docs: update changelog and header for version v1.3.86

.github/workflows/gitea-release.yml

@@ -0,0 +1,232 @@
+name: Gitea Release
+
+on:
+  workflow_call:
+    secrets:
+      GITEA_TOKEN:
+        description: 'Token für Gitea API-Zugriff'
+        required: true
+      FTP_PASSWORD:
+        description: 'FTP Password for firmware upload'
+        required: true
+      FTP_USER:
+        description: 'FTP User for firmware upload'
+        required: true
+      FTP_HOST:
+        description: 'FTP Host for firmware upload'
+        required: true
+
+jobs:
+  create-release:
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/checkout@v4
+      with:
+        fetch-depth: 0
+    
+    - name: Set up Python
+      uses: actions/setup-python@v4
+      with:
+        python-version: '3.x'
+    
+    - name: Install PlatformIO
+      run: |
+        python -m pip install --upgrade pip
+        pip install --upgrade platformio esptool
+    
+    - name: Install xxd
+      run: |
+        sudo apt-get update
+        sudo apt-get install xxd
+    
+    - name: Build Firmware
+      run: |
+        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
+        
+        # Build firmware and SPIFFS
+        echo "Building firmware and SPIFFS..."
+        pio run -e esp32dev
+        pio run -t buildfs
+        
+        # Copy firmware binary
+        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/upgrade_filaman_firmware_v${VERSION}.bin
+        
+        # Create SPIFFS binary - direct copy without header
+        cp .pio/build/esp32dev/spiffs.bin .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
+        
+        # Create full binary
+        (cd .pio/build/esp32dev && 
+        esptool.py --chip esp32 merge_bin \
+          --fill-flash-size 4MB \
+          --flash_mode dio \
+          --flash_freq 40m \
+          --flash_size 4MB \
+          -o filaman_full_${VERSION}.bin \
+          0x1000 bootloader.bin \
+          0x8000 partitions.bin \
+          0x10000 firmware.bin \
+          0x3D0000 spiffs.bin)
+        
+        # Verify file sizes
+        echo "File sizes:"
+        (cd .pio/build/esp32dev && ls -lh *.bin)
+    
+    - name: Get version from platformio.ini
+      id: get_version
+      run: |
+        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
+        echo "VERSION=$VERSION" >> $GITHUB_OUTPUT
+      
+    - name: Generate Release Notes
+      id: release_notes
+      run: |
+        # Get the latest tag
+        LATEST_TAG=$(git for-each-ref --sort=-creatordate --format '%(refname:short)' refs/tags | sed -n '2p')
+        
+        if [ -n "$LATEST_TAG" ]; then
+          echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
+          echo "Changes since ${LATEST_TAG}:" >> $GITHUB_OUTPUT
+          echo "" >> $GITHUB_OUTPUT
+          
+          # Get all commits since last release with commit hash and author
+          echo "### Added" >> $GITHUB_OUTPUT
+          git log ${LATEST_TAG}..HEAD --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - (feat|add|new)' | sed 's/^[a-f0-9]* - feat: /- /' >> $GITHUB_OUTPUT || true
+          echo "" >> $GITHUB_OUTPUT
+          
+          echo "### Fixed" >> $GITHUB_OUTPUT
+          git log ${LATEST_TAG}..HEAD --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - fix' | sed 's/^[a-f0-9]* - fix: /- /' >> $GITHUB_OUTPUT || true
+          echo "" >> $GITHUB_OUTPUT
+          
+          echo "### Changed" >> $GITHUB_OUTPUT
+          git log ${LATEST_TAG}..HEAD --pretty=format:"%h - %s (%an)" | grep -ivE '^[a-f0-9]+ - (feat|fix|add|new)' | sed 's/^[a-f0-9]* - /- /' >> $GITHUB_OUTPUT || true
+          echo "EOF" >> $GITHUB_OUTPUT
+        else
+          # First release
+          echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
+          echo "Initial Release" >> $GITHUB_OUTPUT
+          echo "" >> $GITHUB_OUTPUT
+          
