docs: update changelog and header for version v1.5.12-beta17

- Removed unused function for getting current date in ISO8601 format.
- Updated JSON key names in filament and spool creation to use shorter identifiers.
- Enhanced NFC interface reset procedure with detailed logging and retry mechanisms.
- Improved stability checks after write operations to ensure NFC interface readiness.
- Added comprehensive error handling and diagnostics for NFC read/write operations.
- Streamlined the quick spool ID check to optimize performance and reliability.

CHANGELOG.md

@@ -1,5 +1,189 @@
 # Changelog
 
+## [1.5.12-beta17] - 2025-08-29
+### Added
+- add progress bar updates for vendor and filament creation processes
+
+### Changed
+- update platformio.ini for beta version v1.5.12-beta17
+- optimize page limit detection and remove redundant verification code
+
+### Fixed
+- update vendor check to use shorthand key in payload
+
+
+## [1.5.12-beta16] - 2025-08-29
+### Changed
+- update platformio.ini for beta version v1.5.12-beta16
+- Refactor NFC interface handling and improve error diagnostics
+
+
+## [1.5.12-beta15] - 2025-08-29
+### Changed
+- update platformio.ini for beta version v1.5.12-beta15
+- enhance NFC write operation diagnostics and improve error handling
+- enhance NFC write operation handling and prevent tag operations during write
+
+
+## [1.5.12-beta14] - 2025-08-29
+### Changed
+- update platformio.ini for beta version v1.5.12-beta14
+- optimize JSON payload structure and enhance NFC tag validation process
+
+
+## [1.5.12-beta13] - 2025-08-29
+### Changed
+- update platformio.ini for beta version v1.5.12-beta13
+- reorganize clearUserDataArea function for improved clarity and safety
+
+
+## [1.5.12-beta12] - 2025-08-29
+### Changed
+- update platformio.ini for beta version v1.5.12-beta12
+
+### Fixed
+- reset NFC state on API send failure to allow retry
+- update createdFilamentId reset value to 65535 for better task handling
+- update createdVendorId reset value to 65535 for improved API handling
+
+
+## [1.5.12-beta11] - 2025-08-29
+### Changed
+- update platformio.ini for beta version v1.5.12-beta11
+
+### Fixed
+- update spoolman ID reset values to 65535 for better API response detection
+
+
+## [1.5.12-beta10] - 2025-08-29
+### Changed
+- update platformio.ini for beta version v1.5.12-beta10
+- streamline task creation in checkVendor and checkFilament functions
+
+
+## [1.5.12-beta9] - 2025-08-29
+### Added
+- update vendor and filament ID handling to use NULL and add delays for stability
+
+### Changed
+- update platformio.ini for beta version v1.5.12-beta9
+
+
+## [1.5.12-beta8] - 2025-08-29
+### Added
+- add delay to ensure proper setting of vendor and filament IDs after API state changes
+
+### Changed
+- update platformio.ini for beta version v1.5.12-beta8
+
+### Fixed
+- correct color_hex key usage and comment out unused date fields in spool creation
+
+
+## [1.5.12-beta7] - 2025-08-29
+### Changed
+- update platformio.ini for beta version v1.5.12-beta7
+
+### Fixed
+- improve API state handling and vendor name formatting
+
+
+## [1.5.12-beta6] - 2025-08-29
+### Changed
+- update platformio.ini for beta version v1.5.12-beta6
+- improve task synchronization in vendor, filament, and spool creation functions
+
+
+## [1.5.12-beta5] - 2025-08-29
+### Added
+- enhance NDEF decoding with detailed validation and debugging output
+
+### Changed
+- update platformio.ini for beta version v1.5.12-beta5
+
+
+## [1.5.12-beta4] - 2025-08-29
+### Added
+- enhance NDEF decoding to validate structure and extract JSON payload
+
+### Changed
+- update platformio.ini for beta version v1.5.12-beta4
+
+
+## [1.5.12-beta3] - 2025-08-29
+### Added
+- add logging for decoded JSON data in NFC processing
+
+### Changed
+- update platformio.ini for beta version v1.5.12-beta3
+
+
+## [1.5.12-beta2] - 2025-08-29
+### Changed
+- update platformio.ini for beta version v1.5.12-beta2
+
+### Fixed
+- enhance filament creation logic to include dynamic comments based on payload
+
+
+## [1.5.12-beta1] - 2025-08-28
+### Added
+- implement filament and spool creation in Spoolman API
+- Add JSON structure comments for filament and spool creation
+- Add vendor and filament management to API; implement recycling factory handling in NFC
+
+### Changed
+- update platformio.ini for beta version v1.5.12-beta1
+- Merge branch 'main' into recyclingfabrik
+- Merge branch 'main' into recyclingfabrik
+
+
+## [1.5.12] - 2025-08-28
+### Added
+- add numbering to update sections in upgrade.html refactor: improve readability of checkSpoolmanInstance function
+
+### Changed
+- update platformio.ini for version v1.5.12
+- clean up library dependencies in platformio.ini
+
+
+## [1.5.11-beta4] - 2025-08-28
+### Changed
+- update platformio.ini for beta version v1.5.11-beta4
+
+### Fixed
+- remove debug logging from checkSpoolmanInstance function
+
+
+## [1.5.11-beta3] - 2025-08-28
+### Added
+- add logging for spoolman status in checkSpoolmanInstance function
+
+### Changed
+- update platformio.ini for beta version v1.5.11-beta3
+
+
+## [1.5.11-beta2] - 2025-08-28
+### Added
+- add logging for healthy spoolman instance check
+
+### Changed
+- update platformio.ini for beta version v1.5.11-beta2
+
+
+## [1.5.11-beta1] - 2025-08-28
+### Changed
+- update platformio.ini for beta version v1.5.11-beta1
+
+### Fixed
+- adjust spacing in loop structure and enable tare function in scale loop
+
+
+## [1.5.11] - 2025-08-27
+### Changed
+- update platformio.ini for version v1.5.11
+
+
 ## [1.5.10] - 2025-08-27
 ### Added
 - improve weight processing logic and add auto-send feature for Bambu spool ID

