refactor: remove unnecessary delay in MQTT setup and add delay before restart

Improves NFC Tag handling

.github/workflows/gitea-release.yml

@@ -41,16 +41,16 @@ jobs:
       run: |
         VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
         
-        # Build firmware and SPIFFS
+        # Build firmware and LittleFS
-        echo "Building firmware and SPIFFS..."
+        echo "Building firmware and LittleFS..."
         pio run -e esp32dev
         pio run -t buildfs
         
         # Copy firmware binary
         cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/upgrade_filaman_firmware_v${VERSION}.bin
         
-        # Create SPIFFS binary - direct copy without header
+        # Create LittleFS binary - direct copy without header
-        cp .pio/build/esp32dev/spiffs.bin .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
+        cp .pio/build/esp32dev/littlefs.bin .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
         
         # Create full binary
         (cd .pio/build/esp32dev && 
@@ -63,7 +63,7 @@ jobs:
           0x1000 bootloader.bin \
           0x8000 partitions.bin \
           0x10000 firmware.bin \
-          0x3D0000 spiffs.bin)
+          0x3D0000 littlefs.bin)
         
         # Verify file sizes
         echo "File sizes:"

.github/workflows/github-release.yml

@@ -39,16 +39,16 @@ jobs:
       run: |
         VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
         
-        # Always build firmware and SPIFFS
+        # Always build firmware and LittleFS
-        echo "Building firmware and SPIFFS..."
+        echo "Building firmware and LittleFS..."
         pio run -e esp32dev
         pio run -t buildfs
         
         # Copy firmware binary
         cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/upgrade_filaman_firmware_v${VERSION}.bin
         
-        # Create SPIFFS binary - direct copy without header
+        # Create LittleFS binary - direct copy without header
-        cp .pio/build/esp32dev/spiffs.bin .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
+        cp .pio/build/esp32dev/littlefs.bin .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
         
         # Create full binary (always)
         (cd .pio/build/esp32dev && 
@@ -61,7 +61,7 @@ jobs:
           0x1000 bootloader.bin \
           0x8000 partitions.bin \
           0x10000 firmware.bin \
-          0x3D0000 spiffs.bin)
+          0x3D0000 littlefs.bin)
         
         # Verify file sizes
         echo "File sizes:"
@@ -131,7 +131,7 @@ jobs:
           FILES_TO_UPLOAD="$FILES_TO_UPLOAD upgrade_filaman_firmware_v${VERSION}.bin"
         fi
         
-        # Add SPIFFS and full binary only if they exist
+        # Add LittleFS and full binary only if they exist
         if [ -f "upgrade_filaman_website_v${VERSION}.bin" ]; then
           FILES_TO_UPLOAD="$FILES_TO_UPLOAD upgrade_filaman_website_v${VERSION}.bin"
         fi

.vscode/settings.json

@@ -1,54 +0,0 @@
-{
-    "files.associations": {
-        "algorithm": "cpp",
-        "vector": "cpp",
-        "cmath": "cpp",
-        "array": "cpp",
-        "atomic": "cpp",
-        "*.tcc": "cpp",
-        "bitset": "cpp",
-        "cctype": "cpp",
-        "clocale": "cpp",
-        "cstdarg": "cpp",
-        "cstddef": "cpp",
-        "cstdint": "cpp",
-        "cstdio": "cpp",
-        "cstdlib": "cpp",
-        "cstring": "cpp",
-        "ctime": "cpp",
-        "cwchar": "cpp",
-        "cwctype": "cpp",
-        "deque": "cpp",
-        "unordered_map": "cpp",
-        "unordered_set": "cpp",
-        "exception": "cpp",
-        "functional": "cpp",
-        "iterator": "cpp",
-        "map": "cpp",
-        "memory": "cpp",
-        "memory_resource": "cpp",
-        "numeric": "cpp",
-        "optional": "cpp",
-        "random": "cpp",
-        "regex": "cpp",
-        "string": "cpp",
-        "string_view": "cpp",
-        "system_error": "cpp",
-        "tuple": "cpp",
-        "type_traits": "cpp",
-        "utility": "cpp",
-        "fstream": "cpp",
-        "initializer_list": "cpp",
-        "iomanip": "cpp",
-        "iosfwd": "cpp",
-        "istream": "cpp",
-        "limits": "cpp",
-        "new": "cpp",
-        "ostream": "cpp",
-        "sstream": "cpp",
-        "stdexcept": "cpp",
-        "streambuf": "cpp",
-        "cinttypes": "cpp",
-        "typeinfo": "cpp"
-    }
-}

CHANGELOG.md

@@ -1,5 +1,35 @@
 # Changelog
 
+## [1.4.0] - 2025-03-01
+### Added
+- add support for Spoolman Octoprint Plugin in README files
+- add OctoPrint integration with configurable fields and update functionality
+- add version comparison function and check for outdated versions before updates
+- remove unused version and protocol fields from JSON output; add error message for insufficient memory
+
+### Changed
+- update NFC tag references to include NTAG213 and clarify storage capacity
+- bump version to 1.4.0
+- remove unused version and protocol fields from NFC data packet
+- sort vendors alphabetically in the dropdown list
+- Merge pull request #10 from janecker/nfc-improvements
+- Improves NFC Tag handling
+
+
+## [1.3.99] - 2025-02-28
+### Changed
+- update platformio.ini for version v1.3.99
+- update workflows to build firmware with LittleFS instead of SPIFFS
+
+
+## [1.3.98] - 2025-02-28
+### Changed
+- update platformio.ini for version v1.3.98
+- migrate from SPIFFS to LittleFS for file handling
+- remove unused VSCode settings file
+- remove commented-out spoolman and filaman data from api.cpp
+
+
 ## [1.3.97] - 2025-02-28
 ### Added
 - füge Bestätigungsmeldung für Spool-Einstellung hinzu

README.de.md

@@ -8,7 +8,8 @@ Das System integriert sich nahtlos mit der [Spoolman](https://github.com/Donkie/
 
 Weitere Bilder finden Sie im [img Ordner](/img/)
 oder auf meiner Website: [FilaMan Website](https://www.filaman.app)  
-Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
+Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)  
+Discord Server: [https://discord.gg/vMAx2gf5](https://discord.gg/vMAx2gf5)
 
 ### Es gibt jetzt auch ein Wiki, dort sind nochmal alle Funktionen beschrieben: [Wiki](https://github.com/ManuelW77/Filaman/wiki)
 
