0.1.8rc12

update pybambu module from upstream HA project

octoprint_bambu_printer/printer/bambu_virtual_printer.py

@@ -259,19 +259,20 @@ class BambuVirtualPrinter:
             f"connecting via local mqtt: {self._settings.get_boolean(['local_mqtt'])}"
         )
         bambu_client = BambuClient(
-            device_type=self._settings.get(["device_type"]),
+            {"device_type": self._settings.get(["device_type"]),
-            serial=self._settings.get(["serial"]),
+            "serial": self._settings.get(["serial"]),
-            host=self._settings.get(["host"]),
+            "host": self._settings.get(["host"]),
-            username=(
+            "username": (
                 "bblp"
                 if self._settings.get_boolean(["local_mqtt"])
                 else self._settings.get(["username"])
             ),
-            access_code=self._settings.get(["access_code"]),
+            "access_code": self._settings.get(["access_code"]),
-            local_mqtt=self._settings.get_boolean(["local_mqtt"]),
+            "local_mqtt": self._settings.get_boolean(["local_mqtt"]),
-            region=self._settings.get(["region"]),
+            "region": self._settings.get(["region"]),
-            email=self._settings.get(["email"]),
+            "email": self._settings.get(["email"]),
-            auth_token=self._settings.get(["auth_token"]) if self._settings.get_boolean(["local_mqtt"]) is False else "",
+            "auth_token": self._settings.get(["auth_token"]) if self._settings.get_boolean(["local_mqtt"]) is False else "",
+             }
         )
         bambu_client.on_disconnect = self.on_disconnect(bambu_client.on_disconnect)
         bambu_client.on_connect = self.on_connect(bambu_client.on_connect)

octoprint_bambu_printer/printer/pybambu/bambu_client.py

@@ -181,7 +181,7 @@ class ChamberImageThread(threading.Thread):
 
                                 # Reset buffer
                                 img = None
-                            # else:
+                            # else:     
                             # Otherwise we need to continue looping without reseting the buffer to receive the remaining data
                             # and without delaying.
 
@@ -237,7 +237,7 @@ class MqttThread(threading.Thread):
         exceptionSeen = ""
         while True:
             try:
-                host = self._client.host if self._client.local_mqtt else self._client.bambu_cloud.cloud_mqtt_host
+                host = self._client.host if self._client._local_mqtt else self._client.bambu_cloud.cloud_mqtt_host
                 LOGGER.debug(f"Connect: Attempting Connection to {host}")
                 self._client.client.connect(host, self._client._port, keepalive=5)
 
@@ -285,25 +285,32 @@ class BambuClient:
     _camera = None
     _usage_hours: float
 
-    def __init__(self, device_type: str, serial: str, host: str, local_mqtt: bool, region: str, email: str,
+    def __init__(self, config):
-                 username: str, auth_token: str, access_code: str, usage_hours: float = 0, manual_refresh_mode: bool = False, chamber_image: bool = True):
+        self.host = config['host']
-        self.callback = None
+        self._callback = None
-        self.host = host
+
-        self.local_mqtt = local_mqtt
+        self._access_code = config.get('access_code', '')
-        self._serial = serial
+        self._auth_token = config.get('auth_token', '')
-        self._auth_token = auth_token
+        self._device_type = config.get('device_type', 'unknown')
-        self._access_code = access_code
+        self._local_mqtt = config.get('local_mqtt', False)
-        self._username = username
+        self._manual_refresh_mode = config.get('manual_refresh_mode', False)
+        self._serial = config.get('serial', '')
+        self._usage_hours = config.get('usage_hours', 0)
+        self._username = config.get('username', '')
+        self._enable_camera = config.get('enable_camera', True)
+
         self._connected = False
-        self._device_type = device_type
-        self._usage_hours = usage_hours
         self._port = 1883
         self._refreshed = False
-        self._manual_refresh_mode = manual_refresh_mode
+
         self._device = Device(self)
-        self.bambu_cloud = BambuCloud(region, email, username, auth_token)
+        self.bambu_cloud = BambuCloud(
+            config.get('region', ''),
+            config.get('email', ''),
+            config.get('username', ''),
+            config.get('auth_token', '')
+        )
         self.slicer_settings = SlicerSettings(self)
-        self.use_chamber_image = chamber_image
 
     @property
     def connected(self):
@@ -322,7 +329,22 @@ class BambuClient:
             self.disconnect()
         else:
             # Reconnect normally
-            self.connect(self.callback)
+            self.connect(self._callback)
+
+    @property
+    def camera_enabled(self):
+        return self._enable_camera
+    
+    def callback(self, event: str):
+        if self._callback is not None:
+            self._callback(event)
+
+    def set_camera_enabled(self, enable):
+        self._enable_camera = enable
+        if self._enable_camera:
+            self._start_camera()
+        else:
+            self._stop_camera()
 
     def setup_tls(self):
         self.client.tls_set(tls_version=ssl.PROTOCOL_TLS, cert_reqs=ssl.CERT_NONE)
@@ -331,7 +353,7 @@ class BambuClient:
     def connect(self, callback):
         """Connect to the MQTT Broker"""
         self.client = mqtt.Client()
-        self.callback = callback
+        self._callback = callback
         self.client.on_connect = self.on_connect
         self.client.on_disconnect = self.on_disconnect
         self.client.on_message = self.on_message
@@ -342,7 +364,7 @@ class BambuClient:
         self.setup_tls()
 
         self._port = 8883
-        if self.local_mqtt:
+        if self._local_mqtt:
             self.client.username_pw_set("bblp", password=self._access_code)
         else:
             self.client.username_pw_set(self._username, password=self._auth_token)
@@ -371,6 +393,22 @@ class BambuClient:
         LOGGER.info("On Connect: Connected to printer")
         self._on_connect()
 
+    def _start_camera(self):
+        if not self._device.supports_feature(Features.CAMERA_RTSP):
+            if self._device.supports_feature(Features.CAMERA_IMAGE):
+                if self._enable_camera:
+                    LOGGER.debug("Starting Chamber Image thread")
+                    self._camera = ChamberImageThread(self)
+                    self._camera.start()
+            elif (self.host == "") or (self._access_code == ""):
+                LOGGER.debug("Skipping camera setup as local access details not provided.")
+
+    def _stop_camera(self):
+        if self._camera is not None:
+            LOGGER.debug("Stopping camera thread")
+            self._camera.stop()
+            self._camera.join()
+
     def _on_connect(self):
         self._connected = True
         self.subscribe_and_request_info()
@@ -379,14 +417,7 @@ class BambuClient:
         self._watchdog = WatchdogThread(self)
         self._watchdog.start()
 
