feat: erweitere Bambu-Credentials mit AutoSend-Wartezeit und aktualisiere die Benutzeroberfläche

.github/workflows/gitea-release.yml

@@ -6,16 +6,17 @@ on:
       GITEA_TOKEN:
         description: 'Token für Gitea API-Zugriff'
         required: true
-      FTP_PASSWORD:
+
-        description: 'FTP Password for firmware upload'
+    outputs:
-        required: true
+      version:
-      FTP_USER:
+        description: 'The version that was released'
-        description: 'FTP User for firmware upload'
+        value: ${{ jobs.create-release.outputs.version }}
-        required: true
 
 jobs:
   create-release:
     runs-on: ubuntu-latest
+    outputs:
+      version: ${{ steps.get_version.outputs.VERSION }}
     steps:
     - uses: actions/checkout@v4
       with:
@@ -205,22 +206,3 @@ jobs:
             fi
           fi
         done
-
-    - name: Install lftp
-      run: sudo apt-get install -y lftp
-      
-    - name: Upload Firmware via FTP
-      if: success()
-      env:
-        FTP_PASSWORD: ${{ secrets.FTP_PASSWORD }}
-        FTP_USER: ${{ secrets.FTP_USER }}
-        VERSION: ${{ steps.get_version.outputs.VERSION }}
-      run: |
-        cd .pio/build/esp32dev
-        lftp -c 'set ssl:verify-certificate no; \
-                 set ftp:ssl-protect-data true; \
-                 set ftp:ssl-force true; \
-                 set ssl:check-hostname false; \
-                 set ftp:ssl-auth TLS; \
-                 open -u '$FTP_USER','$FTP_PASSWORD' ftp://filaman.app:21; \
-                 put -O / filaman_full_'$VERSION'.bin -o filaman_full.bin'

.github/workflows/github-release.yml

@@ -150,3 +150,36 @@ jobs:
           echo "Error: No files found to upload"
           exit 1
         fi
+
+    - name: Install lftp
+      run: sudo apt-get install -y lftp
+        
+    - name: Upload Firmware via FTP
+      if: success()
+      env:
+        FTP_PASSWORD: ${{ vars.FTP_PASSWORD }}
+        FTP_USER: ${{ vars.FTP_USER }}
+        FTP_HOST: ${{ vars.FTP_HOST }}
+        VERSION: ${{ steps.get_version.outputs.VERSION }}
+      run: |
+        echo "Environment variables:"
+        env | grep -E '^FTP_' | while read -r line; do
+          var_name=$(echo "$line" | cut -d= -f1)
+          var_value=$(echo "$line" | cut -d= -f2-)
+          echo "$var_name is $(if [ -n "$var_value" ]; then echo "set"; else echo "empty"; fi)"
+        done
+        
+        cd .pio/build/esp32dev
+        if [ -n "$FTP_USER" ] && [ -n "$FTP_PASSWORD" ] && [ -n "$FTP_HOST" ]; then
+          echo "All FTP credentials are present, attempting upload..."
+          lftp -c "set ssl:verify-certificate no; \
+                    set ftp:ssl-protect-data true; \
+                    set ftp:ssl-force true; \
+                    set ssl:check-hostname false; \
+                    set ftp:ssl-auth TLS; \
+                    open -u $FTP_USER,$FTP_PASSWORD $FTP_HOST; \
+                    put -O / filaman_full_${VERSION}.bin -o filaman_full.bin"
+        else
+          echo "Error: Some FTP credentials are missing"
+          exit 1
+        fi

CHANGELOG.md

@@ -1,5 +1,123 @@
 # Changelog
 
+## [1.3.95] - 2025-02-24
+### Changed
+- update webpages for version v1.3.95
+
+### Fixed
+- bind autoSendToBambu variable to checkbox in spoolman.html
+
+
+## [1.3.94] - 2025-02-24
+### Changed
+- update webpages for version v1.3.94
+
+### Fixed
+- correct payload type check in NFC write event handling
+
+
+## [1.3.93] - 2025-02-24
+### Added
+- implement auto send feature for Bambu spool management and update related configurations
+- add debug mode instructions for Spoolman in README
+- add wiring diagrams to README for PN532 I2C setup
+
+### Changed
+- update webpages for version v1.3.93
+- simplify filament names in JSON configuration
+- update findFilamentIdx to return structured result and improve type searching logic
+- update README to reflect PN532 I2C configuration and remove SPI pin details
+
+### Fixed
+- remove debug output from splitTextIntoLines and update weight display logic in scanRfidTask
+- enhance weight display logic for negative values
+- remove unnecessary CPU frequency configuration from setup function
+
+
+## [1.3.92] - 2025-02-24
+### Changed
+- update webpages for version v1.3.92
+- remove commented-out code in setBambuSpool function
+- update installation instructions and formatting in README files
+
+### Fixed
+- configure CPU frequency settings in setup function only for testing
+- update comment to clarify NVS reading process
+- adjust weight display logic to handle cases for weight less than 2
+- update weight display logic to handle negative and specific weight cases
+
+
+## [1.3.91] - 2025-02-23
+### Added
+- update GitHub Actions workflow for FTP firmware upload with improved credential checks
+
+### Changed
+- update webpages for version v1.3.91
+
+
+## [1.3.90] - 2025-02-23
+### Added
+- update index.html for improved content structure and additional links
+- improve UI for Spoolman and Bambu Lab printer credentials, enhancing layout and styling
+- update README files with HSPI default PINs and add ESP32 pin diagram
+- implement scale calibration checks and update start_scale function to return calibration status
+- add FTP upload functionality to GitHub release workflow and update installation instructions in README
+
+### Changed
+- update webpages for version v1.3.90
+
+### Fixed
+- remove debug secrets check from Gitea release workflow
+
+
+## [1.3.89] - 2025-02-23
+### Changed
+- update webpages for version v1.3.89
+
+### Fixed
+- update Gitea release workflow to use vars for FTP credentials
+
+
+## [1.3.88] - 2025-02-23
+### Changed
+- update webpages for version v1.3.88
+
+### Fixed
+- update Gitea release workflow to use secrets for FTP credentials
+
+
+## [1.3.87] - 2025-02-23
+### Changed
+- update webpages for version v1.3.87
+
+### Fixed
+- enhance FTP upload workflow with credential checks and version output
+
+
+## [1.3.86] - 2025-02-23
+### Changed
+- update webpages for version v1.3.86
+
+### Fixed
+- streamline FTP credentials usage in Gitea release workflow
+
+
+## [1.3.85] - 2025-02-23
+### Added
+- add FTP_USER variable for Gitea release workflow
+
+### Changed
+- update webpages for version v1.3.85
+
+
+## [1.3.84] - 2025-02-23
+### Added
+- add FTP_HOST variable for firmware upload in Gitea release workflow
+
+### Changed
+- update webpages for version v1.3.84
+
+
 ## [1.3.83] - 2025-02-23
 ### Changed
 - update webpages for version v1.3.83

README.de.md

@@ -71,10 +71,15 @@ Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaO
 | OLED SCL          | 22        |
 | PN532 IRQ         | 32        |
 | PN532 RESET       | 33        |
-| PN532 SCK         | 14        |
+| PN532 SDA         | 21        |
-| PN532 MOSI        | 13        |
+| PN532 SCL         | 22        |
-| PN532 MISO        | 12        |
+
-| PN532 CS/SS       | 15        |
+**Achte darauf, dass am PN532 die DIP-Schalter auf I2C gestellt sind**
+
+![Wiring](./img/Schaltplan.png)
+
+![myWiring](./img/IMG_2589.jpeg)
+![myWiring](./img/IMG_2590.jpeg)
 
 ## Software-Abhängigkeiten
 
@@ -101,7 +106,31 @@ Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaO
   - PN532 NFC Modul
   - Verbindungskabel
 
-### Schritt-für-Schritt Installation
+## Wichtiger Hinweis
+Du musst Spoolman auf DEBUG Modus setzten, da man bisher in Spoolman keine CORS Domains setzen kann!
+
+```
+# Enable debug mode
+# If enabled, the client will accept requests from any host
+# This can be useful when developing, but is also a security risk
+# Default: FALSE
+#SPOOLMAN_DEBUG_MODE=TRUE
+```
+
+## Schritt-für-Schritt Installation
+### Einfache Installation
+1. **Gehe auf [FilaMan Installer](https://www.filaman.app/installer.html)**
+
+2. **Stecke dein ESP an den Rechner und klicke Connect**
+
+3. **Wähle dein Device Port und klicke Intall**
+
+4. **Ersteinrichtung:**
+    - Mit dem "FilaMan" WLAN-Zugangspunkt verbinden.
+    - WLAN-Einstellungen über das Konfigurationsportal vornehmen.
+    - Weboberfläche unter `http://filaman.local` oder der IP-Adresse aufrufen.
+
+### Compile by yourself
 1. **Repository klonen:**
     ```bash
     git clone https://github.com/ManuelW77/Filaman.git

README.md

@@ -75,10 +75,15 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
 | OLED SCL          | 22        |
 | PN532 IRQ         | 32        |
 | PN532 RESET       | 33        |
-| PN532 SCK  	    | 14        |
+| PN532 SDA         | 21        |
-| PN532 MOSI    	| 13        |
+| PN532 SCL         | 22        |
-| PN532 MISO       	| 12        |
+
-| PN532 CS/SS       | 15        |
+**Make sure that the DIP switches on the PN532 are set to I2C**
+
+![Wiring](./img/Schaltplan.png)
+
+![myWiring](./img/IMG_2589.jpeg)
+![myWiring](./img/IMG_2590.jpeg)
 