html/upgrade.html

@@ -56,7 +56,7 @@
 
         <div class="update-options">
             <div class="update-section">
-                <h2>Firmware Update</h2>
+                <h2>1) Firmware Update</h2>
                 <p>Upload a new firmware file (upgrade_filaman_firmware_*.bin)</p>
                 <div class="update-form">
                     <form id="firmwareForm" enctype='multipart/form-data' data-type="firmware">
@@ -67,7 +67,7 @@
             </div>
 
             <div class="update-section">
-                <h2>Webpage Update</h2>
+                <h2>2) Webpage Update</h2>
                 <p>Upload a new webpage file (upgrade_filaman_website_*.bin)</p>
                 <div class="update-form">
                     <form id="webpageForm" enctype='multipart/form-data' data-type="webpage">

platformio.ini

@@ -9,7 +9,7 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [common]
-version = "1.5.10"
+version = "1.5.12-beta17"
 to_old_version = "1.5.0"
 
 ##
@@ -23,10 +23,7 @@ monitor_speed = 115200
 lib_deps =
     tzapu/WiFiManager @ ^2.0.17
     https://github.com/me-no-dev/ESPAsyncWebServer.git#master
-    #me-no-dev/AsyncTCP @ ^1.1.1
     https://github.com/esphome/AsyncTCP.git
-    #mathieucarbou/ESPAsyncWebServer @ ^3.6.0
-    #esp32async/AsyncTCP @ ^3.3.5
     bogde/HX711 @ ^0.7.5
     adafruit/Adafruit SSD1306 @ ^2.5.13
     adafruit/Adafruit GFX Library @ ^1.11.11
@@ -36,7 +33,6 @@ lib_deps =
     digitaldragon/SSLClient @ ^1.3.2
     
 ; Enable SPIFFS upload
-#board_build.filesystem = spiffs
 board_build.filesystem = littlefs
 ; Update partition settings
 board_build.partitions = partitions.csv

src/api.cpp

@@ -5,8 +5,10 @@
 #include <Preferences.h>
 #include "debug.h"
 #include "scale.h"
-
+#include "nfc.h"
+#include <time.h>
 volatile spoolmanApiStateType spoolmanApiState = API_IDLE;
+
 //bool spoolman_connected = false;
 String spoolmanUrl = "";
 bool octoEnabled = false;
@@ -14,6 +16,11 @@ bool sendOctoUpdate = false;
 String octoUrl = "";
 String octoToken = "";
 uint16_t remainingWeight = 0;
+uint16_t createdVendorId = 0;  // Store ID of newly created vendor
+uint16_t foundVendorId = 0;    // Store ID of found vendor
+uint16_t foundFilamentId = 0;  // Store ID of found filament
+uint16_t createdFilamentId = 0;  // Store ID of newly created filament
+uint16_t createdSpoolId = 0;  // Store ID of newly created spool
 bool spoolmanConnected = false;
 bool spoolmanExtraFieldsChecked = false;
 TaskHandle_t* apiTask;
@@ -103,7 +110,7 @@ void sendToApi(void *parameter) {
 