@@ -18,7 +19,7 @@ Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaO
 - **OLED-Display:** Zeigt aktuelles Gewicht, Verbindungsstatus (WiFi, Bambu Lab, Spoolman).
 - **WLAN-Konnektivität:** WiFiManager für einfache Netzwerkkonfiguration.
 - **MQTT-Integration:** Verbindet sich mit Bambu Lab Drucker für AMS-Steuerung.
-- **NFC-Tag NTAG215:** Verwendung von NTAG215 wegen ausreichendem Speicherplatz auf dem Tag
+- **NFC-Tag NTAG213 NTAG215:** Verwendung von NTAG213, besser NTAG215 wegen ausreichendem Speicherplatz auf dem Tag
 
 ### Weboberflächen-Funktionen
 - **Echtzeit-Updates:** WebSocket-Verbindung für Live-Daten-Updates.
@@ -35,6 +36,7 @@ Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaO
   - Filtern und Auswählen von Filamenten.
   - Automatische Aktualisierung der Spulengewichte.
   - Verfolgung von NFC-Tag-Zuweisungen.
+  - Unterstützt das Spoolman Octoprint Plugin
 
 ### Wenn Sie meine Arbeit unterstützen möchten, freue ich mich über einen Kaffee
 <a href="https://www.buymeacoffee.com/manuelw" target="_blank"><img src="https://cdn.buymeacoffee.com/buttons/v2/default-yellow.png" alt="Buy Me A Coffee" style="height: 30px !important;width: 108px !important;" ></a>
@@ -61,7 +63,7 @@ Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaO
 [Amazon Link](https://amzn.eu/d/0AuBp2c)
 - **PN532 NFC NXP RFID-Modul V3:** Für NFC-Tag-Operationen.
 [Amazon Link](https://amzn.eu/d/jfIuQXb)
-- **NFC Tags Ntag215:** RFID Tag
+- **NFC Tags NTAG213 NTA215:** RFID Tag
 [Amazon Link](https://amzn.eu/d/9Z6mXc1)
 
 ### Pin-Konfiguration

README.md

@@ -6,12 +6,14 @@ FilaMan is a filament management system for 3D printing. It uses ESP32 hardware
 Users can manage filament spools, monitor the status of the Automatic Material System (AMS) and make settings via a web interface. 
 The system integrates seamlessly with [Bambulab](https://bambulab.com/en-us) 3D printers and [Spoolman](https://github.com/Donkie/Spoolman) filament management as well as the [Openspool](https://github.com/spuder/OpenSpool) NFC-TAG format.
 
+
 ![Scale](./img/scale_trans.png)
 
 
 More Images can be found in the [img Folder](/img/)  
-or my website:[FilaMan Website](https://www.filaman.app)  
+or my website: [FilaMan Website](https://www.filaman.app)  
-german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
+german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)  
+Discord Server: [https://discord.gg/vMAx2gf5](https://discord.gg/vMAx2gf5)
 
 ### Now more detailed informations about the usage: [Wiki](https://github.com/ManuelW77/Filaman/wiki)
 
@@ -21,7 +23,7 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
 - **OLED Display:** Shows current weight, connection status (WiFi, Bambu Lab, Spoolman).
 - **WiFi Connectivity:** WiFiManager for easy network configuration.
 - **MQTT Integration:** Connects to Bambu Lab printer for AMS control.
-- **NFC-Tag NTAG215:** Use NTAG215 because of enaught space on the Tag
+- **NFC-Tag NTAG213 NTAG215:** Use NTAG213, better NTAG215 because of enaught space on the Tag
 
 ### Web Interface Features
 - **Real-time Updates:** WebSocket connection for live data updates.
@@ -38,6 +40,7 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
   - Filter and select filaments.
   - Update spool weights automatically.
   - Track NFC tag assignments.
+  - Supports Spoolman Octoprint Plugin
 
 ### If you want to support my work, i would be happy to get a coffe
 <a href="https://www.buymeacoffee.com/manuelw" target="_blank"><img src="https://cdn.buymeacoffee.com/buttons/v2/default-yellow.png" alt="Buy Me A Coffee" style="height: 30px !important;width: 108px !important;" ></a>
@@ -64,7 +67,7 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
 [Amazon Link](https://amzn.eu/d/0AuBp2c)
 - **PN532 NFC NXP RFID-Modul V3:** For NFC tag operations.
 [Amazon Link](https://amzn.eu/d/jfIuQXb)
-- **NFC Tags Ntag215:** RFID Tag
+- **NFC Tags NTAG213 NTAG215:** RFID Tag
 [Amazon Link](https://amzn.eu/d/9Z6mXc1)
 
 

html/rfid.js

@@ -640,8 +640,6 @@ function writeNfcTag() {
 
     // Erstelle das NFC-Datenpaket mit korrekten Datentypen
     const nfcData = {
-        version: "2.0",
-        protocol: "openspool",
         color_hex: selectedSpool.filament.color_hex || "FFFFFF",
         type: selectedSpool.filament.material,
         min_temp: minTemp,

html/spoolman.html

@@ -52,11 +52,18 @@
             if (spoolmanUrl && spoolmanUrl.trim() !== "") {
                 document.getElementById('spoolmanUrl').value = spoolmanUrl;
             }
+            
+            // Initialize OctoPrint fields visibility
+            toggleOctoFields();
         };
 