-        if not self._device.supports_feature(Features.CAMERA_RTSP):
+        self._start_camera()
-            if self._device.supports_feature(Features.CAMERA_IMAGE):
-                if self.use_chamber_image:
-                    LOGGER.debug("Starting Chamber Image thread")
-                    self._camera = ChamberImageThread(self)
-                    self._camera.start()
-            elif (self.host == "") or (self._access_code == ""):
-                LOGGER.debug("Skipping camera setup as local access details not provided.")
 
     def try_on_connect(self,
                        client_: mqtt.Client,
@@ -410,7 +441,7 @@ class BambuClient:
         """Called when MQTT Disconnects"""
         LOGGER.warn(f"On Disconnect: Printer disconnected with error code: {result_code}")
         self._on_disconnect()
-
+    
     def _on_disconnect(self):
         LOGGER.debug("_on_disconnect: Lost connection to the printer")
         self._connected = False
@@ -419,10 +450,7 @@ class BambuClient:
             LOGGER.debug("Stopping watchdog thread")
             self._watchdog.stop()
             self._watchdog.join()
-        if self._camera is not None:
+        self._stop_camera()
-            LOGGER.debug("Stopping camera thread")
-            self._camera.stop()
-            self._camera.join()
 
     def _on_watchdog_fired(self):
         LOGGER.info("Watch dog fired")
@@ -487,7 +515,7 @@ class BambuClient:
         """Force refresh data"""
 
         if self._manual_refresh_mode:
-            self.connect(self.callback)
+            self.connect(self._callback)
         else:
             LOGGER.debug("Force Refresh: Getting Version Info")
             self._refreshed = True
@@ -531,8 +559,8 @@ class BambuClient:
         # Run the blocking tls_set method in a separate thread
         loop = asyncio.get_event_loop()
         await loop.run_in_executor(None, self.setup_tls)
-
+        
-        if self.local_mqtt:
+        if self._local_mqtt:
             self.client.username_pw_set("bblp", password=self._access_code)
         else:
             self.client.username_pw_set(self._username, password=self._auth_token)

octoprint_bambu_printer/printer/pybambu/bambu_cloud.py

@@ -1,13 +1,27 @@
 from __future__ import annotations
+from enum import (
+    Enum,
+)
 
 import base64
+import cloudscraper
 import json
+import requests
 
-curl_available = True
+class ConnectionMechanismEnum(Enum):
-try:
+    CLOUDSCRAPER = 1,
-    from curl_cffi import requests as curl_requests
+    CURL_CFFI = 2,
-except ImportError:
+    REQUESTS = 3
-    curl_available = False
+
+CONNECTION_MECHANISM = ConnectionMechanismEnum.CLOUDSCRAPER
+
+curl_available = False
+if CONNECTION_MECHANISM == ConnectionMechanismEnum.CURL_CFFI:
+    try:
+        from curl_cffi import requests as curl_requests
+        curl_available = True
+    except ImportError:
+        curl_available = False
 
 from dataclasses import dataclass
 
@@ -20,6 +34,36 @@ from .utils import get_Url
 
 IMPERSONATE_BROWSER='chrome'
 
+class CloudflareError(Exception):
+    def __init__(self):
+        super().__init__("Blocked by Cloudflare")
+        self.error_code = 403
+
+class EmailCodeRequiredError(Exception):
+    def __init__(self):
+        super().__init__("Email code required")
+        self.error_code = 400
+
+class EmailCodeExpiredError(Exception):
+    def __init__(self):
+        super().__init__("Email code expired")
+        self.error_code = 400
+
+class EmailCodeIncorrectError(Exception):
+    def __init__(self):
+        super().__init__("Email code incorrect")
+        self.error_code = 400
+
+class TfaCodeRequiredError(Exception):
+    def __init__(self):
+        super().__init__("Two factor authentication code required")
+        self.error_code = 400
+
+class CurlUnavailableError(Exception):
+    def __init__(self):
+        super().__init__("curl library unavailable")
+        self.error_code = 400
+
 @dataclass
 class BambuCloud:
   
@@ -30,16 +74,101 @@ class BambuCloud:
         self._auth_token = auth_token
         self._tfaKey = None
 
+    def _get_headers(self):
+        return {
+            'User-Agent': 'bambu_network_agent/01.09.05.01',
+            'X-BBL-Client-Name': 'OrcaSlicer',
+            'X-BBL-Client-Type': 'slicer',
+            'X-BBL-Client-Version': '01.09.05.51',
+            'X-BBL-Language': 'en-US',
+            'X-BBL-OS-Type': 'linux',
+            'X-BBL-OS-Version': '6.2.0',
+            'X-BBL-Agent-Version': '01.09.05.01',
+            'X-BBL-Executable-info': '{}',
+            'X-BBL-Agent-OS-Type': 'linux',
+            'accept': 'application/json',
+            'Content-Type': 'application/json'
+        }
+        # Orca/Bambu Studio also add this - need to work out what an appropriate ID is to put here:
+        # 'X-BBL-Device-ID': BBL_AUTH_UUID,
+        # Example: X-BBL-Device-ID: 370f9f43-c6fe-47d7-aec9-5fe5ef7e7673
+
     def _get_headers_with_auth_token(self) -> dict:
-        headers = {}
+        if CONNECTION_MECHANISM == ConnectionMechanismEnum.CURL_CFFI:
+            headers = {}
+        else:
+            headers = self._get_headers()
         headers['Authorization'] = f"Bearer {self._auth_token}"
         return headers
-    
+
-    def _get_authentication_token(self) -> dict:
+    def _test_response(self, response, return400=False):
+        # Check specifically for cloudflare block
+        if response.status_code == 403 and 'cloudflare' in response.text:
+            LOGGER.debug("BLOCKED BY CLOUDFLARE")
+            raise CloudflareError()
+
+        if response.status_code == 400 and not return400:
+            LOGGER.error(f"Connection failed with error code: {response.status_code}")
+            LOGGER.debug(f"Response: '{response.text}'")
+            raise PermissionError(response.status_code, response.text)
+
+        if response.status_code > 400:
+            LOGGER.error(f"Connection failed with error code: {response.status_code}")
+            LOGGER.debug(f"Response: '{response.text}'")
+            raise PermissionError(response.status_code, response.text)
+
+        LOGGER.debug(f"Response: {response.status_code}")
+
+    def _get(self, urlenum: BambuUrl):
+        url = get_Url(urlenum, self._region)
+        headers=self._get_headers_with_auth_token()
+        if CONNECTION_MECHANISM == ConnectionMechanismEnum.CURL_CFFI:
+            if not curl_available:
+                LOGGER.debug(f"Curl library is unavailable.")
+                raise CurlUnavailableError()
+            response = curl_requests.get(url, headers=headers, timeout=10, impersonate=IMPERSONATE_BROWSER)
+        elif CONNECTION_MECHANISM == ConnectionMechanismEnum.CLOUDSCRAPER:
+            if len(headers) == 0:
+                headers = self._get_headers()
+            scraper = cloudscraper.create_scraper()
+            response = scraper.get(url, headers=headers, timeout=10)
+        elif CONNECTION_MECHANISM == ConnectionMechanismEnum.REQUESTS:
+            if len(headers) == 0:
+                headers = self._get_headers()
+            response = requests.get(url, headers=headers, timeout=10)
+        else:
+            raise NotImplementedError()
+
+        self._test_response(response)
+
+        return response
+
+
+    def _post(self, urlenum: BambuUrl, json: str, headers={}, return400=False):
+        url = get_Url(urlenum, self._region)
+        if CONNECTION_MECHANISM == ConnectionMechanismEnum.CURL_CFFI:
+            if not curl_available:
+                LOGGER.debug(f"Curl library is unavailable.")
+                raise CurlUnavailableError()
+            response = curl_requests.post(url, headers=headers, json=json, impersonate=IMPERSONATE_BROWSER)
+        elif CONNECTION_MECHANISM == ConnectionMechanismEnum.CLOUDSCRAPER:
+            if len(headers) == 0:
+                headers = self._get_headers()
+            scraper = cloudscraper.create_scraper()
+            response = scraper.post(url, headers=headers, json=json)
+        elif CONNECTION_MECHANISM == ConnectionMechanismEnum.REQUESTS:
+            if len(headers) == 0:
+                headers = self._get_headers()
+            response = requests.post(url, headers=headers, json=json)
+        else:
+            raise NotImplementedError()
+
+        self._test_response(response, return400)
+        
+        return response
+
+    def _get_authentication_token(self) -> str:
         LOGGER.debug("Getting accessToken from Bambu Cloud")
-        if not curl_available:
-            LOGGER.debug(f"Curl library is unavailable.")
-            return 'curlUnavailable'
 