+          # Add all commits for initial release
+          echo "### Added" >> $GITHUB_OUTPUT
+          git log --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - (feat|add|new)' | sed 's/^[a-f0-9]* - feat: /- /' >> $GITHUB_OUTPUT || true
+          echo "" >> $GITHUB_OUTPUT
+          
+          echo "### Fixed" >> $GITHUB_OUTPUT
+          git log --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - fix' | sed 's/^[a-f0-9]* - fix: /- /' >> $GITHUB_OUTPUT || true
+          echo "" >> $GITHUB_OUTPUT
+          
+          echo "### Changed" >> $GITHUB_OUTPUT
+          git log --pretty=format:"%h - %s (%an)" | grep -ivE '^[a-f0-9]+ - (feat|fix|add|new)' | sed 's/^[a-f0-9]* - /- /' >> $GITHUB_OUTPUT || true
+          echo "EOF" >> $GITHUB_OUTPUT
+        fi
+
+    - name: Determine Gitea URL
+      id: gitea_url
+      run: |
+        echo "Debug Environment:"
+        echo "GITHUB_SERVER_URL=${GITHUB_SERVER_URL:-not set}"
+        echo "GITEA_SERVER_URL=${GITEA_SERVER_URL:-not set}"
+        echo "GITHUB_REPOSITORY=${GITHUB_REPOSITORY:-not set}"
+        echo "GITEA_REPOSITORY=${GITEA_REPOSITORY:-not set}"
+        echo "RUNNER_NAME=${RUNNER_NAME:-not set}"
+        
+        # Set API URL based on environment
+        if [ -n "${GITEA_ACTIONS}" ] || [ -n "${GITEA_REPOSITORY}" ] || [[ "${RUNNER_NAME}" == *"gitea"* ]]; then
+          GITEA_API_URL="${GITHUB_SERVER_URL}"
+          GITEA_REPO=$(echo "${GITHUB_REPOSITORY}" | cut -d'/' -f2)
+          GITEA_OWNER=$(echo "${GITHUB_REPOSITORY}" | cut -d'/' -f1)
+        else
+          echo "Error: This workflow is only for Gitea"
+          exit 1
+        fi
+        
+        echo "GITEA_API_URL=${GITEA_API_URL}" >> $GITHUB_OUTPUT
+        echo "GITEA_REPO=${GITEA_REPO}" >> $GITHUB_OUTPUT
+        echo "GITEA_OWNER=${GITEA_OWNER}" >> $GITHUB_OUTPUT
+
+    - name: Create Gitea Release
+      env:
+        GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }}
+        GITEA_API_URL: ${{ steps.gitea_url.outputs.GITEA_API_URL }}
+        GITEA_REPO: ${{ steps.gitea_url.outputs.GITEA_REPO }}
+        GITEA_OWNER: ${{ steps.gitea_url.outputs.GITEA_OWNER }}
+      run: |
+        # Debug Token (nur Länge ausgeben für Sicherheit)
+        echo "Debug: Token length: ${#GITEA_TOKEN}"
+        if [ -z "$GITEA_TOKEN" ]; then
+          echo "Error: GITEA_TOKEN is empty"
+          exit 1
+        fi
+
+        VERSION=${{ steps.get_version.outputs.VERSION }}
+        cd .pio/build/esp32dev
+        
+        # Debug-Ausgaben
+        echo "Debug: API URL: ${GITEA_API_URL}"
+        echo "Debug: Repository: ${GITEA_OWNER}/${GITEA_REPO}"
+        
+        # Erstelle zuerst den Release ohne Dateien
+        echo "Debug: Creating release..."
+        RELEASE_DATA="{\"tag_name\":\"v${VERSION}\",\"name\":\"v${VERSION}\",\"body\":\"${{ steps.release_notes.outputs.CHANGES }}\"}"
+        
+        RELEASE_RESPONSE=$(curl -s -w "\n%{http_code}" \
+          -X POST \
+          -H "Authorization: token ${GITEA_TOKEN}" \
+          -H "Content-Type: application/json" \
+          -d "${RELEASE_DATA}" \
+          "${GITEA_API_URL}/api/v1/repos/${GITEA_OWNER}/${GITEA_REPO}/releases")
+        
+        RELEASE_STATUS=$(echo "$RELEASE_RESPONSE" | tail -n1)
+        RELEASE_BODY=$(echo "$RELEASE_RESPONSE" | head -n -1)
+        
+        if [ "$RELEASE_STATUS" != "201" ]; then
+          echo "Error: Failed to create release"
+          echo "Response: $RELEASE_BODY"
+          exit 1
+        fi
+        
+        # Extrahiere die Release-ID aus der Antwort
+        RELEASE_ID=$(echo "$RELEASE_BODY" | grep -o '"id":[0-9]*' | cut -d':' -f2)
+        
+        # Lade die Dateien einzeln hoch
+        for file in upgrade_filaman_firmware_v${VERSION}.bin upgrade_filaman_website_v${VERSION}.bin filaman_full_${VERSION}.bin; do
+          if [ -f "$file" ]; then
+            echo "Debug: Uploading $file..."