     // Wait until API is IDLE
     while(spoolmanApiState != API_IDLE){
-        Serial.println("Waiting!");
+        vTaskDelay(100 / portTICK_PERIOD_MS);
         yield();
     }
     spoolmanApiState = API_TRANSMITTING;
@@ -129,10 +136,11 @@ void sendToApi(void *parameter) {
     int httpCode;
     if (httpType == "PATCH") httpCode = http.PATCH(updatePayload);
     else if (httpType == "POST") httpCode = http.POST(updatePayload);
+    else if (httpType == "GET") httpCode = http.GET();
     else httpCode = http.PUT(updatePayload);
 
     if (httpCode == HTTP_CODE_OK) {
-        Serial.println("Spoolman erfolgreich aktualisiert");
+        Serial.println("Spoolman Abfrage erfolgreich");
 
         // Restgewicht der Spule auslesen
         String payload = http.getString();
@@ -168,6 +176,86 @@ void sendToApi(void *parameter) {
                 oledShowProgressBar(5, 5, "Spool Tag", ("Done: " + String(remainingWeight) + " g remain").c_str());
                 remainingWeight = 0;
                 break;
+            case API_REQUEST_VENDOR_CREATE:
+                Serial.println("Vendor successfully created!");
+                createdVendorId = doc["id"].as<uint16_t>();
+                Serial.print("Created Vendor ID: ");
+                Serial.println(createdVendorId);
+                oledShowProgressBar(1, 1, "Vendor", "Created!");
+                break;
+            case API_REQUEST_VENDOR_CHECK:
+                if (doc.isNull() || doc.size() == 0) {
+                    Serial.println("Vendor not found in response");
+                    foundVendorId = 0;
+                } else {
+                    foundVendorId = doc[0]["id"].as<uint16_t>();
+                    Serial.print("Found Vendor ID: ");
+                    Serial.println(foundVendorId);
+                }
+                break;
+            case API_REQUEST_FILAMENT_CHECK:
+                if (doc.isNull() || doc.size() == 0) {
+                    Serial.println("Filament not found in response");
+                    foundFilamentId = 0;
+                } else {
+                    foundFilamentId = doc[0]["id"].as<uint16_t>();
+                    Serial.print("Found Filament ID: ");
+                    Serial.println(foundFilamentId);
+                }
+                break;
+            case API_REQUEST_FILAMENT_CREATE:
+                Serial.println("Filament successfully created!");
+                createdFilamentId = doc["id"].as<uint16_t>();
+                Serial.print("Created Filament ID: ");
+                Serial.println(createdFilamentId);
+                oledShowProgressBar(1, 1, "Filament", "Created!");
+                break;
+            case API_REQUEST_SPOOL_CREATE:
+                Serial.println("Spool successfully created!");
+                createdSpoolId = doc["id"].as<uint16_t>();
+                Serial.print("Created Spool ID: ");
+                Serial.println(createdSpoolId);
+                oledShowProgressBar(1, 1, "Spool", "Created!");
+                break;
+            }
+        }
+        doc.clear();
+    } else if (httpCode == HTTP_CODE_CREATED) {
+        Serial.println("Spoolman erfolgreich erstellt");
+        
+        // Parse response for created resources
+        String payload = http.getString();
+        JsonDocument doc;
+        DeserializationError error = deserializeJson(doc, payload);
+        if (error) {
+            Serial.print("Fehler beim Parsen der JSON-Antwort: ");
+            Serial.println(error.c_str());
+        } else {
+            switch(requestType){
+            case API_REQUEST_VENDOR_CREATE:
+                Serial.println("Vendor successfully created!");
+                createdVendorId = doc["id"].as<uint16_t>();
+                Serial.print("Created Vendor ID: ");
+                Serial.println(createdVendorId);
+                oledShowProgressBar(1, 1, "Vendor", "Created!");
+                break;
+            case API_REQUEST_FILAMENT_CREATE:
+                Serial.println("Filament successfully created!");
+                createdFilamentId = doc["id"].as<uint16_t>();
+                Serial.print("Created Filament ID: ");
+                Serial.println(createdFilamentId);
+                oledShowProgressBar(1, 1, "Filament", "Created!");
+                break;
+            case API_REQUEST_SPOOL_CREATE:
+                Serial.println("Spool successfully created!");
+                createdSpoolId = doc["id"].as<uint16_t>();
+                Serial.print("Created Spool ID: ");
+                Serial.println(createdSpoolId);
+                oledShowProgressBar(1, 1, "Spool", "Created!");
+                break;
+            default:
+                // Handle other create operations if needed
+                break;
             }
         }
         doc.clear();
@@ -235,11 +323,19 @@ void sendToApi(void *parameter) {
         case API_REQUEST_BAMBU_UPDATE:
             oledShowProgressBar(1, 1, "Failure!", "Bambu update");
             break;
+        case API_REQUEST_VENDOR_CREATE:
+            oledShowProgressBar(1, 1, "Failure!", "Vendor create");
+            break;
+        case API_REQUEST_FILAMENT_CREATE:
+            oledShowProgressBar(1, 1, "Failure!", "Filament create");
+            break;
+        case API_REQUEST_SPOOL_CREATE:
+            oledShowProgressBar(1, 1, "Failure!", "Spool create");
+            break;
         }
         Serial.println("Fehler beim Senden an Spoolman! HTTP Code: " + String(httpCode));
-
-        // TBD: really required?
         vTaskDelay(2000 / portTICK_PERIOD_MS);
+        nfcReaderState = NFC_IDLE; // Reset NFC state to allow retry
     }
 