         # First we need to find out how Bambu wants us to login.
         data = {
@@ -48,20 +177,7 @@ class BambuCloud:
             "apiError": ""
         }
 
-        response = curl_requests.post(get_Url(BambuUrl.LOGIN, self._region), json=data, impersonate=IMPERSONATE_BROWSER)
+        response = self._post(BambuUrl.LOGIN, json=data)
-
-        # Check specifically for cloudflare block
-        if response.status_code == 403:
-            if 'cloudflare' in response.text:
-                LOGGER.error('CloudFlare blocked connection attempt')
-                return 'cloudFlare'
-            
-        if response.status_code >= 400:
-            LOGGER.error(f"Login attempt failed with error code: {response.status_code}")
-            LOGGER.debug(f"Response: '{response.text}'")
-            raise ValueError(response.status_code)
-
-        LOGGER.debug(f"Response: {response.status_code}")
 
         auth_json = response.json()
         accessToken = auth_json.get('accessToken', '')
@@ -73,18 +189,19 @@ class BambuCloud:
         if loginType is None:
             LOGGER.error(f"loginType not present")
             LOGGER.error(f"Response not understood: '{response.text}'")
-            return None
+            return ValueError(0) # FIXME
         elif loginType == 'verifyCode':
             LOGGER.debug(f"Received verifyCode response")
+            raise EmailCodeRequiredError()
         elif loginType == 'tfa':
             # Store the tfaKey for later use
             LOGGER.debug(f"Received tfa response")
             self._tfaKey = auth_json.get("tfaKey")
+            raise TfaCodeRequiredError()
         else:
             LOGGER.debug(f"Did not understand json. loginType = '{loginType}'")
             LOGGER.error(f"Response not understood: '{response.text}'")
-
+            return ValueError(1) # FIXME
-        return loginType
     
     def _get_email_verification_code(self):
         # Send the verification code request
@@ -94,14 +211,8 @@ class BambuCloud:
         }
 
         LOGGER.debug("Requesting verification code")
-        response = curl_requests.post(get_Url(BambuUrl.EMAIL_CODE, self._region), json=data, impersonate=IMPERSONATE_BROWSER)
+        self._post(BambuUrl.EMAIL_CODE, json=data)
-        
+        LOGGER.debug("Verification code requested successfully.")
-        if response.status_code == 200:
-            LOGGER.debug("Verification code requested successfully.")
-        else:
-            LOGGER.error(f"Received error trying to send verification code: {response.status_code}")
-            LOGGER.debug(f"Response: '{response.text}'")
-            raise ValueError(response.status_code)
 
     def _get_authentication_token_with_verification_code(self, code) -> dict:
         LOGGER.debug("Attempting to connect with provided verification code.")
@@ -110,27 +221,24 @@ class BambuCloud:
             "code": code
         }
 
-        response = curl_requests.post(get_Url(BambuUrl.LOGIN, self._region), json=data, impersonate=IMPERSONATE_BROWSER)
+        response = self._post(BambuUrl.LOGIN, json=data, return400=True)
+        status_code = response.status_code
 
-        LOGGER.debug(f"Response: {response.status_code}")
+        if status_code == 200:
-        if response.status_code == 200:
             LOGGER.debug("Authentication successful.")
-        elif response.status_code == 400:
+            LOGGER.debug(f"Response = '{response.json()}'")
-            LOGGER.debug(f"Response: '{response.json()}'")
+        elif status_code == 400:
+            LOGGER.debug(f"Received response: {response.json()}")           
             if response.json()['code'] == 1:
                 # Code has expired. Request a new one.
                 self._get_email_verification_code()
-                return 'codeExpired'
+                raise EmailCodeExpiredError()
             elif response.json()['code'] == 2:
                 # Code was incorrect. Let the user try again.
-                return 'codeIncorrect'
+                raise EmailCodeIncorrectError()
             else:
                 LOGGER.error(f"Response not understood: '{response.json()}'")
                 raise ValueError(response.json()['code'])
-        else:
-            LOGGER.error(f"Received error trying to authenticate with verification code: {response.status_code}")
-            LOGGER.debug(f"Response: '{response.text}'")
-            raise ValueError(response.status_code)
 
         return response.json()['accessToken']
     
@@ -142,30 +250,57 @@ class BambuCloud:
             "tfaCode": code
         }
 
-        response = curl_requests.post(get_Url(BambuUrl.TFA_LOGIN, self._region), json=data, impersonate=IMPERSONATE_BROWSER)
+        response = self._post(BambuUrl.TFA_LOGIN, json=data)
 
