docs: update changelog and header for version v2.0.4

CHANGELOG.md

@@ -1,5 +1,150 @@
 # Changelog
 
+## [2.0.4] - 2025-09-02
+### Changed
+- filter out automatic release documentation commits in changelog categorization
+- disable auto tare and weight filter reset in scale loop
+
+
+## [2.0.3] - 2025-09-02
+### Added
+- add updateOctoSpoolId for OctoPrint integration and change autoSetToBambuSpoolId type to uint16_t
+
+### Changed
+- update platformio.ini for version v2.0.3
+- update changelog and header for version v2.0.2-beta6
+- update platformio.ini for beta version v2.0.2-beta6
+- update changelog and header for version v2.0.2-beta5
+- update platformio.ini for beta version v2.0.2-beta5
+- update changelog and header for version v2.0.2-beta4
+- update platformio.ini for beta version v2.0.2-beta4
+- update changelog and header for version v2.0.2-beta3
+- update platformio.ini for beta version v2.0.2-beta3
+- update changelog and header for version v2.0.2-beta2
+- update platformio.ini for beta version v2.0.2-beta2
+- update changelog and header for version v2.0.2-beta1
+- update platformio.ini for beta version v2.0.2-beta1
+
+### Fixed
+- set scale tare request to true in setup function
+- correct assignment operator in scale tare request handling
+- correct tare scale request handling in tareScale function
+- reset weight filter after tare scale operation
+- correct tare scale function to set scaleTareRequest flag
+- reset weight counter logic and update spool ID in loop function
+- reduce delay in start_scale function and reset weight after tare
+
+
+## [2.0.2-beta6] - 2025-09-02
+### Added
+- add updateOctoSpoolId for OctoPrint integration and change autoSetToBambuSpoolId type to uint16_t
+
+### Changed
+- update platformio.ini for beta version v2.0.2-beta6
+- update changelog and header for version v2.0.2-beta5
+- update platformio.ini for beta version v2.0.2-beta5
+- update changelog and header for version v2.0.2-beta4
+- update platformio.ini for beta version v2.0.2-beta4
+- update changelog and header for version v2.0.2-beta3
+- update platformio.ini for beta version v2.0.2-beta3
+- update changelog and header for version v2.0.2-beta2
+- update platformio.ini for beta version v2.0.2-beta2
+- update changelog and header for version v2.0.2-beta1
+- update platformio.ini for beta version v2.0.2-beta1
+
+### Fixed
+- set scale tare request to true in setup function
+- correct assignment operator in scale tare request handling
+- correct tare scale request handling in tareScale function
+- reset weight filter after tare scale operation
+- correct tare scale function to set scaleTareRequest flag
+- reset weight counter logic and update spool ID in loop function
+- reduce delay in start_scale function and reset weight after tare
+
+
+## [2.0.2-beta5] - 2025-09-02
+### Added
+- add updateOctoSpoolId for OctoPrint integration and change autoSetToBambuSpoolId type to uint16_t
+
+### Changed
+- update platformio.ini for beta version v2.0.2-beta5
+- update changelog and header for version v2.0.2-beta4
+- update platformio.ini for beta version v2.0.2-beta4
+- update changelog and header for version v2.0.2-beta3
+- update platformio.ini for beta version v2.0.2-beta3
+- update changelog and header for version v2.0.2-beta2
+- update platformio.ini for beta version v2.0.2-beta2
+- update changelog and header for version v2.0.2-beta1
+- update platformio.ini for beta version v2.0.2-beta1
+
+### Fixed
+- correct tare scale request handling in tareScale function
+- reset weight filter after tare scale operation
+- correct tare scale function to set scaleTareRequest flag
+- reset weight counter logic and update spool ID in loop function
+- reduce delay in start_scale function and reset weight after tare
+
+
+## [2.0.2-beta4] - 2025-09-02
+### Added
+- add updateOctoSpoolId for OctoPrint integration and change autoSetToBambuSpoolId type to uint16_t
+
+### Changed
+- update platformio.ini for beta version v2.0.2-beta4
+- update changelog and header for version v2.0.2-beta3
+- update platformio.ini for beta version v2.0.2-beta3
+- update changelog and header for version v2.0.2-beta2
+- update platformio.ini for beta version v2.0.2-beta2
+- update changelog and header for version v2.0.2-beta1
+- update platformio.ini for beta version v2.0.2-beta1
+
+### Fixed
+- reset weight filter after tare scale operation
+- correct tare scale function to set scaleTareRequest flag
+- reset weight counter logic and update spool ID in loop function
+- reduce delay in start_scale function and reset weight after tare
+
+
+## [2.0.2-beta3] - 2025-09-02
+### Added
+- add updateOctoSpoolId for OctoPrint integration and change autoSetToBambuSpoolId type to uint16_t
+
+### Changed
+- update platformio.ini for beta version v2.0.2-beta3
+- update changelog and header for version v2.0.2-beta2
+- update platformio.ini for beta version v2.0.2-beta2
+- update changelog and header for version v2.0.2-beta1
+- update platformio.ini for beta version v2.0.2-beta1
+
+### Fixed
+- correct tare scale function to set scaleTareRequest flag
+- reset weight counter logic and update spool ID in loop function
+- reduce delay in start_scale function and reset weight after tare
+
+
+## [2.0.2-beta2] - 2025-09-02
+### Added
+- add updateOctoSpoolId for OctoPrint integration and change autoSetToBambuSpoolId type to uint16_t
+
+### Changed
+- update platformio.ini for beta version v2.0.2-beta2
+- update changelog and header for version v2.0.2-beta1
+- update platformio.ini for beta version v2.0.2-beta1
+
+### Fixed
+- reset weight counter logic and update spool ID in loop function
+- reduce delay in start_scale function and reset weight after tare
+
+
+## [2.0.2-beta1] - 2025-09-02
+### Changed
+- update platformio.ini for beta version v2.0.2-beta1
+
+### Fixed
+- reset weight counter logic and update spool ID in loop function
+- reduce delay in start_scale function and reset weight after tare
+
+
 ## [2.0.2] - 2025-09-01
 ### Added
 - add weight check and update spool weight in writeJsonToTag function

