refactor: remove unnecessary delay in MQTT setup and add delay before restart

Improves NFC Tag handling

.github/workflows/gitea-release.yml

@@ -41,16 +41,16 @@ jobs:
       run: |
         VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
         
-        # Build firmware and SPIFFS
+        # Build firmware and LittleFS
-        echo "Building firmware and SPIFFS..."
+        echo "Building firmware and LittleFS..."
         pio run -e esp32dev
         pio run -t buildfs
         
         # Copy firmware binary
         cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/upgrade_filaman_firmware_v${VERSION}.bin
         
-        # Create SPIFFS binary - direct copy without header
+        # Create LittleFS binary - direct copy without header
-        cp .pio/build/esp32dev/spiffs.bin .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
+        cp .pio/build/esp32dev/littlefs.bin .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
         
         # Create full binary
         (cd .pio/build/esp32dev && 
@@ -63,7 +63,7 @@ jobs:
           0x1000 bootloader.bin \
           0x8000 partitions.bin \
           0x10000 firmware.bin \
-          0x3D0000 spiffs.bin)
+          0x3D0000 littlefs.bin)
         
         # Verify file sizes
         echo "File sizes:"

.github/workflows/github-release.yml

@@ -39,16 +39,16 @@ jobs:
       run: |
         VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
         
-        # Always build firmware and SPIFFS
+        # Always build firmware and LittleFS
-        echo "Building firmware and SPIFFS..."
+        echo "Building firmware and LittleFS..."
         pio run -e esp32dev
         pio run -t buildfs
         
         # Copy firmware binary
         cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/upgrade_filaman_firmware_v${VERSION}.bin
         
-        # Create SPIFFS binary - direct copy without header
+        # Create LittleFS binary - direct copy without header
-        cp .pio/build/esp32dev/spiffs.bin .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
+        cp .pio/build/esp32dev/littlefs.bin .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
         
         # Create full binary (always)
         (cd .pio/build/esp32dev && 
@@ -61,7 +61,7 @@ jobs:
           0x1000 bootloader.bin \
           0x8000 partitions.bin \
           0x10000 firmware.bin \
-          0x3D0000 spiffs.bin)
+          0x3D0000 littlefs.bin)
         
         # Verify file sizes
         echo "File sizes:"
@@ -131,7 +131,7 @@ jobs:
           FILES_TO_UPLOAD="$FILES_TO_UPLOAD upgrade_filaman_firmware_v${VERSION}.bin"
         fi
         
-        # Add SPIFFS and full binary only if they exist
+        # Add LittleFS and full binary only if they exist
         if [ -f "upgrade_filaman_website_v${VERSION}.bin" ]; then
           FILES_TO_UPLOAD="$FILES_TO_UPLOAD upgrade_filaman_website_v${VERSION}.bin"
         fi

.vscode/settings.json

@@ -1,54 +0,0 @@
-{
-    "files.associations": {
-        "algorithm": "cpp",
-        "vector": "cpp",
-        "cmath": "cpp",
-        "array": "cpp",
-        "atomic": "cpp",
-        "*.tcc": "cpp",
-        "bitset": "cpp",
-        "cctype": "cpp",
-        "clocale": "cpp",
-        "cstdarg": "cpp",
-        "cstddef": "cpp",
-        "cstdint": "cpp",
-        "cstdio": "cpp",
-        "cstdlib": "cpp",
-        "cstring": "cpp",
-        "ctime": "cpp",
-        "cwchar": "cpp",
-        "cwctype": "cpp",
-        "deque": "cpp",
-        "unordered_map": "cpp",
-        "unordered_set": "cpp",
-        "exception": "cpp",
-        "functional": "cpp",
-        "iterator": "cpp",
-        "map": "cpp",
-        "memory": "cpp",
-        "memory_resource": "cpp",
-        "numeric": "cpp",
-        "optional": "cpp",
-        "random": "cpp",
-        "regex": "cpp",
-        "string": "cpp",
-        "string_view": "cpp",
-        "system_error": "cpp",
-        "tuple": "cpp",
-        "type_traits": "cpp",
-        "utility": "cpp",
-        "fstream": "cpp",
-        "initializer_list": "cpp",
-        "iomanip": "cpp",
-        "iosfwd": "cpp",
-        "istream": "cpp",
-        "limits": "cpp",
-        "new": "cpp",
-        "ostream": "cpp",
-        "sstream": "cpp",
-        "stdexcept": "cpp",
-        "streambuf": "cpp",
-        "cinttypes": "cpp",
-        "typeinfo": "cpp"
-    }
-}

CHANGELOG.md

@@ -1,5 +1,75 @@
 # Changelog
 
+## [1.4.0] - 2025-03-01
+### Added
+- add support for Spoolman Octoprint Plugin in README files
+- add OctoPrint integration with configurable fields and update functionality
+- add version comparison function and check for outdated versions before updates
+- remove unused version and protocol fields from JSON output; add error message for insufficient memory
+
+### Changed
+- update NFC tag references to include NTAG213 and clarify storage capacity
+- bump version to 1.4.0
+- remove unused version and protocol fields from NFC data packet
+- sort vendors alphabetically in the dropdown list
+- Merge pull request #10 from janecker/nfc-improvements
+- Improves NFC Tag handling
+
+
+## [1.3.99] - 2025-02-28
+### Changed
+- update platformio.ini for version v1.3.99
+- update workflows to build firmware with LittleFS instead of SPIFFS
+
+
+## [1.3.98] - 2025-02-28
+### Changed
+- update platformio.ini for version v1.3.98
+- migrate from SPIFFS to LittleFS for file handling
+- remove unused VSCode settings file
+- remove commented-out spoolman and filaman data from api.cpp
+
+
+## [1.3.97] - 2025-02-28
+### Added
+- füge Bestätigungsmeldung für Spool-Einstellung hinzu
+- verbessere WLAN-Konfiguration und füge mDNS-Unterstützung hinzu
+- aktualisiere OLED-Anzeige mit Versionsnummer und verbessere Textausrichtung
+- füge regelmäßige WLAN-Verbindungsüberprüfung hinzu
+- aktualisiere Schaltplan-Bild
+- zeige Versionsnummer im OLED-Display an
+
+### Changed
+- update platformio.ini for version v1.3.97
+- entferne text-shadow von deaktivierten Schaltflächen
+- füge Link zum Wiki für detaillierte Informationen über die Nutzung hinzu
+
+### Fixed
+- Speichernutzung optimiert
+- behebe doppelte http.end() Aufrufe in checkSpoolmanExtraFields
+- optimiere Verzögerungen und Stackgrößen in NFC-Task-Funktionen
+- entferne ungenutzte Bibliotheken und Debug-Ausgaben aus main.cpp
+
+
+## [1.3.96] - 2025-02-25
+### Added
+- füge Unterstützung für Spoolman-Einstellungen hinzu und aktualisiere die Benutzeroberfläche
+- entferne die sendAmsData-Funktion aus der API-Schnittstelle
+- erweitere Bambu-Credentials um AutoSend-Zeit und aktualisiere die Benutzeroberfläche
+- erweitere Bambu-Credentials mit AutoSend-Wartezeit und aktualisiere die Benutzeroberfläche
+- add espRestart function and replace delay with vTaskDelay for OTA update process
+- implement OTA update functionality with backup and restore for configurations
+- add own_filaments.json and integrate custom filament loading in bambu.cpp
+
+### Changed
+- update platformio.ini for version v1.3.96
+
+### Fixed
+- aktualisiere Bedingungen für die AMS-Datenaktualisierung und entferne unnötige Aufrufe
+- aktualisiere Bedingung für den Fortschritt der OTA-Update-Nachricht
+- update auto set logic to check RFID tag before setting Bambu spool
+
+
 ## [1.3.95] - 2025-02-24
 ### Changed
 - update webpages for version v1.3.95

README.de.md

@@ -9,6 +9,9 @@ Das System integriert sich nahtlos mit der [Spoolman](https://github.com/Donkie/
 Weitere Bilder finden Sie im [img Ordner](/img/)
 oder auf meiner Website: [FilaMan Website](https://www.filaman.app)  
 Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)  
+Discord Server: [https://discord.gg/vMAx2gf5](https://discord.gg/vMAx2gf5)
+
+### Es gibt jetzt auch ein Wiki, dort sind nochmal alle Funktionen beschrieben: [Wiki](https://github.com/ManuelW77/Filaman/wiki)
 
 ### ESP32 Hardware-Funktionen
 - **Gewichtsmessung:** Verwendung einer Wägezelle mit HX711-Verstärker für präzise Gewichtsverfolgung.
@@ -16,7 +19,7 @@ Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaO
 - **OLED-Display:** Zeigt aktuelles Gewicht, Verbindungsstatus (WiFi, Bambu Lab, Spoolman).
 - **WLAN-Konnektivität:** WiFiManager für einfache Netzwerkkonfiguration.
 - **MQTT-Integration:** Verbindet sich mit Bambu Lab Drucker für AMS-Steuerung.
-- **NFC-Tag NTAG215:** Verwendung von NTAG215 wegen ausreichendem Speicherplatz auf dem Tag
+- **NFC-Tag NTAG213 NTAG215:** Verwendung von NTAG213, besser NTAG215 wegen ausreichendem Speicherplatz auf dem Tag
 
 ### Weboberflächen-Funktionen
 - **Echtzeit-Updates:** WebSocket-Verbindung für Live-Daten-Updates.
@@ -33,6 +36,7 @@ Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaO
   - Filtern und Auswählen von Filamenten.
   - Automatische Aktualisierung der Spulengewichte.
   - Verfolgung von NFC-Tag-Zuweisungen.
+  - Unterstützt das Spoolman Octoprint Plugin
 
 ### Wenn Sie meine Arbeit unterstützen möchten, freue ich mich über einen Kaffee
 <a href="https://www.buymeacoffee.com/manuelw" target="_blank"><img src="https://cdn.buymeacoffee.com/buttons/v2/default-yellow.png" alt="Buy Me A Coffee" style="height: 30px !important;width: 108px !important;" ></a>
@@ -59,7 +63,7 @@ Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaO
 [Amazon Link](https://amzn.eu/d/0AuBp2c)
 - **PN532 NFC NXP RFID-Modul V3:** Für NFC-Tag-Operationen.
 [Amazon Link](https://amzn.eu/d/jfIuQXb)
-- **NFC Tags Ntag215:** RFID Tag
+- **NFC Tags NTAG213 NTA215:** RFID Tag
 [Amazon Link](https://amzn.eu/d/9Z6mXc1)
 
 ### Pin-Konfiguration

README.md

@@ -6,12 +6,16 @@ FilaMan is a filament management system for 3D printing. It uses ESP32 hardware
 Users can manage filament spools, monitor the status of the Automatic Material System (AMS) and make settings via a web interface. 
 The system integrates seamlessly with [Bambulab](https://bambulab.com/en-us) 3D printers and [Spoolman](https://github.com/Donkie/Spoolman) filament management as well as the [Openspool](https://github.com/spuder/OpenSpool) NFC-TAG format.
 
+
 ![Scale](./img/scale_trans.png)
 
 
 More Images can be found in the [img Folder](/img/)  
 or my website: [FilaMan Website](https://www.filaman.app)  
 german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)  
+Discord Server: [https://discord.gg/vMAx2gf5](https://discord.gg/vMAx2gf5)
+
+### Now more detailed informations about the usage: [Wiki](https://github.com/ManuelW77/Filaman/wiki)
 
 ### ESP32 Hardware Features
 - **Weight Measurement:** Using a load cell with HX711 amplifier for precise weight tracking.
@@ -19,7 +23,7 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
 - **OLED Display:** Shows current weight, connection status (WiFi, Bambu Lab, Spoolman).
 - **WiFi Connectivity:** WiFiManager for easy network configuration.
 - **MQTT Integration:** Connects to Bambu Lab printer for AMS control.
-- **NFC-Tag NTAG215:** Use NTAG215 because of enaught space on the Tag
+- **NFC-Tag NTAG213 NTAG215:** Use NTAG213, better NTAG215 because of enaught space on the Tag
 
 ### Web Interface Features
 - **Real-time Updates:** WebSocket connection for live data updates.
@@ -36,6 +40,7 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
   - Filter and select filaments.
   - Update spool weights automatically.
   - Track NFC tag assignments.
+  - Supports Spoolman Octoprint Plugin
 
 ### If you want to support my work, i would be happy to get a coffe
 <a href="https://www.buymeacoffee.com/manuelw" target="_blank"><img src="https://cdn.buymeacoffee.com/buttons/v2/default-yellow.png" alt="Buy Me A Coffee" style="height: 30px !important;width: 108px !important;" ></a>
@@ -62,7 +67,7 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
 [Amazon Link](https://amzn.eu/d/0AuBp2c)
 - **PN532 NFC NXP RFID-Modul V3:** For NFC tag operations.
 [Amazon Link](https://amzn.eu/d/jfIuQXb)
-- **NFC Tags Ntag215:** RFID Tag
+- **NFC Tags NTAG213 NTAG215:** RFID Tag
 [Amazon Link](https://amzn.eu/d/9Z6mXc1)
 