 ## Software Dependencies
 
@@ -91,9 +96,9 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
 - `Adafruit_SSD1306`: OLED display control
 - `HX711`: Load cell communication
 
-## Installation
+### Installation
 
-### Prerequisites
+## Prerequisites
 - **Software:**
   - [PlatformIO](https://platformio.org/) in VS Code
   - [Spoolman](https://github.com/Donkie/Spoolman) instance
@@ -105,7 +110,32 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
   - PN532 NFC Module
   - Connecting wires
 
-### Step-by-Step Installation
+## Important Note
+You have to activate Spoolman in debug mode, because you are not able to set CORS Domains in Spoolman yet.
+
+```
+# Enable debug mode
+# If enabled, the client will accept requests from any host
+# This can be useful when developing, but is also a security risk
+# Default: FALSE
+#SPOOLMAN_DEBUG_MODE=TRUE
+```
+
+
+## Step-by-Step Installation
+### Easy Installation
+1. **Go to [FilaMan Installer](https://www.filaman.app/installer.html)**
+
+2. **Plug you device in and push Connect button**
+
+3. **Select your Device Port and push Intall**
+
+4. **Initial Setup:**
+    - Connect to the "FilaMan" WiFi access point.
+    - Configure WiFi settings through the captive portal.
+    - Access the web interface at `http://filaman.local` or the IP address.
+
+### Compile by yourself
 1. **Clone the Repository:**
     ```bash
     git clone https://github.com/ManuelW77/Filaman.git
@@ -124,25 +154,6 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
     - Configure WiFi settings through the captive portal.
     - Access the web interface at `http://filaman.local` or the IP address.
 
-## GitHub Actions Configuration
-
-### Required Secrets for Gitea Releases
-
-When using Gitea as your repository host, you need to configure the following secrets in your repository:
-
-- `GITEA_API_URL`: The base URL of your Gitea instance, including protocol (e.g., `https://git.example.com`)
-- `GITEA_TOKEN`: Your Gitea access token with permissions to create releases
-- `GITEA_REPOSITORY`: The repository name in format `owner/repo` (e.g., `username/filaman`)
-
-Example values:
-```
-GITEA_API_URL=https://git.example.com
-GITEA_TOKEN=abcdef1234567890
-GITEA_REPOSITORY=username/filaman
-```
-
-Make sure to set these secrets in your repository settings under Settings > Secrets and Variables > Actions.
-
 ## Documentation
 
 ### Relevant Links

html/bambu_filaments.json

@@ -1,7 +1,31 @@
 {
-    "GFU99": "Generic TPU",
+    "GFU99": "TPU",
-    "GFN99": "Generic PA",
+    "GFN99": "PA",
-    "GFN98": "Generic PA-CF",
+    "GFN98": "PA-CF",
+    "GFL99": "PLA",
+    "GFL96": "PLA Silk",
+    "GFL98": "PLA-CF",
+    "GFL95": "PLA High Speed",
+    "GFG99": "PETG",
+    "GFG98": "PETG-CF",
+    "GFG97": "PCTG",
+    "GFB99": "ABS",
+    "GFC99": "PC",
+    "GFB98": "ASA",
+    "GFS99": "PVA",
+    "GFS98": "HIPS",
+    "GFT98": "PPS-CF",
+    "GFT97": "PPS",
+    "GFN97": "PPA-CF",
+    "GFN96": "PPA-GF",
+    "GFP99": "PE",
+    "GFP98": "PE-CF",
+    "GFP97": "PP",
+    "GFP96": "PP-CF",
+    "GFP95": "PP-GF",
+    "GFR99": "EVA",
+    "GFR98": "PHA",
+    "GFS97": "BVOH",
     "GFA01": "Bambu PLA Matte",
     "GFA00": "Bambu PLA Basic",
     "GFA09": "Bambu PLA Tough",
@@ -13,15 +37,11 @@
     "GFL03": "eSUN PLA+",
     "GFL01": "PolyTerra PLA",
     "GFL00": "PolyLite PLA",
-    "GFL99": "Generic PLA",
-    "GFL96": "Generic PLA Silk",
-    "GFL98": "Generic PLA-CF",
     "GFA50": "Bambu PLA-CF",
     "GFS02": "Bambu Support For PLA",
     "GFA11": "Bambu PLA Aero",
     "GFL04": "Overture PLA",
     "GFL05": "Overture Matte PLA",
-    "GFL95": "Generic PLA High Speed",
     "GFA12": "Bambu PLA Glow",
     "GFA13": "Bambu PLA Dynamic",
     "GFA15": "Bambu PLA Galaxy",
@@ -30,41 +50,21 @@
     "GFU00": "Bambu TPU 95A HF",
     "GFG00": "Bambu PETG Basic",
     "GFT01": "Bambu PET-CF",
-    "GFG99": "Generic PETG",
-    "GFG98": "Generic PETG-CF",
     "GFG50": "Bambu PETG-CF",
     "GFG60": "PolyLite PETG",
     "GFG01": "Bambu PETG Translucent",
-    "GFG97": "Generic PCTG",
     "GFB00": "Bambu ABS",
-    "GFB99": "Generic ABS",
     "GFB60": "PolyLite ABS",
     "GFB50": "Bambu ABS-GF",
     "GFC00": "Bambu PC",
-    "GFC99": "Generic PC",
-    "GFB98": "Generic ASA",
     "GFB01": "Bambu ASA",
     "GFB61": "PolyLite ASA",
     "GFB02": "Bambu ASA-Aero",
-    "GFS99": "Generic PVA",
     "GFS04": "Bambu PVA",
     "GFS01": "Bambu Support G",
     "GFN03": "Bambu PA-CF",
     "GFN04": "Bambu PAHT-CF",
     "GFS03": "Bambu Support For PA/PET",
     "GFN05": "Bambu PA6-CF",
-    "GFN08": "Bambu PA6-GF",
+    "GFN08": "Bambu PA6-GF"
-    "GFS98": "Generic HIPS",
-    "GFT98": "Generic PPS-CF",
-    "GFT97": "Generic PPS",
-    "GFN97": "Generic PPA-CF",
-    "GFN96": "Generic PPA-GF",
-    "GFP99": "Generic PE",
-    "GFP98": "Generic PE-CF",
-    "GFP97": "Generic PP",
-    "GFP96": "Generic PP-CF",
-    "GFP95": "Generic PP-GF",
-    "GFR99": "Generic EVA",
-    "GFR98": "Generic PHA",
-    "GFS97": "Generic BVOH"
 }

html/index.html

@@ -47,7 +47,7 @@
 
 <!-- head -->
 
-    <div class="container">
+    <div class="content">
         <h1>FilaMan</h1>
         <p>Filament Management Tool</p>
         <p>Your smart solution for <strong>Filament Management</strong> in 3D printing.</p>
@@ -55,10 +55,11 @@
         <h2>About FilaMan</h2>
         <p>
             FilaMan is a tool designed to simplify filament spool management. It allows you to identify and weigh filament spools, 
-            automatically sync data with the self-hosted <a href="https://github.com/Donkie/Spoolman" target="_blank">Spoolman</a> platform, 
+            automatically sync data with the self-hosted <a href="https://github.com/Donkie/Spoolman" target="_blank">Spoolman</a> platform.
-            and ensure compatibility with <a href="https://github.com/spuder/OpenSpool" target="_blank">OpenSpool</a> for Bambu printers.
         </p>
 
+        <p>Get more information at <a href="https://www.filaman.app" target="_blank">https://www.filaman.app</a> and <a href="https://github.com/ManuelW77/Filaman" target="_blank">https://github.com/ManuelW77/Filaman</a>.</p>
+
         <div class="features">
             <div class="feature">
                 <h3>Spool Identification</h3>
@@ -73,12 +74,6 @@
                 <p>Works with OpenSpool to recognize and activate spools on Bambu printers.</p>
             </div>
         </div>
-
-        <h2>Future Plans</h2>
-        <p>
-            We are working on expanding compatibility to support smaller NFC tags like NTag213 
-            and developing custom software to enhance the OpenSpool experience.
-        </p>
     </div>
 </body>
 </html>

html/own_filaments.json

@@ -0,0 +1,31 @@
+{
+    "TPU": "GFU99",
+    "PA": "GFN99",
+    "PA-CF": "GFN98",
+    "PLA": "GFL99",
+    "PLA Silk": "GFL96",
+    "PLA-CF": "GFL98",
+    "PLA High Speed": "GFL95",
+    "PETG": "GFG99",
+    "PETG-CF": "GFG98",
+    "PCTG": "GFG97",
+    "ABS": "GFB99",
+    "ABS+HS": "GFB99",
+    "PC": "GFC99",
+    "PC/ABS": "GFC99",
+    "ASA": "GFB98",
+    "PVA": "GFS99",
+    "HIPS": "GFS98",
+    "PPS-CF": "GFT98",
+    "PPS": "GFT97",
+    "PPA-CF": "GFN97",
+    "PPA-GF": "GFN96",
+    "PE": "GFP99",
+    "PE-CF": "GFP98",
+    "PP": "GFP97",
+    "PP-CF": "GFP96",
+    "PP-GF": "GFP95",
+    "EVA": "GFR99",
+    "PHA": "GFR98",
+    "BVOH": "GFS97"
+}

html/spoolman.html

@@ -74,8 +74,9 @@
             const ip = document.getElementById('bambuIp').value;
             const serial = document.getElementById('bambuSerial').value;
             const code = document.getElementById('bambuCode').value;
+            const autoSend = document.getElementById('autoSend').checked;
 