platformio.ini

@@ -9,7 +9,7 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [common]
-version = "2.0.2"
+version = "2.0.4"
 to_old_version = "1.5.10"
 
 ##

scripts/update_changelog.py

@@ -42,6 +42,12 @@ def categorize_commit(commit_msg):
     """Categorize commit messages based on conventional commits"""
     lower_msg = commit_msg.lower()
     
+    # Filter out automatic release documentation commits
+    if ('docs:' in lower_msg and 
+        ('update changelog and header for version' in lower_msg or 
+         'update platformio.ini for' in lower_msg)):
+        return None  # Skip these commits
+    
     # Check for breaking changes first
     if ('!' in commit_msg and any(x in lower_msg for x in ['feat!', 'fix!', 'chore!', 'refactor!'])) or \
        'breaking change' in lower_msg or 'breaking:' in lower_msg:
@@ -77,11 +83,12 @@ def get_changes_from_git():
         for commit in commits:
             if commit:
                 category = categorize_commit(commit)
-                # Clean up commit message
-                clean_msg = re.sub(r'^(feat|fix|chore|docs|style|refactor|perf|test)(\(.*\))?!?:', '', commit).strip()
-                # Remove BREAKING CHANGE prefix if present
-                clean_msg = re.sub(r'^breaking change:\s*', '', clean_msg, flags=re.IGNORECASE).strip()
-                changes[category].append(clean_msg)
+                if category is not None:  # Skip commits that return None (filtered out)
+                    # Clean up commit message
+                    clean_msg = re.sub(r'^(feat|fix|chore|docs|style|refactor|perf|test)(\(.*\))?!?:', '', commit).strip()
+                    # Remove BREAKING CHANGE prefix if present
+                    clean_msg = re.sub(r'^breaking change:\s*', '', clean_msg, flags=re.IGNORECASE).strip()
+                    changes[category].append(clean_msg)
                 
     except subprocess.CalledProcessError:
         print("Error: Failed to get git commits")

src/api.cpp

@@ -21,6 +21,7 @@ uint16_t foundVendorId = 0;    // Store ID of found vendor
 uint16_t foundFilamentId = 0;  // Store ID of found filament
 uint16_t createdFilamentId = 0;  // Store ID of newly created filament
 uint16_t createdSpoolId = 0;  // Store ID of newly created spool
+uint16_t updateOctoSpoolId = 0; // Store spool ID for OctoPrint update
 bool spoolmanConnected = false;
 bool spoolmanExtraFieldsChecked = false;
 TaskHandle_t* apiTask;