     http.end();
@@ -504,6 +600,383 @@ bool updateSpoolBambuData(String payload) {
     return true;
 }
 
+// #### Brand Filament
+uint16_t createVendor(String vendor) {
+    oledShowProgressBar(2, 5, "New Brand", "Create new Vendor");
+
+    // Create new vendor in Spoolman database using task system
+    // Note: Due to async nature, the ID will be stored in createdVendorId global variable
+    // Note: This function assumes that the caller has already ensured API is IDLE
+    createdVendorId = 65535; // Reset previous value
+    
+    String spoolsUrl = spoolmanUrl + apiUrl + "/vendor";
+    Serial.print("Create vendor with URL: ");
+    Serial.println(spoolsUrl);
+
+    // Create JSON payload for vendor creation
+    JsonDocument vendorDoc;
+    vendorDoc["name"] = vendor;
+    vendorDoc["comment"] = "automatically generated";
+    vendorDoc["external_id"] = vendor;
+
+    String vendorPayload;
+    serializeJson(vendorDoc, vendorPayload);
+    Serial.print("Vendor Payload: ");
+    Serial.println(vendorPayload);
+
+    SendToApiParams* params = new SendToApiParams();
+    if (params == nullptr) {
+        Serial.println("Fehler: Kann Speicher für Task-Parameter nicht allokieren.");
+        vendorDoc.clear();
+        return 0;
+    }
+    params->requestType = API_REQUEST_VENDOR_CREATE;
+    params->httpType = "POST";
+    params->spoolsUrl = spoolsUrl;
+    params->updatePayload = vendorPayload;
+
+    // Create task without additional API state check since caller ensures synchronization
+    BaseType_t result = xTaskCreate(
+        sendToApi,                // Task-Funktion
+        "SendToApiTask",          // Task-Name
+        6144,                     // Stackgröße in Bytes
+        (void*)params,            // Parameter
+        0,                        // Priorität
+        NULL                      // Task-Handle (nicht benötigt)
+    );
+
+    if (result != pdPASS) {
+        Serial.println("Failed to create vendor task!");
+        delete params;
+        vendorDoc.clear();
+        return 0;
+    }
+
+    vendorDoc.clear();
+    
+    // Wait for task completion and return the created vendor ID
+    // Note: createdVendorId will be set by sendToApi when response is received
+    while(createdVendorId == 65535) {
+        vTaskDelay(50 / portTICK_PERIOD_MS);
+    }
+    
+    return createdVendorId;
+}
+
+uint16_t checkVendor(String vendor) {
+    oledShowProgressBar(1, 5, "New Brand", "Check Vendor");
+
+    // Check if vendor exists using task system
+    foundVendorId = 65535; // Reset to invalid value to detect when API response is received
+    
+    String vendorName = vendor;
+    vendorName.trim();
+    vendorName.replace(" ", "+");
+    String spoolsUrl = spoolmanUrl + apiUrl + "/vendor?name=" + vendorName;
+    Serial.print("Check vendor with URL: ");
+    Serial.println(spoolsUrl);
+
+    SendToApiParams* params = new SendToApiParams();
+    if (params == nullptr) {
+        Serial.println("Fehler: Kann Speicher für Task-Parameter nicht allokieren.");
+        return 0;
+    }
+    params->requestType = API_REQUEST_VENDOR_CHECK;
+    params->httpType = "GET";
+    params->spoolsUrl = spoolsUrl;
+    params->updatePayload = ""; // Empty for GET request
+
+    // Check if API is idle before creating task
+    while (spoolmanApiState != API_IDLE)
+    {
+        vTaskDelay(100 / portTICK_PERIOD_MS);
+    }
+    
+    // Erstelle die Task
+    BaseType_t result = xTaskCreate(
+        sendToApi,                // Task-Funktion
+        "SendToApiTask",          // Task-Name
+        6144,                     // Stackgröße in Bytes
+        (void*)params,            // Parameter
+        0,                        // Priorität
+        NULL                      // Task-Handle (nicht benötigt)
+    );
+    
+    // Wait until foundVendorId is updated by the API response (not 65535 anymore)
+    while (foundVendorId == 65535)
+    {
+        vTaskDelay(50 / portTICK_PERIOD_MS);
+    }
+
+    // Check if vendor was found
+    if (foundVendorId == 0) {
+        Serial.println("Vendor not found, creating new vendor...");
+        uint16_t vendorId = createVendor(vendor);
+        if (vendorId == 0) {
+            Serial.println("Failed to create vendor, returning 0.");
+            return 0; // Failed to create vendor
+        } else {
+            Serial.println("Vendor created with ID: " + String(vendorId));
+            return vendorId;
+        }
+    } else {
+        Serial.println("Vendor found: " + vendor);
+        Serial.print("Vendor ID: ");
+        Serial.println(foundVendorId);
+        return foundVendorId;
+    }
+}
+
+uint16_t createFilament(uint16_t vendorId, const JsonDocument& payload) {
+    oledShowProgressBar(4, 5, "New Brand", "Create Filament");
+
+    // Create new filament in Spoolman database using task system
+    // Note: Due to async nature, the ID will be stored in createdFilamentId global variable
+    // Note: This function assumes that the caller has already ensured API is IDLE
+    createdFilamentId = 65535; // Reset previous value
+    
+    String spoolsUrl = spoolmanUrl + apiUrl + "/filament";
+    Serial.print("Create filament with URL: ");
