##~~ command implementations
-    def run_gcode_handler(self, gcode, data):
-        self.gcode_executor.execute(self, gcode, data)
 
     @gcode_executor.register("M23")
-    def _gcode_M23(self, data: str) -> bool:
+    def _select_sd_file(self, data: str) -> bool:
         filename = data.split(maxsplit=1)[1].strip()
         self.file_system.select_file(filename)
         return True
 
     @gcode_executor.register("M26")
-    def _gcode_M26(self, data: str) -> bool:
+    def _set_sd_position(self, data: str) -> bool:
         if data == "M26 S0":
-            return self._cancelSdPrint()
+            return self._cancel_print()
         else:
             self._log.debug("ignoring M26 command.")
             self.sendIO("M26 disabled for Bambu")
             return True
 
     @gcode_executor.register("M27")
-    def _gcode_M27(self, data: str) -> bool:
+    def _report_sd_print_status(self, data: str) -> bool:
         matchS = re.search(r"S([0-9]+)", data)
         if matchS:
             interval = int(matchS.group(1))
@@ -329,18 +323,18 @@ class BambuVirtualPrinter:
         return True
 
     @gcode_executor.register("M30")
-    def _gcode_M30(self, data: str) -> bool:
+    def _delete_sd_file(self, data: str) -> bool:
         filename = data.split(None, 1)[1].strip()
         self.file_system.delete_file(filename)
         return True
 
     @gcode_executor.register("M105")
-    def _gcode_M105(self, data: str) -> bool:
+    def _report_temperatures(self, data: str) -> bool:
         return self._processTemperatureQuery()
 
     # noinspection PyUnusedLocal
     @gcode_executor.register("M115")
-    def _gcode_M115(self, data: str) -> bool:
+    def _report_firmware_info(self, data: str) -> bool:
         self.sendIO("Bambu Printer Integration")
         self.sendIO("Cap:EXTENDED_M20:1")
         self.sendIO("Cap:LFN_WRITE:1")
@@ -348,14 +342,14 @@ class BambuVirtualPrinter:
         return True
 
     @gcode_executor.register("M117")
-    def _gcode_M117(self, data: str) -> bool:
+    def _get_lcd_message(self, data: str) -> bool:
         # we'll just use this to echo a message, to allow playing around with pause triggers
         result = re.search(r"M117\s+(.*)", data).group(1)
         self.sendIO(f"echo:{result}")
-        return False
+        return True
 
     @gcode_executor.register("M118")
-    def _gcode_M118(self, data: str) -> bool:
+    def _serial_print(self, data: str) -> bool:
         match = re.search(r"M118 (?:(?P<parameter>A1|E1|Pn[012])\s)?(?P<text>.*)", data)
         if not match:
             self.sendIO("Unrecognized command parameters for M118")
@@ -374,7 +368,7 @@ class BambuVirtualPrinter:
 
     # noinspection PyUnusedLocal
     @gcode_executor.register("M220")
-    def _gcode_M220(self, data: str) -> bool:
+    def _set_feedrate_percent(self, data: str) -> bool:
         if self.bambu_client.connected:
             gcode_command = commands.SEND_GCODE_TEMPLATE
             percent = int(data[1:])
@@ -401,9 +395,9 @@ class BambuVirtualPrinter:
     def _process_gcode_serial_command(self, gcode_letter: str, gcode: str, data: bytes):
         self._log.debug(f"processing gcode command {gcode_letter} {gcode} {data}")
         if gcode_letter in self.gcode_executor:
-            handled = self.run_gcode_handler(gcode_letter, data)
+            handled = self.gcode_executor.execute(self, gcode_letter, data)
         else:
-            handled = self.run_gcode_handler(gcode, data)
+            handled = self.gcode_executor.execute(self, gcode, data)
         if handled:
             self._serial_io.sendOk()
             return
@@ -416,39 +410,37 @@ class BambuVirtualPrinter:
                 self._log.info("command sent successfully")
                 self._serial_io.sendOk()
 
-    ##~~ further helpers
-
     @gcode_executor.register_no_data("M112")
-    def _kill(self):
+    def _shutdown(self):
         self._running = True
         if self.bambu_client.connected:
             self.bambu_client.disconnect()
         self.sendIO("echo:EMERGENCY SHUTDOWN DETECTED. KILLED.")
         self._serial_io.stop()
+        return True
 
