4706152022
Introduces a spoolman healthcheck that is executed every 60 seconds. Also fixes a bug with the periodic wifi update.
82 lines
2.6 KiB
C
82 lines
2.6 KiB
C
#ifndef CONFIG_H
|
|
#define CONFIG_H
|
|
|
|
#include <Arduino.h>
|
|
|
|
#define BAMBU_DEFAULT_AUTOSEND_TIME 60
|
|
|
|
#define NVS_NAMESPACE_API "api"
|
|
#define NVS_KEY_SPOOLMAN_URL "spoolmanUrl"
|
|
#define NVS_KEY_OCTOPRINT_ENABLED "octoEnabled"
|
|
#define NVS_KEY_OCTOPRINT_URL "octoUrl"
|
|
#define NVS_KEY_OCTOPRINT_TOKEN "octoToken"
|
|
|
|
#define NVS_NAMESPACE_BAMBU "bambu"
|
|
#define NVS_KEY_BAMBU_IP "bambuIp"
|
|
#define NVS_KEY_BAMBU_ACCESSCODE "bambuCode"
|
|
#define NVS_KEY_BAMBU_SERIAL "bambuSerial"
|
|
#define NVS_KEY_BAMBU_AUTOSEND_ENABLE "autosendEnable"
|
|
#define NVS_KEY_BAMBU_AUTOSEND_TIME "autosendTime"
|
|
|
|
#define NVS_NAMESPACE_SCALE "scale"
|
|
#define NVS_KEY_CALIBRATION "cal_value"
|
|
#define NVS_KEY_AUTOTARE "auto_tare"
|
|
#define SCALE_DEFAULT_CALIBRATION_VALUE 430.0f;
|
|
|
|
#define BAMBU_USERNAME "bblp"
|
|
|
|
#define OLED_RESET -1 // Reset pin # (or -1 if sharing Arduino reset pin)
|
|
#define SCREEN_ADDRESS 0x3CU // See datasheet for Address; 0x3D for 128x64, 0x3C for 128x32
|
|
#define SCREEN_WIDTH 128U
|
|
#define SCREEN_HEIGHT 64U
|
|
#define SCREEN_TOP_BAR_HEIGHT 16U
|
|
#define SCREEN_PROGRESS_BAR_HEIGHT 12U
|
|
#define DISPLAY_BOOT_TEXT "FilaMan"
|
|
|
|
#define WIFI_CHECK_INTERVAL 60000U
|
|
#define DISPLAY_UPDATE_INTERVAL 1000U
|
|
#define SPOOLMAN_HEALTHCHECK_INTERVAL 60000U
|
|
|
|
extern const uint8_t PN532_IRQ;
|
|
extern const uint8_t PN532_RESET;
|
|
|
|
extern const uint8_t LOADCELL_DOUT_PIN;
|
|
extern const uint8_t LOADCELL_SCK_PIN;
|
|
extern const uint8_t calVal_eepromAdress;
|
|
extern const uint16_t SCALE_LEVEL_WEIGHT;
|
|
|
|
extern const uint8_t TTP223_PIN;
|
|
|
|
extern const uint8_t OLED_TOP_START;
|
|
extern const uint8_t OLED_TOP_END;
|
|
extern const uint8_t OLED_DATA_START;
|
|
extern const uint8_t OLED_DATA_END;
|
|
|
|
extern const char* apiUrl;
|
|
extern const uint8_t webserverPort;
|
|
|
|
|
|
|
|
extern const unsigned char wifi_on[];
|
|
extern const unsigned char wifi_off[];
|
|
extern const unsigned char cloud_on[];
|
|
extern const unsigned char cloud_off[];
|
|
|
|
extern const unsigned char icon_failed[];
|
|
extern const unsigned char icon_success[];
|
|
extern const unsigned char icon_transfer[];
|
|
extern const unsigned char icon_loading[];
|
|
|
|
extern uint8_t rfidTaskCore;
|
|
extern uint8_t rfidTaskPrio;
|
|
|
|
extern uint8_t rfidWriteTaskPrio;
|
|
|
|
extern uint8_t mqttTaskCore;
|
|
extern uint8_t mqttTaskPrio;
|
|
|
|
extern uint8_t scaleTaskCore;
|
|
extern uint8_t scaleTaskPrio;
|
|
|
|
extern uint16_t defaultScaleCalibrationValue;
|
|
#endif |