         LOGGER.debug(f"Response: {response.status_code}")
         if response.status_code == 200:
             LOGGER.debug("Authentication successful.")
-        else:
-            LOGGER.error(f"Received error trying to authenticate with verification code: {response.status_code}")
-            LOGGER.debug(f"Response: '{response.text}'")
-            raise ValueError(response.status_code)
 
         cookies = response.cookies.get_dict()
         token_from_tfa = cookies.get("token")
-        LOGGER.debug(f"token_from_tfa: {token_from_tfa}")
+        #LOGGER.debug(f"token_from_tfa: {token_from_tfa}")
 
         return token_from_tfa
     
     def _get_username_from_authentication_token(self) -> str:
+        LOGGER.debug("Trying to get username from authentication token.")
         # User name is in 2nd portion of the auth token (delimited with periods)
-        b64_string = self._auth_token.split(".")[1]
+        username = None
-        # String must be multiples of 4 chars in length. For decode pad with = character
+        tokens = self._auth_token.split(".")
-        b64_string += "=" * ((4 - len(b64_string) % 4) % 4)
+        if len(tokens) != 3:
-        jsonAuthToken = json.loads(base64.b64decode(b64_string))
+            LOGGER.debug("Received authToken is not a JWT.")
-        # Gives json payload with "username":"u_<digits>" within it
+            LOGGER.debug("Trying to use project API to retrieve username instead")
-        return jsonAuthToken['username']
+            response = self.get_projects();
+            if response is not None:
+                projectsnode = response.get('projects', None)
+                if projectsnode is None:
+                    LOGGER.debug("Failed to find projects node")
+                else:
+                    if len(projectsnode) == 0:
+                        LOGGER.debug("No projects node in response")
+                    else:
+                        project=projectsnode[0]
+                        if project.get('user_id', None) is None:
+                            LOGGER.debug("No user_id entry")
+                        else:
+                            username = f"u_{project['user_id']}"
+                            LOGGER.debug(f"Found user_id of {username}")
+        else:
+            LOGGER.debug("Authentication token looks to be a JWT")
+            try:
+                b64_string = self._auth_token.split(".")[1]
+                # String must be multiples of 4 chars in length. For decode pad with = character
+                b64_string += "=" * ((4 - len(b64_string) % 4) % 4)
+                jsonAuthToken = json.loads(base64.b64decode(b64_string))
+                # Gives json payload with "username":"u_<digits>" within it
+                username = jsonAuthToken.get('username', None)
+            except:
+                LOGGER.debug("Unable to decode authToken to json to retrieve username.")
+
+        if username is None:
+            LOGGER.debug(f"Unable to decode authToken to retrieve username. AuthToken = {self._auth_token}")
+
+        return username
     
     # Retrieves json description of devices in the form:
     # {
@@ -182,7 +317,7 @@ class BambuCloud:
     #             'dev_product_name': 'P1S',
     #             'dev_access_code': 'REDACTED',
     #             'nozzle_diameter': 0.4
-    #             },
+    #         },
     #         {
     #             'dev_id': 'REDACTED',
     #             'name': 'Bambu P1P',
@@ -192,7 +327,7 @@ class BambuCloud:
     #             'dev_product_name': 'P1P',
     #             'dev_access_code': 'REDACTED',
     #             'nozzle_diameter': 0.4
-    #             },
+    #         },
     #         {
     #             'dev_id': 'REDACTED',
     #             'name': 'Bambu X1C',
@@ -202,7 +337,7 @@ class BambuCloud:
     #             'dev_product_name': 'X1 Carbon',
     #             'dev_access_code': 'REDACTED',
     #             'nozzle_diameter': 0.4
-    #             }
+    #         }
     #     ]
     # }
     
@@ -223,49 +358,25 @@ class BambuCloud:
         self._password = password
 
         result = self._get_authentication_token()
-        if result is None:
+        self._auth_token = result
-            LOGGER.error("Unable to authenticate.")
+        self._username = self._get_username_from_authentication_token()
-            return None
-        elif len(result) < 20:
-            return result
-        else:
-            self._auth_token = result
-            self._username = self._get_username_from_authentication_token()
-            return 'success'
         
     def login_with_verification_code(self, code: str):
         result = self._get_authentication_token_with_verification_code(code)
-        if len(result) < 20:
-            return result
         self._auth_token = result
         self._username = self._get_username_from_authentication_token()
-        return 'success'
 
     def login_with_2fa_code(self, code: str):
         result = self._get_authentication_token_with_2fa_code(code)
-        if len(result) < 20:
-            return result
         self._auth_token = result
         self._username = self._get_username_from_authentication_token()
-        return 'success'
 
     def get_device_list(self) -> dict:
         LOGGER.debug("Getting device list from Bambu Cloud")
-        if not curl_available:
+        try:
-            LOGGER.debug(f"Curl library is unavailable.")
+            response = self._get(BambuUrl.BIND)
-            raise None
+        except:
-        
+            return None
-        response = curl_requests.get(get_Url(BambuUrl.BIND, self._region), headers=self._get_headers_with_auth_token(), timeout=10, impersonate=IMPERSONATE_BROWSER)
-        if response.status_code == 403:
-            if 'cloudflare' in response.text:
-                LOGGER.error('CloudFlare blocked connection attempt')
-            raise ValueError(response.status_code)
-
-        if response.status_code >= 400:
-            LOGGER.debug(f"Received error: {response.status_code}")
-            LOGGER.error(f"Received error: '{response.text}'")
-            raise ValueError(response.status_code)
-        
         return response.json()['devices']
 
     # The slicer settings are of the following form:
@@ -336,23 +447,13 @@ class BambuCloud:
     # }
 
     def get_slicer_settings(self) -> dict:
-        LOGGER.debug("DISABLED: Getting slicer settings from Bambu Cloud")
+        LOGGER.debug("Getting slicer settings from Bambu Cloud")
-        # Disabled for now since it may be contributing to cloudflare detection speed.
+        try:
-        # 
+            response = self._get(BambuUrl.SLICER_SETTINGS)
-        # if curl_available:
+        except:
-        #     response = curl_requests.get(get_Url(BambuUrl.SLICER_SETTINGS, self._region), headers=self._get_headers_with_auth_token(), timeout=10, impersonate=IMPERSONATE_BROWSER)
+            return None
-        #     if response.status_code == 403:
+        LOGGER.debug("Succeeded")
-        #         if 'cloudflare' in response.text:
+        return response.json()
-        #             LOGGER.error(f"Cloudflare blocked slicer settings lookup.")
-        #             return None
-                
-        #     if response.status_code >= 400:
-        #         LOGGER.error(f"Slicer settings load failed: {response.status_code}")
-        #         LOGGER.error(f"Slicer settings load failed: '{response.text}'")
-        #         return None
-            
-        #     return response.json()
-        return None
         