         function checkSpoolmanInstance() {
             const url = document.getElementById('spoolmanUrl').value;
-            fetch(`/api/checkSpoolman?url=${encodeURIComponent(url)}`)
+            const spoolmanOctoEnabled = document.getElementById('spoolmanOctoEnabled').checked;
+            const spoolmanOctoUrl = document.getElementById('spoolmanOctoUrl').value;
+            const spoolmanOctoToken = document.getElementById('spoolmanOctoToken').value;
+            
+            fetch(`/api/checkSpoolman?url=${encodeURIComponent(url)}&octoEnabled=${spoolmanOctoEnabled}&octoUrl=${spoolmanOctoUrl}&octoToken=${spoolmanOctoToken}`)
                 .then(response => response.json())
                 .then(data => {
                     if (data.healthy) {
@@ -90,6 +97,15 @@
                     document.getElementById('bambuStatusMessage').innerText = 'Error while saving: ' + error.message;
                 });
         }
+
+        /**
+         * Controls visibility of OctoPrint configuration fields based on checkbox state
+         * Called on page load and when checkbox changes
+         */
+        function toggleOctoFields() {
+            const octoEnabled = document.getElementById('spoolmanOctoEnabled').checked;
+            document.getElementById('octoFields').style.display = octoEnabled ? 'block' : 'none';
+        }
     </script>
     <script>
         var spoolmanUrl = "{{spoolmanUrl}}";
@@ -102,6 +118,17 @@
             <div class="card-body">
                 <h5 class="card-title">Set URL/IP to your Spoolman-Instanz</h5>
                 <input type="text" id="spoolmanUrl" placeholder="http://ip-or-url-of-your-spoolman-instanz:port">
+                <h5 class="card-title">If you want to enable sending Spool to Spoolman Octoprint Plugin:</h5>
+                <p>
+                    <input type="checkbox" id="spoolmanOctoEnabled" {{spoolmanOctoEnabled}} onchange="toggleOctoFields()"> Send to Octo-Plugin
+                </p>
+                <div id="octoFields" style="display: none;">
+                    <p>
+                        <input type="text" id="spoolmanOctoUrl" placeholder="http://ip-or-url-of-your-octoprint-instanz:port" value="{{spoolmanOctoUrl}}">
+                        <input type="text" id="spoolmanOctoToken" placeholder="Your Octoprint Token" value="{{spoolmanOctoToken}}">
+                    </p>
+                </div>
+                
                 <button onclick="checkSpoolmanInstance()">Save Spoolman URL</button>
                 <p id="statusMessage"></p>
             </div>
@@ -127,11 +154,11 @@
                     <p>If activated, FilaMan will automatically update the next filled tray with the last scanned and weighed spool.</p>
                     <div class="input-group" style="display: flex; margin-bottom: 0;">
                         <label for="autoSend" style="width: 250px; margin-right: 5px;">Auto Send to Bambu:</label>
-                        <label for="autoSendTime" style="width: 250px; margin-right: 5px;">Wait time in Seconds:</label>
+                        <label for="autoSendTime" style="width: 250px; margin-right: 5px;">Wait for Spool in Sec:</label>
                     </div>
                     <div class="input-group" style="display: flex;">
                         <input type="checkbox" id="autoSend" {{autoSendToBambu}} style="width: 190px; margin-right: 10px;">
-                        <input type="text" id="autoSendTime" placeholder="Time to wait for new Spool" value="{{autoSendTime}}" style="width: 100px;">
+                        <input type="number" min="60" id="autoSendTime" placeholder="Time to wait" value="{{autoSendTime}}" style="width: 100px;">
                     </div>
 
                     <button style="margin: 0;" onclick="saveBambuCredentials()">Save Bambu Credentials</button>

html/spoolman.js

@@ -86,7 +86,7 @@ function populateVendorDropdown(data, selectedSmId = null) {
     });
 
     // Nach der Schleife: Formatierung der Gesamtlänge
-    console.log("Total Lenght: ", totalLength);
+    console.log("Total Length: ", totalLength);
     const formattedLength = totalLength > 1000 
         ? (totalLength / 1000).toFixed(2) + " km" 
         : totalLength.toFixed(2) + " m";
@@ -97,13 +97,15 @@ function populateVendorDropdown(data, selectedSmId = null) {
         ? (weightInKg / 1000).toFixed(2) + " t" 
         : weightInKg.toFixed(2) + " kg";
 
-    // Dropdown mit gefilterten Herstellern befüllen
+    // Dropdown mit gefilterten Herstellern befüllen - alphabetisch sortiert
-    Object.entries(filteredVendors).forEach(([id, name]) => {
+    Object.entries(filteredVendors)
-        const option = document.createElement("option");
+        .sort(([, nameA], [, nameB]) => nameA.localeCompare(nameB)) // Sort vendors alphabetically by name
-        option.value = id;
+        .forEach(([id, name]) => {
-        option.textContent = name;
+            const option = document.createElement("option");
-        vendorSelect.appendChild(option);
+            option.value = id;
-    });
+            option.textContent = name;
+            vendorSelect.appendChild(option);
+        });
 
     document.getElementById("totalSpools").textContent = totalSpools;
     document.getElementById("spoolsWithoutTag").textContent = spoolsWithoutTag;

html/style.css

@@ -188,14 +188,18 @@ label {
     font-weight: bold; 
 }
 
-input[type="text"], input[type="submit"] { 
+input[type="text"], input[type="submit"], input[type="number"] { 
     padding: 10px; 
     border: 1px solid #ccc; 
     border-radius: 5px; 
     font-size: 16px; 
 }
 
-input[type="text"]:focus { 
+input[type="number"] { 
+    width: 108px !important; 
+}
+
+input[type="text"]:focus, input[type="number"]:focus { 
     border-color: #007bff; 
     outline: none; 
 }

platformio.ini

@@ -9,7 +9,9 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [common]
-version = "1.3.97"
+version = "1.4.0"
+to_old_version = "1.4.0"
+
 ##
 [env:esp32dev]
 platform = espressif32
@@ -33,7 +35,8 @@ lib_deps =
     digitaldragon/SSLClient @ ^1.3.2
     
 ; Enable SPIFFS upload
-board_build.filesystem = spiffs
+#board_build.filesystem = spiffs
+board_build.filesystem = littlefs
 ; Update partition settings
 board_build.partitions = partitions.csv
 board_upload.flash_size = 4MB
@@ -44,13 +47,14 @@ build_flags =
     -Os
     -ffunction-sections
     -fdata-sections
-    -DNDEBUG
+    #-DNDEBUG
     -mtext-section-literals
     -DVERSION=\"${common.version}\"
+    -DTOOLDVERSION=\"${common.to_old_version}\"
     -DASYNCWEBSERVER_REGEX
-    -DCORE_DEBUG_LEVEL=3
+    #-DCORE_DEBUG_LEVEL=3
     -DCONFIG_ARDUHAL_LOG_COLORS=1
-    -DOTA_DEBUG=1
+    #-DOTA_DEBUG=1
     -DCONFIG_OPTIMIZATION_LEVEL_DEBUG=1
     -DBOOT_APP_PARTITION_OTA_0=1
     -DCONFIG_LWIP_TCP_MSL=60000

src/api.cpp

@@ -5,38 +5,17 @@
 
 bool spoolman_connected = false;
 String spoolmanUrl = "";
+bool octoEnabled = false;
+String octoUrl = "";
+String octoToken = "";
 
 struct SendToApiParams {
     String httpType;
     String spoolsUrl;
     String updatePayload;
+    String octoToken;
 };
 
