docs: update changelog for version 1.3.56

.github/workflows/gitea-release.yml

@@ -40,8 +40,8 @@ jobs:
         # Copy firmware binary
         cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/upgrade_filaman_firmware_v${VERSION}.bin
         
-        # Create SPIFFS binary with minimal header
+        # Create SPIFFS binary - direct copy without header
-        ( printf '\xe9\x01\x00\x00' && cat .pio/build/esp32dev/spiffs.bin ) > .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
+        cp .pio/build/esp32dev/spiffs.bin .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
         
         # Create full binary
         (cd .pio/build/esp32dev && 

.github/workflows/github-release.yml

@@ -47,8 +47,8 @@ jobs:
         # Copy firmware binary
         cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/upgrade_filaman_firmware_v${VERSION}.bin
         
-        # Create SPIFFS binary with minimal header
+        # Create SPIFFS binary - direct copy without header
-        ( printf '\xe9\x01\x00\x00' && cat .pio/build/esp32dev/spiffs.bin ) > .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
+        cp .pio/build/esp32dev/spiffs.bin .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
         
         # Create full binary (always)
         (cd .pio/build/esp32dev && 

CHANGELOG.md

@@ -1,5 +1,66 @@
 # Changelog
 
+## [1.3.56] - 2025-02-22
+### Changed
+- update webpages for version v1.3.56
+- update header title and improve SPIFFS update error handling
+- clarify comments in Gitea and GitHub release workflows
+
+
+## [1.3.55] - 2025-02-22
+### Changed
+- update webpages for version v1.3.55
+- update component descriptions in README files
+
+
+## [1.3.54] - 2025-02-22
+### Changed
+- update webpages for version v1.3.54
+- workflow: update SPIFFS binary creation to exclude header
+
+
+## [1.3.53] - 2025-02-22
+### Changed
+- version: update to version 1.3.53
+- update changelog for version 1.3.51
+- update changelog for version 1.3.51
+- workflow: update SPIFFS binary magic byte and revert version to 1.3.51
+
+
+## [1.3.52] - 2025-02-22
+### Changed
+- update webpages for version v1.3.52
+- workflow: update SPIFFS binary creation to use correct chip revision (0xEB for Rev 3)
+
+
+## [1.3.51] - 2025-02-22
+### Changed
+- update changelog for version 1.3.51
+- workflow: update SPIFFS binary magic byte and revert version to 1.3.51
+
+## [1.3.50] - 2025-02-22
+### Changed
+- update webpages for version v1.3.50
+
+
+## [1.3.49] - 2025-02-22
+### Changed
+- update webpages for version v1.3.49
+- workflow: update SPIFFS binary header to use correct chip revision
+
+
+## [1.3.48] - 2025-02-22
+### Changed
+- update webpages for version v1.3.48
+- workflow: update SPIFFS binary header for firmware release
+
+
+## [1.3.47] - 2025-02-22
+### Changed
+- update webpages for version v1.3.47
+- workflow: optimize firmware and SPIFFS update process, improve progress handling and logging
+
+
 ## [1.3.46] - 2025-02-22
 ### Changed
 - update webpages for version v1.3.46

README.de.md

@@ -53,14 +53,14 @@ Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaO
 ### Komponenten
 - **ESP32 Entwicklungsboard:** Jede ESP32-Variante.
 [Amazon Link](https://amzn.eu/d/aXThslf)
-- **HX711 Wägezellen-Verstärker:** Für Gewichtsmessung.
+- **HX711 5kg Wägezellen-Verstärker:** Für Gewichtsmessung.
-[Amazon Link](https://amzn.eu/d/1wZ4v0x)
+[Amazon Link](https://amzn.eu/d/06A0DLb)
-- **OLED Display:** 128x64 SSD1306.
+- **OLED 0.96 Zoll I2C weiß/gelb Display:** 128x64 SSD1306.
-[Amazon Link](https://amzn.eu/d/dozAYDU)
+[Amazon Link](https://amzn.eu/d/0AuBp2c)
-- **PN532 NFC Modul:** Für NFC-Tag-Operationen.
+- **PN532 NFC NXP RFID-Modul V3:** Für NFC-Tag-Operationen.
-[Amazon Link](https://amzn.eu/d/8205DDh)
+[Amazon Link](https://amzn.eu/d/jfIuQXb)
-- **NFC-Tag:** NTAG215
+- **NFC Tags Ntag215:** RFID Tag
-[Amazon Link](https://amzn.eu/d/fywy4c4)
+[Amazon Link](https://amzn.eu/d/9Z6mXc1)
 