 

html/own_filaments.json

@@ -0,0 +1,31 @@
+{
+    "TPU": "GFU99",
+    "PA": "GFN99",
+    "PA-CF": "GFN98",
+    "PLA": "GFL99",
+    "PLA Silk": "GFL96",
+    "PLA-CF": "GFL98",
+    "PLA High Speed": "GFL95",
+    "PETG": "GFG99",
+    "PETG-CF": "GFG98",
+    "PCTG": "GFG97",
+    "ABS": "GFB99",
+    "ABS+HS": "GFB99",
+    "PC": "GFC99",
+    "PC/ABS": "GFC99",
+    "ASA": "GFB98",
+    "PVA": "GFS99",
+    "HIPS": "GFS98",
+    "PPS-CF": "GFT98",
+    "PPS": "GFT97",
+    "PPA-CF": "GFN97",
+    "PPA-GF": "GFN96",
+    "PE": "GFP99",
+    "PE-CF": "GFP98",
+    "PP": "GFP97",
+    "PP-CF": "GFP96",
+    "PP-GF": "GFP95",
+    "EVA": "GFR99",
+    "PHA": "GFR98",
+    "BVOH": "GFS97"
+}

html/rfid.js

@@ -150,6 +150,13 @@ function initWebSocket() {
                     ramStatus.textContent = `${data.freeHeap}k`;
                 }
             }
+            else if (data.type === 'setSpoolmanSettings') {
+                if (data.payload == 'success') {
+                    showNotification(`Spoolman Settings set successfully`, true);
+                } else {
+                    showNotification(`Error setting Spoolman Settings`, false);
+                }
+            }
         };
     } catch (error) {
         isConnected = false;
@@ -285,6 +292,14 @@ function displayAmsData(amsData) {
                     <img src="spool_in.png" alt="Spool In" style="width: 48px; height: 48px; transform: rotate(180deg) scaleX(-1);">
                 </button>`;
 
+            const spoolmanButtonHtml = `
+                <button class="spool-button" onclick="handleSpoolmanSettings('${tray.tray_info_idx}', '${tray.setting_id}', '${tray.cali_idx}', '${tray.nozzle_temp_min}', '${tray.nozzle_temp_max}')" 
+                        style="position: absolute; bottom: 0px; right: 0px; 
+                               background: none; border: none; padding: 0; 
+                               cursor: pointer; display: none;">
+                    <img src="set_spoolman.png" alt="Spool In" style="width: 38px; height: 38px;">
+                </button>`;
+
             if (!hasAnyContent) {
                 return `
                     <div class="tray">
@@ -348,6 +363,7 @@ function displayAmsData(amsData) {
                         ${trayDetails}
                         ${tempHTML}
                         ${(ams.ams_id === 255 && tray.tray_type !== '') ? outButtonHtml : ''}
+                        ${(tray.setting_id != "" && tray.setting_id != "null") ? spoolmanButtonHtml : ''}
                     </div>
                     
                 </div>`;
@@ -373,6 +389,36 @@ function updateSpoolButtons(show) {
     });
 }
 
+function handleSpoolmanSettings(tray_info_idx, setting_id, cali_idx, nozzle_temp_min, nozzle_temp_max) {
+    // Hole das ausgewählte Filament
+    const selectedText = document.getElementById("selected-filament").textContent;
+
+    // Finde die ausgewählte Spule in den Daten
+    const selectedSpool = spoolsData.find(spool => 
+        `${spool.id} | ${spool.filament.name} (${spool.filament.material})` === selectedText
+    );
+
+    const payload = {
+        type: 'setSpoolmanSettings',
+        payload: {
+            filament_id: selectedSpool.filament.id,
+            tray_info_idx: tray_info_idx,
+            setting_id: setting_id,
+            cali_idx: cali_idx,
+            temp_min: nozzle_temp_min,
+            temp_max: nozzle_temp_max
+        }
+    };
+
+    try {
+        socket.send(JSON.stringify(payload));
+        showNotification(`Setting send to Spoolman`, true);
+    } catch (error) {
+        console.error("Error while sending settings to Spoolman:", error);
+        showNotification("Error while sending!", false);
+    }
+}
+
 function handleSpoolOut() {
     // Erstelle Payload
     const payload = {
@@ -594,8 +640,6 @@ function writeNfcTag() {
 
     // Erstelle das NFC-Datenpaket mit korrekten Datentypen
     const nfcData = {
-        version: "2.0",
-        protocol: "openspool",
         color_hex: selectedSpool.filament.color_hex || "FFFFFF",
         type: selectedSpool.filament.material,
         min_temp: minTemp,

html/spoolman.html

@@ -52,11 +52,18 @@
             if (spoolmanUrl && spoolmanUrl.trim() !== "") {
                 document.getElementById('spoolmanUrl').value = spoolmanUrl;
             }
+            
+            // Initialize OctoPrint fields visibility
+            toggleOctoFields();
         };
 
         function checkSpoolmanInstance() {
             const url = document.getElementById('spoolmanUrl').value;
-            fetch(`/api/checkSpoolman?url=${encodeURIComponent(url)}`)
+            const spoolmanOctoEnabled = document.getElementById('spoolmanOctoEnabled').checked;
+            const spoolmanOctoUrl = document.getElementById('spoolmanOctoUrl').value;
+            const spoolmanOctoToken = document.getElementById('spoolmanOctoToken').value;
+            
+            fetch(`/api/checkSpoolman?url=${encodeURIComponent(url)}&octoEnabled=${spoolmanOctoEnabled}&octoUrl=${spoolmanOctoUrl}&octoToken=${spoolmanOctoToken}`)
                 .then(response => response.json())
                 .then(data => {
                     if (data.healthy) {
@@ -75,8 +82,9 @@
             const serial = document.getElementById('bambuSerial').value;
             const code = document.getElementById('bambuCode').value;
             const autoSend = document.getElementById('autoSend').checked;
+            const autoSendTime = document.getElementById('autoSendTime').value;
 
-            fetch(`/api/bambu?bambu_ip=${encodeURIComponent(ip)}&bambu_serialnr=${encodeURIComponent(serial)}&bambu_accesscode=${encodeURIComponent(code)}&autoSend=${autoSend}`)
+            fetch(`/api/bambu?bambu_ip=${encodeURIComponent(ip)}&bambu_serialnr=${encodeURIComponent(serial)}&bambu_accesscode=${encodeURIComponent(code)}&autoSend=${autoSend}&autoSendTime=${autoSendTime}`)
                 .then(response => response.json())
                 .then(data => {
                     if (data.healthy) {
@@ -89,6 +97,15 @@
                     document.getElementById('bambuStatusMessage').innerText = 'Error while saving: ' + error.message;
                 });
         }
+
+        /**
+         * Controls visibility of OctoPrint configuration fields based on checkbox state
+         * Called on page load and when checkbox changes
+         */
+        function toggleOctoFields() {
+            const octoEnabled = document.getElementById('spoolmanOctoEnabled').checked;
+            document.getElementById('octoFields').style.display = octoEnabled ? 'block' : 'none';
+        }
     </script>
     <script>
         var spoolmanUrl = "{{spoolmanUrl}}";
@@ -101,6 +118,17 @@
             <div class="card-body">
                 <h5 class="card-title">Set URL/IP to your Spoolman-Instanz</h5>
                 <input type="text" id="spoolmanUrl" placeholder="http://ip-or-url-of-your-spoolman-instanz:port">
+                <h5 class="card-title">If you want to enable sending Spool to Spoolman Octoprint Plugin:</h5>
+                <p>
+                    <input type="checkbox" id="spoolmanOctoEnabled" {{spoolmanOctoEnabled}} onchange="toggleOctoFields()"> Send to Octo-Plugin
+                </p>
+                <div id="octoFields" style="display: none;">
+                    <p>
+                        <input type="text" id="spoolmanOctoUrl" placeholder="http://ip-or-url-of-your-octoprint-instanz:port" value="{{spoolmanOctoUrl}}">
+                        <input type="text" id="spoolmanOctoToken" placeholder="Your Octoprint Token" value="{{spoolmanOctoToken}}">
+                    </p>
+                </div>
+                
                 <button onclick="checkSpoolmanInstance()">Save Spoolman URL</button>
                 <p id="statusMessage"></p>
             </div>
@@ -122,13 +150,18 @@
                         <label for="bambuCode">Access Code:</label>
                         <input type="text" id="bambuCode" placeholder="Access Code vom Drucker" value="{{bambuCode}}">
                     </div>
-                    <div class="input-group">
+                    <hr>
-                        If activated, FilaMan will automatically update the next filled tray with the last scanned and weighed spool.
+                    <p>If activated, FilaMan will automatically update the next filled tray with the last scanned and weighed spool.</p>
-                        <label for="autoSend">Auto Send to Bambu:</label>
+                    <div class="input-group" style="display: flex; margin-bottom: 0;">
-                        <input type="checkbox" id="autoSend" {{autoSendToBambu}}>
+                        <label for="autoSend" style="width: 250px; margin-right: 5px;">Auto Send to Bambu:</label>
+                        <label for="autoSendTime" style="width: 250px; margin-right: 5px;">Wait for Spool in Sec:</label>
+                    </div>
+                    <div class="input-group" style="display: flex;">
+                        <input type="checkbox" id="autoSend" {{autoSendToBambu}} style="width: 190px; margin-right: 10px;">
+                        <input type="number" min="60" id="autoSendTime" placeholder="Time to wait" value="{{autoSendTime}}" style="width: 100px;">
                     </div>
 
-                    <button onclick="saveBambuCredentials()">Save Bambu Credentials</button>
+                    <button style="margin: 0;" onclick="saveBambuCredentials()">Save Bambu Credentials</button>
                     <p id="bambuStatusMessage"></p>
                 </div>
             </div>

html/spoolman.js

@@ -86,7 +86,7 @@ function populateVendorDropdown(data, selectedSmId = null) {
     });
 
     // Nach der Schleife: Formatierung der Gesamtlänge
-    console.log("Total Lenght: ", totalLength);
+    console.log("Total Length: ", totalLength);
     const formattedLength = totalLength > 1000 
         ? (totalLength / 1000).toFixed(2) + " km" 
         : totalLength.toFixed(2) + " m";
@@ -97,8 +97,10 @@ function populateVendorDropdown(data, selectedSmId = null) {
         ? (weightInKg / 1000).toFixed(2) + " t" 
         : weightInKg.toFixed(2) + " kg";
 
-    // Dropdown mit gefilterten Herstellern befüllen
+    // Dropdown mit gefilterten Herstellern befüllen - alphabetisch sortiert
-    Object.entries(filteredVendors).forEach(([id, name]) => {
+    Object.entries(filteredVendors)
+        .sort(([, nameA], [, nameB]) => nameA.localeCompare(nameB)) // Sort vendors alphabetically by name
+        .forEach(([id, name]) => {
             const option = document.createElement("option");
             option.value = id;
             option.textContent = name;

html/style.css

@@ -188,14 +188,18 @@ label {
     font-weight: bold; 
 }
 
-input[type="text"], input[type="submit"] { 
+input[type="text"], input[type="submit"], input[type="number"] { 
     padding: 10px; 
     border: 1px solid #ccc; 
     border-radius: 5px; 
     font-size: 16px; 
 }
 
-input[type="text"]:focus { 
+input[type="number"] { 
+    width: 108px !important; 
+}
+
+input[type="text"]:focus, input[type="number"]:focus { 
     border-color: #007bff; 
     outline: none; 
 }
@@ -761,17 +765,19 @@ a:hover {
     right: 20px;
     padding: 15px 25px;
     border-radius: 4px;
-    color: white;
+    color: black;
     z-index: 1000;
     animation: slideIn 0.3s ease-out;
 }
 
 .notification.success {
     background-color: #28a745;
+    color: black !important;
 }
 
 .notification.error {
     background-color: #dc3545;
+    color: white !important;
 }
 
 .notification.fade-out {
@@ -1013,6 +1019,7 @@ input[type="submit"]:disabled,
     color: #000;
     vertical-align: middle;
     margin-left: 0.5rem;
+    text-shadow: none !important;
 }
 
 .progress-container {

platformio.ini

@@ -9,7 +9,9 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [common]
-version = "1.3.95"
+version = "1.4.0"
+to_old_version = "1.4.0"
+
 ##
 [env:esp32dev]
 platform = espressif32
@@ -33,7 +35,8 @@ lib_deps =
     digitaldragon/SSLClient @ ^1.3.2
     
 ; Enable SPIFFS upload
-board_build.filesystem = spiffs
+#board_build.filesystem = spiffs
+board_build.filesystem = littlefs
 ; Update partition settings
 board_build.partitions = partitions.csv
 board_upload.flash_size = 4MB
@@ -44,13 +47,14 @@ build_flags =
     -Os
     -ffunction-sections
     -fdata-sections
-    -DNDEBUG
+    #-DNDEBUG
     -mtext-section-literals
     -DVERSION=\"${common.version}\"
+    -DTOOLDVERSION=\"${common.to_old_version}\"
     -DASYNCWEBSERVER_REGEX
-    -DCORE_DEBUG_LEVEL=3
+    #-DCORE_DEBUG_LEVEL=3
     -DCONFIG_ARDUHAL_LOG_COLORS=1
-    -DOTA_DEBUG=1
+    #-DOTA_DEBUG=1
     -DCONFIG_OPTIMIZATION_LEVEL_DEBUG=1
     -DBOOT_APP_PARTITION_OTA_0=1
     -DCONFIG_LWIP_TCP_MSL=60000

src/api.cpp

@@ -5,38 +5,17 @@
 
 bool spoolman_connected = false;
 String spoolmanUrl = "";
+bool octoEnabled = false;
+String octoUrl = "";
+String octoToken = "";
 
 struct SendToApiParams {
     String httpType;
     String spoolsUrl;
     String updatePayload;
+    String octoToken;
 };
 