-            fetch(`/api/bambu?bambu_ip=${encodeURIComponent(ip)}&bambu_serialnr=${encodeURIComponent(serial)}&bambu_accesscode=${encodeURIComponent(code)}`)
+            fetch(`/api/bambu?bambu_ip=${encodeURIComponent(ip)}&bambu_serialnr=${encodeURIComponent(serial)}&bambu_accesscode=${encodeURIComponent(code)}&autoSend=${autoSend}$autoSendTime=${autoSendTime}`)
                 .then(response => response.json())
                 .then(data => {
                     if (data.healthy) {
@@ -95,27 +96,47 @@
     
     <div class="content">
         <h1>Spoolman API URL / Bambu Credentials</h1>
-        <label for="spoolmanUrl">Set URL/IP to your Spoolman-Instanz:</label>
-        <input type="text" id="spoolmanUrl" placeholder="http://ip-or-url-of-your-spoolman-instanz:port">
-        <button onclick="checkSpoolmanInstance()">Save Spoolman URL</button>
-        <p id="statusMessage"></p>
 
-        <h2>Bambu Lab Printer Credentials</h2>
+        <div class="card">
-        <div class="bambu-settings">
+            <div class="card-body">
-            <div class="input-group">
+                <h5 class="card-title">Set URL/IP to your Spoolman-Instanz</h5>
-                <label for="bambuIp">Bambu Drucker IP-Adresse:</label>
+                <input type="text" id="spoolmanUrl" placeholder="http://ip-or-url-of-your-spoolman-instanz:port">
-                <input type="text" id="bambuIp" placeholder="192.168.1.xxx" value="{{bambuIp}}">
+                <button onclick="checkSpoolmanInstance()">Save Spoolman URL</button>
+                <p id="statusMessage"></p>
             </div>
-            <div class="input-group">
+        </div>
-                <label for="bambuSerial">Drucker Seriennummer:</label>
+
-                <input type="text" id="bambuSerial" placeholder="BBLXXXXXXXX" value="{{bambuSerial}}">
+        <div class="card">
+            <div class="card-body">
+                <h5 class="card-title">Bambu Lab Printer Credentials</h5>
+                <div class="bambu-settings">
+                    <div class="input-group">
+                        <label for="bambuIp">Bambu Drucker IP-Adresse:</label>
+                        <input type="text" id="bambuIp" placeholder="192.168.1.xxx" value="{{bambuIp}}">
+                    </div>
+                    <div class="input-group">
+                        <label for="bambuSerial">Drucker Seriennummer:</label>
+                        <input type="text" id="bambuSerial" placeholder="BBLXXXXXXXX" value="{{bambuSerial}}">
+                    </div>
+                    <div class="input-group">
+                        <label for="bambuCode">Access Code:</label>
+                        <input type="text" id="bambuCode" placeholder="Access Code vom Drucker" value="{{bambuCode}}">
+                    </div>
+                    <hr>
+                    <p>If activated, FilaMan will automatically update the next filled tray with the last scanned and weighed spool.</p>
+                    <div class="input-group" style="display: flex; margin-bottom: 0;">
+                        <label for="autoSend" style="width: 250px; margin-right: 5px;">Auto Send to Bambu:</label>
+                        <label for="autoSendTime" style="width: 250px; margin-right: 5px;">Wait time in Seconds:</label>
+                    </div>
+                    <div class="input-group" style="display: flex;">
+                        <input type="checkbox" id="autoSend" {{autoSendToBambu}} style="width: 190px; margin-right: 10px;">
+                        <input type="text" id="autoSendTime" placeholder="Time to wait for new Spool" value="{{autoSendTime}}" style="width: 100px;">
+                    </div>
+
+                    <button style="margin: 0;" onclick="saveBambuCredentials()">Save Bambu Credentials</button>
+                    <p id="bambuStatusMessage"></p>
+                </div>
             </div>
-            <div class="input-group">
-                <label for="bambuCode">Access Code:</label>
-                <input type="text" id="bambuCode" placeholder="Access Code vom Drucker" value="{{bambuCode}}">
-            </div>
-            <button onclick="saveBambuCredentials()">Save Bambu Credentials</button>
-            <p id="bambuStatusMessage"></p>
         </div>
     </div>
 </body>

html/style.css

@@ -279,9 +279,10 @@ a:hover {
 
 /* Karten-Stil für optische Trennung */
 .card {
-    background: #f9f9f9;
+    background: var(--primary-color);
+    width: 500px;
     padding: 15px;
-    margin: 20px 0;
+    margin: 20px auto;
     border-radius: 8px;
     box-shadow: 0 2px 4px rgba(0, 0, 0, 0.1);
 }
@@ -959,7 +960,6 @@ input[type="submit"]:disabled,
 
 /* Bambu Settings Erweiterung */
 .bambu-settings {
-    background: white;
     padding: 20px;
     border-radius: 8px;
     box-shadow: 0 2px 4px rgba(0, 0, 0, 0.1);

platformio.ini

@@ -9,7 +9,7 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [common]
-version = "1.3.83"
+version = "1.3.95"
 ##
 [env:esp32dev]
 platform = espressif32

src/api.cpp

@@ -37,9 +37,9 @@ struct SendToApiParams {
     }
 */
 
-JsonDocument fetchSpoolsForWebsite() {
+JsonDocument fetchSingleSpoolInfo(int spoolId) {
     HTTPClient http;
-    String spoolsUrl = spoolmanUrl + apiUrl + "/spool";
+    String spoolsUrl = spoolmanUrl + apiUrl + "/spool/" + spoolId;
 
     Serial.print("Rufe Spool-Daten von: ");
     Serial.println(spoolsUrl);
@@ -56,84 +56,45 @@ JsonDocument fetchSpoolsForWebsite() {
             Serial.print("Fehler beim Parsen der JSON-Antwort: ");
             Serial.println(error.c_str());
         } else {
-            JsonArray spools = doc.as<JsonArray>();
+            String filamentType = doc["filament"]["material"].as<String>();
-            JsonArray filteredSpools = filteredDoc.to<JsonArray>();
+            String filamentBrand = doc["filament"]["vendor"]["name"].as<String>();
 
-            for (JsonObject spool : spools) {
+            int nozzle_temp_min = 0;
-                JsonObject filteredSpool = filteredSpools.add<JsonObject>();
+            int nozzle_temp_max = 0;
-                filteredSpool["extra"]["nfc_id"] = spool["extra"]["nfc_id"];
+            if (doc["filament"]["extra"]["nozzle_temperature"].is<String>()) {
+                String tempString = doc["filament"]["extra"]["nozzle_temperature"].as<String>();
+                tempString.replace("[", "");
+                tempString.replace("]", "");
+                int commaIndex = tempString.indexOf(',');
                 
-                JsonObject filament = filteredSpool["filament"].to<JsonObject>();
+                if (commaIndex != -1) {
-                filament["sm_id"] = spool["id"];
+                    nozzle_temp_min = tempString.substring(0, commaIndex).toInt();
-                filament["id"] = spool["filament"]["id"];
+                    nozzle_temp_max = tempString.substring(commaIndex + 1).toInt();
-                filament["name"] = spool["filament"]["name"];
+                }
-                filament["material"] = spool["filament"]["material"];
-                filament["color_hex"] = spool["filament"]["color_hex"];
-                filament["nozzle_temperature"] = spool["filament"]["extra"]["nozzle_temperature"]; // [190,230]
-                filament["price_meter"] = spool["filament"]["extra"]["price_meter"];
-                filament["price_gramm"] = spool["filament"]["extra"]["price_gramm"];
-
-                JsonObject vendor = filament["vendor"].to<JsonObject>();
-                vendor["id"] = spool["filament"]["vendor"]["id"];
-                vendor["name"] = spool["filament"]["vendor"]["name"];
             } 
-        }
-    } else {
-        Serial.print("Fehler beim Abrufen der Spool-Daten. HTTP-Code: ");
-        Serial.println(httpCode);
-    }
 
-    http.end();
+            String filamentColor = doc["filament"]["color_hex"].as<String>();
-    return filteredDoc;
+            filamentColor.toUpperCase();
-}
 
-JsonDocument fetchAllSpoolsInfo() {
+            String tray_info_idx = doc["filament"]["extra"]["bambu_idx"].as<String>();
-    HTTPClient http;
+            tray_info_idx.replace("\"", "");
-    String spoolsUrl = spoolmanUrl + apiUrl + "/spool";
             
-    Serial.print("Rufe Spool-Daten von: ");
+            String cali_idx = doc["filament"]["extra"]["bambu_cali_id"].as<String>(); // "\"153\""
-    Serial.println(spoolsUrl);
+            cali_idx.replace("\"", "");
             
-    http.begin(spoolsUrl);
+            String bambu_setting_id = doc["filament"]["extra"]["bambu_setting_id"].as<String>(); // "\"PFUSf40e9953b40d3d\""
-    int httpCode = http.GET();
+            bambu_setting_id.replace("\"", "");
 