+    Serial.println(spoolsUrl);
+
+    // Create JSON payload for filament creation
+    JsonDocument filamentDoc;
+    filamentDoc["name"] = payload["cn"].as<String>();
+    filamentDoc["vendor_id"] = String(vendorId);
+    filamentDoc["material"] = payload["t"].as<String>();
+    filamentDoc["density"] = (payload["de"].is<String>() && payload["de"].as<String>().length() > 0) ? payload["de"].as<String>() : "1.24";
+    filamentDoc["diameter"] = (payload["di"].is<String>() && payload["di"].as<String>().length() > 0) ? payload["di"].as<String>() : "1.75";
+    filamentDoc["weight"] = String(weight);
+    filamentDoc["spool_weight"] = payload["sw"].as<String>();
+    filamentDoc["article_number"] = payload["an"].as<String>();
+    filamentDoc["settings_extruder_temp"] = payload["et"].is<String>() ? payload["et"].as<String>() : "";
+    filamentDoc["settings_bed_temp"] = payload["bt"].is<String>() ? payload["bt"].as<String>() : "";
+
+    if (payload["an"].is<String>())
+    {
+        filamentDoc["external_id"] = payload["an"].as<String>();
+        filamentDoc["comment"] = payload["u"].is<String>() ? payload["u"].as<String>() + payload["an"].as<String>() : "automatically generated";
+    }
+    else
+    {
+        filamentDoc["comment"] = payload["u"].is<String>() ? payload["u"].as<String>() : "automatically generated";
+    }
+
+    if (payload["mc"].is<String>()) {
+        filamentDoc["multi_color_hexes"] = payload["mc"].as<String>();
+        filamentDoc["multi_color_direction"] = payload["mcd"].is<String>() ? payload["mcd"].as<String>() : "";
+    }
+    else
+    {
+        filamentDoc["color_hex"] = (payload["c"].is<String>() && payload["c"].as<String>().length() >= 6) ? payload["c"].as<String>() : "FFFFFF";
+    }
+
+    String filamentPayload;
+    serializeJson(filamentDoc, filamentPayload);
+    Serial.print("Filament Payload: ");
+    Serial.println(filamentPayload);
+
+    SendToApiParams* params = new SendToApiParams();
+    if (params == nullptr) {
+        Serial.println("Fehler: Kann Speicher für Task-Parameter nicht allokieren.");
+        filamentDoc.clear();
+        return 0;
+    }
+    params->requestType = API_REQUEST_FILAMENT_CREATE;
+    params->httpType = "POST";
+    params->spoolsUrl = spoolsUrl;
+    params->updatePayload = filamentPayload;
+
+    // Create task without additional API state check since caller ensures synchronization
+    BaseType_t result = xTaskCreate(
+        sendToApi,                // Task-Funktion
+        "SendToApiTask",          // Task-Name
+        6144,                     // Stackgröße in Bytes
+        (void*)params,            // Parameter
+        0,                        // Priorität
+        NULL                      // Task-Handle (nicht benötigt)
+    );
+
+    if (result != pdPASS) {
+        Serial.println("Failed to create filament task!");
+        delete params;
+        filamentDoc.clear();
+        return 0;
+    }
+
+    filamentDoc.clear();
+    
+    // Wait for task completion and return the created filament ID
+    // Note: createdFilamentId will be set by sendToApi when response is received
+    while(createdFilamentId == 65535) {
+        vTaskDelay(50 / portTICK_PERIOD_MS);
+    }
+    
+    return createdFilamentId;
+}
+
+uint16_t checkFilament(uint16_t vendorId, const JsonDocument& payload) {
+    oledShowProgressBar(3, 5, "New Brand", "Check Filament");
+
+    // Check if filament exists using task system
+    foundFilamentId = 65535; // Reset to invalid value to detect when API response is received
+
+    String spoolsUrl = spoolmanUrl + apiUrl + "/filament?vendor.id=" + String(vendorId) + "&external_id=" + String(payload["artnr"].as<String>());
+    Serial.print("Check filament with URL: ");
+    Serial.println(spoolsUrl);
+
+    SendToApiParams* params = new SendToApiParams();
+    if (params == nullptr) {
+        Serial.println("Fehler: Kann Speicher für Task-Parameter nicht allokieren.");
+        return 0;
+    }
+    params->requestType = API_REQUEST_FILAMENT_CHECK;
+    params->httpType = "GET";
+    params->spoolsUrl = spoolsUrl;
+    params->updatePayload = ""; // Empty for GET request
+
+     // Erstelle die Task
+    BaseType_t result = xTaskCreate(
+        sendToApi,                // Task-Funktion
+        "SendToApiTask",          // Task-Name
+        6144,                     // Stackgröße in Bytes
+        (void*)params,            // Parameter
+        0,                        // Priorität
+        NULL                      // Task-Handle (nicht benötigt)
+    );
+    
+    // Wait until foundFilamentId is updated by the API response (not 65535 anymore)
+    while (foundFilamentId == 65535) {
+        vTaskDelay(50 / portTICK_PERIOD_MS);
+    }
+
+    // Check if filament was found
+    if (foundFilamentId == 0) {
+        Serial.println("Filament not found, creating new filament...");
+        uint16_t filamentId = createFilament(vendorId, payload);
+        if (filamentId == 0) {
+            Serial.println("Failed to create filament, returning 0.");
+            return 0; // Failed to create filament
+        } else {
+            Serial.println("Filament created with ID: " + String(filamentId));