     @gcode_executor.register_no_data("M20")
-    def _listSd(self):
+    def _list_sd(self):
         self.sendIO("Begin file list")
         for item in map(lambda f: f.get_log_info(), self.file_system.get_all_files()):
             self.sendIO(item)
         self.sendIO("End file list")
+        return True
 
     @gcode_executor.register_no_data("M24")
-    def _startSdPrint(self, from_printer: bool = False) -> bool:
-        self._log.debug(f"_startSdPrint: from_printer={from_printer}")
-        self.change_state(self._state_printing)
+    def _start_print(self):
+        self._current_state.start_new_print()
+        return True
 
     @gcode_executor.register_no_data("M25")
-    def _pauseSdPrint(self):
-        if self.bambu_client.connected:
-            if self.bambu_client.publish(commands.PAUSE):
-                self._log.info("print paused")
-            else:
-                self._log.info("print pause failed")
+    def _pause_print(self):
+        self._current_state.pause_print()
+        return True
 
     @gcode_executor.register("M524")
-    def _cancelSdPrint(self) -> bool:
-        self._current_state.cancel()
+    def _cancel_print(self):
+        self._current_state.cancel_print()
+        return True
 
     def report_print_job_status(self):
         print_job = self.current_print_job

octoprint_bambu_printer/printer/gcode_executor.py

@@ -300,6 +300,7 @@ class GCodeExecutor:
 
     def execute(self, printer, gcode, data):
         gcode_info = self._gcode_with_info(gcode)
+        try:
             if gcode in self.gcode_handlers:
                 self._log.debug(f"Executing {gcode_info}")
                 return self.gcode_handlers[gcode](printer, data)
@@ -309,6 +310,9 @@ class GCodeExecutor:
             else:
                 self._log.debug(f"ignoring {gcode_info} command.")
                 return True
+        except Exception as e:
+            self._log.error(f"Error {gcode_info}: {str(e)}")
+            return False
 
     def _gcode_with_info(self, gcode):
         return f"{gcode} ({GCODE_DOCUMENTATION.get(gcode, 'Info not specified')})"

octoprint_bambu_printer/printer/printer_serial_io.py

@@ -48,26 +48,19 @@ class PrinterSerialIO(threading.Thread):
 
         self._rx_buffer_size = 64
         self._incoming_lock = threading.RLock()
+        self._input_queue_empty = threading.Event()
+        self._input_queue_empty.set()
+        self._input_processing_finished = threading.Event()
+        self._input_processing_finished.set()
 
         self.incoming = CharCountingQueue(self._rx_buffer_size, name="RxBuffer")
         self.outgoing = queue.Queue()
-        self.buffered = queue.Queue(maxsize=4)
-        self.command_queue = queue.Queue()
 
     @property
     def incoming_lock(self):
         return self._incoming_lock
 
     def run(self) -> None:
-        linenumber = 0
-        next_wait_timeout = 0
-
-        def recalculate_next_wait_timeout():
-            nonlocal next_wait_timeout
-            next_wait_timeout = time.monotonic() + self._wait_interval
-
-        recalculate_next_wait_timeout()
-
         data = None
 
         buf = b""
@@ -76,7 +69,9 @@ class PrinterSerialIO(threading.Thread):
                 data = self.incoming.get(timeout=0.01)
                 data = to_bytes(data, encoding="ascii", errors="replace")
                 self.incoming.task_done()
+                self._input_queue_empty.clear()
             except queue.Empty:
+                self._input_queue_empty.set()
                 continue
             except Exception:
                 if self.incoming is None:
@@ -92,40 +87,52 @@ class PrinterSerialIO(threading.Thread):
                 else:
                     continue
 