-    JsonDocument filteredDoc;
+            doc.clear();
-    if (httpCode == HTTP_CODE_OK) {
-        String payload = http.getString();
-        JsonDocument doc;
-        DeserializationError error = deserializeJson(doc, payload);
-        if (error) {
-            Serial.print("Fehler beim Parsen der JSON-Antwort: ");
-            Serial.println(error.c_str());
-        } else {
-            JsonArray spools = doc.as<JsonArray>();
-            JsonArray filteredSpools = filteredDoc.to<JsonArray>();
 
-            for (JsonObject spool : spools) {
+            filteredDoc["color"] = filamentColor;
-                JsonObject filteredSpool = filteredSpools.add<JsonObject>();
+            filteredDoc["type"] = filamentType;
-                filteredSpool["price"] = spool["price"];
+            filteredDoc["nozzle_temp_min"] = nozzle_temp_min;
-                filteredSpool["remaining_weight"] = spool["remaining_weight"];
+            filteredDoc["nozzle_temp_max"] = nozzle_temp_max;
-                filteredSpool["used_weight"] = spool["used_weight"];
+            filteredDoc["brand"] = filamentBrand;
-                filteredSpool["extra"]["nfc_id"] = spool["extra"]["nfc_id"];
+            filteredDoc["tray_info_idx"] = tray_info_idx;
-
+            filteredDoc["cali_idx"] = cali_idx;
-                JsonObject filament = filteredSpool["filament"].to<JsonObject>();
+            filteredDoc["bambu_setting_id"] = bambu_setting_id;
-                filament["id"] = spool["filament"]["id"];
-                filament["name"] = spool["filament"]["name"];
-                filament["material"] = spool["filament"]["material"];
-                filament["density"] = spool["filament"]["density"];
-                filament["diameter"] = spool["filament"]["diameter"];
-                filament["spool_weight"] = spool["filament"]["spool_weight"];
-                filament["color_hex"] = spool["filament"]["color_hex"];
-
-                JsonObject vendor = filament["vendor"].to<JsonObject>();
-                vendor["id"] = spool["filament"]["vendor"]["id"];
-                vendor["name"] = spool["filament"]["vendor"]["name"];
-
-                JsonObject extra = filament["extra"].to<JsonObject>();
-                extra["nozzle_temperature"] = spool["filament"]["extra"]["nozzle_temperature"];
-                extra["price_gramm"] = spool["filament"]["extra"]["price_gramm"];
-                extra["price_meter"] = spool["filament"]["extra"]["price_meter"];
-            }
         }
     } else {
         Serial.print("Fehler beim Abrufen der Spool-Daten. HTTP-Code: ");

src/api.h

@@ -14,8 +14,7 @@ bool checkSpoolmanInstance(const String& url);
 bool saveSpoolmanUrl(const String& url);
 String loadSpoolmanUrl(); // Neue Funktion zum Laden der URL
 bool checkSpoolmanExtraFields(); // Neue Funktion zum Überprüfen der Extrafelder
-JsonDocument fetchSpoolsForWebsite(); // API-Funktion für die Webseite
+JsonDocument fetchSingleSpoolInfo(int spoolId); // API-Funktion für die Webseite
-JsonDocument fetchAllSpoolsInfo();
 void sendAmsData(AsyncWebSocketClient *client); // Neue Funktion zum Senden von AMS-Daten
 bool updateSpoolTagId(String uidString, const char* payload); // Neue Funktion zum Aktualisieren eines Spools
 uint8_t updateSpoolWeight(String spoolId, uint16_t weight); // Neue Funktion zum Aktualisieren des Gewichts

src/bambu.cpp

@@ -24,13 +24,15 @@ const char* bambu_ip = nullptr;
 const char* bambu_accesscode = nullptr;
 const char* bambu_serialnr = nullptr;
 bool bambu_connected = false;
+bool autoSendToBambu = false;
+int autoSetToBambuSpoolId = 0;
 
 // Globale Variablen für AMS-Daten
 int ams_count = 0;
 String amsJsonData;  // Speichert das fertige JSON für WebSocket-Clients
-AMSData ams_data[MAX_AMS];  // Definition des Arrays
+AMSData ams_data[MAX_AMS];  // Definition des Arrays;
 
-bool saveBambuCredentials(const String& ip, const String& serialnr, const String& accesscode) {
+bool saveBambuCredentials(const String& ip, const String& serialnr, const String& accesscode, bool autoSend, const String& autoSendTime) {
     if (BambuMqttTask) {
         vTaskDelete(BambuMqttTask);
     }
@@ -39,6 +41,8 @@ bool saveBambuCredentials(const String& ip, const String& serialnr, const String
     doc["bambu_ip"] = ip;
     doc["bambu_accesscode"] = accesscode;
     doc["bambu_serialnr"] = serialnr;
+    doc["autoSendToBambu"] = autoSend;
+    doc["autoSendTime"] = (autoSendTime != "") ? autoSendTime.toInt() : autoSetBambuAmsCounter;
 
     if (!saveJsonValue("/bambu_credentials.json", doc)) {
         Serial.println("Fehler beim Speichern der Bambu-Credentials.");
@@ -49,6 +53,8 @@ bool saveBambuCredentials(const String& ip, const String& serialnr, const String
     bambu_ip = ip.c_str();
     bambu_accesscode = accesscode.c_str();
     bambu_serialnr = serialnr.c_str();
+    autoSendToBambu = autoSend;
+    autoSetBambuAmsCounter = autoSendTime.toInt();
 
     vTaskDelay(100 / portTICK_PERIOD_MS);
     if (!setupMqtt()) return false;
@@ -63,6 +69,8 @@ bool loadBambuCredentials() {
         String ip = doc["bambu_ip"].as<String>();
         String code = doc["bambu_accesscode"].as<String>();
         String serial = doc["bambu_serialnr"].as<String>();
+        if (doc["autoSendToBambu"].is<bool>()) autoSendToBambu = doc["autoSendToBambu"].as<bool>();
+        if (doc["autoSendTime"].is<int>()) autoSetBambuAmsCounter = doc["autoSendTime"].as<int>();
 
         ip.trim();
         code.trim();
@@ -81,19 +89,48 @@ bool loadBambuCredentials() {
     return false;
 }
 
-String findFilamentIdx(String brand, String type) {
+struct FilamentResult {
+    String key;
+    String type;
+};
+
+FilamentResult findFilamentIdx(String brand, String type) {
     // JSON-Dokument für die Filament-Daten erstellen
     JsonDocument doc;
     
-    // Laden der bambu_filaments.json
+    // Laden der own_filaments.json
-    if (!loadJsonValue("/bambu_filaments.json", doc)) {
+    String ownFilament = "";
-        Serial.println("Fehler beim Laden der Filament-Daten");
+    if (!loadJsonValue("/own_filaments.json", doc)) 
-        return "GFL99"; // Fallback auf Generic PLA
+    {
+        Serial.println("Fehler beim Laden der eigenen Filament-Daten");
+    }
+    else
+    {
+        // Durchsuche direkt nach dem Type als Schlüssel
+        if (doc[type].is<String>()) {
+            ownFilament = doc[type].as<String>();
+        }
+        doc.clear();
     }
 
-    String searchKey;
+    // Laden der bambu_filaments.json
+    if (!loadJsonValue("/bambu_filaments.json", doc)) 
+    {
+        Serial.println("Fehler beim Laden der Filament-Daten");
+        return {"GFL99", "PLA"}; // Fallback auf Generic PLA
+    }
 
-    // 1. Suche nach Brand + Type Kombination
+    // Wenn eigener Typ
+    if (ownFilament != "")
+    {
+        if (doc[ownFilament].is<String>()) 
+        {
+            return {ownFilament, doc[ownFilament].as<String>()};
+        }
+    }
+
+    // 1. Erst versuchen wir die exakte Brand + Type Kombination zu finden
+    String searchKey;
     if (brand == "Bambu" || brand == "Bambulab") {
         searchKey = "Bambu " + type;
     } else if (brand == "PolyLite") {
@@ -109,20 +146,43 @@ String findFilamentIdx(String brand, String type) {
     // Durchsuche alle Einträge nach der Brand + Type Kombination
     for (JsonPair kv : doc.as<JsonObject>()) {
         if (kv.value().as<String>() == searchKey) {
-            return kv.key().c_str();
+            return {kv.key().c_str(), kv.value().as<String>()};
         }
     }
 
-    // 2. Wenn nicht gefunden, suche nach Generic + Type
+    // 2. Wenn nicht gefunden, zerlege den type String in Wörter und suche nach jedem Wort
-    searchKey = "Generic " + type;
+    // Sammle alle vorhandenen Filamenttypen aus der JSON
+    std::vector<String> knownTypes;
     for (JsonPair kv : doc.as<JsonObject>()) {
-        if (kv.value().as<String>() == searchKey) {
+        String value = kv.value().as<String>();
-            return kv.key().c_str();
+        // Extrahiere den Typ ohne Markennamen
+        if (value.indexOf(" ") != -1) {
+            value = value.substring(value.indexOf(" ") + 1);
+        }
+        if (!value.isEmpty()) {
+            knownTypes.push_back(value);
+        }
+    }
+
+    // Zerlege den Input-Type in Wörter
+    String typeStr = type;
+    typeStr.trim();
+    
+    // Durchsuche für jedes bekannte Filament, ob es im Input vorkommt
+    for (const String& knownType : knownTypes) {
+        if (typeStr.indexOf(knownType) != -1) {
+            // Suche nach diesem Typ in der Original-JSON
+            for (JsonPair kv : doc.as<JsonObject>()) {
+                String value = kv.value().as<String>();
+                if (value.indexOf(knownType) != -1) {
+                    return {kv.key().c_str(), knownType};
+                }
+            }
         }
     }
 