-/*
-    // Spoolman Data
-    {
-        "version":"1.0",
-        "protocol":"openspool",
-        "color_hex":"AF7933",
-        "type":"ABS",
-        "min_temp":175,
-        "max_temp":275,
-        "brand":"Overture"
-    }
-
-    // FilaMan Data
-    {
-        "version":"1.0",
-        "protocol":"openspool",
-        "color_hex":"AF7933",
-        "type":"ABS",
-        "min_temp":175,
-        "max_temp":275,
-        "brand":"Overture",
-        "sm_id": 
-    }
-*/
-
 JsonDocument fetchSingleSpoolInfo(int spoolId) {
     HTTPClient http;
     String spoolsUrl = spoolmanUrl + apiUrl + "/spool/" + spoolId;
@@ -112,14 +91,16 @@ void sendToApi(void *parameter) {
     String httpType = params->httpType;
     String spoolsUrl = params->spoolsUrl;
     String updatePayload = params->updatePayload;
-    
+    String octoToken = params->octoToken;    
 
     HTTPClient http;
     http.begin(spoolsUrl);
     http.addHeader("Content-Type", "application/json");
+    if (octoEnabled && octoToken != "") http.addHeader("X-Api-Key", octoToken);
 
     int httpCode = http.PUT(updatePayload);
     if (httpType == "PATCH") httpCode = http.PATCH(updatePayload);
+    if (httpType == "POST") httpCode = http.POST(updatePayload);
 
     if (httpCode == HTTP_CODE_OK) {
         Serial.println("Spoolman erfolgreich aktualisiert");
@@ -223,6 +204,43 @@ uint8_t updateSpoolWeight(String spoolId, uint16_t weight) {
     return 1;
 }
 
+bool updateSpoolOcto(int spoolId) {
+    String spoolsUrl = octoUrl + "/plugin/Spoolman/selectSpool";
+    Serial.print("Update Spule in Octoprint mit URL: ");
+    Serial.println(spoolsUrl);
+
+    JsonDocument updateDoc;
+    updateDoc["spool_id"] = spoolId;
+    updateDoc["tool"] = "tool0";
+
+    String updatePayload;
+    serializeJson(updateDoc, updatePayload);
+    Serial.print("Update Payload: ");
+    Serial.println(updatePayload);
+
+    SendToApiParams* params = new SendToApiParams();
+    if (params == nullptr) {
+        Serial.println("Fehler: Kann Speicher für Task-Parameter nicht allokieren.");
+        return false;
+    }
+    params->httpType = "POST";
+    params->spoolsUrl = spoolsUrl;
+    params->updatePayload = updatePayload;
+    params->octoToken = octoToken;
+
+    // Erstelle die Task
+    BaseType_t result = xTaskCreate(
+        sendToApi,                // Task-Funktion
+        "SendToApiTask",          // Task-Name
+        4096,                     // Stackgröße in Bytes
+        (void*)params,            // Parameter
+        0,                        // Priorität
+        NULL                      // Task-Handle (nicht benötigt)
+    );
+
+    return true;
+}
+
 bool updateSpoolBambuData(String payload) {
     JsonDocument doc;
     DeserializationError error = deserializeJson(doc, payload);
@@ -460,17 +478,24 @@ bool checkSpoolmanInstance(const String& url) {
     return false;
 }
 
-bool saveSpoolmanUrl(const String& url) {
+bool saveSpoolmanUrl(const String& url, bool octoOn, const String& octoWh, const String& octoTk) {
     if (!checkSpoolmanInstance(url)) return false;
 
     JsonDocument doc;
     doc["url"] = url;
-    Serial.print("Speichere URL in Datei: ");
+    doc["octoEnabled"] = octoOn;
-    Serial.println(url);
+    doc["octoUrl"] = octoWh;
+    doc["octoToken"] = octoTk;
+    Serial.print("Speichere Spoolman Data in Datei: ");
+    Serial.println(doc.as<String>());
     if (!saveJsonValue("/spoolman_url.json", doc)) {
         Serial.println("Fehler beim Speichern der Spoolman-URL.");
+        return false;
     }
     spoolmanUrl = url;
+    octoEnabled = octoOn;
+    octoUrl = octoWh;
+    octoToken = octoTk;
 
     return true;
 }
@@ -478,6 +503,13 @@ bool saveSpoolmanUrl(const String& url) {
 String loadSpoolmanUrl() {
     JsonDocument doc;
     if (loadJsonValue("/spoolman_url.json", doc) && doc["url"].is<String>()) {
+        octoEnabled = (doc["octoEnabled"].is<bool>()) ? doc["octoEnabled"].as<bool>() : false;
+        if (octoEnabled && doc["octoToken"].is<String>() && doc["octoUrl"].is<String>())
+        {
+            octoUrl = doc["octoUrl"].as<String>();
+            octoToken = doc["octoToken"].as<String>();
+        }
+
         return doc["url"].as<String>();
     }
     Serial.println("Keine gültige Spoolman-URL gefunden.");

src/api.h

@@ -9,9 +9,12 @@
 
 extern bool spoolman_connected;
 extern String spoolmanUrl;
+extern bool octoEnabled;
+extern String octoUrl;
+extern String octoToken;
 
 bool checkSpoolmanInstance(const String& url);
-bool saveSpoolmanUrl(const String& url);
+bool saveSpoolmanUrl(const String& url, bool octoOn, const String& octoWh, const String& octoTk);
 String loadSpoolmanUrl(); // Neue Funktion zum Laden der URL
 bool checkSpoolmanExtraFields(); // Neue Funktion zum Überprüfen der Extrafelder
 JsonDocument fetchSingleSpoolInfo(int spoolId); // API-Funktion für die Webseite
@@ -19,5 +22,6 @@ bool updateSpoolTagId(String uidString, const char* payload); // Neue Funktion z
 uint8_t updateSpoolWeight(String spoolId, uint16_t weight); // Neue Funktion zum Aktualisieren des Gewichts
 bool initSpoolman(); // Neue Funktion zum Initialisieren von Spoolman
 bool updateSpoolBambuData(String payload); // Neue Funktion zum Aktualisieren der Bambu-Daten
+bool updateSpoolOcto(int spoolId); // Neue Funktion zum Aktualisieren der Octo-Daten
 