 ### Pin-Konfiguration
 | Komponente        | ESP32 Pin |

README.md

@@ -56,14 +56,14 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
 ### Components
 - **ESP32 Development Board:** Any ESP32 variant.
 [Amazon Link](https://amzn.eu/d/aXThslf)
-- **HX711 Load Cell Amplifier:** For weight measurement.
+- **HX711 5kg Load Cell Amplifier:** For weight measurement.
-[Amazon Link](https://amzn.eu/d/1wZ4v0x)
+[Amazon Link](https://amzn.eu/d/06A0DLb)
-- **OLED Display:** 128x64 SSD1306.
+- **OLED 0.96 Zoll I2C white/yellow Display:** 128x64 SSD1306.
-[Amazon Link](https://amzn.eu/d/dozAYDU)
+[Amazon Link](https://amzn.eu/d/0AuBp2c)
-- **PN532 NFC Module:** For NFC tag operations.
+- **PN532 NFC NXP RFID-Modul V3:** For NFC tag operations.
-[Amazon Link](https://amzn.eu/d/8205DDh)
+[Amazon Link](https://amzn.eu/d/jfIuQXb)
-- **NFC-Tag:** NTAG215
+- **NFC Tags Ntag215:** RFID Tag
-[Amazon Link](https://amzn.eu/d/fywy4c4)
+[Amazon Link](https://amzn.eu/d/9Z6mXc1)
 
 
 ### Pin Configuration

html/header.html

@@ -24,7 +24,7 @@
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
                 <h1>FilaMan<span class="version"></span></h1>
-                <h4>Hollo Lollo Trollo</h4>
+                <h4>Filament Management Tool</h4>
             </div>
         </div>
         <nav style="display: flex; gap: 1rem;">

html/index.html

@@ -24,7 +24,7 @@
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
                 <h1>FilaMan<span class="version"></span></h1>
-                <h4>Filament Management Tool</h4>
+                <h4>Hollo Lollo Trollo</h4>
             </div>
         </div>
         <nav style="display: flex; gap: 1rem;">

html/rfid.html

@@ -24,7 +24,7 @@
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
                 <h1>FilaMan<span class="version"></span></h1>
-                <h4>Filament Management Tool</h4>
+                <h4>Hollo Lollo Trollo</h4>
             </div>
         </div>
         <nav style="display: flex; gap: 1rem;">

html/spoolman.html

@@ -24,7 +24,7 @@
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
                 <h1>FilaMan<span class="version"></span></h1>
-                <h4>Filament Management Tool</h4>
+                <h4>Hollo Lollo Trollo</h4>
             </div>
         </div>
         <nav style="display: flex; gap: 1rem;">

html/upgrade.html

@@ -24,7 +24,7 @@
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
                 <h1>FilaMan<span class="version"></span></h1>
-                <h4>Filament Management Tool</h4>
+                <h4>Hollo Lollo Trollo</h4>
             </div>
         </div>
         <nav style="display: flex; gap: 1rem;">
@@ -189,13 +189,6 @@
 
             const xhr = new XMLHttpRequest();
             xhr.open('POST', '/update', true);
-            xhr.upload.onprogress = (e) => {
-                if (e.lengthComputable) {
-                    const percentComplete = (e.loaded / e.total) * 100;
-                    progress.style.width = percentComplete + '%';
-                    progress.textContent = Math.round(percentComplete) + '%';
-                }
-            };
 
             xhr.onload = function() {
                 try {
@@ -203,41 +196,27 @@
                     try {
                         const jsonResponse = JSON.parse(response);
                         
-                        // Handle progress updates
+                        // Zeige finale Nachricht
-                        if (jsonResponse.progress !== undefined) {
+                        status.textContent = jsonResponse.message || "Update complete";
-                            const percent = jsonResponse.progress;
+                        status.classList.add(jsonResponse.success ? 'success' : 'error');
-                            progress.style.width = percent + '%';
+                        status.style.display = 'block';
-                            progress.textContent = Math.round(percent) + '%';
-                            return;
-                        }
                         
-                        // Handle success/error messages
+                        if (jsonResponse.success) {
-                        response = jsonResponse.message;
+                            progress.style.width = '100%';
+                            progress.textContent = '100%';
                             
-                        if (jsonResponse.restart) {
+                            // Automatischer Neustart nach erfolgreicher Aktualisierung
-                            status.textContent = response + " Redirecting in 20 seconds...";
+                            status.textContent = "Update successful! Restarting device...";
-                            let countdown = 20;
+                            setTimeout(() => {
-                            const timer = setInterval(() => {
+                                window.location.reload();
-                                countdown--;
+                            }, 5000);
-                                if (countdown <= 0) {
+                        } else {
-                                    clearInterval(timer);
+                            document.querySelectorAll('form input[type=submit]').forEach(btn => btn.disabled = false);
-                                    window.location.href = '/';
-                                } else {
-                                    status.textContent = response + ` Redirecting in ${countdown} seconds...`;
-                                }
-                            }, 1000);
                         }
                     } catch (e) {
                         console.error('JSON parse error:', e);
                         status.textContent = 'Update failed: Invalid response from server';
                         status.classList.add('error');
-                    }
-                    
-                    status.textContent = response;
-                    status.classList.add(xhr.status === 200 ? 'success' : 'error');
-                    status.style.display = 'block';
-                    
-                    if (xhr.status !== 200) {
                         document.querySelectorAll('form input[type=submit]').forEach(btn => btn.disabled = false);
                     }
                 } catch (error) {