     // 3. Wenn immer noch nichts gefunden, gebe GFL99 zurück (Generic PLA)
-    return "GFL99";
+    return {"GFL99", "PLA"};
 }
 
 bool sendMqttMessage(String payload) {
@@ -156,15 +216,22 @@ bool setBambuSpool(String payload) {
     int minTemp = doc["nozzle_temp_min"];
     int maxTemp = doc["nozzle_temp_max"];
     String type = doc["type"].as<String>();
+    (type == "PLA+") ? type = "PLA" : type;
     String brand = doc["brand"].as<String>();
     String tray_info_idx = (doc["tray_info_idx"].as<String>() != "-1") ? doc["tray_info_idx"].as<String>() : "";
-    if (tray_info_idx == "") tray_info_idx = (brand != "" && type != "") ? findFilamentIdx(brand, type) : "";
+    if (tray_info_idx == "") {
+        if (brand != "" && type != "") {
+            FilamentResult result = findFilamentIdx(brand, type);
+            tray_info_idx = result.key;
+            type = result.type;  // Aktualisiere den type mit dem gefundenen Basistyp
+        }
+    }
     String setting_id = doc["bambu_setting_id"].as<String>();
     String cali_idx = doc["cali_idx"].as<String>();
 
     doc.clear();
 
-    doc["print"]["sequence_id"] = 0;
+    doc["print"]["sequence_id"] = "0";
     doc["print"]["command"] = "ams_filament_setting";
     doc["print"]["ams_id"] = amsId < 200 ? amsId : 255;
     doc["print"]["tray_id"] = trayId < 200 ? trayId : 254;
@@ -172,7 +239,7 @@ bool setBambuSpool(String payload) {
     doc["print"]["nozzle_temp_min"] = minTemp;
     doc["print"]["nozzle_temp_max"] = maxTemp;
     doc["print"]["tray_type"] = type;
-    doc["print"]["cali_idx"] = (cali_idx != "") ? cali_idx : "";
+    //doc["print"]["cali_idx"] = (cali_idx != "") ? cali_idx : "";
     doc["print"]["tray_info_idx"] = tray_info_idx;
     doc["print"]["setting_id"] = setting_id;
     
@@ -194,13 +261,13 @@ bool setBambuSpool(String payload) {
 
     if (cali_idx != "") {
         yield();
-        doc["print"]["sequence_id"] = 0;
+        doc["print"]["sequence_id"] = "0";
         doc["print"]["command"] = "extrusion_cali_sel";
         doc["print"]["filament_id"] = tray_info_idx;
         doc["print"]["nozzle_diameter"] = "0.4";
         doc["print"]["cali_idx"] = cali_idx.toInt();
         doc["print"]["tray_id"] = trayId < 200 ? trayId : 254;
-        doc["print"]["ams_id"] = amsId < 200 ? amsId : 255;
+        //doc["print"]["ams_id"] = amsId < 200 ? amsId : 255;
 
         // Serialize the JSON
         String output;
@@ -218,44 +285,34 @@ bool setBambuSpool(String payload) {
         doc.clear();
         yield();
     }
-/*
-    if (setting_id != "") {
-        yield();
-        doc["print"]["sequence_id"] = 0;
-        doc["print"]["command"] = "ams_filament_setting";
-        doc["print"]["nozzle_temp_min"] = minTemp;
-        doc["print"]["nozzle_temp_max"] = maxTemp;
-        doc["print"]["setting_id"] = setting_id;
-        doc["print"]["tray_color"] = color.length() == 8 ? color : color+"FF";
-        doc["print"]["ams_id"] = amsId < 200 ? amsId : 255;
-        doc["print"]["tray_id"] = trayId < 200 ? trayId : 254;
-        doc["print"]["tray_info_idx"] = tray_info_idx;
-        doc["print"]["tray_type"] = type;
-
-        // Serialize the JSON
-        String output;
-        serializeJson(doc, output);
-
-        if (sendMqttMessage(output)) {
-            Serial.println("Filament Setting successfully set");
-        }
-        else
-        {
-            Serial.println("Failed to set Filament setting");
-            return false;
-        }
-
-        doc.clear();
-        yield();
-    }
-*/
 
     return true;
 }
 
+void autoSetSpool(int spoolId, uint8_t trayId) {
+    // wenn neue spule erkannt und autoSetToBambu > 0
+    JsonDocument spoolInfo = fetchSingleSpoolInfo(spoolId);
+
+    if (!spoolInfo.isNull())
+    {
+        // AMS und TRAY id ergänzen
+        spoolInfo["amsId"] = 0;
+        spoolInfo["trayId"] = trayId;
+
+        Serial.println("Auto set spool");
+        Serial.println(spoolInfo.as<String>());
+
+        setBambuSpool(spoolInfo.as<String>());
+    }
+
+    // id wieder zurücksetzen damit abgeschlossen
+    autoSetToBambuSpoolId = 0;
+}
+
 // init
 void mqtt_callback(char* topic, byte* payload, unsigned int length) {
     String message;
+
     for (int i = 0; i < length; i++) {
         message += (char)payload[i];
     }
@@ -263,16 +320,27 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
     // JSON-Dokument parsen
     JsonDocument doc;
     DeserializationError error = deserializeJson(doc, message);
-    if (error) {
+    if (error) 
+    {
         Serial.print("Fehler beim Parsen des JSON: ");
         Serial.println(error.c_str());
         return;
     }
 
+    // Wenn bambu auto set spool aktiv und eine spule erkannt und mqtt meldung das neue spule im ams
+    if (autoSendToBambu && autoSetToBambuSpoolId > 0 && 
+        doc["print"]["command"].as<String>() == "push_status" && doc["print"]["ams"]["tray_pre"].as<uint8_t>()
+        && !doc["print"]["ams"]["ams"].as<JsonArray>())
+    {
+        autoSetSpool(autoSetToBambuSpoolId, doc["print"]["ams"]["tray_pre"].as<uint8_t>());
+    }
+
     // Prüfen, ob "print->upgrade_state" und "print.ams.ams" existieren
-    if (doc["print"]["upgrade_state"].is<String>()) {
+    if (doc["print"]["upgrade_state"].is<JsonObject>()) 
+    {
         // Prüfen ob AMS-Daten vorhanden sind
-        if (!doc["print"]["ams"].is<String>() || !doc["print"]["ams"]["ams"].is<String>()) {
+        if (!doc["print"]["ams"].is<JsonObject>() || !doc["print"]["ams"]["ams"].is<JsonArray>()) 
+        {
             return;
         }
 
@@ -315,7 +383,7 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
         }
 
         // Prüfe die externe Spule
-        if (!hasChanges && doc["print"]["vt_tray"].is<String>()) {
+        if (!hasChanges && doc["print"]["vt_tray"].is<JsonObject>()) {
             JsonObject vtTray = doc["print"]["vt_tray"];
             bool foundExternal = false;
             
@@ -363,7 +431,7 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
         ams_count = amsArray.size();
 
         // Wenn externe Spule vorhanden, füge sie hinzu
-        if (doc["print"]["vt_tray"].is<String>()) {
+        if (doc["print"]["vt_tray"].is<JsonObject>()) {
             JsonObject vtTray = doc["print"]["vt_tray"];
             int extIdx = ams_count;  // Index für externe Spule
             ams_data[extIdx].ams_id = 255;  // Spezielle ID für externe Spule
@@ -374,8 +442,12 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
             ams_data[extIdx].trays[0].tray_color = vtTray["tray_color"].as<String>();
             ams_data[extIdx].trays[0].nozzle_temp_min = vtTray["nozzle_temp_min"].as<int>();
             ams_data[extIdx].trays[0].nozzle_temp_max = vtTray["nozzle_temp_max"].as<int>();
-            ams_data[extIdx].trays[0].setting_id = vtTray["setting_id"].as<String>();
+
-            ams_data[extIdx].trays[0].cali_idx = vtTray["cali_idx"].as<String>();
+            if (doc["print"]["vt_tray"]["tray_type"].as<String>() != "")
+            {
+                ams_data[extIdx].trays[0].setting_id = vtTray["setting_id"].as<String>();
+                ams_data[extIdx].trays[0].cali_idx = vtTray["cali_idx"].as<String>();
+            }
             ams_count++;  // Erhöhe ams_count für die externe Spule
         }
 
@@ -462,7 +534,7 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
 void reconnect() {
     // Loop until we're reconnected
     while (!client.connected()) {
-        Serial.print("Attempting MQTT connection...");
+        Serial.println("Attempting MQTT connection...");
         bambu_connected = false;
         oledShowTopRow();
 

src/bambu.h

@@ -28,9 +28,11 @@ extern bool bambu_connected;
 
 extern int ams_count;
 extern AMSData ams_data[MAX_AMS];
+extern bool autoSendToBambu;
+extern int autoSetToBambuSpoolId;
 
 bool loadBambuCredentials();
-bool saveBambuCredentials(const String& bambu_ip, const String& bambu_serialnr, const String& bambu_accesscode);
+bool saveBambuCredentials(const String& bambu_ip, const String& bambu_serialnr, const String& bambu_accesscode, const bool autoSend);
 bool setupMqtt();
 void mqtt_loop(void * parameter);
 bool setBambuSpool(String payload);

src/config.cpp

@@ -40,6 +40,10 @@ const uint8_t webserverPort = 80;
 const char* apiUrl = "/api/v1";
 // ***** API
 