-/*
-    // Spoolman Data
-    {
-        "version":"1.0",
-        "protocol":"openspool",
-        "color_hex":"AF7933",
-        "type":"ABS",
-        "min_temp":175,
-        "max_temp":275,
-        "brand":"Overture"
-    }
-
-    // FilaMan Data
-    {
-        "version":"1.0",
-        "protocol":"openspool",
-        "color_hex":"AF7933",
-        "type":"ABS",
-        "min_temp":175,
-        "max_temp":275,
-        "brand":"Overture",
-        "sm_id": 
-    }
-*/
-
 JsonDocument fetchSingleSpoolInfo(int spoolId) {
     HTTPClient http;
     String spoolsUrl = spoolmanUrl + apiUrl + "/spool/" + spoolId;
@@ -112,19 +91,21 @@ void sendToApi(void *parameter) {
     String httpType = params->httpType;
     String spoolsUrl = params->spoolsUrl;
     String updatePayload = params->updatePayload;
-    
+    String octoToken = params->octoToken;    
 
     HTTPClient http;
     http.begin(spoolsUrl);
     http.addHeader("Content-Type", "application/json");
+    if (octoEnabled && octoToken != "") http.addHeader("X-Api-Key", octoToken);
 
     int httpCode = http.PUT(updatePayload);
     if (httpType == "PATCH") httpCode = http.PATCH(updatePayload);
+    if (httpType == "POST") httpCode = http.POST(updatePayload);
 
     if (httpCode == HTTP_CODE_OK) {
-        Serial.println("Gewicht der Spule erfolgreich aktualisiert");
+        Serial.println("Spoolman erfolgreich aktualisiert");
     } else {
-        Serial.println("Fehler beim Aktualisieren des Gewichts der Spule");
+        Serial.println("Fehler beim Senden an Spoolman!");
         oledShowMessage("Spoolman update failed");
         vTaskDelay(2000 / portTICK_PERIOD_MS);
     }
@@ -223,6 +204,89 @@ uint8_t updateSpoolWeight(String spoolId, uint16_t weight) {
     return 1;
 }
 
+bool updateSpoolOcto(int spoolId) {
+    String spoolsUrl = octoUrl + "/plugin/Spoolman/selectSpool";
+    Serial.print("Update Spule in Octoprint mit URL: ");
+    Serial.println(spoolsUrl);
+
+    JsonDocument updateDoc;
+    updateDoc["spool_id"] = spoolId;
+    updateDoc["tool"] = "tool0";
+
+    String updatePayload;
+    serializeJson(updateDoc, updatePayload);
+    Serial.print("Update Payload: ");
+    Serial.println(updatePayload);
+
+    SendToApiParams* params = new SendToApiParams();
+    if (params == nullptr) {
+        Serial.println("Fehler: Kann Speicher für Task-Parameter nicht allokieren.");
+        return false;
+    }
+    params->httpType = "POST";
+    params->spoolsUrl = spoolsUrl;
+    params->updatePayload = updatePayload;
+    params->octoToken = octoToken;
+
+    // Erstelle die Task
+    BaseType_t result = xTaskCreate(
+        sendToApi,                // Task-Funktion
+        "SendToApiTask",          // Task-Name
+        4096,                     // Stackgröße in Bytes
+        (void*)params,            // Parameter
+        0,                        // Priorität
+        NULL                      // Task-Handle (nicht benötigt)
+    );
+
+    return true;
+}
+
+bool updateSpoolBambuData(String payload) {
+    JsonDocument doc;
+    DeserializationError error = deserializeJson(doc, payload);
+    if (error) {
+        Serial.print("Fehler beim JSON-Parsing: ");
+        Serial.println(error.c_str());
+        return false;
+    }
+
+    String spoolsUrl = spoolmanUrl + apiUrl + "/filament/" + doc["filament_id"].as<String>();
+    Serial.print("Update Spule mit URL: ");
+    Serial.println(spoolsUrl);
+
+    JsonDocument updateDoc;
+    updateDoc["extra"]["bambu_setting_id"] = "\"" + doc["setting_id"].as<String>() + "\"";
+    updateDoc["extra"]["bambu_cali_id"] = "\"" + doc["cali_idx"].as<String>() + "\"";
+    updateDoc["extra"]["bambu_idx"] = "\"" + doc["tray_info_idx"].as<String>() + "\"";
+    updateDoc["extra"]["nozzle_temperature"] = "[" + doc["temp_min"].as<String>() + "," + doc["temp_max"].as<String>() + "]";
+
+    String updatePayload;
+    serializeJson(updateDoc, updatePayload);
+    Serial.print("Update Payload: ");
+    Serial.println(updatePayload);
+
+    SendToApiParams* params = new SendToApiParams();
+    if (params == nullptr) {
+        Serial.println("Fehler: Kann Speicher für Task-Parameter nicht allokieren.");
+        return false;
+    }
+    params->httpType = "PATCH";
+    params->spoolsUrl = spoolsUrl;
+    params->updatePayload = updatePayload;
+
+    // Erstelle die Task
+    BaseType_t result = xTaskCreate(
+        sendToApi,                // Task-Funktion
+        "SendToApiTask",          // Task-Name
+        4096,                     // Stackgröße in Bytes
+        (void*)params,            // Parameter
+        0,                        // Priorität
+        NULL                      // Task-Handle (nicht benötigt)
+    );
+
+    return true;
+}
+
 // #### Spoolman init
 bool checkSpoolmanExtraFields() {
     HTTPClient http;
@@ -364,12 +428,13 @@ bool checkSpoolmanExtraFields() {
                 }
             }
         }
-        http.end();  
     }
     
     Serial.println("-------- ENDE Prüfe Felder --------");
     Serial.println();
 
+    http.end();
+
     return true;
 }
 
@@ -413,17 +478,24 @@ bool checkSpoolmanInstance(const String& url) {
     return false;
 }
 
-bool saveSpoolmanUrl(const String& url) {
+bool saveSpoolmanUrl(const String& url, bool octoOn, const String& octoWh, const String& octoTk) {
     if (!checkSpoolmanInstance(url)) return false;
 
     JsonDocument doc;
     doc["url"] = url;
-    Serial.print("Speichere URL in Datei: ");
+    doc["octoEnabled"] = octoOn;
-    Serial.println(url);
+    doc["octoUrl"] = octoWh;
+    doc["octoToken"] = octoTk;
+    Serial.print("Speichere Spoolman Data in Datei: ");
+    Serial.println(doc.as<String>());
     if (!saveJsonValue("/spoolman_url.json", doc)) {
         Serial.println("Fehler beim Speichern der Spoolman-URL.");
+        return false;
     }
     spoolmanUrl = url;
+    octoEnabled = octoOn;
+    octoUrl = octoWh;
+    octoToken = octoTk;
 
     return true;
 }
@@ -431,6 +503,13 @@ bool saveSpoolmanUrl(const String& url) {
 String loadSpoolmanUrl() {
     JsonDocument doc;
     if (loadJsonValue("/spoolman_url.json", doc) && doc["url"].is<String>()) {
+        octoEnabled = (doc["octoEnabled"].is<bool>()) ? doc["octoEnabled"].as<bool>() : false;
+        if (octoEnabled && doc["octoToken"].is<String>() && doc["octoUrl"].is<String>())
+        {
+            octoUrl = doc["octoUrl"].as<String>();
+            octoToken = doc["octoToken"].as<String>();
+        }
+
         return doc["url"].as<String>();
     }
     Serial.println("Keine gültige Spoolman-URL gefunden.");

src/api.h

@@ -9,15 +9,19 @@
 
 extern bool spoolman_connected;
 extern String spoolmanUrl;
+extern bool octoEnabled;
+extern String octoUrl;
+extern String octoToken;
 
 bool checkSpoolmanInstance(const String& url);
-bool saveSpoolmanUrl(const String& url);
+bool saveSpoolmanUrl(const String& url, bool octoOn, const String& octoWh, const String& octoTk);
 String loadSpoolmanUrl(); // Neue Funktion zum Laden der URL
 bool checkSpoolmanExtraFields(); // Neue Funktion zum Überprüfen der Extrafelder
 JsonDocument fetchSingleSpoolInfo(int spoolId); // API-Funktion für die Webseite
-void sendAmsData(AsyncWebSocketClient *client); // Neue Funktion zum Senden von AMS-Daten
 bool updateSpoolTagId(String uidString, const char* payload); // Neue Funktion zum Aktualisieren eines Spools
 uint8_t updateSpoolWeight(String spoolId, uint16_t weight); // Neue Funktion zum Aktualisieren des Gewichts
 bool initSpoolman(); // Neue Funktion zum Initialisieren von Spoolman
+bool updateSpoolBambuData(String payload); // Neue Funktion zum Aktualisieren der Bambu-Daten
+bool updateSpoolOcto(int spoolId); // Neue Funktion zum Aktualisieren der Octo-Daten
 
 #endif

src/bambu.cpp

@@ -23,6 +23,11 @@ const char* bambu_username = "bblp";
 const char* bambu_ip = nullptr;
 const char* bambu_accesscode = nullptr;
 const char* bambu_serialnr = nullptr;
+
+String g_bambu_ip = "";
+String g_bambu_accesscode = "";
+String g_bambu_serialnr = "";
+
 bool bambu_connected = false;
 bool autoSendToBambu = false;
 int autoSetToBambuSpoolId = 0;
@@ -32,7 +37,7 @@ int ams_count = 0;
 String amsJsonData;  // Speichert das fertige JSON für WebSocket-Clients
 AMSData ams_data[MAX_AMS];  // Definition des Arrays;
 
-bool saveBambuCredentials(const String& ip, const String& serialnr, const String& accesscode, bool autoSend) {
+bool saveBambuCredentials(const String& ip, const String& serialnr, const String& accesscode, bool autoSend, const String& autoSendTime) {
     if (BambuMqttTask) {
         vTaskDelete(BambuMqttTask);
     }
@@ -42,6 +47,7 @@ bool saveBambuCredentials(const String& ip, const String& serialnr, const String
     doc["bambu_accesscode"] = accesscode;
     doc["bambu_serialnr"] = serialnr;
     doc["autoSendToBambu"] = autoSend;
+    doc["autoSendTime"] = (autoSendTime != "") ? autoSendTime.toInt() : autoSetBambuAmsCounter;
 
     if (!saveJsonValue("/bambu_credentials.json", doc)) {
         Serial.println("Fehler beim Speichern der Bambu-Credentials.");
@@ -53,6 +59,7 @@ bool saveBambuCredentials(const String& ip, const String& serialnr, const String
     bambu_accesscode = accesscode.c_str();
     bambu_serialnr = serialnr.c_str();
     autoSendToBambu = autoSend;
+    autoSetBambuAmsCounter = autoSendTime.toInt();
 
     vTaskDelay(100 / portTICK_PERIOD_MS);
     if (!setupMqtt()) return false;
@@ -67,16 +74,22 @@ bool loadBambuCredentials() {
         String ip = doc["bambu_ip"].as<String>();
         String code = doc["bambu_accesscode"].as<String>();
         String serial = doc["bambu_serialnr"].as<String>();
-        autoSendToBambu = doc["autoSendToBambu"].as<bool>();
+
+        g_bambu_ip = ip;
+        g_bambu_accesscode = code;
+        g_bambu_serialnr = serial;
+
+        if (doc["autoSendToBambu"].is<bool>()) autoSendToBambu = doc["autoSendToBambu"].as<bool>();
+        if (doc["autoSendTime"].is<int>()) autoSetBambuAmsCounter = doc["autoSendTime"].as<int>();
 
         ip.trim();
         code.trim();
         serial.trim();
 
         // Dynamische Speicherallokation für die globalen Pointer
-        bambu_ip = strdup(ip.c_str());
+        bambu_ip = g_bambu_ip.c_str();
-        bambu_accesscode = strdup(code.c_str());
+        bambu_accesscode = g_bambu_accesscode.c_str();
-        bambu_serialnr = strdup(serial.c_str());
+        bambu_serialnr = g_bambu_serialnr.c_str();
 
         report_topic = "device/" + String(bambu_serialnr) + "/report";
         //request_topic = "device/" + String(bambu_serialnr) + "/request";
@@ -95,12 +108,38 @@ FilamentResult findFilamentIdx(String brand, String type) {
     // JSON-Dokument für die Filament-Daten erstellen
     JsonDocument doc;
     
+    // Laden der own_filaments.json
+    String ownFilament = "";
+    if (!loadJsonValue("/own_filaments.json", doc)) 
+    {
+        Serial.println("Fehler beim Laden der eigenen Filament-Daten");
+    }
+    else
+    {
+        // Durchsuche direkt nach dem Type als Schlüssel
+        if (doc[type].is<String>()) {
+            ownFilament = doc[type].as<String>();
+        }
+        doc.clear();
+    }
+    doc.clear();
+
     // Laden der bambu_filaments.json
-    if (!loadJsonValue("/bambu_filaments.json", doc)) {
+    if (!loadJsonValue("/bambu_filaments.json", doc)) 
+    {
         Serial.println("Fehler beim Laden der Filament-Daten");
         return {"GFL99", "PLA"}; // Fallback auf Generic PLA
     }
 