-            recalculate_next_wait_timeout()
-
             if data is None:
                 continue
 
             self._received_lines += 1
 
-            # strip checksum
+            try:
+                self._process_input_line(data)
+            finally:
+                self._input_processing_finished.set()
+
+        self._serial_log.debug("Closing down read loop")
+
+    def stop(self):
+        self._running = False
+
+    def wait_for_input(self):
+        self._input_queue_empty.wait()
+        self._input_processing_finished.wait()
+
+    def _process_input_line(self, data: bytes):
         if b"*" in data:
             checksum = int(data[data.rfind(b"*") + 1 :])
             data = data[: data.rfind(b"*")]
             if not checksum == self._calculate_checksum(data):
                 self._triggerResend(expected=self.current_line + 1)
-                    continue
+                return
 
             self.current_line += 1
         elif self._settings.get_boolean(["forceChecksum"]):
             self.send(self._format_error("checksum_missing"))
-                continue
+            return
 
         # track N = N + 1
+        linenumber = 0
         if data.startswith(b"N") and b"M110" in data:
             linenumber = int(re.search(b"N([0-9]+)", data).group(1))
             self.lastN = linenumber
             self.current_line = linenumber
             self.sendOk()
-                continue
-
+            return
         elif data.startswith(b"N"):
             linenumber = int(re.search(b"N([0-9]+)", data).group(1))
             expected = self.lastN + 1
             if linenumber != expected:
                 self._triggerResend(actual=linenumber)
-                    continue
+                return
             else:
                 self.lastN = linenumber
 
@@ -143,11 +150,6 @@ class PrinterSerialIO(threading.Thread):
 
             self._handle_command_callback(gcode_letter, gcode, data)
 
-            self._serial_log.debug("Closing down read loop")
-
-    def stop(self):
-        self._running = False
-
     def _showPrompt(self, text, choices):
         self._hidePrompt()
         self.send(f"//action:prompt_begin {text}")
@@ -180,11 +182,11 @@ class PrinterSerialIO(threading.Thread):
 
     def readline(self) -> bytes:
         assert self.outgoing is not None
-        timeout = self._read_timeout
-
         try:
             # fetch a line from the queue, wait no longer than timeout
-            line = to_unicode(self.outgoing.get(timeout=timeout), errors="replace")
+            line = to_unicode(
+                self.outgoing.get(timeout=self._read_timeout), errors="replace"
+            )
             self._serial_log.debug(f">>> {line.strip()}")
             self.outgoing.task_done()
             return to_bytes(line)
@@ -197,8 +199,6 @@ class PrinterSerialIO(threading.Thread):
             self.outgoing.put(line)
 
     def sendOk(self):
-        if self.outgoing is None:
-            return
         self.send("ok")
 
     def reset(self):

octoprint_bambu_printer/printer/states/a_printer_state.py

@@ -25,17 +25,19 @@ class APrinterState:
     def handle_gcode(self, gcode):
         self._log.debug(f"{self.__class__.__name__} gcode execution disabled")
 
-    def connect(self):
-        self._log_skip_state_transition("connect")
+    def start_new_print(self):
+        self._log_skip_state_transition("start_new_print")
 
-    def pause(self):
-        self._log_skip_state_transition("pause")
+    def pause_print(self):
+        self._log_skip_state_transition("pause_print")
 
-    def cancel(self):
-        self._log_skip_state_transition("cancel")
+    def cancel_print(self):
+        self._log_skip_state_transition("cancel_print")
 
-    def resume(self):
-        self._log_skip_state_transition("resume")
+    def resume_print(self):
+        self._log_skip_state_transition("resume_print")
 
     def _log_skip_state_transition(self, method):
-        self._log.debug(f"skipping {self.__class__.__name__} state transition {method}")
+        self._log.debug(
+            f"skipping {self.__class__.__name__} state transition for '{method}'"
+        )

octoprint_bambu_printer/printer/states/idle_state.py

@@ -4,4 +4,50 @@ from octoprint_bambu_printer.printer.states.a_printer_state import APrinterState
 