+// ***** Bambu Auto Set Spool
+uint8_t autoSetBambuAmsCounter = 60;
+// ***** Bambu Auto Set Spool
+
 // ***** Task Prios
 uint8_t rfidTaskCore = 1;
 uint8_t rfidTaskPrio = 1;

src/config.h

@@ -23,6 +23,8 @@ extern const uint8_t OLED_DATA_END;
 extern const char* apiUrl;
 extern const uint8_t webserverPort;
 
+extern uint8_t autoSetBambuAmsCounter;
+
 extern const unsigned char wifi_on[];
 extern const unsigned char wifi_off[];
 extern const unsigned char cloud_on[];

src/display.cpp

@@ -117,7 +117,6 @@ std::vector<String> splitTextIntoLines(String text, uint8_t textSize) {
         lines.push_back(currentLine);
     }
     
-    Serial.println(lines.size());
     return lines;
 }
 

src/main.cpp

@@ -58,7 +58,22 @@ void setup() {
   
   startNfc();
 
-  start_scale();
+  uint8_t scaleCalibrated = start_scale();
+  if (scaleCalibrated == 3) {
+    oledShowMessage("Scale not calibrated!");
+    for (uint16_t i = 0; i < 50000; i++) {
+      yield();
+      vTaskDelay(pdMS_TO_TICKS(1));
+      esp_task_wdt_reset();
+    }
+  } else if (scaleCalibrated == 0) {
+    oledShowMessage("HX711 not found");
+    for (uint16_t i = 0; i < 50000; i++) {
+      yield();
+      vTaskDelay(pdMS_TO_TICKS(1));
+      esp_task_wdt_reset();
+    }
+  }
   
   // WDT initialisieren mit 10 Sekunden Timeout
   bool panic = true; // Wenn true, löst ein WDT-Timeout einen System-Panik aus
@@ -75,6 +90,10 @@ void setup() {
 unsigned long lastWeightReadTime = 0;
 const unsigned long weightReadInterval = 1000; // 1 second
 
+unsigned long lastAutoSetBambuAmsTime = 0;
+const unsigned long autoSetBambuAmsInterval = 1000; // 1 second
+uint8_t autoAmsCounter = 0;
+
 unsigned long lastAmsSendTime = 0;
 const unsigned long amsSendInterval = 60000; // 1 minute
 
@@ -84,33 +103,56 @@ uint8_t wifiErrorCounter = 0;
 
 // ##### PROGRAM START #####
 void loop() {
-
-  /*
-  // Überprüfe den WLAN-Status
-  if (WiFi.status() != WL_CONNECTED) {
-    wifiErrorCounter++;
-    wifiOn = false;
-  } else {
-    wifiErrorCounter = 0;
-    wifiOn = true;
-  }
-  if (wifiErrorCounter > 20) ESP.restart();
-  */
- 
   unsigned long currentMillis = millis();
 
   // Send AMS Data min every Minute
-  if (currentMillis - lastAmsSendTime >= amsSendInterval) {
+  if (currentMillis - lastAmsSendTime >= amsSendInterval) 
+  {
     lastAmsSendTime = currentMillis;
     sendAmsData(nullptr);
   }
 
-  // Ausgabe der Waage auf Display
+  // Wenn Bambu auto set Spool aktiv
-  if (pauseMainTask == 0 && weight != lastWeight && hasReadRfidTag == 0)
+  if (autoSendToBambu && autoSetToBambuSpoolId > 0 && currentMillis - lastAutoSetBambuAmsTime >= autoSetBambuAmsInterval) 
   {
-    (weight < 0) ? oledShowMessage("!! -1") : oledShowWeight(weight);
+    if (hasReadRfidTag == 0)
+    {
+      lastAutoSetBambuAmsTime = currentMillis;
+      oledShowMessage("Auto Set         " + String(autoSetBambuAmsCounter - autoAmsCounter) + "s");
+      autoAmsCounter++;
+
+      if (autoAmsCounter >= autoSetBambuAmsCounter) 
+      {
+        autoSetToBambuSpoolId = 0;
+        autoAmsCounter = 0;
+        oledShowWeight(weight);
+      }
+    }
+    else
+    {
+      autoAmsCounter = 0;
+    }
   }
   
+
+  // Wenn Waage nicht Kalibriert
+  if (scaleCalibrated == 3) 
+  {
+    oledShowMessage("Scale not calibrated!");
+    vTaskDelay(5000 / portTICK_PERIOD_MS);
+    yield();
+    esp_task_wdt_reset();
+    
+    return;
+  } 
+
+  // Ausgabe der Waage auf Display
+  if (pauseMainTask == 0 && weight != lastWeight && hasReadRfidTag == 0 && (!autoSendToBambu || autoSetToBambuSpoolId == 0))
+  {
+    (weight < 2) ? ((weight < -2) ? oledShowMessage("!! -0") : oledShowWeight(0)) : oledShowWeight(weight);
+  }
+
+
   // Wenn Timer abgelaufen und nicht gerade ein RFID-Tag geschrieben wird
   if (currentMillis - lastWeightReadTime >= weightReadInterval && hasReadRfidTag < 3)
   {
@@ -154,6 +196,7 @@ void loop() {
       oledShowIcon("success");
       vTaskDelay(2000 / portTICK_PERIOD_MS);
       weightSend = 1;
+      autoSetToBambuSpoolId = spoolId.toInt();
     }
     else
     {

src/nfc.cpp

@@ -420,7 +420,7 @@ void scanRfidTask(void * parameter) {
         //uidString = "";
         nfcJsonData = "";
         Serial.println("Tag entfernt");
-        oledShowWeight(0);
+        if (!autoSendToBambu) oledShowWeight(weight);
       }
 