 #endif

src/bambu.cpp

@@ -341,7 +341,7 @@ void updateAmsWsData(JsonDocument& doc, JsonArray& amsArray, int& ams_count, Jso
             ams_data[i].trays[j].tray_color = trayObj["tray_color"].as<String>();
             ams_data[i].trays[j].nozzle_temp_min = trayObj["nozzle_temp_min"].as<int>();
             ams_data[i].trays[j].nozzle_temp_max = trayObj["nozzle_temp_max"].as<int>();
-            //ams_data[i].trays[j].setting_id = trayObj["setting_id"].as<String>();
+            if (trayObj["tray_type"].as<String>() == "") ams_data[i].trays[j].setting_id = "";
             ams_data[i].trays[j].cali_idx = trayObj["cali_idx"].as<String>();
         }
     }
@@ -425,16 +425,8 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
         return;
     }
 
-    // Wenn bambu auto set spool aktiv und eine spule erkannt und mqtt meldung das neue spule im ams
-    if (autoSendToBambu && autoSetToBambuSpoolId > 0 && 
-        doc["print"]["command"].as<String>() == "push_status" && doc["print"]["ams"]["tray_pre"].as<uint8_t>()
-        && !doc["print"]["ams"]["ams"].as<JsonArray>())
-    {
-        autoSetSpool(autoSetToBambuSpoolId, doc["print"]["ams"]["tray_pre"].as<uint8_t>());
-    }
-
     // Prüfen, ob "print->upgrade_state" und "print.ams.ams" existieren
-    if (doc["print"]["upgrade_state"].is<JsonObject>()) 
+    if (doc["print"]["upgrade_state"].is<JsonObject>() || (doc["print"]["command"].is<String>() && doc["print"]["command"] == "push_status")) 
     {
         // Prüfen ob AMS-Daten vorhanden sind
         if (!doc["print"]["ams"].is<JsonObject>() || !doc["print"]["ams"]["ams"].is<JsonArray>()) 
@@ -443,7 +435,7 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
         }
 
         JsonArray amsArray = doc["print"]["ams"]["ams"].as<JsonArray>();
-        
+
         // Prüfe ob sich die AMS-Daten geändert haben
         bool hasChanges = false;
         
@@ -479,6 +471,12 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
                     (trayObj["setting_id"].as<String>() != "" && trayObj["setting_id"].as<String>() != ams_data[storedIndex].trays[j].setting_id) ||
                     trayObj["cali_idx"].as<String>() != ams_data[storedIndex].trays[j].cali_idx) {
                     hasChanges = true;
+
+                    if (autoSendToBambu && autoSetToBambuSpoolId > 0 && hasChanges)
+                    {
+                        autoSetSpool(autoSetToBambuSpoolId, ams_data[storedIndex].trays[j].id);
+                    }
+
                     break;
                 }
             }
@@ -497,6 +495,11 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
                         (vtTray["setting_id"].as<String>() != "" && vtTray["setting_id"].as<String>() != ams_data[i].trays[0].setting_id) ||
                         (vtTray["tray_type"].as<String>() != "" && vtTray["cali_idx"].as<String>() != ams_data[i].trays[0].cali_idx)) {
                         hasChanges = true;
+
+                        if (autoSendToBambu && autoSetToBambuSpoolId > 0 && hasChanges)
+                        {
+                            autoSetSpool(autoSetToBambuSpoolId, 254);
+                        }
                     }
                     break;
                 }
@@ -600,7 +603,6 @@ void mqtt_loop(void * parameter) {
 bool setupMqtt() {
     // Wenn Bambu Daten vorhanden
     bool success = loadBambuCredentials();
-    vTaskDelay(100 / portTICK_PERIOD_MS);
 
     if (!success) {
         Serial.println("Failed to load Bambu credentials");
@@ -664,6 +666,7 @@ bool setupMqtt() {
 void bambu_restart() {
     if (BambuMqttTask) {
         vTaskDelete(BambuMqttTask);
+        delay(10);
     }
     setupMqtt();
 }

src/commonFS.cpp

@@ -1,8 +1,8 @@
 #include "commonFS.h"
-#include <SPIFFS.h>
+#include <LittleFS.h>
 
 bool saveJsonValue(const char* filename, const JsonDocument& doc) {
-    File file = SPIFFS.open(filename, "w");
+    File file = LittleFS.open(filename, "w");
     if (!file) {
         Serial.print("Fehler beim Öffnen der Datei zum Schreiben: ");
         Serial.println(filename);
@@ -20,7 +20,7 @@ bool saveJsonValue(const char* filename, const JsonDocument& doc) {
 }
 
 bool loadJsonValue(const char* filename, JsonDocument& doc) {
-    File file = SPIFFS.open(filename, "r");
+    File file = LittleFS.open(filename, "r");
     if (!file) {
         Serial.print("Fehler beim Öffnen der Datei zum Lesen: ");
         Serial.println(filename);
@@ -36,12 +36,12 @@ bool loadJsonValue(const char* filename, JsonDocument& doc) {
     return true;
 }
 
-void initializeSPIFFS() {
+void initializeFileSystem() {
-    if (!SPIFFS.begin(true, "/spiffs", 10, "spiffs")) {
+    if (!LittleFS.begin(true)) {
-        Serial.println("SPIFFS Mount Failed");
+        Serial.println("LittleFS Mount Failed");
         return;
     }
-    Serial.printf("SPIFFS Total: %u bytes\n", SPIFFS.totalBytes());
+    Serial.printf("LittleFS Total: %u bytes\n", LittleFS.totalBytes());
-    Serial.printf("SPIFFS Used: %u bytes\n", SPIFFS.usedBytes());
+    Serial.printf("LittleFS Used: %u bytes\n", LittleFS.usedBytes());
-    Serial.printf("SPIFFS Free: %u bytes\n", SPIFFS.totalBytes() - SPIFFS.usedBytes());
+    Serial.printf("LittleFS Free: %u bytes\n", LittleFS.totalBytes() - LittleFS.usedBytes());
 }

src/commonFS.h

@@ -2,11 +2,11 @@
 #define COMMONFS_H
 
 #include <Arduino.h>
-#include <SPIFFS.h>
 #include <ArduinoJson.h>
+#include <LittleFS.h>
 
 bool saveJsonValue(const char* filename, const JsonDocument& doc);
 bool loadJsonValue(const char* filename, JsonDocument& doc);
-void initializeSPIFFS();
+void initializeFileSystem();
 
 #endif

src/main.cpp

@@ -24,7 +24,7 @@ void setup() {
   Serial.printf("%08X\n", (uint32_t)chipid); //print Low 4bytes.
 