 
 class IdleState(APrinterState):
-    pass
+
+    def start_new_print(self):
+        selected_file = self._printer.file_system.selected_file
+        if selected_file is None:
+            self._log.warn("Cannot start print job if file was not selected")
+            self._printer.change_state(self._printer._state_idle)
+            return
+
+        print_command = self._get_print_command_for_file(selected_file)
+        if self._printer.bambu_client.publish(print_command):
+            self._log.info(f"Started print for {selected_file.file_name}")
+            self._printer.change_state(self._printer._state_printing)
+        else:
+            self._log.warn(f"Failed to start print for {selected_file.file_name}")
+            self._printer.change_state(self._printer._state_idle)
+
+    def _get_print_command_for_file(self, selected_file):
+        print_command = {
+            "print": {
+                "sequence_id": 0,
+                "command": "project_file",
+                "param": "Metadata/plate_1.gcode",
+                "md5": "",
+                "profile_id": "0",
+                "project_id": "0",
+                "subtask_id": "0",
+                "task_id": "0",
+                "subtask_name": f"{selected_file}",
+                "file": f"{selected_file}",
+                "url": (
+                    f"file:///mnt/sdcard/{selected_file}"
+                    if self._printer._settings.get_boolean(["device_type"])
+                    in ["X1", "X1C"]
+                    else f"file:///sdcard/{selected_file}"
+                ),
+                "timelapse": self._printer._settings.get_boolean(["timelapse"]),
+                "bed_leveling": self._printer._settings.get_boolean(["bed_leveling"]),
+                "flow_cali": self._printer._settings.get_boolean(["flow_cali"]),
+                "vibration_cali": self._printer._settings.get_boolean(
+                    ["vibration_cali"]
+                ),
+                "layer_inspect": self._printer._settings.get_boolean(["layer_inspect"]),
+                "use_ams": self._printer._settings.get_boolean(["use_ams"]),
+            }
+        }
+
+        return print_command

octoprint_bambu_printer/printer/states/printing_state.py

@@ -22,7 +22,7 @@ class PrintingState(APrinterState):
 
     def __init__(self, printer: BambuVirtualPrinter) -> None:
         super().__init__(printer)
-        self._printingLock = threading.Event()
+        self._printing_lock = threading.Event()
         self._print_job: PrintJob | None = None
         self._sd_printing_thread = None
 
@@ -31,20 +31,22 @@ class PrintingState(APrinterState):
         return self._print_job
 
     def init(self):
-        if not self._printingLock.is_set():
-            self._printingLock.set()
+        self._printing_lock.set()
+        self.update_print_job_info()
+        self._start_worker_thread()
 
     def finalize(self):
-        if self._printingLock.is_set():
-            self._printingLock.clear()
+        self._printing_lock.clear()
 
-    def _start_worker_thread(self, from_printer: bool = False):
+        if self._sd_printing_thread is not None and self._sd_printing_thread.is_alive():
+            self._sd_printing_thread.join()
+            self._sd_printing_thread = None
+
+    def _start_worker_thread(self):
         if self._sd_printing_thread is None:
-            self._sdPrinting = True
-            self._sdPrintStarting = True
-            self._sd_printing_thread = threading.Thread(
-                target=self._printing_worker, kwargs={"from_printer": from_printer}
-            )
+            if not self._printing_lock.is_set():
+                self._printing_lock.set()
+            self._sd_printing_thread = threading.Thread(target=self._printing_worker)
             self._sd_printing_thread.start()
 
     def update_print_job_info(self):
@@ -55,88 +57,52 @@ class PrintingState(APrinterState):
         )
         if project_file_info is None:
             self._log.debug(f"No 3mf file found for {print_job_info}")
+            self._print_job = None
             return
 
         if self._printer.file_system.select_file(filename):
             self._printer.sendOk()
-        self.start_new_print(from_printer=True)
 
         # fuzzy math here to get print percentage to match BambuStudio
         progress = print_job_info.get("print_percentage")
         self._print_job = PrintJob(project_file_info, 0)
         self._print_job.progress = progress
 
-    def start_new_print(self, from_printer: bool = False):
-        if self._printer.file_system.selected_file is not None:
-            self._start_worker_thread(from_printer)
+    def _printing_worker(self):
+        if self._print_job is not None:
+            while (
+                self._printer.is_running
+                and self._print_job.file_info is not None
+                and self._print_job.file_position < self._print_job.file_info.size
+            ):
+                self.update_print_job_info()
+                self._printer.report_print_job_status()
+                time.sleep(3)
+                self._printing_lock.wait()
+            self._log.debug(
+                f"SD File Print finishing: {self._print_job.file_info.file_name}"
+            )
+        self._printer.change_state(self._printer._state_finished)
 