+    // Wenn eigener Typ
+    if (ownFilament != "")
+    {
+        if (doc[ownFilament].is<String>()) 
+        {
+            return {ownFilament, doc[ownFilament].as<String>()};
+        }
+    }
+
     // 1. Erst versuchen wir die exakte Brand + Type Kombination zu finden
     String searchKey;
     if (brand == "Bambu" || brand == "Bambulab") {
@@ -157,7 +196,7 @@ FilamentResult findFilamentIdx(String brand, String type) {
     return {"GFL99", "PLA"};
 }
 
-bool sendMqttMessage(String payload) {
+bool sendMqttMessage(const String& payload) {
     Serial.println("Sending MQTT message");
     Serial.println(payload);
     if (client.publish(report_topic.c_str(), payload.c_str())) 
@@ -275,12 +314,98 @@ void autoSetSpool(int spoolId, uint8_t trayId) {
         Serial.println(spoolInfo.as<String>());
 
         setBambuSpool(spoolInfo.as<String>());
+
+        oledShowMessage("Spool set");
     }
 
     // id wieder zurücksetzen damit abgeschlossen
     autoSetToBambuSpoolId = 0;
 }
 
+void updateAmsWsData(JsonDocument& doc, JsonArray& amsArray, int& ams_count, JsonObject& vtTray) {
+    // Fortfahren mit der bestehenden Verarbeitung, da Änderungen gefunden wurden
+    ams_count = amsArray.size();
+        
+    for (int i = 0; i < ams_count && i < 16; i++) {
+        JsonObject amsObj = amsArray[i];
+        JsonArray trayArray = amsObj["tray"].as<JsonArray>();
+
+        ams_data[i].ams_id = i; // Setze die AMS-ID
+        for (int j = 0; j < trayArray.size() && j < 4; j++) { // Annahme: Maximal 4 Trays pro AMS
+            JsonObject trayObj = trayArray[j];
+
+            ams_data[i].trays[j].id = trayObj["id"].as<uint8_t>();
+            ams_data[i].trays[j].tray_info_idx = trayObj["tray_info_idx"].as<String>();
+            ams_data[i].trays[j].tray_type = trayObj["tray_type"].as<String>();
+            ams_data[i].trays[j].tray_sub_brands = trayObj["tray_sub_brands"].as<String>();
+            ams_data[i].trays[j].tray_color = trayObj["tray_color"].as<String>();
+            ams_data[i].trays[j].nozzle_temp_min = trayObj["nozzle_temp_min"].as<int>();
+            ams_data[i].trays[j].nozzle_temp_max = trayObj["nozzle_temp_max"].as<int>();
+            if (trayObj["tray_type"].as<String>() == "") ams_data[i].trays[j].setting_id = "";
+            ams_data[i].trays[j].cali_idx = trayObj["cali_idx"].as<String>();
+        }
+    }
+    
+    // Setze ams_count auf die Anzahl der normalen AMS
+    ams_count = amsArray.size();
+
+    // Wenn externe Spule vorhanden, füge sie hinzu
+    if (doc["print"]["vt_tray"].is<JsonObject>()) {
+        //JsonObject vtTray = doc["print"]["vt_tray"];
+        int extIdx = ams_count;  // Index für externe Spule
+        ams_data[extIdx].ams_id = 255;  // Spezielle ID für externe Spule
+        ams_data[extIdx].trays[0].id = 254;  // Spezielle ID für externes Tray
+        ams_data[extIdx].trays[0].tray_info_idx = vtTray["tray_info_idx"].as<String>();
+        ams_data[extIdx].trays[0].tray_type = vtTray["tray_type"].as<String>();
+        ams_data[extIdx].trays[0].tray_sub_brands = vtTray["tray_sub_brands"].as<String>();
+        ams_data[extIdx].trays[0].tray_color = vtTray["tray_color"].as<String>();
+        ams_data[extIdx].trays[0].nozzle_temp_min = vtTray["nozzle_temp_min"].as<int>();
+        ams_data[extIdx].trays[0].nozzle_temp_max = vtTray["nozzle_temp_max"].as<int>();
+
+        if (doc["print"]["vt_tray"]["tray_type"].as<String>() != "")
+        {
+            //ams_data[extIdx].trays[0].setting_id = vtTray["setting_id"].as<String>();
+            ams_data[extIdx].trays[0].cali_idx = vtTray["cali_idx"].as<String>();
+        }
+        else
+        {
+            ams_data[extIdx].trays[0].setting_id = "";
+            ams_data[extIdx].trays[0].cali_idx = "";
+        }
+        ams_count++;  // Erhöhe ams_count für die externe Spule
+    }
+
+    // Erstelle JSON für WebSocket-Clients
+    JsonDocument wsDoc;
+    JsonArray wsArray = wsDoc.to<JsonArray>();
+
+    for (int i = 0; i < ams_count; i++) {
+        JsonObject amsObj = wsArray.add<JsonObject>();
+        amsObj["ams_id"] = ams_data[i].ams_id;
+
+        JsonArray trays = amsObj["tray"].to<JsonArray>();
+        int maxTrays = (ams_data[i].ams_id == 255) ? 1 : 4;
+        
+        for (int j = 0; j < maxTrays; j++) {
+            JsonObject trayObj = trays.add<JsonObject>();
+            trayObj["id"] = ams_data[i].trays[j].id;
+            trayObj["tray_info_idx"] = ams_data[i].trays[j].tray_info_idx;
+            trayObj["tray_type"] = ams_data[i].trays[j].tray_type;
+            trayObj["tray_sub_brands"] = ams_data[i].trays[j].tray_sub_brands;
+            trayObj["tray_color"] = ams_data[i].trays[j].tray_color;
+            trayObj["nozzle_temp_min"] = ams_data[i].trays[j].nozzle_temp_min;
+            trayObj["nozzle_temp_max"] = ams_data[i].trays[j].nozzle_temp_max;
+            trayObj["setting_id"] = ams_data[i].trays[j].setting_id;
+            trayObj["cali_idx"] = ams_data[i].trays[j].cali_idx;
+        }
+    }
+
+    serializeJson(wsArray, amsJsonData);
+    wsDoc.clear();
+    Serial.println("AMS data updated");
+    sendAmsData(nullptr);
+}
+
 // init
 void mqtt_callback(char* topic, byte* payload, unsigned int length) {
     String message;
@@ -292,6 +417,7 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
     // JSON-Dokument parsen
     JsonDocument doc;
     DeserializationError error = deserializeJson(doc, message);
+    message = "";
     if (error) 
     {
         Serial.print("Fehler beim Parsen des JSON: ");
@@ -299,16 +425,8 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
         return;
     }
 
-    // Wenn bambu auto set spool aktiv und eine spule erkannt und mqtt meldung das neue spule im ams
-    if (autoSendToBambu && autoSetToBambuSpoolId > 0 && 
-        doc["print"]["command"].as<String>() == "push_status" && doc["print"]["ams"]["tray_pre"].as<uint8_t>()
-        && !doc["print"]["ams"]["ams"].as<JsonArray>())
-    {
-        autoSetSpool(autoSetToBambuSpoolId, doc["print"]["ams"]["tray_pre"].as<uint8_t>());
-    }
-
     // Prüfen, ob "print->upgrade_state" und "print.ams.ams" existieren
-    if (doc["print"]["upgrade_state"].is<JsonObject>()) 
+    if (doc["print"]["upgrade_state"].is<JsonObject>() || (doc["print"]["command"].is<String>() && doc["print"]["command"] == "push_status")) 
     {
         // Prüfen ob AMS-Daten vorhanden sind
         if (!doc["print"]["ams"].is<JsonObject>() || !doc["print"]["ams"]["ams"].is<JsonArray>()) 
@@ -344,158 +462,81 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
             // Vergleiche die Trays
             for (int j = 0; j < trayArray.size() && j < 4 && !hasChanges; j++) {
                 JsonObject trayObj = trayArray[j];
+
+                if (trayObj["tray_type"].as<String>() == "") ams_data[storedIndex].trays[j].setting_id = "";
+                if (trayObj["setting_id"].isNull()) trayObj["setting_id"] = "";
                 if (trayObj["tray_info_idx"].as<String>() != ams_data[storedIndex].trays[j].tray_info_idx ||
                     trayObj["tray_type"].as<String>() != ams_data[storedIndex].trays[j].tray_type ||
                     trayObj["tray_color"].as<String>() != ams_data[storedIndex].trays[j].tray_color ||
+                    (trayObj["setting_id"].as<String>() != "" && trayObj["setting_id"].as<String>() != ams_data[storedIndex].trays[j].setting_id) ||
                     trayObj["cali_idx"].as<String>() != ams_data[storedIndex].trays[j].cali_idx) {
                     hasChanges = true;
+
+                    if (autoSendToBambu && autoSetToBambuSpoolId > 0 && hasChanges)
+                    {
+                        autoSetSpool(autoSetToBambuSpoolId, ams_data[storedIndex].trays[j].id);
+                    }
+
                     break;
                 }
             }
         }
 
         // Prüfe die externe Spule
-        if (!hasChanges && doc["print"]["vt_tray"].is<JsonObject>()) {
         JsonObject vtTray = doc["print"]["vt_tray"];
-            bool foundExternal = false;
+        if (doc["print"]["vt_tray"].is<JsonObject>()) {
-            
             for (int i = 0; i < ams_count; i++) {
                 if (ams_data[i].ams_id == 255) {
-                    foundExternal = true;
+                    if (vtTray["tray_type"].as<String>() == "") ams_data[i].trays[0].setting_id = "";
+                    if (vtTray["setting_id"].isNull()) vtTray["setting_id"] = "";
                     if (vtTray["tray_info_idx"].as<String>() != ams_data[i].trays[0].tray_info_idx ||
                         vtTray["tray_type"].as<String>() != ams_data[i].trays[0].tray_type ||
                         vtTray["tray_color"].as<String>() != ams_data[i].trays[0].tray_color ||
-                        vtTray["cali_idx"].as<String>() != ams_data[i].trays[0].cali_idx) {
+                        (vtTray["setting_id"].as<String>() != "" && vtTray["setting_id"].as<String>() != ams_data[i].trays[0].setting_id) ||
+                        (vtTray["tray_type"].as<String>() != "" && vtTray["cali_idx"].as<String>() != ams_data[i].trays[0].cali_idx)) {
                         hasChanges = true;
+
+                        if (autoSendToBambu && autoSetToBambuSpoolId > 0 && hasChanges)
+                        {
+                            autoSetSpool(autoSetToBambuSpoolId, 254);
+                        }
                     }
                     break;
                 }
             }
-            if (!foundExternal) hasChanges = true;
         }
 
         if (!hasChanges) return;
 
-        // Fortfahren mit der bestehenden Verarbeitung, da Änderungen gefunden wurden
+        updateAmsWsData(doc, amsArray, ams_count, vtTray);
-        ams_count = amsArray.size();
-        
-        for (int i = 0; i < ams_count && i < 16; i++) {
-            JsonObject amsObj = amsArray[i];
-            JsonArray trayArray = amsObj["tray"].as<JsonArray>();
-
-            ams_data[i].ams_id = i; // Setze die AMS-ID
-            for (int j = 0; j < trayArray.size() && j < 4; j++) { // Annahme: Maximal 4 Trays pro AMS
-                JsonObject trayObj = trayArray[j];
-
-                ams_data[i].trays[j].id = trayObj["id"].as<uint8_t>();
-                ams_data[i].trays[j].tray_info_idx = trayObj["tray_info_idx"].as<String>();
-                ams_data[i].trays[j].tray_type = trayObj["tray_type"].as<String>();
-                ams_data[i].trays[j].tray_sub_brands = trayObj["tray_sub_brands"].as<String>();
-                ams_data[i].trays[j].tray_color = trayObj["tray_color"].as<String>();
-                ams_data[i].trays[j].nozzle_temp_min = trayObj["nozzle_temp_min"].as<int>();
-                ams_data[i].trays[j].nozzle_temp_max = trayObj["nozzle_temp_max"].as<int>();
-                ams_data[i].trays[j].setting_id = trayObj["setting_id"].as<String>();
-                ams_data[i].trays[j].cali_idx = trayObj["cali_idx"].as<String>();
-            }
     }
     