   // Initialize SPIFFS
-  initializeSPIFFS();
+  initializeFileSystem();
 
   // Start Display
   setupDisplay();
@@ -74,6 +74,21 @@ void setup() {
 }
 
 
+/**
+ * Safe interval check that handles millis() overflow
+ * @param currentTime Current millis() value
+ * @param lastTime Last recorded time
+ * @param interval Desired interval in milliseconds
+ * @return True if interval has elapsed
+ */
+bool intervalElapsed(unsigned long currentTime, unsigned long &lastTime, unsigned long interval) {
+  if (currentTime - lastTime >= interval || currentTime < lastTime) {
+    lastTime = currentTime;
+    return true;
+  }
+  return false;
+}
+
 unsigned long lastWeightReadTime = 0;
 const unsigned long weightReadInterval = 1000; // 1 second
 
@@ -81,9 +96,6 @@ unsigned long lastAutoSetBambuAmsTime = 0;
 const unsigned long autoSetBambuAmsInterval = 1000; // 1 second
 uint8_t autoAmsCounter = 0;
 
-unsigned long lastAmsSendTime = 0;
-const unsigned long amsSendInterval = 60000; // 1 minute
-
 uint8_t weightSend = 0;
 int16_t lastWeight = 0;
 
@@ -95,40 +107,33 @@ void loop() {
   unsigned long currentMillis = millis();
 
   // Überprüfe regelmäßig die WLAN-Verbindung
-  if (millis() - lastWifiCheckTime > wifiCheckInterval) {
+  if (intervalElapsed(currentMillis, lastWifiCheckTime, wifiCheckInterval)) {
     checkWiFiConnection();
-    lastWifiCheckTime = millis();
-  }
-
-  // Send AMS Data min every Minute
-  if (currentMillis - lastAmsSendTime >= amsSendInterval) 
-  {
-    lastAmsSendTime = currentMillis;
-    //sendAmsData(nullptr);
   }
 
   // Wenn Bambu auto set Spool aktiv
-  if (autoSendToBambu && autoSetToBambuSpoolId > 0 && currentMillis - lastAutoSetBambuAmsTime >= autoSetBambuAmsInterval) 
+  if (autoSendToBambu && autoSetToBambuSpoolId > 0) {
-  {
+    if (intervalElapsed(currentMillis, lastAutoSetBambuAmsTime, autoSetBambuAmsInterval)) 
-    if (hasReadRfidTag == 0)
     {
-      lastAutoSetBambuAmsTime = currentMillis;
+      if (hasReadRfidTag == 0)
-      oledShowMessage("Auto Set         " + String(autoSetBambuAmsCounter - autoAmsCounter) + "s");
+      {
-      autoAmsCounter++;
+        lastAutoSetBambuAmsTime = currentMillis;
-
+        oledShowMessage("Auto Set         " + String(autoSetBambuAmsCounter - autoAmsCounter) + "s");
-      if (autoAmsCounter >= autoSetBambuAmsCounter) 
+        autoAmsCounter++;
+
+        if (autoAmsCounter >= autoSetBambuAmsCounter) 
+        {
+          autoSetToBambuSpoolId = 0;
+          autoAmsCounter = 0;
+          oledShowWeight(weight);
+        }
+      }
+      else
       {
-        autoSetToBambuSpoolId = 0;
         autoAmsCounter = 0;
-        oledShowWeight(weight);
       }
     }
-    else
-    {
-      autoAmsCounter = 0;
-    }
   }
-  
 
   // Wenn Waage nicht Kalibriert
   if (scaleCalibrated == 3) 
@@ -192,6 +197,11 @@ void loop() {
       vTaskDelay(2000 / portTICK_PERIOD_MS);
       weightSend = 1;
       autoSetToBambuSpoolId = spoolId.toInt();
+
+      if (octoEnabled) 
+      {
+        updateSpoolOcto(autoSetToBambuSpoolId);
+      }
     }
     else
     {

src/nfc.cpp

@@ -44,8 +44,6 @@ void payloadToJson(uint8_t *data) {
       DeserializationError error = deserializeJson(doc, jsonString);
   
       if (!error) {
-        const char* version = doc["version"];
-        const char* protocol = doc["protocol"];
         const char* color_hex = doc["color_hex"];
         const char* type = doc["type"];
         int min_temp = doc["min_temp"];
@@ -55,8 +53,6 @@ void payloadToJson(uint8_t *data) {
         Serial.println();
         Serial.println("-----------------");
         Serial.println("JSON-Parsed Data:");
-        Serial.println(version);
-        Serial.println(protocol);
         Serial.println(color_hex);
         Serial.println(type);
         Serial.println(min_temp);
@@ -93,8 +89,16 @@ bool formatNdefTag() {
     return success;
   }
 
+uint16_t readTagSize()
+{
+  uint8_t buffer[4];
+  memset(buffer, 0, 4);
+  nfc.ntag2xx_ReadPage(3, buffer);
+  return buffer[2]*8;
+}
+
 uint8_t ntag2xx_WriteNDEF(const char *payload) {
-  uint8_t tagSize = 240; // 144 bytes is maximum for NTAG213
+  uint16_t tagSize = readTagSize();
   Serial.print("Tag Size: ");Serial.println(tagSize);
 
   uint8_t pageBuffer[4] = {0, 0, 0, 0};
@@ -136,6 +140,8 @@ uint8_t ntag2xx_WriteNDEF(const char *payload) {
   if (combinedData == NULL) 
   {
     Serial.println("Fehler: Nicht genug Speicher vorhanden.");
+    oledShowMessage("Tag too small");
+    vTaskDelay(2000 / portTICK_PERIOD_MS);
     return 0;
   }
 