       // aktualisieren der Website wenn sich der Status ändert

src/ota.cpp

@@ -0,0 +1,199 @@
+#include <Arduino.h>
+#include <website.h>
+#include <commonFS.h>
+
+// Globale Variablen für Config Backups hinzufügen
+String bambuCredentialsBackup;
+String spoolmanUrlBackup;
+
+// Globale Variable für den Update-Typ
+static int currentUpdateCommand = 0;
+
+// Globale Update-Variablen
+static size_t updateTotalSize = 0;
+static size_t updateWritten = 0;
+static bool isSpiffsUpdate = false;
+
+
+void backupJsonConfigs() {
+    // Bambu Credentials backup
+    if (SPIFFS.exists("/bambu_credentials.json")) {
+        File file = SPIFFS.open("/bambu_credentials.json", "r");
+        if (file) {
+            bambuCredentialsBackup = file.readString();
+            file.close();
+            Serial.println("Bambu credentials backed up");
+        }
+    }
+
+    // Spoolman URL backup
+    if (SPIFFS.exists("/spoolman_url.json")) {
+        File file = SPIFFS.open("/spoolman_url.json", "r");
+        if (file) {
+            spoolmanUrlBackup = file.readString();
+            file.close();
+            Serial.println("Spoolman URL backed up");
+        }
+    }
+}
+
+void restoreJsonConfigs() {
+    // Restore Bambu credentials
+    if (bambuCredentialsBackup.length() > 0) {
+        File file = SPIFFS.open("/bambu_credentials.json", "w");
+        if (file) {
+            file.print(bambuCredentialsBackup);
+            file.close();
+            Serial.println("Bambu credentials restored");
+        }
+        bambuCredentialsBackup = ""; // Clear backup
+    }
+
+    // Restore Spoolman URL
+    if (spoolmanUrlBackup.length() > 0) {
+        File file = SPIFFS.open("/spoolman_url.json", "w");
+        if (file) {
+            file.print(spoolmanUrlBackup);
+            file.close();
+            Serial.println("Spoolman URL restored");
+        }
+        spoolmanUrlBackup = ""; // Clear backup
+    }
+}
+
+void espRestart() {
+    yield();
+    vTaskDelay(5000 / portTICK_PERIOD_MS);
+
+    ESP.restart();
+}
+
+
+void sendUpdateProgress(int progress, const char* status = nullptr, const char* message = nullptr) {
+    static int lastSentProgress = -1;
+    
+    // Verhindere zu häufige Updates
+    if (progress == lastSentProgress && !status && !message) {
+        return;
+    }
+    
+    String progressMsg = "{\"type\":\"updateProgress\",\"progress\":" + String(progress);
+    if (status) {
+        progressMsg += ",\"status\":\"" + String(status) + "\"";
+    }
+    if (message) {
+        progressMsg += ",\"message\":\"" + String(message) + "\"";
+    }
+    progressMsg += "}";
+    
+    // Sende die Nachricht mehrmals mit Verzögerung für wichtige Updates
+    if (status || abs(progress - lastSentProgress) >= 10 || progress == 100) {
+        for (int i = 0; i < 2; i++) {
+            ws.textAll(progressMsg);
+            delay(100);  // Längerer Delay zwischen Nachrichten
+        }
+    } else {
+        ws.textAll(progressMsg);
+        delay(50);
+    }
+    
+    lastSentProgress = progress;
+}
+
+void handleUpdate(AsyncWebServer &server) {
+    AsyncCallbackWebHandler* updateHandler = new AsyncCallbackWebHandler();
+    updateHandler->setUri("/update");
+    updateHandler->setMethod(HTTP_POST);
+    
+    updateHandler->onUpload([](AsyncWebServerRequest *request, String filename,
+                             size_t index, uint8_t *data, size_t len, bool final) {
+        if (!index) {
+            updateTotalSize = request->contentLength();
+            updateWritten = 0;
+            isSpiffsUpdate = (filename.indexOf("website") > -1);
+            
+            if (isSpiffsUpdate) {
+                // Backup vor dem Update
+                sendUpdateProgress(0, "backup", "Backing up configurations...");
+                delay(200);
+                backupJsonConfigs();
+                delay(200);
+                
+                const esp_partition_t *partition = esp_partition_find_first(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_DATA_SPIFFS, NULL);
+                if (!partition || !Update.begin(partition->size, U_SPIFFS)) {
+                    request->send(400, "application/json", "{\"success\":false,\"message\":\"Update initialization failed\"}");
+                    return;
+                }
+                sendUpdateProgress(5, "starting", "Starting SPIFFS update...");
+                delay(200);
+            } else {
+                if (!Update.begin(updateTotalSize)) {
+                    request->send(400, "application/json", "{\"success\":false,\"message\":\"Update initialization failed\"}");
+                    return;
+                }
+                sendUpdateProgress(0, "starting", "Starting firmware update...");
+                delay(200);
+            }
+        }
+
+        if (len) {
+            if (Update.write(data, len) != len) {
+                request->send(400, "application/json", "{\"success\":false,\"message\":\"Write failed\"}");
+                return;
+            }
+            
+            updateWritten += len;
+            int currentProgress;
+            
+            // Berechne den Fortschritt basierend auf dem Update-Typ
+            if (isSpiffsUpdate) {
+                // SPIFFS: 5-75% für Upload
+                currentProgress = 5 + (updateWritten * 100) / updateTotalSize;
+            } else {
+                // Firmware: 0-100% für Upload
+                currentProgress = 1 + (updateWritten * 100) / updateTotalSize;
+            }
+            
+            static int lastProgress = -1;
+            if (currentProgress != lastProgress && (currentProgress % 10 == 0 || final)) {
+                sendUpdateProgress(currentProgress, "uploading");
+                oledShowMessage("Update: " + String(currentProgress) + "%");
+                delay(50);
+                lastProgress = currentProgress;
+            }
+        }
+
+        if (final) {
+            if (Update.end(true)) {
+                if (isSpiffsUpdate) {
+                    restoreJsonConfigs();
+                }
+            } else {
+                request->send(400, "application/json", "{\"success\":false,\"message\":\"Update finalization failed\"}");
+            }
+        }
+    });
+
+    updateHandler->onRequest([](AsyncWebServerRequest *request) {
+        if (Update.hasError()) {
+            request->send(400, "application/json", "{\"success\":false,\"message\":\"Update failed\"}");
+            return;
+        }
+
+        // Erste 100% Nachricht
+        ws.textAll("{\"type\":\"updateProgress\",\"progress\":100,\"status\":\"success\",\"message\":\"Update successful! Restarting device...\"}");
+        vTaskDelay(2000 / portTICK_PERIOD_MS);
+        
+        AsyncWebServerResponse *response = request->beginResponse(200, "application/json", 
+            "{\"success\":true,\"message\":\"Update successful! Restarting device...\"}");
+        response->addHeader("Connection", "close");
+        request->send(response);
+        
+        // Zweite 100% Nachricht zur Sicherheit
+        ws.textAll("{\"type\":\"updateProgress\",\"progress\":100,\"status\":\"success\",\"message\":\"Update successful! Restarting device...\"}");
+        
+        espRestart();
+    });
+
+    server.addHandler(updateHandler);
+}

src/ota.h

@@ -0,0 +1,9 @@
+#ifndef OTA_H
+#define OTA_H
+
+#include <ArduinoOTA.h>
+#include <ESPAsyncWebServer.h>
+
+void handleUpdate(AsyncWebServer &server);
+
+#endif

src/scale.cpp

@@ -16,6 +16,7 @@ int16_t weight = 0;
 uint8_t weigthCouterToApi = 0;
 uint8_t scale_tare_counter = 0;
 uint8_t pauseMainTask = 0;
+uint8_t scaleCalibrated = 1;
 
 Preferences preferences;
 const char* NVS_NAMESPACE = "scale";
@@ -50,11 +51,11 @@ void scale_loop(void * parameter) {
   }
 }
 
-void start_scale() {
+uint8_t start_scale() {
   Serial.println("Prüfe Calibration Value");
   long calibrationValue;
 
-  // NVS
+  // NVS lesen
   preferences.begin(NVS_NAMESPACE, true); // true = readonly
   calibrationValue = preferences.getLong(NVS_KEY_CALIBRATION, defaultScaleCalibrationValue);
   preferences.end();
@@ -64,7 +65,10 @@ void start_scale() {
 
   scale.begin(LOADCELL_DOUT_PIN, LOADCELL_SCK_PIN);
 
-  if (isnan(calibrationValue) || calibrationValue < 1) calibrationValue = defaultScaleCalibrationValue;
+  if (isnan(calibrationValue) || calibrationValue < 1) {
+    calibrationValue = defaultScaleCalibrationValue;
+    scaleCalibrated = 0;
+  }
 
   oledShowMessage("Scale Tare Please remove all");
   for (uint16_t i = 0; i < 2000; i++) {
@@ -97,6 +101,8 @@ void start_scale() {
   } else {
       Serial.println("ScaleLoop-Task erfolgreich erstellt");
   }
+
+  return (scaleCalibrated == 1) ? 1 : 3;
 }
 
 uint8_t calibrate_scale() {

src/scale.h

@@ -5,7 +5,7 @@
 #include "HX711.h"
 
 
-void start_scale();
+uint8_t start_scale();
 uint8_t calibrate_scale();
 uint8_t tareScale();
 
@@ -14,6 +14,7 @@ extern int16_t weight;
 extern uint8_t weigthCouterToApi;
 extern uint8_t scale_tare_counter;
 extern uint8_t pauseMainTask;
+extern uint8_t scaleCalibrated;
 
 extern TaskHandle_t ScaleTask;
 

src/website.cpp

@@ -9,6 +9,7 @@
 #include "esp_task_wdt.h"
 #include <Update.h>
 #include "display.h"
+#include "ota.h"
 
 #ifndef VERSION
   #define VERSION "1.1.0"
@@ -23,48 +24,6 @@ AsyncWebSocket ws("/ws");
 uint8_t lastSuccess = 0;
 uint8_t lastHasReadRfidTag = 0;
 
-// Globale Variablen für Config Backups hinzufügen
-String bambuCredentialsBackup;
-String spoolmanUrlBackup;
-
-// Globale Variable für den Update-Typ
-static int currentUpdateCommand = 0;
-
-// Globale Update-Variablen
-static size_t updateTotalSize = 0;
-static size_t updateWritten = 0;
-static bool isSpiffsUpdate = false;
-
-void sendUpdateProgress(int progress, const char* status = nullptr, const char* message = nullptr) {
-    static int lastSentProgress = -1;
-    
-    // Verhindere zu häufige Updates
-    if (progress == lastSentProgress && !status && !message) {
-        return;
-    }
-    
-    String progressMsg = "{\"type\":\"updateProgress\",\"progress\":" + String(progress);
-    if (status) {
-        progressMsg += ",\"status\":\"" + String(status) + "\"";
-    }
-    if (message) {
-        progressMsg += ",\"message\":\"" + String(message) + "\"";
-    }
-    progressMsg += "}";
-    
-    // Sende die Nachricht mehrmals mit Verzögerung für wichtige Updates
-    if (status || abs(progress - lastSentProgress) >= 10 || progress == 100) {
-        for (int i = 0; i < 2; i++) {
-            ws.textAll(progressMsg);
-            delay(100);  // Längerer Delay zwischen Nachrichten
-        }
-    } else {
-        ws.textAll(progressMsg);
-        delay(50);
-    }
-    
-    lastSentProgress = progress;
-}
 
 void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventType type, void *arg, uint8_t *data, size_t len) {
     if (type == WS_EVT_CONNECT) {
@@ -96,7 +55,7 @@ void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventTyp
         }
 
         else if (doc["type"] == "writeNfcTag") {
-            if (doc["payload"].is<String>()) {
+            if (doc["payload"].is<JsonObject>()) {
                 // Versuche NFC-Daten zu schreiben
                 String payloadString;
                 serializeJson(doc["payload"], payloadString);
@@ -207,105 +166,6 @@ void sendAmsData(AsyncWebSocketClient *client) {
     }
 }
 