+            return filamentId;
+        }
+    } else {
+        Serial.println("Filament found for vendor ID: " + String(vendorId));
+        Serial.print("Filament ID: ");
+        Serial.println(foundFilamentId);
+        return foundFilamentId;
+    }
+}
+
+uint16_t createSpool(uint16_t vendorId, uint16_t filamentId, JsonDocument& payload, String uidString) {
+    oledShowProgressBar(5, 5, "New Brand", "Create new Spool");
+
+    // Create new spool in Spoolman database using task system
+    // Note: Due to async nature, the ID will be stored in createdSpoolId global variable
+    // Note: This function assumes that the caller has already ensured API is IDLE
+    createdSpoolId = 65535; // Reset to invalid value to detect when API response is received
+    
+    String spoolsUrl = spoolmanUrl + apiUrl + "/spool";
+    Serial.print("Create spool with URL: ");
+    Serial.println(spoolsUrl);
+
+    // Create JSON payload for spool creation
+    JsonDocument spoolDoc;
+    spoolDoc["filament_id"] = String(filamentId);
+    spoolDoc["initial_weight"] = weight > 10 ? String(weight - payload["sw"].as<int>()) : "1000";
+    spoolDoc["spool_weight"] = (payload["sw"].is<String>() && payload["sw"].as<String>().length() > 0) ? payload["sw"].as<String>() : "180";
+    spoolDoc["remaining_weight"] = spoolDoc["initial_weight"];
+    spoolDoc["lot_nr"] = (payload["an"].is<String>() && payload["an"].as<String>().length() > 0) ? payload["an"].as<String>() : "";
+    spoolDoc["comment"] = "automatically generated";
+    spoolDoc["extra"]["nfc_id"] = "\"" + uidString + "\"";
+
+    String spoolPayload;
+    serializeJson(spoolDoc, spoolPayload);
+    Serial.print("Spool Payload: ");
+    Serial.println(spoolPayload);
+    spoolDoc.clear();
+
+    SendToApiParams* params = new SendToApiParams();
+    if (params == nullptr) {
+        Serial.println("Fehler: Kann Speicher für Task-Parameter nicht allokieren.");
+        spoolDoc.clear();
+        return 0;
+    }
+    params->requestType = API_REQUEST_SPOOL_CREATE;
+    params->httpType = "POST";
+    params->spoolsUrl = spoolsUrl;
+    params->updatePayload = spoolPayload;
+
+    // Create task without additional API state check since caller ensures synchronization
+    BaseType_t result = xTaskCreate(
+        sendToApi,                // Task-Funktion
+        "SendToApiTask",          // Task-Name
+        6144,                     // Stackgröße in Bytes
+        (void*)params,            // Parameter
+        0,                        // Priorität
+        NULL                      // Task-Handle (nicht benötigt)
+    );
+
+    if (result != pdPASS) {
+        Serial.println("Failed to create spool task!");
+        delete params;
+        return 0;
+    }
+    
+    // Wait for task completion and return the created spool ID
+    // Note: createdSpoolId will be set by sendToApi when response is received
+    while(createdSpoolId == 65535) {
+        vTaskDelay(50 / portTICK_PERIOD_MS);
+    }
+
+    // Write data to tag with startWriteJsonToTag
+    // void startWriteJsonToTag(const bool isSpoolTag, const char* payload);
+    
+    // Create optimized JSON structure with sm_id at the beginning for fast-path detection
+    JsonDocument optimizedPayload;
+    optimizedPayload["sm_id"] = String(createdSpoolId);  // Place sm_id first for fast scanning
+    optimizedPayload["b"] = payload["b"].as<String>();
+    optimizedPayload["cn"] = payload["an"].as<String>();
+    
+    String payloadString;
+    serializeJson(optimizedPayload, payloadString);
+    
+    Serial.println("Optimized JSON with sm_id first:");
+    Serial.println(payloadString);
+    
+    optimizedPayload.clear();
+    
+    nfcReaderState = NFC_IDLE;
+    vTaskDelay(50 / portTICK_PERIOD_MS);
+    startWriteJsonToTag(true, payloadString.c_str());
+
+    return createdSpoolId;
+}
+
+bool createBrandFilament(JsonDocument& payload, String uidString) {
+    uint16_t vendorId = checkVendor(payload["b"].as<String>());
+    if (vendorId == 0) {
+        Serial.println("ERROR: Failed to create/find vendor");
+        return false;
+    }
+    
+    uint16_t filamentId = checkFilament(vendorId, payload);
+    if (filamentId == 0) {
+        Serial.println("ERROR: Failed to create/find filament");
+        return false;
+    }
+    
+    uint16_t spoolId = createSpool(vendorId, filamentId, payload, uidString);
+    if (spoolId == 0) {
+        Serial.println("ERROR: Failed to create spool");
+        return false;
+    }
+    
+    Serial.println("SUCCESS: Brand filament created with Spool ID: " + String(spoolId));
+    return true;
+}
+
 // #### Spoolman init
 bool checkSpoolmanExtraFields() {
     // Only check extra fields if they have not been checked before
@@ -713,9 +1186,10 @@ bool checkSpoolmanInstance() {
             Serial.println("Error contacting spoolman instance! HTTP Code: " + String(httpCode));
         }
         http.end();
-        returnValue = false;
         spoolmanApiState = API_IDLE;
-    }else{
+    }
+    else
+    {
         // If the check is skipped, return the previous status
         Serial.println("Skipping spoolman healthcheck, API is active.");
         returnValue = spoolmanConnected;