html/waage.html

@@ -24,7 +24,7 @@
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
                 <h1>FilaMan<span class="version"></span></h1>
-                <h4>Filament Management Tool</h4>
+                <h4>Hollo Lollo Trollo</h4>
             </div>
         </div>
         <nav style="display: flex; gap: 1rem;">

html/wifi.html

@@ -24,7 +24,7 @@
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
                 <h1>FilaMan<span class="version"></span></h1>
-                <h4>Filament Management Tool</h4>
+                <h4>Hollo Lollo Trollo</h4>
             </div>
         </div>
         <nav style="display: flex; gap: 1rem;">

platformio.ini

@@ -9,7 +9,7 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [common]
-version = "1.3.46"
+version = "1.3.56"
 
 #test
 

src/website.cpp

@@ -165,6 +165,9 @@ void sendAmsData(AsyncWebSocketClient *client) {
 }
 
 void setupWebserver(AsyncWebServer &server) {
+    // Deaktiviere alle Debug-Ausgaben
+    Serial.setDebugOutput(false);
+    
     // WebSocket-Optimierungen
     ws.onEvent(onWsEvent);
     ws.enable(true);
@@ -390,29 +393,34 @@ void setupWebserver(AsyncWebServer &server) {
             static size_t updateSize = 0;
             static int command = 0;
 
-            oledShowMessage("Upgrade please wait");
+            //oledShowMessage("Upgrade please wait");
 
             if (!index) {
                 updateSize = request->contentLength();
-                command = (filename.indexOf("spiffs") > -1) ? U_SPIFFS : U_FLASH;
+                command = (filename.indexOf("website") > -1) ? U_SPIFFS : U_FLASH;
-                Serial.printf("Update Start: %s\nSize: %u\nCommand: %d\n", filename.c_str(), updateSize, command);
                 
                 if (command == U_SPIFFS) {
-                    Serial.println("Backup JSON configs...");
+                    oledShowMessage("SPIFFS Update...");
                     backupJsonConfigs();
                     
-                    // Deaktiviere alle Validierungen für SPIFFS-Updates
+                    // Get the actual SPIFFS partition size from ESP32
-                    if (!Update.begin(UPDATE_SIZE_UNKNOWN, command)) {
+                    const esp_partition_t *partition = esp_partition_find_first(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_DATA_SPIFFS, NULL);
-                        Serial.printf("Update Begin Error: %s\n", Update.errorString());
+                    if (!partition) {
+                        restoreJsonConfigs();
+                        String errorMsg = "SPIFFS partition not found";
+                        request->send(400, "application/json", "{\"success\":false,\"message\":\"" + errorMsg + "\"}");
+                        return;
+                    }
+                    
+                    if (!Update.begin(partition->size, command)) {
                         restoreJsonConfigs();
                         String errorMsg = String("Update begin failed: ") + Update.errorString();
                         request->send(400, "application/json", "{\"success\":false,\"message\":\"" + errorMsg + "\"}");
                         return;
                     }
                 } else {
-                    // Normale Validierung für Firmware-Updates
+                    oledShowMessage("Firmware Update...");
                     if (!Update.begin(updateSize, command)) {
-                        Serial.printf("Update Begin Error: %s\n", Update.errorString());
                         String errorMsg = String("Update begin failed: ") + Update.errorString();
                         request->send(400, "application/json", "{\"success\":false,\"message\":\"" + errorMsg + "\"}");
                         return;
@@ -422,7 +430,6 @@ void setupWebserver(AsyncWebServer &server) {
 
             if (len) {
                 if (Update.write(data, len) != len) {
-                    Serial.printf("Update Write Error: %s\n", Update.errorString());
                     if (command == U_SPIFFS) {
                         restoreJsonConfigs();
                     }
@@ -431,23 +438,24 @@ void setupWebserver(AsyncWebServer &server) {
                     return;
                 }
                 
-                // Sende den Fortschritt als JSON
+                // Update OLED Display alle 25%
-                String progress = "{\"progress\":" + String((index + len) * 100 / updateSize) + "}";
+                static int lastProgress = -1;
-                request->send(200, "application/json", progress);
+                int currentProgress = (index + len) * 100 / updateSize;
+                if (currentProgress % 25 == 0 && currentProgress != lastProgress) {
+                    lastProgress = currentProgress;
+                    oledShowMessage(String(currentProgress) + "% complete");
+                }
             }
 
             if (final) {
                 if (!Update.end(true)) {
-                    Serial.printf("Update End Error: %s\n", Update.errorString());
                     if (command == U_SPIFFS) {
-                        Serial.println("Restoring JSON configs...");
                         restoreJsonConfigs();
                     }
                     String errorMsg = String("Update end failed: ") + Update.errorString();
                     request->send(400, "application/json", "{\"success\":false,\"message\":\"" + errorMsg + "\"}");
                     return;
                 }
-                Serial.println("Update Success!");
             }
         }
     );