-void handleUpdate(AsyncWebServer &server) {
-    AsyncCallbackWebHandler* updateHandler = new AsyncCallbackWebHandler();
-    updateHandler->setUri("/update");
-    updateHandler->setMethod(HTTP_POST);
-    
-    updateHandler->onUpload([](AsyncWebServerRequest *request, String filename,
-                             size_t index, uint8_t *data, size_t len, bool final) {
-        if (!index) {
-            updateTotalSize = request->contentLength();
-            updateWritten = 0;
-            isSpiffsUpdate = (filename.indexOf("website") > -1);
-            
-            if (isSpiffsUpdate) {
-                // Backup vor dem Update
-                sendUpdateProgress(0, "backup", "Backing up configurations...");
-                delay(200);
-                backupJsonConfigs();
-                delay(200);
-                
-                const esp_partition_t *partition = esp_partition_find_first(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_DATA_SPIFFS, NULL);
-                if (!partition || !Update.begin(partition->size, U_SPIFFS)) {
-                    request->send(400, "application/json", "{\"success\":false,\"message\":\"Update initialization failed\"}");
-                    return;
-                }
-                sendUpdateProgress(5, "starting", "Starting SPIFFS update...");
-                delay(200);
-            } else {
-                if (!Update.begin(updateTotalSize)) {
-                    request->send(400, "application/json", "{\"success\":false,\"message\":\"Update initialization failed\"}");
-                    return;
-                }
-                sendUpdateProgress(0, "starting", "Starting firmware update...");
-                delay(200);
-            }
-        }
-
-        if (len) {
-            if (Update.write(data, len) != len) {
-                request->send(400, "application/json", "{\"success\":false,\"message\":\"Write failed\"}");
-                return;
-            }
-            
-            updateWritten += len;
-            int currentProgress;
-            
-            // Berechne den Fortschritt basierend auf dem Update-Typ
-            if (isSpiffsUpdate) {
-                // SPIFFS: 5-75% für Upload
-                currentProgress = 5 + (updateWritten * 100) / updateTotalSize;
-            } else {
-                // Firmware: 0-100% für Upload
-                currentProgress = 1 + (updateWritten * 100) / updateTotalSize;
-            }
-            
-            static int lastProgress = -1;
-            if (currentProgress != lastProgress && (currentProgress % 10 == 0 || final)) {
-                sendUpdateProgress(currentProgress, "uploading");
-                oledShowMessage("Update: " + String(currentProgress) + "%");
-                delay(50);
-                lastProgress = currentProgress;
-            }
-        }
-
-        if (final) {
-            if (Update.end(true)) {
-                if (isSpiffsUpdate) {
-                    restoreJsonConfigs();
-                }
-            } else {
-                request->send(400, "application/json", "{\"success\":false,\"message\":\"Update finalization failed\"}");
-            }
-        }
-    });
-
-    updateHandler->onRequest([](AsyncWebServerRequest *request) {
-        if (Update.hasError()) {
-            request->send(400, "application/json", "{\"success\":false,\"message\":\"Update failed\"}");
-            return;
-        }
-
-        // Erste 100% Nachricht
-        ws.textAll("{\"type\":\"updateProgress\",\"progress\":100,\"status\":\"success\",\"message\":\"Update successful! Restarting device...\"}");
-        delay(2000);  // Längerer Delay für die erste Nachricht
-        
-        AsyncWebServerResponse *response = request->beginResponse(200, "application/json", 
-            "{\"success\":true,\"message\":\"Update successful! Restarting device...\"}");
-        response->addHeader("Connection", "close");
-        request->send(response);
-        
-        // Zweite 100% Nachricht zur Sicherheit
-        ws.textAll("{\"type\":\"updateProgress\",\"progress\":100,\"status\":\"success\",\"message\":\"Update successful! Restarting device...\"}");
-        delay(3000);  // Noch längerer Delay vor dem Neustart
-        
-        ESP.restart();
-    });
-
-    server.addHandler(updateHandler);
-}
-
 void setupWebserver(AsyncWebServer &server) {
     // Deaktiviere alle Debug-Ausgaben
     Serial.setDebugOutput(false);
@@ -351,17 +211,6 @@ void setupWebserver(AsyncWebServer &server) {
         Serial.println("RFID-Seite gesendet");
     });
 
-    /*
-    // Neue API-Route für das Abrufen der Spool-Daten
-    server.on("/api/spools", HTTP_GET, [](AsyncWebServerRequest *request){
-        Serial.println("API-Aufruf: /api/spools");
-        JsonDocument spoolsData = fetchSpoolsForWebsite();
-        String response;
-        serializeJson(spoolsData, response);
-        request->send(200, "application/json", response);
-    });
-    */
-
     server.on("/api/url", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("API-Aufruf: /api/url");
         String jsonResponse = "{\"spoolman_url\": \"" + String(spoolmanUrl) + "\"}";
@@ -384,10 +233,12 @@ void setupWebserver(AsyncWebServer &server) {
         html.replace("{{spoolmanUrl}}", spoolmanUrl);
 
         JsonDocument doc;
-        if (loadJsonValue("/bambu_credentials.json", doc) && doc["bambu_ip"].is<String>()) {
+        if (loadJsonValue("/bambu_credentials.json", doc) && doc["bambu_ip"].is<String>()) 
+        {
             String bambuIp = doc["bambu_ip"].as<String>();
             String bambuSerial = doc["bambu_serialnr"].as<String>();
             String bambuCode = doc["bambu_accesscode"].as<String>();
+            autoSendToBambu = doc["autoSendToBambu"].as<bool>();
             bambuIp.trim();
             bambuSerial.trim();
             bambuCode.trim();
@@ -395,6 +246,14 @@ void setupWebserver(AsyncWebServer &server) {
             html.replace("{{bambuIp}}", bambuIp ? bambuIp : "");            
             html.replace("{{bambuSerial}}", bambuSerial ? bambuSerial : "");
             html.replace("{{bambuCode}}", bambuCode ? bambuCode : "");
+            html.replace("{{autoSendToBambu}}", autoSendToBambu ? "checked" : "");
+        }
+        else
+        {
+            html.replace("{{bambuIp}}", "");
+            html.replace("{{bambuSerial}}", "");
+            html.replace("{{bambuCode}}", "");
+            html.replace("{{autoSendToBambu}}", "");
         }
 
         request->send(200, "text/html", html);
@@ -426,16 +285,20 @@ void setupWebserver(AsyncWebServer &server) {
         String bambu_ip = request->getParam("bambu_ip")->value();
         String bambu_serialnr = request->getParam("bambu_serialnr")->value();
         String bambu_accesscode = request->getParam("bambu_accesscode")->value();
+        bool autoSend = (request->getParam("autoSend")->value() == "true") ? true : false;
+        String autoSendTime = request->getParam("autoSendTime")->value();
+        Serial.println(autoSend);
         bambu_ip.trim();
         bambu_serialnr.trim();
         bambu_accesscode.trim();
+        autoSendTime.trim();
 
         if (bambu_ip.length() == 0 || bambu_serialnr.length() == 0 || bambu_accesscode.length() == 0) {
             request->send(400, "application/json", "{\"success\": false, \"error\": \"Empty parameter\"}");
             return;
         }
 
-        bool success = saveBambuCredentials(bambu_ip, bambu_serialnr, bambu_accesscode);
+        bool success = saveBambuCredentials(bambu_ip, bambu_serialnr, bambu_accesscode, autoSend, autoSendTime);
 
         request->send(200, "application/json", "{\"healthy\": " + String(success ? "true" : "false") + "}");
     });
@@ -533,50 +396,3 @@ void setupWebserver(AsyncWebServer &server) {
     server.begin();
     Serial.println("Webserver gestartet");
 }
-
-
-void backupJsonConfigs() {
-    // Bambu Credentials backup
-    if (SPIFFS.exists("/bambu_credentials.json")) {
-        File file = SPIFFS.open("/bambu_credentials.json", "r");
-        if (file) {
-            bambuCredentialsBackup = file.readString();
-            file.close();
-            Serial.println("Bambu credentials backed up");
-        }
-    }
-
-    // Spoolman URL backup
-    if (SPIFFS.exists("/spoolman_url.json")) {
-        File file = SPIFFS.open("/spoolman_url.json", "r");
-        if (file) {
-            spoolmanUrlBackup = file.readString();
-            file.close();
-            Serial.println("Spoolman URL backed up");
-        }
-    }
-}
-
-void restoreJsonConfigs() {
-    // Restore Bambu credentials
-    if (bambuCredentialsBackup.length() > 0) {
-        File file = SPIFFS.open("/bambu_credentials.json", "w");
-        if (file) {
-            file.print(bambuCredentialsBackup);
-            file.close();
-            Serial.println("Bambu credentials restored");
-        }
-        bambuCredentialsBackup = ""; // Clear backup
-    }
-
-    // Restore Spoolman URL
-    if (spoolmanUrlBackup.length() > 0) {
-        File file = SPIFFS.open("/spoolman_url.json", "w");
-        if (file) {
-            file.print(spoolmanUrlBackup);
-            file.close();
-            Serial.println("Spoolman URL restored");
-        }
-        spoolmanUrlBackup = ""; // Clear backup
-    }
-}

src/website.h

@@ -19,7 +19,6 @@ extern AsyncWebSocket ws;
 
 // Server-Initialisierung und Handler
 void initWebServer();
-void handleUpload(AsyncWebServerRequest *request, String filename, size_t index, uint8_t *data, size_t len, bool final);
 void handleBody(AsyncWebServerRequest *request, uint8_t *data, size_t len, size_t index, size_t total);
 void setupWebserver(AsyncWebServer &server);
 
@@ -29,8 +28,4 @@ void sendNfcData(AsyncWebSocketClient *client);
 void foundNfcTag(AsyncWebSocketClient *client, uint8_t success);
 void sendWriteResult(AsyncWebSocketClient *client, uint8_t success);
 
-// Upgrade-Funktionen
-void backupJsonConfigs();
-void restoreJsonConfigs();
-
 #endif