     # The task list is of the following form with a 'hits' array with typical 20 entries.
     #
@@ -398,28 +499,37 @@ class BambuCloud:
 
     def get_tasklist(self) -> dict:
         LOGGER.debug("Getting full task list from Bambu Cloud")
-        if not curl_available:
+        try:
-            LOGGER.debug(f"Curl library is unavailable.")
+            response = self._get(BambuUrl.TASKS)
-            raise None
+        except:
-        
+            return None
-        url = get_Url(BambuUrl.TASKS, self._region)
+        return response.json()
-        response = curl_requests.get(url, headers=self._get_headers_with_auth_token(), timeout=10, impersonate=IMPERSONATE_BROWSER)
-        if response.status_code == 403:
-            if 'cloudflare' in response.text:
-                LOGGER.error('CloudFlare blocked connection attempt')
-                return None
-
-        # Check specifically for cloudflare block
-        if response.status_code == 403:
-            if 'cloudflare' in response.text:
-                LOGGER.error('CloudFlare blocked connection attempt')
-                return None
-
-        if response.status_code >= 400:
-            LOGGER.debug(f"Received error: {response.status_code}")
-            LOGGER.debug(f"Received error: '{response.text}'")
-            raise None
 
+    # Returns a list of projects for the account.
+    #
+    # {
+    # "message": "success",
+    # "code": null,
+    # "error": null,
+    # "projects": [
+    #     {
+    #     "project_id": "164995388",
+    #     "user_id": "1688388450",
+    #     "model_id": "US48e2103d939bf8",
+    #     "status": "ACTIVE",
+    #     "name": "Alcohol_Marker_Storage_for_Copic,_Ohuhu_and_the_like",
+    #     "content": "{'printed_plates': [{'plate': 1}]}",
+    #     "create_time": "2024-11-17 06:12:33",
+    #     "update_time": "2024-11-17 06:12:40"
+    #     },
+    #     ...
+    #
+    def get_projects(self) -> dict:
+        LOGGER.debug("Getting projects list from Bambu Cloud")
+        try:
+            response = self._get(BambuUrl.PROJECTS)
+        except:
+            return None
         return response.json()
 
     def get_latest_task_for_printer(self, deviceId: str) -> dict:
@@ -429,11 +539,9 @@ class BambuCloud:
             if len(data) != 0:
                 return data[0]
             LOGGER.debug("No tasks found for printer")
-        except:
-            LOGGER.debug("Unable to make call")
             return None
-            
+        except:
-        return None
+            return None
 
     def get_tasklist_for_printer(self, deviceId: str) -> dict:
         LOGGER.debug(f"Getting full task list for printer from Bambu Cloud")
@@ -451,21 +559,11 @@ class BambuCloud:
 
     def download(self, url: str) -> bytearray:
         LOGGER.debug(f"Downloading cover image: {url}")
-        if not curl_available:
+        try:
-            LOGGER.debug(f"Curl library is unavailable.")
+            # This is just a standard download from an unauthenticated end point.
+            response = requests.get(url)
+        except:
             return None
-
-        response = curl_requests.get(url, timeout=10, impersonate=IMPERSONATE_BROWSER)
-        if response.status_code == 403:
-            if 'cloudflare' in response.text:
-                LOGGER.error('CloudFlare blocked connection attempt')
-                raise ValueError(response.status_code)
-
-        if response.status_code >= 400:
-            LOGGER.debug(f"Received error: {response.status_code}")
-            LOGGER.debug(f"Received error: {response.text}")
-            raise ValueError(response.status_code)
-        
         return response.content
 
     @property

octoprint_bambu_printer/printer/pybambu/filaments.json

@@ -15,6 +15,7 @@
     "GFB01": "Bambu ASA",
     "GFB02": "Bambu ASA-Aero",
     "GFB50": "Bambu ABS-GF",
+    "GFB51": "Bambu ASA-CF",
     "GFB60": "PolyLite ABS",
     "GFB61": "PolyLite ASA",
     "GFB98": "Generic ASA",
@@ -26,6 +27,7 @@
     "GFG02": "Bambu PETG HF",
     "GFG50": "Bambu PETG-CF",
     "GFG60": "PolyLite PETG",
+    "GFG96": "Generic PETG HF",
     "GFG97": "Generic PCTG",
     "GFG98": "Generic PETG-CF",
     "GFG99": "Generic PETG",
@@ -34,6 +36,13 @@
     "GFL03": "eSUN PLA+",
     "GFL04": "Overture PLA",
     "GFL05": "Overture Matte PLA",
+    "GFL06": "Fiberon PETG-ESD",
+    "GFL50": "Fiberon PA6-CF",
+    "GFL51": "Fiberon PA6-GF",
+    "GFL52": "Fiberon PA12-CF",
+    "GFL53": "Fiberon PA612-CF",
+    "GFL54": "Fiberon PET-CF",
+    "GFL55": "Fiberon PETG-rCF",
     "GFL95": "Generic PLA High Speed",
     "GFL96": "Generic PLA Silk",
     "GFL98": "Generic PLA-CF",
@@ -41,6 +50,7 @@
     "GFN03": "Bambu PA-CF",
     "GFN04": "Bambu PAHT-CF",
     "GFN05": "Bambu PA6-CF",
+    "GFN06": "Bambu PPA-CF",
     "GFN08": "Bambu PA6-GF",
     "GFN96": "Generic PPA-GF",
     "GFN97": "Generic PPA-CF",
@@ -64,9 +74,12 @@
     "GFS98": "Generic HIPS",
     "GFS99": "Generic PVA",
     "GFT01": "Bambu PET-CF",
+    "GFT02": "Bambu PPS-CF",
     "GFT97": "Generic PPS",
     "GFT98": "Generic PPS-CF",
     "GFU00": "Bambu TPU 95A HF",
     "GFU01": "Bambu TPU 95A",
+    "GFU02": "Bambu TPU for AMS",
+    "GFU98": "Generic TPU for AMS",
     "GFU99": "Generic TPU"
-}
+}