src/api.h

@@ -17,7 +17,12 @@ typedef enum {
     API_REQUEST_BAMBU_UPDATE,
     API_REQUEST_SPOOL_TAG_ID_UPDATE,
     API_REQUEST_SPOOL_WEIGHT_UPDATE,
-    API_REQUEST_SPOOL_LOCATION_UPDATE
+    API_REQUEST_SPOOL_LOCATION_UPDATE,
+    API_REQUEST_VENDOR_CREATE,
+    API_REQUEST_VENDOR_CHECK,
+    API_REQUEST_FILAMENT_CHECK,
+    API_REQUEST_FILAMENT_CREATE,
+    API_REQUEST_SPOOL_CREATE
 } SpoolmanApiRequestType;
 
 extern volatile spoolmanApiStateType spoolmanApiState;
@@ -40,5 +45,6 @@ uint8_t updateSpoolLocation(String spoolId, String location);
 bool initSpoolman(); // Neue Funktion zum Initialisieren von Spoolman
 bool updateSpoolBambuData(String payload); // Neue Funktion zum Aktualisieren der Bambu-Daten
 bool updateSpoolOcto(int spoolId); // Neue Funktion zum Aktualisieren der Octo-Daten
+bool createBrandFilament(JsonDocument& payload, String uidString);
 