@@ -369,46 +375,51 @@ void scanRfidTask(void * parameter) {
 
         if (uidLength == 7)
         {
-          uint8_t data[256];
+          uint16_t tagSize = readTagSize();
-
+          if(tagSize > 0)
-          // We probably have an NTAG2xx card (though it could be Ultralight as well)
-          Serial.println("Seems to be an NTAG2xx tag (7 byte UID)");
-          
-          for (uint8_t i = 0; i < 45; i++) {
-            /*
-            if (i < uidLength) {
-              uidString += String(uid[i], HEX);
-              if (i < uidLength - 1) {
-                  uidString += ":"; // Optional: Trennzeichen hinzufügen
-              }
-            }
-            */
-            if (!nfc.mifareclassic_ReadDataBlock(i, data + (i - 4) * 4)) 
-            {
-              break; // Stop if reading fails
-            }
-            // Check for NDEF message end
-            if (data[(i - 4) * 4] == 0xFE) 
-            {
-              break; // End of NDEF message
-            }
-
-            yield();
-            esp_task_wdt_reset();
-            vTaskDelay(pdMS_TO_TICKS(1));
-          }
-
-          if (!decodeNdefAndReturnJson(data)) 
           {
-            oledShowMessage("NFC-Tag unknown");
+            // Create a buffer depending on the size of the tag
-            vTaskDelay(2000 / portTICK_PERIOD_MS);
+            uint8_t* data = (uint8_t*)malloc(tagSize);
+            memset(data, 0, tagSize);
+
+            // We probably have an NTAG2xx card (though it could be Ultralight as well)
+            Serial.println("Seems to be an NTAG2xx tag (7 byte UID)");
+            
+            uint8_t numPages = readTagSize()/4;
+            for (uint8_t i = 4; i < 4+numPages; i++) {
+              if (!nfc.ntag2xx_ReadPage(i, data+(i-4) * 4))
+              {
+                break; // Stop if reading fails
+              }
+              // Check for NDEF message end
+              if (data[(i - 4) * 4] == 0xFE) 
+              {
+                break; // End of NDEF message
+              }
+
+              yield();
+              esp_task_wdt_reset();
+              vTaskDelay(pdMS_TO_TICKS(1));
+            }
+
+            if (!decodeNdefAndReturnJson(data)) 
+            {
+              oledShowMessage("NFC-Tag unknown");
+              vTaskDelay(2000 / portTICK_PERIOD_MS);
+              hasReadRfidTag = 2;
+            }
+            else 
+            {
+              hasReadRfidTag = 1;
+            }
+
+            free(data);
+          }
+          else
+          {
+            oledShowMessage("NFC-Tag read error");
             hasReadRfidTag = 2;
           }
-          else 
-          {
-            hasReadRfidTag = 1;
-          }
-         
         }
         else
         {

src/ota.cpp

@@ -14,11 +14,39 @@ static size_t updateTotalSize = 0;
 static size_t updateWritten = 0;
 static bool isSpiffsUpdate = false;
 
+/**
+ * Compares two version strings and determines if version1 is less than version2
+ * 
+ * @param version1 First version string (format: x.y.z)
+ * @param version2 Second version string (format: x.y.z)
+ * @return true if version1 is less than version2
+ */
+bool isVersionLessThan(const String& version1, const String& version2) {
+    int major1 = 0, minor1 = 0, patch1 = 0;
+    int major2 = 0, minor2 = 0, patch2 = 0;
+    
+    // Parse version1
+    sscanf(version1.c_str(), "%d.%d.%d", &major1, &minor1, &patch1);
+    
+    // Parse version2
+    sscanf(version2.c_str(), "%d.%d.%d", &major2, &minor2, &patch2);
+    
+    // Compare major version
+    if (major1 < major2) return true;
+    if (major1 > major2) return false;
+    
+    // Major versions equal, compare minor
+    if (minor1 < minor2) return true;
+    if (minor1 > minor2) return false;
+    
+    // Minor versions equal, compare patch
+    return patch1 < patch2;
+}
 
 void backupJsonConfigs() {
     // Bambu Credentials backup
-    if (SPIFFS.exists("/bambu_credentials.json")) {
+    if (LittleFS.exists("/bambu_credentials.json")) {
-        File file = SPIFFS.open("/bambu_credentials.json", "r");
+        File file = LittleFS.open("/bambu_credentials.json", "r");
         if (file) {
             bambuCredentialsBackup = file.readString();
             file.close();
@@ -27,8 +55,8 @@ void backupJsonConfigs() {
     }
 
     // Spoolman URL backup
-    if (SPIFFS.exists("/spoolman_url.json")) {
+    if (LittleFS.exists("/spoolman_url.json")) {
-        File file = SPIFFS.open("/spoolman_url.json", "r");
+        File file = LittleFS.open("/spoolman_url.json", "r");
         if (file) {
             spoolmanUrlBackup = file.readString();
             file.close();
@@ -40,7 +68,7 @@ void backupJsonConfigs() {
 void restoreJsonConfigs() {
     // Restore Bambu credentials
     if (bambuCredentialsBackup.length() > 0) {
-        File file = SPIFFS.open("/bambu_credentials.json", "w");
+        File file = LittleFS.open("/bambu_credentials.json", "w");
         if (file) {
             file.print(bambuCredentialsBackup);
             file.close();
@@ -51,7 +79,7 @@ void restoreJsonConfigs() {
 
     // Restore Spoolman URL
     if (spoolmanUrlBackup.length() > 0) {
-        File file = SPIFFS.open("/spoolman_url.json", "w");
+        File file = LittleFS.open("/spoolman_url.json", "w");
         if (file) {
             file.print(spoolmanUrlBackup);
             file.close();
@@ -111,6 +139,16 @@ void handleUpdate(AsyncWebServer &server) {
     updateHandler->setUri("/update");
     updateHandler->setMethod(HTTP_POST);
     
+    // Check if current version is less than defined TOOLVERSION before proceeding with update
+    if (isVersionLessThan(VERSION, TOOLDVERSION)) {
+        updateHandler->onRequest([](AsyncWebServerRequest *request) {
+            request->send(400, "application/json", 
+                "{\"success\":false,\"message\":\"Your current version is too old. Please perform a full upgrade.\"}");
+        });
+        server.addHandler(updateHandler);
+        return;
+    }
+
     updateHandler->onUpload([](AsyncWebServerRequest *request, String filename,
                              size_t index, uint8_t *data, size_t len, bool final) {
         if (!index) {

src/scale.cpp

@@ -47,7 +47,7 @@ void scale_loop(void * parameter) {
       weight = round(scale.get_units());
     }
     
-    vTaskDelay(pdMS_TO_TICKS(100)); // Verzögerung, um die CPU nicht zu überlasten
+    vTaskDelay(pdMS_TO_TICKS(100));
   }
 }
 
@@ -90,7 +90,7 @@ uint8_t start_scale() {
   BaseType_t result = xTaskCreatePinnedToCore(
     scale_loop, /* Function to implement the task */
     "ScaleLoop", /* Name of the task */
-    10000,  /* Stack size in words */
+    2048,  /* Stack size in words */
     NULL,  /* Task input parameter */
     scaleTaskPrio,  /* Priority of the task */
     &ScaleTask,  /* Task handle. */
@@ -110,6 +110,7 @@ uint8_t calibrate_scale() {
 
   //vTaskSuspend(RfidReaderTask);
   vTaskDelete(RfidReaderTask);
+  vTaskDelete(ScaleTask);
   pauseBambuMqttTask = true;
   pauseMainTask = 1;
 