-        // Setze ams_count auf die Anzahl der normalen AMS
-        ams_count = amsArray.size();
-
-        // Wenn externe Spule vorhanden, füge sie hinzu
-        if (doc["print"]["vt_tray"].is<JsonObject>()) {
-            JsonObject vtTray = doc["print"]["vt_tray"];
-            int extIdx = ams_count;  // Index für externe Spule
-            ams_data[extIdx].ams_id = 255;  // Spezielle ID für externe Spule
-            ams_data[extIdx].trays[0].id = 254;  // Spezielle ID für externes Tray
-            ams_data[extIdx].trays[0].tray_info_idx = vtTray["tray_info_idx"].as<String>();
-            ams_data[extIdx].trays[0].tray_type = vtTray["tray_type"].as<String>();
-            ams_data[extIdx].trays[0].tray_sub_brands = vtTray["tray_sub_brands"].as<String>();
-            ams_data[extIdx].trays[0].tray_color = vtTray["tray_color"].as<String>();
-            ams_data[extIdx].trays[0].nozzle_temp_min = vtTray["nozzle_temp_min"].as<int>();
-            ams_data[extIdx].trays[0].nozzle_temp_max = vtTray["nozzle_temp_max"].as<int>();
-
-            if (doc["print"]["vt_tray"]["tray_type"].as<String>() != "")
-            {
-                ams_data[extIdx].trays[0].setting_id = vtTray["setting_id"].as<String>();
-                ams_data[extIdx].trays[0].cali_idx = vtTray["cali_idx"].as<String>();
-            }
-            ams_count++;  // Erhöhe ams_count für die externe Spule
-        }
-
-        // Sende die aktualisierten AMS-Daten
-        //sendAmsData(nullptr);
-
-        // Erstelle JSON für WebSocket-Clients
-        JsonDocument wsDoc;
-        JsonArray wsArray = wsDoc.to<JsonArray>();
-
-        for (int i = 0; i < ams_count; i++) {
-            JsonObject amsObj = wsArray.add<JsonObject>();
-            amsObj["ams_id"] = ams_data[i].ams_id;
-
-            JsonArray trays = amsObj["tray"].to<JsonArray>();
-            int maxTrays = (ams_data[i].ams_id == 255) ? 1 : 4;
-            
-            for (int j = 0; j < maxTrays; j++) {
-                JsonObject trayObj = trays.add<JsonObject>();
-                trayObj["id"] = ams_data[i].trays[j].id;
-                trayObj["tray_info_idx"] = ams_data[i].trays[j].tray_info_idx;
-                trayObj["tray_type"] = ams_data[i].trays[j].tray_type;
-                trayObj["tray_sub_brands"] = ams_data[i].trays[j].tray_sub_brands;
-                trayObj["tray_color"] = ams_data[i].trays[j].tray_color;
-                trayObj["nozzle_temp_min"] = ams_data[i].trays[j].nozzle_temp_min;
-                trayObj["nozzle_temp_max"] = ams_data[i].trays[j].nozzle_temp_max;
-                trayObj["setting_id"] = ams_data[i].trays[j].setting_id;
-                trayObj["cali_idx"] = ams_data[i].trays[j].cali_idx;
-            }
-        }
-
-        serializeJson(wsArray, amsJsonData);
-        sendAmsData(nullptr);
-    }
     // Neue Bedingung für ams_filament_setting
-    else if (doc["print"]["command"] == "ams_filament_setting") {
+    if (doc["print"]["command"] == "ams_filament_setting") {
         int amsId = doc["print"]["ams_id"].as<int>();
         int trayId = doc["print"]["tray_id"].as<int>();
-        String settingId = doc["print"]["setting_id"].as<String>();
+        String settingId = (doc["print"]["setting_id"].is<String>()) ? doc["print"]["setting_id"].as<String>() : "";
 
         // Finde das entsprechende AMS und Tray
         for (int i = 0; i < ams_count; i++) {
             if (ams_data[i].ams_id == amsId) {
-                // Update setting_id im entsprechenden Tray
+                if (trayId == 254)
-                ams_data[i].trays[trayId].setting_id = settingId;
+                {
-                
+                    // Suche AMS mit ID 255 (externe Spule)
-                // Erstelle neues JSON für WebSocket-Clients
-                JsonDocument wsDoc;
-                JsonArray wsArray = wsDoc.to<JsonArray>();
-
                     for (int j = 0; j < ams_count; j++) {
-                    JsonObject amsObj = wsArray.add<JsonObject>();
+                        if (ams_data[j].ams_id == 255) {
-                    amsObj["ams_id"] = ams_data[j].ams_id;
+                            ams_data[j].trays[0].setting_id = settingId;
-
+                            break;
-                    JsonArray trays = amsObj["tray"].to<JsonArray>();
-                    int maxTrays = (ams_data[j].ams_id == 255) ? 1 : 4;
-                    
-                    for (int k = 0; k < maxTrays; k++) {
-                        JsonObject trayObj = trays.add<JsonObject>();
-                        trayObj["id"] = ams_data[j].trays[k].id;
-                        trayObj["tray_info_idx"] = ams_data[j].trays[k].tray_info_idx;
-                        trayObj["tray_type"] = ams_data[j].trays[k].tray_type;
-                        trayObj["tray_sub_brands"] = ams_data[j].trays[k].tray_sub_brands;
-                        trayObj["tray_color"] = ams_data[j].trays[k].tray_color;
-                        trayObj["nozzle_temp_min"] = ams_data[j].trays[k].nozzle_temp_min;
-                        trayObj["nozzle_temp_max"] = ams_data[j].trays[k].nozzle_temp_max;
-                        trayObj["setting_id"] = ams_data[j].trays[k].setting_id;
-                        trayObj["cali_idx"] = ams_data[j].trays[k].cali_idx;
                         }
                     }
-
+                }
-                // Aktualisiere das globale amsJsonData
+                else
-                amsJsonData = "";
+                {
-                serializeJson(wsArray, amsJsonData);
+                    ams_data[i].trays[trayId].setting_id = settingId;
+                }
                
                 // Sende an WebSocket Clients
+                Serial.println("Filament setting updated");
                 sendAmsData(nullptr);
                 break;
             }
@@ -505,15 +546,16 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
 
 void reconnect() {
     // Loop until we're reconnected
+    uint8_t retries = 0;
     while (!client.connected()) {
-        Serial.println("Attempting MQTT connection...");
+        Serial.println("Attempting MQTT re/connection...");
         bambu_connected = false;
         oledShowTopRow();
 
         // Attempt to connect
         if (client.connect(bambu_serialnr, bambu_username, bambu_accesscode)) {
-            Serial.println("... re-connected");
+            Serial.println("MQTT re/connected");
-            // ... and resubscribe
+
             client.subscribe(report_topic.c_str());
             bambu_connected = true;
             oledShowTopRow();
@@ -523,14 +565,23 @@ void reconnect() {
             Serial.println(" try again in 5 seconds");
             bambu_connected = false;
             oledShowTopRow();
-            // Wait 5 seconds before retrying
+            
             yield();
             vTaskDelay(5000 / portTICK_PERIOD_MS);
+            if (retries > 5) {
+                Serial.println("Disable Bambu MQTT Task after 5 retries");
+                //vTaskSuspend(BambuMqttTask);
+                vTaskDelete(BambuMqttTask);
+                break;
+            }
+
+            retries++;
         }
     }
 }
 
 void mqtt_loop(void * parameter) {
+    Serial.println("Bambu MQTT Task gestartet");
     for(;;) {
         if (pauseBambuMqttTask) {
             vTaskDelay(10000);
@@ -544,6 +595,7 @@ void mqtt_loop(void * parameter) {
         }
         client.loop();
         yield();
+        esp_task_wdt_reset();
         vTaskDelay(100);
     }
 }
@@ -551,7 +603,6 @@ void mqtt_loop(void * parameter) {
 bool setupMqtt() {
     // Wenn Bambu Daten vorhanden
     bool success = loadBambuCredentials();
-    vTaskDelay(100 / portTICK_PERIOD_MS);
 
     if (!success) {
         Serial.println("Failed to load Bambu credentials");
@@ -584,7 +635,7 @@ bool setupMqtt() {
             xTaskCreatePinnedToCore(
                 mqtt_loop, /* Function to implement the task */
                 "BambuMqtt", /* Name of the task */
-                10000,  /* Stack size in words */
+                8192,  /* Stack size in words */
                 NULL,  /* Task input parameter */
                 mqttTaskPrio,  /* Priority of the task */
                 &BambuMqttTask,  /* Task handle. */
@@ -615,6 +666,7 @@ bool setupMqtt() {
 void bambu_restart() {
     if (BambuMqttTask) {
         vTaskDelete(BambuMqttTask);
+        delay(10);
     }
     setupMqtt();
 }

src/bambu.h

@@ -32,7 +32,7 @@ extern bool autoSendToBambu;
 extern int autoSetToBambuSpoolId;
 
 bool loadBambuCredentials();
-bool saveBambuCredentials(const String& bambu_ip, const String& bambu_serialnr, const String& bambu_accesscode, const bool autoSend);
+bool saveBambuCredentials(const String& bambu_ip, const String& bambu_serialnr, const String& bambu_accesscode, const bool autoSend, const String& autoSendTime);
 bool setupMqtt();
 void mqtt_loop(void * parameter);
 bool setBambuSpool(String payload);

src/commonFS.cpp

@@ -1,8 +1,8 @@
 #include "commonFS.h"
-#include <SPIFFS.h>
+#include <LittleFS.h>
 
 bool saveJsonValue(const char* filename, const JsonDocument& doc) {
-    File file = SPIFFS.open(filename, "w");
+    File file = LittleFS.open(filename, "w");
     if (!file) {
         Serial.print("Fehler beim Öffnen der Datei zum Schreiben: ");
         Serial.println(filename);
@@ -20,7 +20,7 @@ bool saveJsonValue(const char* filename, const JsonDocument& doc) {
 }
 
 bool loadJsonValue(const char* filename, JsonDocument& doc) {
-    File file = SPIFFS.open(filename, "r");
+    File file = LittleFS.open(filename, "r");
     if (!file) {
         Serial.print("Fehler beim Öffnen der Datei zum Lesen: ");
         Serial.println(filename);
@@ -36,12 +36,12 @@ bool loadJsonValue(const char* filename, JsonDocument& doc) {
     return true;
 }
 
-void initializeSPIFFS() {
+void initializeFileSystem() {
-    if (!SPIFFS.begin(true, "/spiffs", 10, "spiffs")) {
+    if (!LittleFS.begin(true)) {
-        Serial.println("SPIFFS Mount Failed");
+        Serial.println("LittleFS Mount Failed");
         return;
     }
-    Serial.printf("SPIFFS Total: %u bytes\n", SPIFFS.totalBytes());
+    Serial.printf("LittleFS Total: %u bytes\n", LittleFS.totalBytes());
-    Serial.printf("SPIFFS Used: %u bytes\n", SPIFFS.usedBytes());
+    Serial.printf("LittleFS Used: %u bytes\n", LittleFS.usedBytes());
-    Serial.printf("SPIFFS Free: %u bytes\n", SPIFFS.totalBytes() - SPIFFS.usedBytes());
+    Serial.printf("LittleFS Free: %u bytes\n", LittleFS.totalBytes() - LittleFS.usedBytes());
 }

src/commonFS.h

@@ -2,11 +2,11 @@
 #define COMMONFS_H
 
 #include <Arduino.h>
-#include <SPIFFS.h>
 #include <ArduinoJson.h>
+#include <LittleFS.h>
 
 bool saveJsonValue(const char* filename, const JsonDocument& doc);
 bool loadJsonValue(const char* filename, JsonDocument& doc);
-void initializeSPIFFS();
+void initializeFileSystem();
 
 #endif

src/display.cpp

@@ -20,9 +20,9 @@ void setupDisplay() {
     // the library initializes this with an Adafruit splash screen.
     display.setTextColor(WHITE);
     display.display();
-    delay(1000); // Pause for 2 seconds
     oledShowTopRow();
-    delay(2000);
+    oledShowMessage("FilaMan v" + String(VERSION));
+    vTaskDelay(2000 / portTICK_PERIOD_MS);
 }
 
 void oledclearline() {
@@ -139,8 +139,9 @@ void oledShowMultilineMessage(String message, uint8_t size) {
     int totalHeight = lines.size() * lineHeight;
     int startY = OLED_DATA_START + ((OLED_DATA_END - OLED_DATA_START - totalHeight) / 2);
     
+    uint8_t lineDistance = (lines.size() == 2) ? 5 : 0;
     for (size_t i = 0; i < lines.size(); i++) {
-        display.setCursor(oled_center_h(lines[i]), startY + (i * lineHeight));
+        display.setCursor(oled_center_h(lines[i]), startY + (i * lineHeight) + (i == 1 ? lineDistance : 0));
         display.print(lines[i]);
     }
     

src/main.cpp

@@ -1,6 +1,4 @@
 #include <Arduino.h>
-#include <DNSServer.h>
-#include <ESPmDNS.h>
 #include <Wire.h>
 #include <WiFi.h>
 
@@ -26,7 +24,7 @@ void setup() {
   Serial.printf("%08X\n", (uint32_t)chipid); //print Low 4bytes.
 