octoprint_bambu_printer/printer/pybambu/models.py

@@ -22,6 +22,7 @@ from .utils import (
     get_generic_AMS_HMS_error_code,
     get_HMS_severity,
     get_HMS_module,
+    set_temperature_to_gcode,
 )
 from .const import (
     LOGGER,
@@ -32,6 +33,7 @@ from .const import (
     SPEED_PROFILE,
     GCODE_STATE_OPTIONS,
     PRINT_TYPE_OPTIONS,
+    TempEnum,
 )
 from .commands import (
     CHAMBER_LIGHT_ON,
@@ -42,7 +44,7 @@ from .commands import (
 class Device:
     def __init__(self, client):
         self._client = client
-        self.temperature = Temperature()
+        self.temperature = Temperature(client = client)
         self.lights = Lights(client = client)
         self.info = Info(client = client)
         self.print_job = PrintJob(client = client)
@@ -53,7 +55,7 @@ class Device:
         self.external_spool = ExternalSpool(client = client)
         self.hms = HMSList(client = client)
         self.print_error = PrintErrorList(client = client)
-        self.camera = Camera()
+        self.camera = Camera(client = client)
         self.home_flag = HomeFlag(client=client)
         self.push_all_data = None
         self.get_version_data = None
@@ -77,8 +79,7 @@ class Device:
         send_event = send_event | self.camera.print_update(data = data)
         send_event = send_event | self.home_flag.print_update(data = data)
 
-        if send_event and self._client.callback is not None:
+        self._client.callback("event_printer_data_update")
-            self._client.callback("event_printer_data_update")
 
         if data.get("msg", 0) == 0:
             self.push_all_data = data
@@ -90,6 +91,16 @@ class Device:
         if data.get("command") == "get_version":
             self.get_version_data = data
 
+    def _supports_temperature_set(self):
+        # When talking to the Bambu cloud mqtt, setting the temperatures is allowed.
+        if self.info.mqtt_mode == "bambu_cloud":
+            return True
+        # X1* have not yet blocked setting the temperatures when in nybrid connection mode.
+        if self.info.device_type == "X1" or self.info.device_type == "X1C" or self.info.device_type == "X1E":
+            return True
+        # What's left is P1 and A1 printers that we are connecting by local mqtt. These are supported only in pure Lan Mode.
+        return not self._client.bambu_cloud.bambu_connected
+
     def supports_feature(self, feature):
         if feature == Features.AUX_FAN:
             return self.info.device_type != "A1" and self.info.device_type != "A1MINI"
@@ -126,9 +137,11 @@ class Device:
         elif feature == Features.AMS_FILAMENT_REMAINING:
             # Technically this is not the AMS Lite but that's currently tied to only these printer types.
             return self.info.device_type != "A1" and self.info.device_type != "A1MINI"
+        elif feature == Features.SET_TEMPERATURE:
+            return self._supports_temperature_set()
 
         return False
-
+    
     def get_active_tray(self):
         if self.supports_feature(Features.AMS):
             if self.ams.tray_now == 255:
@@ -179,21 +192,19 @@ class Lights:
         self.work_light = \
             search(data.get("lights_report", []), lambda x: x.get('node', "") == "work_light",
                    {"mode": self.work_light}).get("mode")
-
+        
         return (old_data != f"{self.__dict__}")
 
     def TurnChamberLightOn(self):
         self.chamber_light = "on"
         self.chamber_light_override = "on"
-        if self._client.callback is not None:
+        self._client.callback("event_light_update")
-            self._client.callback("event_light_update")
         self._client.publish(CHAMBER_LIGHT_ON)
 
     def TurnChamberLightOff(self):
         self.chamber_light = "off"
         self.chamber_light_override = "off"
-        if self._client.callback is not None:
+        self._client.callback("event_light_update")
-            self._client.callback("event_light_update")
         self._client.publish(CHAMBER_LIGHT_OFF)
 
 
@@ -205,7 +216,8 @@ class Camera:
     rtsp_url: str
     timelapse: str
 
-    def __init__(self):
+    def __init__(self, client):
+        self._client = client
         self.recording = ''
         self.resolution = ''
         self.rtsp_url = None
@@ -227,8 +239,11 @@ class Camera:
         self.timelapse = data.get("ipcam", {}).get("timelapse", self.timelapse)
         self.recording = data.get("ipcam", {}).get("ipcam_record", self.recording)
         self.resolution = data.get("ipcam", {}).get("resolution", self.resolution)
-        self.rtsp_url = data.get("ipcam", {}).get("rtsp_url", self.rtsp_url)
+        if self._client._enable_camera:
-
+            self.rtsp_url = data.get("ipcam", {}).get("rtsp_url", self.rtsp_url)
+        else:
+            self.rtsp_url = None
+        
         return (old_data != f"{self.__dict__}")
 
 @dataclass
@@ -240,7 +255,8 @@ class Temperature:
     nozzle_temp: int
     target_nozzle_temp: int
 
-    def __init__(self):
+    def __init__(self, client):
+        self._client = client
         self.bed_temp = 0
         self.target_bed_temp = 0
         self.chamber_temp = 0
@@ -255,9 +271,23 @@ class Temperature:
         self.chamber_temp = round(data.get("chamber_temper", self.chamber_temp))
         self.nozzle_temp = round(data.get("nozzle_temper", self.nozzle_temp))
         self.target_nozzle_temp = round(data.get("nozzle_target_temper", self.target_nozzle_temp))
-
+        
         return (old_data != f"{self.__dict__}")
 
+    def set_target_temp(self, temp: TempEnum, temperature: int):
+        command = set_temperature_to_gcode(temp, temperature)
+
+        # if type == TempEnum.HEATBED:
+        #     self.bed_temp = temperature
+        # elif type == TempEnum.NOZZLE:
+        #     self.nozzle_temp = temperature
+
+        LOGGER.debug(command)
+        self._client.publish(command)
+
+        self._client.callback("event_printer_data_update")
+
+
 @dataclass
 class Fans:
     """Return all fan related info"""
@@ -316,7 +346,7 @@ class Fans:
                 self._cooling_fan_speed_override_time = None
         self._heatbreak_fan_speed = data.get("heatbreak_fan_speed", self._heatbreak_fan_speed)
         self._heatbreak_fan_speed_percentage = fan_percentage(self._heatbreak_fan_speed)
-
+        
         return (old_data != f"{self.__dict__}")
 
     def set_fan_speed(self, fan: FansEnum, percentage: int):
@@ -337,8 +367,7 @@ class Fans:
         LOGGER.debug(command)
         self._client.publish(command)
 
-        if self._client.callback is not None:
+        self._client.callback("event_printer_data_update")
-            self._client.callback("event_printer_data_update")
 
     def get_fan_speed(self, fan: FansEnum) -> int:
         if fan == FansEnum.PART_COOLING:
@@ -483,8 +512,7 @@ class PrintJob:
         currently_idle = self.gcode_state == "IDLE" or self.gcode_state == "FAILED" or self.gcode_state == "FINISH"
 
         if previously_idle and not currently_idle:
-            if self._client.callback is not None:
+            self._client.callback("event_print_started")
-               self._client.callback("event_print_started")
 