@@ -177,8 +178,6 @@ uint8_t calibrate_scale() {
         vTaskDelay(pdMS_TO_TICKS(1));
         esp_task_wdt_reset();
       }
-
-      //ESP.restart();
     }
     else
     {
@@ -211,9 +210,8 @@ uint8_t calibrate_scale() {
   }
 
   oledShowMessage("Scale Ready");
-
   
-  Serial.println("starte Scale Task");
+  Serial.println("restart Scale Task");
   start_scale();
 
   pauseBambuMqttTask = false;

src/website.cpp

@@ -113,12 +113,12 @@ void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventTyp
 // Funktion zum Laden und Ersetzen des Headers in einer HTML-Datei
 String loadHtmlWithHeader(const char* filename) {
     Serial.println("Lade HTML-Datei: " + String(filename));
-    if (!SPIFFS.exists(filename)) {
+    if (!LittleFS.exists(filename)) {
         Serial.println("Fehler: Datei nicht gefunden!");
         return "Fehler: Datei nicht gefunden!";
     }
 
-    File file = SPIFFS.open(filename, "r");
+    File file = LittleFS.open(filename, "r");
     String html = file.readString();
     file.close();
 
@@ -195,7 +195,7 @@ void setupWebserver(AsyncWebServer &server) {
     // Route für about
     server.on("/about", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /about erhalten");
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/index.html.gz", "text/html");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/index.html.gz", "text/html");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -204,7 +204,7 @@ void setupWebserver(AsyncWebServer &server) {
     // Route für Waage
     server.on("/waage", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /waage erhalten");
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/waage.html.gz", "text/html");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/waage.html.gz", "text/html");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -213,7 +213,7 @@ void setupWebserver(AsyncWebServer &server) {
     // Route für RFID
     server.on("/", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /rfid erhalten");
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/rfid.html.gz", "text/html");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/rfid.html.gz", "text/html");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -229,7 +229,7 @@ void setupWebserver(AsyncWebServer &server) {
     // Route für WiFi
     server.on("/wifi", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /wifi erhalten");
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/wifi.html.gz", "text/html");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/wifi.html.gz", "text/html");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -239,7 +239,10 @@ void setupWebserver(AsyncWebServer &server) {
     server.on("/spoolman", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /spoolman erhalten");
         String html = loadHtmlWithHeader("/spoolman.html");
-        html.replace("{{spoolmanUrl}}", spoolmanUrl);
+        html.replace("{{spoolmanUrl}}", (spoolmanUrl != "") ? spoolmanUrl : "");
+        html.replace("{{spoolmanOctoEnabled}}", octoEnabled ? "checked" : "");
+        html.replace("{{spoolmanOctoUrl}}", (octoUrl != "") ? octoUrl : "");
+        html.replace("{{spoolmanOctoToken}}", (octoToken != "") ? octoToken : "");
 
         JsonDocument doc;
         if (loadJsonValue("/bambu_credentials.json", doc) && doc["bambu_ip"].is<String>()) 
@@ -277,10 +280,21 @@ void setupWebserver(AsyncWebServer &server) {
             return;
         }
 
+        if (request->getParam("octoEnabled")->value() == "true" && (!request->hasParam("octoUrl") || !request->hasParam("octoToken"))) {
+            request->send(400, "application/json", "{\"success\": false, \"error\": \"Missing OctoPrint URL or Token parameter\"}");
+            return;
+        }
+
         String url = request->getParam("url")->value();
+        bool octoEnabled = (request->getParam("octoEnabled")->value() == "true") ? true : false;
+        String octoUrl = request->getParam("octoUrl")->value();
+        String octoToken = (request->getParam("octoToken")->value() != "") ? request->getParam("octoToken")->value() : "";
+
         url.trim();
+        octoUrl.trim();
+        octoToken.trim();
         
-        bool healthy = saveSpoolmanUrl(url);
+        bool healthy = saveSpoolmanUrl(url, octoEnabled, octoUrl, octoToken);
         String jsonResponse = "{\"healthy\": " + String(healthy ? "true" : "false") + "}";
 
         request->send(200, "application/json", jsonResponse);
@@ -322,7 +336,7 @@ void setupWebserver(AsyncWebServer &server) {
     // Route für das Laden der CSS-Datei
     server.on("/style.css", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Lade style.css");
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/style.css.gz", "text/css");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/style.css.gz", "text/css");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -331,7 +345,7 @@ void setupWebserver(AsyncWebServer &server) {
 
     // Route für das Logo
     server.on("/logo.png", HTTP_GET, [](AsyncWebServerRequest *request){
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/logo.png.gz", "image/png");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/logo.png.gz", "image/png");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -340,7 +354,7 @@ void setupWebserver(AsyncWebServer &server) {
 
     // Route für Favicon
     server.on("/favicon.ico", HTTP_GET, [](AsyncWebServerRequest *request){
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/favicon.ico", "image/x-icon");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/favicon.ico", "image/x-icon");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
         Serial.println("favicon.ico gesendet");
@@ -348,7 +362,7 @@ void setupWebserver(AsyncWebServer &server) {
 
     // Route für spool_in.png
     server.on("/spool_in.png", HTTP_GET, [](AsyncWebServerRequest *request){
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/spool_in.png.gz", "image/png");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/spool_in.png.gz", "image/png");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -357,7 +371,7 @@ void setupWebserver(AsyncWebServer &server) {
 
     // Route für set_spoolman.png
     server.on("/set_spoolman.png", HTTP_GET, [](AsyncWebServerRequest *request){
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/set_spoolman.png.gz", "image/png");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/set_spoolman.png.gz", "image/png");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -367,7 +381,7 @@ void setupWebserver(AsyncWebServer &server) {
     // Route für JavaScript Dateien
     server.on("/spoolman.js", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /spoolman.js erhalten");
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/spoolman.js.gz", "text/javascript");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/spoolman.js.gz", "text/javascript");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -376,7 +390,7 @@ void setupWebserver(AsyncWebServer &server) {
 
     server.on("/rfid.js", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /rfid.js erhalten");
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS,"/rfid.js.gz", "text/javascript");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS,"/rfid.js.gz", "text/javascript");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -385,7 +399,7 @@ void setupWebserver(AsyncWebServer &server) {
 
     // Vereinfachter Update-Handler
     server.on("/upgrade", HTTP_GET, [](AsyncWebServerRequest *request) {
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/upgrade.html.gz", "text/html");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/upgrade.html.gz", "text/html");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", "no-store");
         request->send(response);