   // Initialize SPIFFS
-  initializeSPIFFS();
+  initializeFileSystem();
 
   // Start Display
   setupDisplay();
@@ -35,7 +33,6 @@ void setup() {
   initWiFi();
 
   // Webserver
-  Serial.println("Starte Webserver");
   setupWebserver(server);
 
   // Spoolman API
@@ -43,19 +40,9 @@ void setup() {
   initSpoolman();
 
   // Bambu MQTT
-  // bambu.cpp
   setupMqtt();
 
-  // mDNS
+  // NFC Reader
-  Serial.println("Starte MDNS");
-  if (!MDNS.begin("filaman")) {   // Set the hostname to "esp32.local"
-    Serial.println("Error setting up MDNS responder!");
-    while(1) {
-      delay(1000);
-    }
-  }
-  Serial.println("mDNS responder started");
-  
   startNfc();
 
   uint8_t scaleCalibrated = start_scale();
@@ -87,6 +74,21 @@ void setup() {
 }
 
 
+/**
+ * Safe interval check that handles millis() overflow
+ * @param currentTime Current millis() value
+ * @param lastTime Last recorded time
+ * @param interval Desired interval in milliseconds
+ * @return True if interval has elapsed
+ */
+bool intervalElapsed(unsigned long currentTime, unsigned long &lastTime, unsigned long interval) {
+  if (currentTime - lastTime >= interval || currentTime < lastTime) {
+    lastTime = currentTime;
+    return true;
+  }
+  return false;
+}
+
 unsigned long lastWeightReadTime = 0;
 const unsigned long weightReadInterval = 1000; // 1 second
 
@@ -94,26 +96,26 @@ unsigned long lastAutoSetBambuAmsTime = 0;
 const unsigned long autoSetBambuAmsInterval = 1000; // 1 second
 uint8_t autoAmsCounter = 0;
 
-unsigned long lastAmsSendTime = 0;
-const unsigned long amsSendInterval = 60000; // 1 minute
-
 uint8_t weightSend = 0;
 int16_t lastWeight = 0;
-uint8_t wifiErrorCounter = 0;
+
+unsigned long lastWifiCheckTime = 0;
+const unsigned long wifiCheckInterval = 60000; // Überprüfe alle 60 Sekunden (60000 ms)
 
 // ##### PROGRAM START #####
 void loop() {
   unsigned long currentMillis = millis();
 
-  // Send AMS Data min every Minute
+  // Überprüfe regelmäßig die WLAN-Verbindung
-  if (currentMillis - lastAmsSendTime >= amsSendInterval) 
+  if (intervalElapsed(currentMillis, lastWifiCheckTime, wifiCheckInterval)) {
-  {
+    checkWiFiConnection();
-    lastAmsSendTime = currentMillis;
-    sendAmsData(nullptr);
   }
 
   // Wenn Bambu auto set Spool aktiv
-  if (autoSendToBambu && autoSetToBambuSpoolId > 0 && currentMillis - lastAutoSetBambuAmsTime >= autoSetBambuAmsInterval) 
+  if (autoSendToBambu && autoSetToBambuSpoolId > 0) {
+    if (intervalElapsed(currentMillis, lastAutoSetBambuAmsTime, autoSetBambuAmsInterval)) 
+    {
+      if (hasReadRfidTag == 0)
       {
         lastAutoSetBambuAmsTime = currentMillis;
         oledShowMessage("Auto Set         " + String(autoSetBambuAmsCounter - autoAmsCounter) + "s");
@@ -126,7 +128,12 @@ void loop() {
           oledShowWeight(weight);
         }
       }
-  
+      else
+      {
+        autoAmsCounter = 0;
+      }
+    }
+  }
 
   // Wenn Waage nicht Kalibriert
   if (scaleCalibrated == 3) 
@@ -190,6 +197,11 @@ void loop() {
       vTaskDelay(2000 / portTICK_PERIOD_MS);
       weightSend = 1;
       autoSetToBambuSpoolId = spoolId.toInt();
+
+      if (octoEnabled) 
+      {
+        updateSpoolOcto(autoSetToBambuSpoolId);
+      }
     }
     else
     {

src/nfc.cpp

@@ -44,8 +44,6 @@ void payloadToJson(uint8_t *data) {
       DeserializationError error = deserializeJson(doc, jsonString);
   
       if (!error) {
-        const char* version = doc["version"];
-        const char* protocol = doc["protocol"];
         const char* color_hex = doc["color_hex"];
         const char* type = doc["type"];
         int min_temp = doc["min_temp"];
@@ -55,8 +53,6 @@ void payloadToJson(uint8_t *data) {
         Serial.println();
         Serial.println("-----------------");
         Serial.println("JSON-Parsed Data:");
-        Serial.println(version);
-        Serial.println(protocol);
         Serial.println(color_hex);
         Serial.println(type);
         Serial.println(min_temp);
@@ -93,8 +89,16 @@ bool formatNdefTag() {
     return success;
   }
 
+uint16_t readTagSize()
+{
+  uint8_t buffer[4];
+  memset(buffer, 0, 4);
+  nfc.ntag2xx_ReadPage(3, buffer);
+  return buffer[2]*8;
+}
+
 uint8_t ntag2xx_WriteNDEF(const char *payload) {
-  uint8_t tagSize = 240; // 144 bytes is maximum for NTAG213
+  uint16_t tagSize = readTagSize();
   Serial.print("Tag Size: ");Serial.println(tagSize);
 
   uint8_t pageBuffer[4] = {0, 0, 0, 0};
@@ -136,6 +140,8 @@ uint8_t ntag2xx_WriteNDEF(const char *payload) {
   if (combinedData == NULL) 
   {
     Serial.println("Fehler: Nicht genug Speicher vorhanden.");
+    oledShowMessage("Tag too small");
+    vTaskDelay(2000 / portTICK_PERIOD_MS);
     return 0;
   }
 
@@ -238,10 +244,12 @@ void writeJsonToTag(void *parameter) {
 
   hasReadRfidTag = 3;
   vTaskSuspend(RfidReaderTask);
-  vTaskDelay(500 / portTICK_PERIOD_MS);
+  vTaskDelay(50 / portTICK_PERIOD_MS);
+
   //pauseBambuMqttTask = true;
   // aktualisieren der Website wenn sich der Status ändert
   sendNfcData(nullptr);
+  vTaskDelay(100 / portTICK_PERIOD_MS);
   oledShowMessage("Waiting for NFC-Tag");
   
   // Wait 10sec for tag
@@ -331,7 +339,7 @@ void startWriteJsonToTag(const char* payload) {
     xTaskCreate(
         writeJsonToTag,        // Task-Funktion
         "WriteJsonToTagTask",       // Task-Name
-        4096,                        // Stackgröße in Bytes
+        5115,                        // Stackgröße in Bytes
         (void*)payloadCopy,         // Parameter
         rfidWriteTaskPrio,           // Priorität
         NULL                         // Task-Handle (nicht benötigt)
@@ -367,21 +375,19 @@ void scanRfidTask(void * parameter) {
 
         if (uidLength == 7)
         {
-          uint8_t data[256];
+          uint16_t tagSize = readTagSize();
+          if(tagSize > 0)
+          {
+            // Create a buffer depending on the size of the tag
+            uint8_t* data = (uint8_t*)malloc(tagSize);
+            memset(data, 0, tagSize);
 
             // We probably have an NTAG2xx card (though it could be Ultralight as well)
             Serial.println("Seems to be an NTAG2xx tag (7 byte UID)");
             
-          for (uint8_t i = 0; i < 45; i++) {
+            uint8_t numPages = readTagSize()/4;
-            /*
+            for (uint8_t i = 4; i < 4+numPages; i++) {
-            if (i < uidLength) {
+              if (!nfc.ntag2xx_ReadPage(i, data+(i-4) * 4))
-              uidString += String(uid[i], HEX);
-              if (i < uidLength - 1) {
-                  uidString += ":"; // Optional: Trennzeichen hinzufügen
-              }
-            }
-            */
-            if (!nfc.mifareclassic_ReadDataBlock(i, data + (i - 4) * 4)) 
               {
                 break; // Stop if reading fails
               }
@@ -407,6 +413,13 @@ void scanRfidTask(void * parameter) {
               hasReadRfidTag = 1;
             }
 
+            free(data);
+          }
+          else
+          {
+            oledShowMessage("NFC-Tag read error");
+            hasReadRfidTag = 2;
+          }
         }
         else
         {
@@ -456,7 +469,7 @@ void startNfc() {
     BaseType_t result = xTaskCreatePinnedToCore(
       scanRfidTask, /* Function to implement the task */
       "RfidReader", /* Name of the task */
-      10000,  /* Stack size in words */
+      5115,  /* Stack size in words */
       NULL,  /* Task input parameter */
       rfidTaskPrio,  /* Priority of the task */
       &RfidReaderTask,  /* Task handle. */

src/ota.cpp

@@ -0,0 +1,243 @@
+#include <Arduino.h>
+#include <website.h>
+#include <commonFS.h>
+
+// Globale Variablen für Config Backups hinzufügen
+String bambuCredentialsBackup;
+String spoolmanUrlBackup;
+
+// Globale Variable für den Update-Typ
+static int currentUpdateCommand = 0;
+
+// Globale Update-Variablen
+static size_t updateTotalSize = 0;
+static size_t updateWritten = 0;
+static bool isSpiffsUpdate = false;
+
+/**
+ * Compares two version strings and determines if version1 is less than version2
+ * 
+ * @param version1 First version string (format: x.y.z)
+ * @param version2 Second version string (format: x.y.z)
+ * @return true if version1 is less than version2
+ */
+bool isVersionLessThan(const String& version1, const String& version2) {
+    int major1 = 0, minor1 = 0, patch1 = 0;
+    int major2 = 0, minor2 = 0, patch2 = 0;
+    
+    // Parse version1
+    sscanf(version1.c_str(), "%d.%d.%d", &major1, &minor1, &patch1);
+    
+    // Parse version2
+    sscanf(version2.c_str(), "%d.%d.%d", &major2, &minor2, &patch2);
+    
+    // Compare major version
+    if (major1 < major2) return true;
+    if (major1 > major2) return false;
+    
+    // Major versions equal, compare minor
+    if (minor1 < minor2) return true;
+    if (minor1 > minor2) return false;
+    
+    // Minor versions equal, compare patch
+    return patch1 < patch2;
+}
+
+void backupJsonConfigs() {
+    // Bambu Credentials backup
+    if (LittleFS.exists("/bambu_credentials.json")) {
+        File file = LittleFS.open("/bambu_credentials.json", "r");
+        if (file) {
+            bambuCredentialsBackup = file.readString();
+            file.close();
+            Serial.println("Bambu credentials backed up");
+        }
+    }
+
+    // Spoolman URL backup
+    if (LittleFS.exists("/spoolman_url.json")) {
+        File file = LittleFS.open("/spoolman_url.json", "r");
+        if (file) {
+            spoolmanUrlBackup = file.readString();
+            file.close();
+            Serial.println("Spoolman URL backed up");
+        }
+    }
+}
+
+void restoreJsonConfigs() {
+    // Restore Bambu credentials
+    if (bambuCredentialsBackup.length() > 0) {
+        File file = LittleFS.open("/bambu_credentials.json", "w");
+        if (file) {
+            file.print(bambuCredentialsBackup);
+            file.close();
+            Serial.println("Bambu credentials restored");
+        }
+        bambuCredentialsBackup = ""; // Clear backup
+    }
+
+    // Restore Spoolman URL
+    if (spoolmanUrlBackup.length() > 0) {
+        File file = LittleFS.open("/spoolman_url.json", "w");
+        if (file) {
+            file.print(spoolmanUrlBackup);
+            file.close();
+            Serial.println("Spoolman URL restored");
+        }
+        spoolmanUrlBackup = ""; // Clear backup
+    }
+}
+
+void espRestart() {
+    yield();
+    vTaskDelay(5000 / portTICK_PERIOD_MS);
+
+    ESP.restart();
+}
+
+
+void sendUpdateProgress(int progress, const char* status = nullptr, const char* message = nullptr) {
+    static int lastSentProgress = -1;
+    
+    // Verhindere zu häufige Updates
+    if (progress == lastSentProgress && !status && !message) {
+        return;
+    }
+    
+    String progressMsg = "{\"type\":\"updateProgress\",\"progress\":" + String(progress);
+    if (status) {
+        progressMsg += ",\"status\":\"" + String(status) + "\"";
+    }
+    if (message) {
+        progressMsg += ",\"message\":\"" + String(message) + "\"";
+    }
+    progressMsg += "}";
+    
+    if (progress >= 100) {
+        // Sende die Nachricht nur einmal für den Abschluss
+        ws.textAll("{\"type\":\"updateProgress\",\"progress\":100,\"status\":\"success\",\"message\":\"Update successful! Restarting device...\"}");
+        delay(50);
+    }
+
+    // Sende die Nachricht mehrmals mit Verzögerung für wichtige Updates
+    if (status || abs(progress - lastSentProgress) >= 10 || progress == 100) {
+        for (int i = 0; i < 2; i++) {
+            ws.textAll(progressMsg);
+            delay(100);  // Längerer Delay zwischen Nachrichten
+        }
+    } else {
+        ws.textAll(progressMsg);
+        delay(50);
+    }
+    
+    lastSentProgress = progress;
+}
+
+void handleUpdate(AsyncWebServer &server) {
+    AsyncCallbackWebHandler* updateHandler = new AsyncCallbackWebHandler();
+    updateHandler->setUri("/update");
+    updateHandler->setMethod(HTTP_POST);
+    
+    // Check if current version is less than defined TOOLVERSION before proceeding with update
+    if (isVersionLessThan(VERSION, TOOLDVERSION)) {
+        updateHandler->onRequest([](AsyncWebServerRequest *request) {
+            request->send(400, "application/json", 
+                "{\"success\":false,\"message\":\"Your current version is too old. Please perform a full upgrade.\"}");
+        });
+        server.addHandler(updateHandler);
+        return;
+    }
+
+    updateHandler->onUpload([](AsyncWebServerRequest *request, String filename,
+                             size_t index, uint8_t *data, size_t len, bool final) {
+        if (!index) {
+            updateTotalSize = request->contentLength();
+            updateWritten = 0;
+            isSpiffsUpdate = (filename.indexOf("website") > -1);
+            
+            if (isSpiffsUpdate) {
+                // Backup vor dem Update
+                sendUpdateProgress(0, "backup", "Backing up configurations...");
+                delay(200);
+                backupJsonConfigs();
+                delay(200);
+                
+                const esp_partition_t *partition = esp_partition_find_first(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_DATA_SPIFFS, NULL);
+                if (!partition || !Update.begin(partition->size, U_SPIFFS)) {
+                    request->send(400, "application/json", "{\"success\":false,\"message\":\"Update initialization failed\"}");
+                    return;
+                }
+                sendUpdateProgress(5, "starting", "Starting SPIFFS update...");
+                delay(200);
+            } else {
+                if (!Update.begin(updateTotalSize)) {
+                    request->send(400, "application/json", "{\"success\":false,\"message\":\"Update initialization failed\"}");
+                    return;
+                }
+                sendUpdateProgress(0, "starting", "Starting firmware update...");
+                delay(200);
+            }
+        }
+
+        if (len) {
+            if (Update.write(data, len) != len) {
+                request->send(400, "application/json", "{\"success\":false,\"message\":\"Write failed\"}");
+                return;
+            }
+            
+            updateWritten += len;
+            int currentProgress;
+            
+            // Berechne den Fortschritt basierend auf dem Update-Typ
+            if (isSpiffsUpdate) {
+                // SPIFFS: 5-75% für Upload
+                currentProgress = 6 + (updateWritten * 100) / updateTotalSize;
+            } else {
+                // Firmware: 0-100% für Upload
+                currentProgress = 1 + (updateWritten * 100) / updateTotalSize;
+            }
+            
+            static int lastProgress = -1;
+            if (currentProgress != lastProgress && (currentProgress % 10 == 0 || final)) {
+                sendUpdateProgress(currentProgress, "uploading");
+                oledShowMessage("Update: " + String(currentProgress) + "%");
+                delay(50);
+                lastProgress = currentProgress;
+            }
+        }
+
+        if (final) {
+            if (Update.end(true)) {
+                if (isSpiffsUpdate) {
+                    restoreJsonConfigs();
+                }
+            } else {
+                request->send(400, "application/json", "{\"success\":false,\"message\":\"Update finalization failed\"}");
+            }
+        }
+    });
+
+    updateHandler->onRequest([](AsyncWebServerRequest *request) {
+        if (Update.hasError()) {
+            request->send(400, "application/json", "{\"success\":false,\"message\":\"Update failed\"}");
+            return;
+        }
+
+        // Erste 100% Nachricht
+        ws.textAll("{\"type\":\"updateProgress\",\"progress\":100,\"status\":\"success\",\"message\":\"Update successful! Restarting device...\"}");
+        vTaskDelay(2000 / portTICK_PERIOD_MS);
+        
+        AsyncWebServerResponse *response = request->beginResponse(200, "application/json", 
+            "{\"success\":true,\"message\":\"Update successful! Restarting device...\"}");
+        response->addHeader("Connection", "close");
+        request->send(response);
+        
+        // Zweite 100% Nachricht zur Sicherheit
+        ws.textAll("{\"type\":\"updateProgress\",\"progress\":100,\"status\":\"success\",\"message\":\"Update successful! Restarting device...\"}");
+        
+        espRestart();
+    });
+
+    server.addHandler(updateHandler);
+}