 #endif

src/bambu.cpp

@@ -33,6 +33,7 @@ AMSData ams_data[MAX_AMS];  // Definition des Arrays;
 bool removeBambuCredentials() {
     if (BambuMqttTask) {
         vTaskDelete(BambuMqttTask);
+        BambuMqttTask = NULL;
     }
     
     Preferences preferences;
@@ -63,6 +64,7 @@ bool removeBambuCredentials() {
 bool saveBambuCredentials(const String& ip, const String& serialnr, const String& accesscode, bool autoSend, const String& autoSendTime) {
     if (BambuMqttTask) {
         vTaskDelete(BambuMqttTask);
+        BambuMqttTask = NULL;
     }
 
     bambuCredentials.ip = ip.c_str();
@@ -593,6 +595,7 @@ void reconnect() {
                 Serial.println("Disable Bambu MQTT Task after 5 retries");
                 //vTaskSuspend(BambuMqttTask);
                 vTaskDelete(BambuMqttTask);
+                BambuMqttTask = NULL;
                 break;
             }
 
@@ -681,6 +684,7 @@ void bambu_restart() {
 
     if (BambuMqttTask) {
         vTaskDelete(BambuMqttTask);
+        BambuMqttTask = NULL;
         delay(10);
     }
     setupMqtt();

src/display.cpp

@@ -235,7 +235,7 @@ void oledShowIcon(const char* icon) {
     display.display();
 }
 
-void oledShowProgressBar(const uint8_t step, const uint8_t numSteps, const char* largeText, const char* statusMessage){
+void oledShowProgressBar(const uint8_t step, const uint8_t numSteps, const char* largeText, const char* statusMessage) {
     assert(step <= numSteps);
 
     // clear data and bar area

src/main.cpp

@@ -171,7 +171,9 @@ void loop() {
       oledShowMessage("Scale not calibrated");
       vTaskDelay(1000 / portTICK_PERIOD_MS);
     }
-  }else{
+  } 
+  else 
+  {
     // Ausgabe der Waage auf Display
     if(pauseMainTask == 0)
     {

src/nfc.h

@@ -16,6 +16,7 @@ typedef enum{
 void startNfc();
 void scanRfidTask(void * parameter);
 void startWriteJsonToTag(const bool isSpoolTag, const char* payload);
+bool quickSpoolIdCheck(String uidString);
 
 extern TaskHandle_t RfidReaderTask;
 extern String nfcJsonData;
@@ -23,6 +24,7 @@ extern String activeSpoolId;
 extern String lastSpoolId;
 extern volatile nfcReaderStateType nfcReaderState;
 extern volatile bool pauseBambuMqttTask;
+extern volatile bool nfcWriteInProgress;
 extern bool tagProcessed;
 
 

src/scale.cpp

@@ -48,6 +48,9 @@ void scale_loop(void * parameter) {
   Serial.println("Scale Loop started");
   Serial.println("++++++++++++++++++++++++++++++");
 
+  vTaskDelay(pdMS_TO_TICKS(500));
+  scale_tare_counter = 10; // damit beim Starten der Waage automatisch getart wird
+  
   for(;;) {
     if (scale.is_ready()) 
     {
@@ -120,7 +123,7 @@ void start_scale(bool touchSensorConnected) {
   if (scale.wait_ready_timeout(1000))
   {
     scale.set_scale(calibrationValue); // this value is obtained by calibrating the scale with known weights; see the README for details
-    scale.tare();
+    //scale.tare();
   }
 
   // Display Gewicht

src/website.cpp

@@ -48,9 +48,15 @@ void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventTyp
     } else if (type == WS_EVT_PONG) {
         Serial.printf("WebSocket Client #%u pong\n", client->id());
     } else if (type == WS_EVT_DATA) {
-        String message = String((char*)data);
         JsonDocument doc;
-        deserializeJson(doc, message);
+        DeserializationError error = deserializeJson(doc, (char*)data, len);
+        //String message = String((char*)data);
+        //deserializeJson(doc, message);
+
+        if (error) {
+            Serial.println("JSON deserialization failed: " + String(error.c_str()));
+            return;
+        }
 
         if (doc["type"] == "heartbeat") {
             // Sende Heartbeat-Antwort