-        if self._sd_printing_thread is not None:
+    def pause_print(self):
+        if self._printer.bambu_client.connected:
+            if self._printer.bambu_client.publish(pybambu.commands.PAUSE):
+                self._log.info("print paused")
+                self._printer.change_state(self._printer._state_finished)
+            else:
+                self._log.info("print pause failed")
+
+    def resume_print(self):
         if self._printer.bambu_client.connected:
             if self._printer.bambu_client.publish(pybambu.commands.RESUME):
                 self._log.info("print resumed")
             else:
                 self._log.info("print resume failed")
-        return True
 
-    def _printing_worker(self, from_printer: bool = False):
-        try:
-            if not from_printer and self._printer.bambu_client.connected:
-                selected_file = self._printer.file_system.selected_file
-                print_command = {
-                    "print": {
-                        "sequence_id": 0,
-                        "command": "project_file",
-                        "param": "Metadata/plate_1.gcode",
-                        "md5": "",
-                        "profile_id": "0",
-                        "project_id": "0",
-                        "subtask_id": "0",
-                        "task_id": "0",
-                        "subtask_name": f"{selected_file}",
-                        "file": f"{selected_file}",
-                        "url": (
-                            f"file:///mnt/sdcard/{selected_file}"
-                            if self._printer._settings.get_boolean(["device_type"])
-                            in ["X1", "X1C"]
-                            else f"file:///sdcard/{selected_file}"
-                        ),
-                        "timelapse": self._printer._settings.get_boolean(["timelapse"]),
-                        "bed_leveling": self._printer._settings.get_boolean(
-                            ["bed_leveling"]
-                        ),
-                        "flow_cali": self._printer._settings.get_boolean(["flow_cali"]),
-                        "vibration_cali": self._printer._settings.get_boolean(
-                            ["vibration_cali"]
-                        ),
-                        "layer_inspect": self._printer._settings.get_boolean(
-                            ["layer_inspect"]
-                        ),
-                        "use_ams": self._printer._settings.get_boolean(["use_ams"]),
-                    }
-                }
-                self._printer.bambu_client.publish(print_command)
-
-            while self._print_job.file_position < self._print_job.file_info.size:
-                if self._printer.is_running:
-                    break
-
-                self._printingLock.wait()
-                self._printer.report_print_job_status()
-                time.sleep(3)
-            self._log.debug(f"SD File Print: {self._selectedSdFile}")
-        except AttributeError:
-            if self.outgoing is not None:
-                raise
-
-        self._printer.change_state(self._printer._state_finished)
-
-    def cancel(self):
+    def cancel_print(self):
         if self._printer.bambu_client.connected:
             if self._printer.bambu_client.publish(pybambu.commands.STOP):
                 self._log.info("print cancelled")
                 self._printer.change_state(self._printer._state_finished)
-                return True
             else:
                 self._log.info("print cancel failed")
-                return False
-        return False

test/test_gcode_execution.py

@@ -2,6 +2,7 @@ from __future__ import annotations
 from datetime import datetime, timezone
 import logging
 from pathlib import Path
+import time
 import unittest
 from unittest.mock import MagicMock
 import unittest.mock
@@ -50,6 +51,7 @@ def settings(output_test_folder):
             "access_code": "12345",
         }
     )
+    _settings.get_boolean.side_effect = DictGetter({"forceChecksum": False})
 
     log_file_path = output_test_folder / "log.txt"
     log_file_path.touch()
@@ -128,13 +130,13 @@ def test_initial_state(printer: BambuVirtualPrinter):
 
 def test_list_sd_card(printer: BambuVirtualPrinter):
     printer.write(b"M20\n")  # GCode for listing SD card
-    result = printer.readline()
+    time.sleep(0.1)
+    result = printer.readlines()
     assert result == ""  # Replace with the actual expected result
 
 
 def test_start_print(printer: BambuVirtualPrinter):
-    gcode = b"G28\nG1 X10 Y10\n"
-    printer.write(gcode)
+    printer.write(b"M\n")
     result = printer.readline()
     assert isinstance(printer.current_state, PrintingState)