src/ota.h

@@ -0,0 +1,9 @@
+#ifndef OTA_H
+#define OTA_H
+
+#include <ArduinoOTA.h>
+#include <ESPAsyncWebServer.h>
+
+void handleUpdate(AsyncWebServer &server);
+
+#endif

src/scale.cpp

@@ -47,7 +47,7 @@ void scale_loop(void * parameter) {
       weight = round(scale.get_units());
     }
     
-    vTaskDelay(pdMS_TO_TICKS(100)); // Verzögerung, um die CPU nicht zu überlasten
+    vTaskDelay(pdMS_TO_TICKS(100));
   }
 }
 
@@ -90,7 +90,7 @@ uint8_t start_scale() {
   BaseType_t result = xTaskCreatePinnedToCore(
     scale_loop, /* Function to implement the task */
     "ScaleLoop", /* Name of the task */
-    10000,  /* Stack size in words */
+    2048,  /* Stack size in words */
     NULL,  /* Task input parameter */
     scaleTaskPrio,  /* Priority of the task */
     &ScaleTask,  /* Task handle. */
@@ -110,6 +110,7 @@ uint8_t calibrate_scale() {
 
   //vTaskSuspend(RfidReaderTask);
   vTaskDelete(RfidReaderTask);
+  vTaskDelete(ScaleTask);
   pauseBambuMqttTask = true;
   pauseMainTask = 1;
 
@@ -177,8 +178,6 @@ uint8_t calibrate_scale() {
         vTaskDelay(pdMS_TO_TICKS(1));
         esp_task_wdt_reset();
       }
-
-      //ESP.restart();
     }
     else
     {
@@ -212,8 +211,7 @@ uint8_t calibrate_scale() {
 
   oledShowMessage("Scale Ready");
   
-  
+  Serial.println("restart Scale Task");
-  Serial.println("starte Scale Task");
   start_scale();
 
   pauseBambuMqttTask = false;

src/website.cpp

@@ -9,6 +9,7 @@
 #include "esp_task_wdt.h"
 #include <Update.h>
 #include "display.h"
+#include "ota.h"
 
 #ifndef VERSION
   #define VERSION "1.1.0"
@@ -23,48 +24,6 @@ AsyncWebSocket ws("/ws");
 uint8_t lastSuccess = 0;
 uint8_t lastHasReadRfidTag = 0;
 
-// Globale Variablen für Config Backups hinzufügen
-String bambuCredentialsBackup;
-String spoolmanUrlBackup;
-
-// Globale Variable für den Update-Typ
-static int currentUpdateCommand = 0;
-
-// Globale Update-Variablen
-static size_t updateTotalSize = 0;
-static size_t updateWritten = 0;
-static bool isSpiffsUpdate = false;
-
-void sendUpdateProgress(int progress, const char* status = nullptr, const char* message = nullptr) {
-    static int lastSentProgress = -1;
-    
-    // Verhindere zu häufige Updates
-    if (progress == lastSentProgress && !status && !message) {
-        return;
-    }
-    
-    String progressMsg = "{\"type\":\"updateProgress\",\"progress\":" + String(progress);
-    if (status) {
-        progressMsg += ",\"status\":\"" + String(status) + "\"";
-    }
-    if (message) {
-        progressMsg += ",\"message\":\"" + String(message) + "\"";
-    }
-    progressMsg += "}";
-    
-    // Sende die Nachricht mehrmals mit Verzögerung für wichtige Updates
-    if (status || abs(progress - lastSentProgress) >= 10 || progress == 100) {
-        for (int i = 0; i < 2; i++) {
-            ws.textAll(progressMsg);
-            delay(100);  // Längerer Delay zwischen Nachrichten
-        }
-    } else {
-        ws.textAll(progressMsg);
-        delay(50);
-    }
-    
-    lastSentProgress = progress;
-}
 
 void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventType type, void *arg, uint8_t *data, size_t len) {
     if (type == WS_EVT_CONNECT) {
@@ -136,6 +95,15 @@ void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventTyp
             setBambuSpool(doc["payload"]);
         }
 
+        else if (doc["type"] == "setSpoolmanSettings") {
+            Serial.println(doc["payload"].as<String>());
+            if (updateSpoolBambuData(doc["payload"].as<String>())) {
+                ws.textAll("{\"type\":\"setSpoolmanSettings\",\"payload\":\"success\"}");
+            } else {
+                ws.textAll("{\"type\":\"setSpoolmanSettings\",\"payload\":\"error\"}");
+            }
+        }
+
         else {
             Serial.println("Unbekannter WebSocket-Typ: " + doc["type"].as<String>());
         }
@@ -145,12 +113,12 @@ void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventTyp
 // Funktion zum Laden und Ersetzen des Headers in einer HTML-Datei
 String loadHtmlWithHeader(const char* filename) {
     Serial.println("Lade HTML-Datei: " + String(filename));
-    if (!SPIFFS.exists(filename)) {
+    if (!LittleFS.exists(filename)) {
         Serial.println("Fehler: Datei nicht gefunden!");
         return "Fehler: Datei nicht gefunden!";
     }
 
-    File file = SPIFFS.open(filename, "r");
+    File file = LittleFS.open(filename, "r");
     String html = file.readString();
     file.close();
 
@@ -207,105 +175,6 @@ void sendAmsData(AsyncWebSocketClient *client) {
     }
 }
 
-void handleUpdate(AsyncWebServer &server) {
-    AsyncCallbackWebHandler* updateHandler = new AsyncCallbackWebHandler();
-    updateHandler->setUri("/update");
-    updateHandler->setMethod(HTTP_POST);
-    
-    updateHandler->onUpload([](AsyncWebServerRequest *request, String filename,
-                             size_t index, uint8_t *data, size_t len, bool final) {
-        if (!index) {
-            updateTotalSize = request->contentLength();
-            updateWritten = 0;
-            isSpiffsUpdate = (filename.indexOf("website") > -1);
-            
-            if (isSpiffsUpdate) {
-                // Backup vor dem Update
-                sendUpdateProgress(0, "backup", "Backing up configurations...");
-                delay(200);
-                backupJsonConfigs();
-                delay(200);
-                
-                const esp_partition_t *partition = esp_partition_find_first(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_DATA_SPIFFS, NULL);
-                if (!partition || !Update.begin(partition->size, U_SPIFFS)) {
-                    request->send(400, "application/json", "{\"success\":false,\"message\":\"Update initialization failed\"}");
-                    return;
-                }
-                sendUpdateProgress(5, "starting", "Starting SPIFFS update...");
-                delay(200);
-            } else {
-                if (!Update.begin(updateTotalSize)) {
-                    request->send(400, "application/json", "{\"success\":false,\"message\":\"Update initialization failed\"}");
-                    return;
-                }
-                sendUpdateProgress(0, "starting", "Starting firmware update...");
-                delay(200);
-            }
-        }
-
-        if (len) {
-            if (Update.write(data, len) != len) {
-                request->send(400, "application/json", "{\"success\":false,\"message\":\"Write failed\"}");
-                return;
-            }
-            
-            updateWritten += len;
-            int currentProgress;
-            
-            // Berechne den Fortschritt basierend auf dem Update-Typ
-            if (isSpiffsUpdate) {
-                // SPIFFS: 5-75% für Upload
-                currentProgress = 5 + (updateWritten * 100) / updateTotalSize;
-            } else {
-                // Firmware: 0-100% für Upload
-                currentProgress = 1 + (updateWritten * 100) / updateTotalSize;
-            }
-            
-            static int lastProgress = -1;
-            if (currentProgress != lastProgress && (currentProgress % 10 == 0 || final)) {
-                sendUpdateProgress(currentProgress, "uploading");
-                oledShowMessage("Update: " + String(currentProgress) + "%");
-                delay(50);
-                lastProgress = currentProgress;
-            }
-        }
-
-        if (final) {
-            if (Update.end(true)) {
-                if (isSpiffsUpdate) {
-                    restoreJsonConfigs();
-                }
-            } else {
-                request->send(400, "application/json", "{\"success\":false,\"message\":\"Update finalization failed\"}");
-            }
-        }
-    });
-
-    updateHandler->onRequest([](AsyncWebServerRequest *request) {
-        if (Update.hasError()) {
-            request->send(400, "application/json", "{\"success\":false,\"message\":\"Update failed\"}");
-            return;
-        }
-
-        // Erste 100% Nachricht
-        ws.textAll("{\"type\":\"updateProgress\",\"progress\":100,\"status\":\"success\",\"message\":\"Update successful! Restarting device...\"}");
-        delay(2000);  // Längerer Delay für die erste Nachricht
-        
-        AsyncWebServerResponse *response = request->beginResponse(200, "application/json", 
-            "{\"success\":true,\"message\":\"Update successful! Restarting device...\"}");
-        response->addHeader("Connection", "close");
-        request->send(response);
-        
-        // Zweite 100% Nachricht zur Sicherheit
-        ws.textAll("{\"type\":\"updateProgress\",\"progress\":100,\"status\":\"success\",\"message\":\"Update successful! Restarting device...\"}");
-        delay(3000);  // Noch längerer Delay vor dem Neustart
-        
-        ESP.restart();
-    });
-
-    server.addHandler(updateHandler);
-}
-
 void setupWebserver(AsyncWebServer &server) {
     // Deaktiviere alle Debug-Ausgaben
     Serial.setDebugOutput(false);
@@ -326,7 +195,7 @@ void setupWebserver(AsyncWebServer &server) {
     // Route für about
     server.on("/about", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /about erhalten");
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/index.html.gz", "text/html");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/index.html.gz", "text/html");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -335,7 +204,7 @@ void setupWebserver(AsyncWebServer &server) {
     // Route für Waage
     server.on("/waage", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /waage erhalten");
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/waage.html.gz", "text/html");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/waage.html.gz", "text/html");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -344,7 +213,7 @@ void setupWebserver(AsyncWebServer &server) {
     // Route für RFID
     server.on("/", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /rfid erhalten");
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/rfid.html.gz", "text/html");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/rfid.html.gz", "text/html");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -360,7 +229,7 @@ void setupWebserver(AsyncWebServer &server) {
     // Route für WiFi
     server.on("/wifi", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /wifi erhalten");
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/wifi.html.gz", "text/html");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/wifi.html.gz", "text/html");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -370,7 +239,10 @@ void setupWebserver(AsyncWebServer &server) {
     server.on("/spoolman", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /spoolman erhalten");
         String html = loadHtmlWithHeader("/spoolman.html");
-        html.replace("{{spoolmanUrl}}", spoolmanUrl);
+        html.replace("{{spoolmanUrl}}", (spoolmanUrl != "") ? spoolmanUrl : "");
+        html.replace("{{spoolmanOctoEnabled}}", octoEnabled ? "checked" : "");
+        html.replace("{{spoolmanOctoUrl}}", (octoUrl != "") ? octoUrl : "");
+        html.replace("{{spoolmanOctoToken}}", (octoToken != "") ? octoToken : "");
 