             # Generate the start_time for P1P/S when printer moves from idle to another state. Original attempt with remaining time
             # becoming non-zero didn't work as it never bounced to zero in at least the scenario where a print was canceled.
@@ -508,20 +536,17 @@ class PrintJob:
         isCanceledPrint = False
         if data.get("print_error") == 50348044 and self.print_error == 0:
             isCanceledPrint = True
-            if self._client.callback is not None:
+            self._client.callback("event_print_canceled")
-               self._client.callback("event_print_canceled")
         self.print_error = data.get("print_error", self.print_error)
 
         # Handle print failed
         if previous_gcode_state != "unknown" and previous_gcode_state != "FAILED" and self.gcode_state == "FAILED":
             if not isCanceledPrint:
-                if self._client.callback is not None:
+                self._client.callback("event_print_failed")
-                   self._client.callback("event_print_failed")
 
         # Handle print finish
         if previous_gcode_state != "unknown" and previous_gcode_state != "FINISH" and self.gcode_state == "FINISH":
-            if self._client.callback is not None:
+            self._client.callback("event_print_finished")
-               self._client.callback("event_print_finished")
 
         if currently_idle and not previously_idle and previous_gcode_state != "unknown":
             if self.start_time != None:
@@ -666,7 +691,7 @@ class Info:
         self.sw_ver = "unknown"
         self.online = False
         self.new_version_state = 0
-        self.mqtt_mode = "local" if self._client.local_mqtt else "bambu_cloud"
+        self.mqtt_mode = "local" if self._client._local_mqtt else "bambu_cloud"
         self.nozzle_diameter = 0
         self.nozzle_type = "unknown"
         self.usage_hours = client._usage_hours
@@ -674,8 +699,7 @@ class Info:
     def set_online(self, online):
         if self.online != online:
             self.online = online
-            if self._client.callback is not None:
+            self._client.callback("event_printer_data_update")
-                self._client.callback("event_printer_data_update")
 
     def info_update(self, data):
 
@@ -704,8 +728,7 @@ class Info:
         LOGGER.debug(f"Device is {self.device_type}")
         self.hw_ver = get_hw_version(modules, self.hw_ver)
         self.sw_ver = get_sw_version(modules, self.sw_ver)
-        if self._client.callback is not None:
+        self._client.callback("event_printer_info_update")
-            self._client.callback("event_printer_info_update")
 
     def print_update(self, data) -> bool:
         old_data = f"{self.__dict__}"
@@ -866,7 +889,7 @@ class AMSList:
                 index = int(name[4])
             elif name.startswith("ams_f1/"):
                 index = int(name[7])
-
+            
             if index != -1:
                 # Sometimes we get incomplete version data. We have to skip if that occurs since the serial number is
                 # required as part of the home assistant device identity.
@@ -891,8 +914,7 @@ class AMSList:
         data_changed = data_changed or (old_data != f"{self.__dict__}")
 
         if data_changed:
-            if self._client.callback is not None:
+            self._client.callback("event_ams_info_update")
-                self._client.callback("event_ams_info_update")
 
     def print_update(self, data) -> bool:
         old_data = f"{self.__dict__}"
@@ -1041,7 +1063,7 @@ class AMSTray:
             self.tag_uid = data.get('tag_uid', self.tag_uid)
             self.tray_uuid = data.get('tray_uuid', self.tray_uuid)
             self.k = data.get('k', self.k)
-
+        
         return (old_data != f"{self.__dict__}")
 
 
@@ -1110,7 +1132,7 @@ class Speed:
         self._id = int(data.get("spd_lvl", self._id))
         self.name = get_speed_name(self._id)
         self.modifier = int(data.get("spd_mag", self.modifier))
-
+        
         return (old_data != f"{self.__dict__}")
 
     def SetSpeed(self, option: str):
@@ -1121,8 +1143,7 @@ class Speed:
                 command = SPEED_PROFILE_TEMPLATE
                 command['print']['param'] = f"{id}"
                 self._client.publish(command)
-                if self._client.callback is not None:
+                self._client.callback("event_speed_update")
-                    self._client.callback("event_speed_update")
 
 
 @dataclass
@@ -1162,7 +1183,7 @@ class HMSList:
         self._count = 0
         self._errors = {}
         self._errors["Count"] = 0
-
+        
     def print_update(self, data) -> bool:
         # Example payload:
         # "hms": [
@@ -1187,7 +1208,8 @@ class HMSList:
                 attr = int(hms['attr'])
                 code = int(hms['code'])
                 hms_notif = HMSNotification(attr=attr, code=code)
-                errors[f"{index}-Error"] = f"HMS_{hms_notif.hms_code}: {get_HMS_error_text(hms_notif.hms_code)}"
+                errors[f"{index}-Code"] = f"HMS_{hms_notif.hms_code}"
+                errors[f"{index}-Error"] = get_HMS_error_text(hms_notif.hms_code)
                 errors[f"{index}-Wiki"] = hms_notif.wiki_url
                 errors[f"{index}-Severity"] = hms_notif.severity
                 #LOGGER.debug(f"HMS error for '{hms_notif.module}' and severity '{hms_notif.severity}': HMS_{hms_notif.hms_code}")
@@ -1198,17 +1220,16 @@ class HMSList:
                 self._errors = errors
                 if self._count != 0:
                     LOGGER.warning(f"HMS ERRORS: {errors}")
-                if self._client.callback is not None:
+                self._client.callback("event_printer_error")
-                    self._client.callback("event_hms_errors")
                 return True
-
+        
         return False
-
+    
     @property
     def errors(self) -> dict:
         #LOGGER.debug(f"PROPERTYCALL: get_hms_errors")
         return self._errors
-
+    
     @property
     def error_count(self) -> int:
         return self._count
@@ -1217,16 +1238,14 @@ class HMSList:
 class PrintErrorList:
     """Return all print_error related info"""
     _error: dict
-    _count: int
 
     def __init__(self, client):
         self._error = None
-        self._count = 0
         self._client = client
-
+        
     def print_update(self, data) -> bool:
         # Example payload:
-        # "print_error": 117473286
+        # "print_error": 117473286 
         # So this is 07008006 which we make more human readable to 0700-8006
         # https://e.bambulab.com/query.php?lang=en
         # 'Unable to feed filament into the extruder. This could be due to entangled filament or a stuck spool. If not, please check if the AMS PTFE tube is connected.'
@@ -1238,22 +1257,21 @@ class PrintErrorList:
                 hex_conversion = f'0{int(print_error_code):x}'
                 print_error_code_hex = hex_conversion[slice(0,4,1)] + "_" + hex_conversion[slice(4,8,1)]
                 errors = {}
-                errors[f"Code"] = f"{print_error_code_hex.upper()}"
+                errors[f"code"] = print_error_code_hex.upper()
-                errors[f"Error"] = f"{print_error_code_hex.upper()}: {get_print_error_text(print_error_code)}"
+                errors[f"error"] = get_print_error_text(print_error_code)
                 # LOGGER.warning(f"PRINT ERRORS: {errors}") # This will emit a message to home assistant log every 1 second if enabled
 
             if self._error != errors:
                 self._error = errors
-                if self._client.callback is not None:
+                self._client.callback("event_print_error")
-                    self._client.callback("event_print_error")
 