src/api.h

@@ -33,6 +33,7 @@ extern bool sendOctoUpdate;
 extern String octoUrl;
 extern String octoToken;
 extern bool spoolmanConnected;
+extern uint16_t updateOctoSpoolId;
 
 bool checkSpoolmanInstance();
 bool saveSpoolmanUrl(const String& url, bool octoOn, const String& octoWh, const String& octoTk);

src/bambu.cpp

@@ -21,7 +21,7 @@ TaskHandle_t BambuMqttTask;
 bool bambuDisabled = false;
 
 bool bambu_connected = false;
-int autoSetToBambuSpoolId = 0;
+uint16_t autoSetToBambuSpoolId = 0;
 
 BambuCredentials bambuCredentials;
 

src/bambu.h

@@ -37,7 +37,7 @@ extern bool bambu_connected;
 extern int ams_count;
 extern AMSData ams_data[MAX_AMS];
 //extern bool autoSendToBambu;
-extern int autoSetToBambuSpoolId;
+extern uint16_t autoSetToBambuSpoolId;
 extern bool bambuDisabled;
 extern BambuCredentials bambuCredentials;
 

src/main.cpp

@@ -59,6 +59,7 @@ void setup() {
 
   // Scale
   start_scale(touchSensorConnected);
+  scaleTareRequest = true;
 
   // WDT initialisieren mit 10 Sekunden Timeout
   bool panic = true; // Wenn true, löst ein WDT-Timeout einen System-Panik aus
@@ -220,7 +221,6 @@ void loop() {
     }
 
     // reset weight counter after writing tag
-    // TBD: what exactly is the logic behind this?
     if (currentMillis - lastWeightReadTime >= weightReadInterval && nfcReaderState != NFC_IDLE && nfcReaderState != NFC_READ_SUCCESS)
     {
       weigthCouterToApi = 0;
@@ -243,6 +243,10 @@ void loop() {
         {
           autoSetToBambuSpoolId = activeSpoolId.toInt();
         }
+        if (octoEnabled) 
+        {
+          updateOctoSpoolId = activeSpoolId.toInt();
+        }
       }
       else
       {
@@ -272,7 +276,7 @@ void loop() {
 
     if(octoEnabled && sendOctoUpdate && spoolmanApiState == API_IDLE)
     {
-      updateSpoolOcto(autoSetToBambuSpoolId);
+      updateSpoolOcto(updateOctoSpoolId);
       sendOctoUpdate = false;
     }
   }

src/scale.cpp

@@ -141,7 +141,7 @@ uint8_t setAutoTare(bool autoTareValue) {
 uint8_t tareScale() {
   Serial.println("Tare scale");
   scale.tare();
-  resetWeightFilter(); // Reset stabilization filter after tare
+  resetWeightFilter();
   
   return 1;
 }
@@ -151,6 +151,7 @@ void scale_loop(void * parameter) {
   Serial.println("Scale Loop started");
   Serial.println("++++++++++++++++++++++++++++++");
 
+  //scaleTareRequest == true;
   // Initialize weight filter
   resetWeightFilter();
   lastMeasurementTime = millis();
@@ -166,8 +167,9 @@ void scale_loop(void * parameter) {
         if (autoTare && scale_tare_counter >= 5) 
         {
           Serial.println("Auto Tare scale");
-          scale.tare();
-          resetWeightFilter(); // Reset filter after auto tare
+          //scale.tare();
+          //resetWeightFilter(); // Reset filter after auto tare
+          scaleTareRequest = true;
           scale_tare_counter = 0;
         }
 
@@ -257,9 +259,6 @@ void start_scale(bool touchSensorConnected) {
   // Display Gewicht
   oledShowWeight(0);
 
-  vTaskDelay(1000 / portTICK_PERIOD_MS);
-  scale.tare();
-
   Serial.println("starte Scale Task");
   BaseType_t result = xTaskCreatePinnedToCore(
     scale_loop, /* Function to implement the task */

src/website.cpp

@@ -81,7 +81,9 @@ void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventTyp
         else if (doc["type"] == "scale") {
             uint8_t success = 0;
             if (doc["payload"] == "tare") {
-                success = tareScale();
+                scaleTareRequest = true;
+                success = 1;
+                //success = tareScale();
             }
 
             if (doc["payload"] == "calibrate") {