         JsonDocument doc;
         if (loadJsonValue("/bambu_credentials.json", doc) && doc["bambu_ip"].is<String>()) 
@@ -387,6 +259,7 @@ void setupWebserver(AsyncWebServer &server) {
             html.replace("{{bambuSerial}}", bambuSerial ? bambuSerial : "");
             html.replace("{{bambuCode}}", bambuCode ? bambuCode : "");
             html.replace("{{autoSendToBambu}}", autoSendToBambu ? "checked" : "");
+            html.replace("{{autoSendTime}}", String(autoSetBambuAmsCounter));
         }
         else
         {
@@ -394,6 +267,7 @@ void setupWebserver(AsyncWebServer &server) {
             html.replace("{{bambuSerial}}", "");
             html.replace("{{bambuCode}}", "");
             html.replace("{{autoSendToBambu}}", "");
+            html.replace("{{autoSendTime}}", String(autoSetBambuAmsCounter));
         }
 
         request->send(200, "text/html", html);
@@ -406,10 +280,21 @@ void setupWebserver(AsyncWebServer &server) {
             return;
         }
 
-        String url = request->getParam("url")->value();
+        if (request->getParam("octoEnabled")->value() == "true" && (!request->hasParam("octoUrl") || !request->hasParam("octoToken"))) {
-        url.trim();
+            request->send(400, "application/json", "{\"success\": false, \"error\": \"Missing OctoPrint URL or Token parameter\"}");
+            return;
+        }
 
-        bool healthy = saveSpoolmanUrl(url);
+        String url = request->getParam("url")->value();
+        bool octoEnabled = (request->getParam("octoEnabled")->value() == "true") ? true : false;
+        String octoUrl = request->getParam("octoUrl")->value();
+        String octoToken = (request->getParam("octoToken")->value() != "") ? request->getParam("octoToken")->value() : "";
+
+        url.trim();
+        octoUrl.trim();
+        octoToken.trim();
+        
+        bool healthy = saveSpoolmanUrl(url, octoEnabled, octoUrl, octoToken);
         String jsonResponse = "{\"healthy\": " + String(healthy ? "true" : "false") + "}";
 
         request->send(200, "application/json", jsonResponse);
@@ -426,17 +311,19 @@ void setupWebserver(AsyncWebServer &server) {
         String bambu_serialnr = request->getParam("bambu_serialnr")->value();
         String bambu_accesscode = request->getParam("bambu_accesscode")->value();
         bool autoSend = (request->getParam("autoSend")->value() == "true") ? true : false;
-        Serial.println(autoSend);
+        String autoSendTime = request->getParam("autoSendTime")->value();
+        
         bambu_ip.trim();
         bambu_serialnr.trim();
         bambu_accesscode.trim();
+        autoSendTime.trim();
 
         if (bambu_ip.length() == 0 || bambu_serialnr.length() == 0 || bambu_accesscode.length() == 0) {
             request->send(400, "application/json", "{\"success\": false, \"error\": \"Empty parameter\"}");
             return;
         }
 
-        bool success = saveBambuCredentials(bambu_ip, bambu_serialnr, bambu_accesscode, autoSend);
+        bool success = saveBambuCredentials(bambu_ip, bambu_serialnr, bambu_accesscode, autoSend, autoSendTime);
 
         request->send(200, "application/json", "{\"healthy\": " + String(success ? "true" : "false") + "}");
     });
@@ -449,7 +336,7 @@ void setupWebserver(AsyncWebServer &server) {
     // Route für das Laden der CSS-Datei
     server.on("/style.css", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Lade style.css");
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/style.css.gz", "text/css");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/style.css.gz", "text/css");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -458,7 +345,7 @@ void setupWebserver(AsyncWebServer &server) {
 
     // Route für das Logo
     server.on("/logo.png", HTTP_GET, [](AsyncWebServerRequest *request){
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/logo.png.gz", "image/png");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/logo.png.gz", "image/png");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -467,7 +354,7 @@ void setupWebserver(AsyncWebServer &server) {
 
     // Route für Favicon
     server.on("/favicon.ico", HTTP_GET, [](AsyncWebServerRequest *request){
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/favicon.ico", "image/x-icon");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/favicon.ico", "image/x-icon");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
         Serial.println("favicon.ico gesendet");
@@ -475,17 +362,26 @@ void setupWebserver(AsyncWebServer &server) {
 
     // Route für spool_in.png
     server.on("/spool_in.png", HTTP_GET, [](AsyncWebServerRequest *request){
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/spool_in.png.gz", "image/png");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/spool_in.png.gz", "image/png");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
         Serial.println("spool_in.png gesendet");
     });
 
+    // Route für set_spoolman.png
+    server.on("/set_spoolman.png", HTTP_GET, [](AsyncWebServerRequest *request){
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/set_spoolman.png.gz", "image/png");
+        response->addHeader("Content-Encoding", "gzip");
+        response->addHeader("Cache-Control", CACHE_CONTROL);
+        request->send(response);
+        Serial.println("set_spoolman.png gesendet");
+    });
+
     // Route für JavaScript Dateien
     server.on("/spoolman.js", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /spoolman.js erhalten");
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/spoolman.js.gz", "text/javascript");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/spoolman.js.gz", "text/javascript");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -494,7 +390,7 @@ void setupWebserver(AsyncWebServer &server) {
 
     server.on("/rfid.js", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /rfid.js erhalten");
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS,"/rfid.js.gz", "text/javascript");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS,"/rfid.js.gz", "text/javascript");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -503,7 +399,7 @@ void setupWebserver(AsyncWebServer &server) {
 
     // Vereinfachter Update-Handler
     server.on("/upgrade", HTTP_GET, [](AsyncWebServerRequest *request) {
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/upgrade.html.gz", "text/html");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/upgrade.html.gz", "text/html");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", "no-store");
         request->send(response);
@@ -534,50 +430,3 @@ void setupWebserver(AsyncWebServer &server) {
     server.begin();
     Serial.println("Webserver gestartet");
 }
-
-
-void backupJsonConfigs() {
-    // Bambu Credentials backup
-    if (SPIFFS.exists("/bambu_credentials.json")) {
-        File file = SPIFFS.open("/bambu_credentials.json", "r");
-        if (file) {
-            bambuCredentialsBackup = file.readString();
-            file.close();
-            Serial.println("Bambu credentials backed up");
-        }
-    }
-
-    // Spoolman URL backup
-    if (SPIFFS.exists("/spoolman_url.json")) {
-        File file = SPIFFS.open("/spoolman_url.json", "r");
-        if (file) {
-            spoolmanUrlBackup = file.readString();
-            file.close();
-            Serial.println("Spoolman URL backed up");
-        }
-    }
-}
-
-void restoreJsonConfigs() {
-    // Restore Bambu credentials
-    if (bambuCredentialsBackup.length() > 0) {
-        File file = SPIFFS.open("/bambu_credentials.json", "w");
-        if (file) {
-            file.print(bambuCredentialsBackup);
-            file.close();
-            Serial.println("Bambu credentials restored");
-        }
-        bambuCredentialsBackup = ""; // Clear backup
-    }
-
-    // Restore Spoolman URL
-    if (spoolmanUrlBackup.length() > 0) {
-        File file = SPIFFS.open("/spoolman_url.json", "w");
-        if (file) {
-            file.print(spoolmanUrlBackup);
-            file.close();
-            Serial.println("Spoolman URL restored");
-        }
-        spoolmanUrlBackup = ""; // Clear backup
-    }
-}

src/website.h

@@ -19,7 +19,6 @@ extern AsyncWebSocket ws;
 
 // Server-Initialisierung und Handler
 void initWebServer();
-void handleUpload(AsyncWebServerRequest *request, String filename, size_t index, uint8_t *data, size_t len, bool final);
 void handleBody(AsyncWebServerRequest *request, uint8_t *data, size_t len, size_t index, size_t total);
 void setupWebserver(AsyncWebServer &server);
 
@@ -29,8 +28,4 @@ void sendNfcData(AsyncWebSocketClient *client);
 void foundNfcTag(AsyncWebSocketClient *client, uint8_t success);
 void sendWriteResult(AsyncWebSocketClient *client, uint8_t success);
 
-// Upgrade-Funktionen
-void backupJsonConfigs();
-void restoreJsonConfigs();
-
 #endif

src/wlan.cpp

@@ -3,16 +3,20 @@
 #include <WiFi.h>
 #include <esp_wifi.h>
 #include <WiFiManager.h>
+#include <DNSServer.h>
+#include <ESPmDNS.h>
 #include "display.h"
 #include "config.h"
 
 WiFiManager wm;
 bool wm_nonblocking = false;
+uint8_t wifiErrorCounter = 0;
 
-void initWiFi() {
+void wifiSettings() {
     // Optimierte WiFi-Einstellungen
     WiFi.mode(WIFI_STA); // explicitly set mode, esp defaults to STA+AP
     WiFi.setSleep(false); // disable sleep mode
+    WiFi.setHostname("FilaMan");
     esp_wifi_set_ps(WIFI_PS_NONE);
     
     // Maximale Sendeleistung
@@ -23,19 +27,45 @@ void initWiFi() {
     
     // Aktiviere WiFi-Roaming für bessere Stabilität
     esp_wifi_set_rssi_threshold(-80);
+}
+
+void startMDNS() {
+  if (!MDNS.begin("filaman")) {
+    Serial.println("Error setting up MDNS responder!");
+    while(1) {
+      vTaskDelay(1000 / portTICK_PERIOD_MS);
+    }
+  }
+  Serial.println("mDNS responder started");
+}
+
+void configModeCallback (WiFiManager *myWiFiManager) {
+  Serial.println("Entered config mode");
+  oledShowTopRow();
+  oledShowMessage("WiFi Config Mode");
+}
+
+void initWiFi() {
+  // load Wifi settings
+  wifiSettings();
+
+  wm.setAPCallback(configModeCallback);
+
+  wm.setSaveConfigCallback([]() {
+    Serial.println("Configurations updated");
+    ESP.restart();
+  });
 
   if(wm_nonblocking) wm.setConfigPortalBlocking(false);
-    wm.setConfigPortalTimeout(320); // Portal nach 5min schließen
+  //wm.setConfigPortalTimeout(320); // Portal nach 5min schließen
+  wm.setWiFiAutoReconnect(true);
+  wm.setConnectTimeout(5);
 
   oledShowTopRow();
   oledShowMessage("WiFi Setup");
   
-    bool res;
+  //bool res = wm.autoConnect("FilaMan"); // anonymous ap
-    // res = wm.autoConnect(); // auto generated AP name from chipid
+  if(!wm.autoConnect("FilaMan")) {
-    res = wm.autoConnect("FilaMan"); // anonymous ap
-    // res = wm.autoConnect("spoolman","password"); // password protected ap
-  
-    if(!res) {
     Serial.println("Failed to connect or hit timeout");
     // ESP.restart();
     oledShowTopRow();
@@ -51,5 +81,49 @@ void initWiFi() {
 
     oledShowTopRow();
     display.display();
+
+    vTaskDelay(500 / portTICK_PERIOD_MS);
+
+    // mDNS
+    startMDNS();
+  }
+}
+
+void checkWiFiConnection() {
+  if (WiFi.status() != WL_CONNECTED) 
+  {
+    Serial.println("WiFi connection lost. Reconnecting...");
+    wifiOn = false;
+    oledShowTopRow();
+    oledShowMessage("WiFi reconnecting");
+    WiFi.reconnect(); // Versuche, die Verbindung wiederherzustellen
+    vTaskDelay(5000 / portTICK_PERIOD_MS); // Warte 5 Sekunden, bevor erneut geprüft wird
+    if (WiFi.status() != WL_CONNECTED) 
+    {
+      Serial.println("Failed to reconnect. Restarting WiFi...");
+      WiFi.disconnect();
+      Serial.println("WiFi disconnected.");
+      vTaskDelay(1000 / portTICK_PERIOD_MS);
+      wifiErrorCounter++;
+
+      //wifiSettings();
+      WiFi.reconnect();
+      Serial.println("WiFi reconnecting...");
+      WiFi.waitForConnectResult();
+    } 
+    else 
+    {
+      Serial.println("WiFi reconnected.");
+      wifiErrorCounter = 0;
+      wifiOn = true;
+      oledShowTopRow();
+      startMDNS();
+    }
+  }
+
+  if (wifiErrorCounter >= 5) 
+  {
+    Serial.println("Too many WiFi errors. Restarting...");
+    ESP.restart();
   }
 }

src/wlan.h

@@ -4,5 +4,6 @@
 #include <Arduino.h>
 
 void initWiFi();
+void checkWiFiConnection();
 
 #endif