         # We send the error event directly so always return False for the general data event.
         return False
-
+    
     @property
     def error(self) -> dict:
         return self._error
-
+    
     @property
     def on(self) -> int:
         return self._error is not None
@@ -1296,13 +1314,23 @@ class ChamberImage:
     def __init__(self, client):
         self._client = client
         self._bytes = bytearray()
+        self._image_last_updated = datetime.now()
 
     def set_jpeg(self, bytes):
         self._bytes = bytes
+        self._image_last_updated = datetime.now()
+        self._client.callback("event_printer_chamber_image_update")
 
     def get_jpeg(self) -> bytearray:
         return self._bytes.copy()
-
+    
+    def get_last_update_time(self) -> datetime:
+        return self._image_last_updated
+    
+    @property
+    def available(self):
+        return self._client._enable_camera 
+    
 @dataclass
 class CoverImage:
     """Returns the cover image from the Bambu API"""
@@ -1311,13 +1339,12 @@ class CoverImage:
         self._client = client
         self._bytes = bytearray()
         self._image_last_updated = datetime.now()
-        if self._client.callback is not None:
+        self._client.callback("event_printer_cover_image_update")
-            self._client.callback("event_printer_cover_image_update")
 
     def set_jpeg(self, bytes):
         self._bytes = bytes
         self._image_last_updated = datetime.now()
-
+    
     def get_jpeg(self) -> bytearray:
         return self._bytes
 
@@ -1330,7 +1357,7 @@ class HomeFlag:
     """Contains parsed _values from the homeflag sensor"""
     _value: int
     _sw_ver: str
-    _device_type: str
+    _device_type: str 
 
     def __init__(self, client):
         self._value = 0
@@ -1359,7 +1386,7 @@ class HomeFlag:
     def door_open_available(self) -> bool:
         if not self._client._device.supports_feature(Features.DOOR_SENSOR):
             return False
-
+        
         if (self._device_type in ["X1", "X1C"] and version.parse(self._sw_ver) < version.parse("01.07.00.00")):
             return False
 
@@ -1368,7 +1395,7 @@ class HomeFlag:
     @property
     def x_axis_homed(self) -> bool:
         return (self._value & Home_Flag_Values.X_AXIS) != 0
-
+    
     @property
     def y_axis_homed(self) -> bool:
         return (self._value & Home_Flag_Values.Y_AXIS) != 0
@@ -1404,7 +1431,7 @@ class HomeFlag:
     @property
     def sdcard_normal(self) -> bool:
         return self.sdcard_present and (self._value & Home_Flag_Values.HAS_SDCARD_ABNORMAL) != SdcardState.HAS_SDCARD_ABNORMAL
-
+    
     @property
     def ams_auto_switch_filament(self) -> bool:
         return (self._value & Home_Flag_Values.AMS_AUTO_SWITCH) != 0
@@ -1420,11 +1447,11 @@ class HomeFlag:
     @property
     def supports_motor_noise_calibration(self) -> bool:
         return (self._value & Home_Flag_Values.SUPPORTS_MOTOR_CALIBRATION) != 0
-
+    
     @property
     def p1s_upgrade_supported(self) -> bool:
         return (self._value & Home_Flag_Values.SUPPORTED_PLUS) !=  0
-
+    
     @property
     def p1s_upgrade_installed(self) -> bool:
         return (self._value & Home_Flag_Values.INSTALLED_PLUS) !=  0
@@ -1449,7 +1476,7 @@ class SlicerSettings:
 
     def update(self):
         self.custom_filaments = {}
-        if self._client.bambu_cloud.auth_token != "" and self._client.local_mqtt is False:
+        if self._client.bambu_cloud.auth_token != "":
             LOGGER.debug("Loading slicer settings")
             slicer_settings = self._client.bambu_cloud.get_slicer_settings()
             if slicer_settings is not None:

octoprint_bambu_printer/printer/pybambu/utils.py

@@ -11,8 +11,9 @@ from .const import (
     HMS_SEVERITY_LEVELS,
     HMS_MODULES,
     LOGGER,
+    BAMBU_URL,
     FansEnum,
-    BAMBU_URL
+    TempEnum
 )
 from .commands import SEND_GCODE_TEMPLATE
 
@@ -49,6 +50,18 @@ def fan_percentage_to_gcode(fan: FansEnum, percentage: int):
     return command
 
 
+def set_temperature_to_gcode(temp: TempEnum, temperature: int):
+    """Converts a temperature to the gcode command to set that"""
+    if temp == TempEnum.NOZZLE:
+        tempCommand = "M104"
+    elif temp == TempEnum.HEATBED:
+        tempCommand = "M140"
+
+    command = SEND_GCODE_TEMPLATE
+    command['print']['param'] = f"{tempCommand} S{temperature}\n"
+    return command
+
+
 def to_whole(number):
     if not number:
         return 0

setup.py

@@ -14,7 +14,7 @@ plugin_package = "octoprint_bambu_printer"
 plugin_name = "OctoPrint-BambuPrinter"
 
 # The plugin's version. Can be overwritten within OctoPrint's internal data via __plugin_version__ in the plugin module
-plugin_version = "0.1.8rc11"
+plugin_version = "0.1.8rc12"
 
 # The plugin's description. Can be overwritten within OctoPrint's internal data via __plugin_description__ in the plugin
 # module
@@ -33,7 +33,7 @@ plugin_url = "https://github.com/jneilliii/OctoPrint-BambuPrinter"
 plugin_license = "AGPLv3"
 
 # Any additional requirements besides OctoPrint should be listed here
-plugin_requires = ["paho-mqtt<2", "python-dateutil", "curl_cffi"]
+plugin_requires = ["paho-mqtt<2", "python-dateutil", "cloudscraper"]
 
 ### --------------------------------------------------------------------------------------------------------------------
 ### More advanced options that you usually shouldn't have to touch follow after this point