+            UPLOAD_RESPONSE=$(curl -s -w "\n%{http_code}" \
+              -X POST \
+              -H "Authorization: token ${GITEA_TOKEN}" \
+              -H "Content-Type: application/octet-stream" \
+              --data-binary @"$file" \
+              "${GITEA_API_URL}/api/v1/repos/${GITEA_OWNER}/${GITEA_REPO}/releases/${RELEASE_ID}/assets?name=${file}")
+            
+            UPLOAD_STATUS=$(echo "$UPLOAD_RESPONSE" | tail -n1)
+            if [ "$UPLOAD_STATUS" != "201" ]; then
+              echo "Warning: Failed to upload $file"
+              echo "Response: $(echo "$UPLOAD_RESPONSE" | head -n -1)"
+            else
+              echo "Successfully uploaded $file"
+            fi
+          fi
+        done
+
+    - name: Install lftp
+      run: sudo apt-get install -y lftp
+      
+    - name: Upload Firmware via FTP
+      if: success()
+      env:
+        FTP_PASSWORD: ${{ secrets.FTP_PASSWORD }}
+        FTP_USER: ${{ secrets.FTP_USER }}
+        FTP_HOST: ${{ secrets.FTP_HOST }}
+        VERSION: ${{ steps.get_version.outputs.VERSION }}
+      run: |
+        echo ${{ secrets.FTP_USER }}
+
+        cd .pio/build/esp32dev
+        lftp -c "set ssl:verify-certificate no; \
+                 set ftp:ssl-protect-data true; \
+                 set ftp:ssl-force true; \
+                 set ssl:check-hostname false; \
+                 set ftp:ssl-auth TLS; \
+                 open -u ${{ secrets.FTP_USER }},${{ secrets.FTP_PASSWORD }} ${{ secrets.FTP_HOST }}; \
+                 put -O / filaman_full_${{ steps.get_version.outputs.VERSION }}.bin -o filaman_full.bin"

.github/workflows/github-release.yml

@@ -0,0 +1,152 @@
+name: GitHub Release
+
+on:
+  workflow_call:
+    secrets:
+      RELEASE_TOKEN:
+        description: 'GitHub token for release creation'
+        required: true
+
+permissions:
+  contents: write
+
+jobs:
+  create-release:
+    runs-on: ubuntu-latest
+    permissions:
+      contents: write
+    steps:
+    - uses: actions/checkout@v4
+      with:
+        fetch-depth: 0
+    
+    - name: Set up Python
+      uses: actions/setup-python@v4
+      with:
+        python-version: '3.x'
+    
+    - name: Install PlatformIO
+      run: |
+        python -m pip install --upgrade pip
+        pip install --upgrade platformio esptool
+    
+    - name: Install xxd
+      run: |
+        sudo apt-get update
+        sudo apt-get install xxd
+    
+    - name: Build Firmware
+      run: |
+        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
+        
+        # Always build firmware and SPIFFS
+        echo "Building firmware and SPIFFS..."
+        pio run -e esp32dev
+        pio run -t buildfs
+        
+        # Copy firmware binary
+        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/upgrade_filaman_firmware_v${VERSION}.bin
+        
+        # Create SPIFFS binary - direct copy without header
+        cp .pio/build/esp32dev/spiffs.bin .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
+        
+        # Create full binary (always)
+        (cd .pio/build/esp32dev && 
+        esptool.py --chip esp32 merge_bin \
+          --fill-flash-size 4MB \
+          --flash_mode dio \
+          --flash_freq 40m \
+          --flash_size 4MB \
+          -o filaman_full_${VERSION}.bin \
+          0x1000 bootloader.bin \
+          0x8000 partitions.bin \
+          0x10000 firmware.bin \
+          0x3D0000 spiffs.bin)
+        
+        # Verify file sizes
+        echo "File sizes:"
+        (cd .pio/build/esp32dev && ls -lh *.bin)
+    
+    - name: Get version from platformio.ini
+      id: get_version
+      run: |
+        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
+        echo "VERSION=$VERSION" >> $GITHUB_OUTPUT
+      
+    - name: Generate Release Notes
+      id: release_notes
+      run: |
+        # Get the latest tag
+        LATEST_TAG=$(git for-each-ref --sort=-creatordate --format '%(refname:short)' refs/tags | sed -n '2p')
+        
+        if [ -n "$LATEST_TAG" ]; then
+          echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
+          echo "Changes since ${LATEST_TAG}:" >> $GITHUB_OUTPUT
+          echo "" >> $GITHUB_OUTPUT
+          
+          # Get all commits since last release with commit hash and author
+          echo "### Added" >> $GITHUB_OUTPUT
+          git log ${LATEST_TAG}..HEAD --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - (feat|add|new)' | sed 's/^[a-f0-9]* - feat: /- /' >> $GITHUB_OUTPUT || true
+          echo "" >> $GITHUB_OUTPUT
+          
+          echo "### Fixed" >> $GITHUB_OUTPUT
+          git log ${LATEST_TAG}..HEAD --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - fix' | sed 's/^[a-f0-9]* - fix: /- /' >> $GITHUB_OUTPUT || true
+          echo "" >> $GITHUB_OUTPUT
+          
+          echo "### Changed" >> $GITHUB_OUTPUT
+          git log ${LATEST_TAG}..HEAD --pretty=format:"%h - %s (%an)" | grep -ivE '^[a-f0-9]+ - (feat|fix|add|new)' | sed 's/^[a-f0-9]* - /- /' >> $GITHUB_OUTPUT || true
+          echo "EOF" >> $GITHUB_OUTPUT
+        else
+          # First release
+          echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
+          echo "Initial Release" >> $GITHUB_OUTPUT
+          echo "" >> $GITHUB_OUTPUT
+          
+          # Add all commits for initial release
+          echo "### Added" >> $GITHUB_OUTPUT
+          git log --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - (feat|add|new)' | sed 's/^[a-f0-9]* - feat: /- /' >> $GITHUB_OUTPUT || true
+          echo "" >> $GITHUB_OUTPUT
+          
+          echo "### Fixed" >> $GITHUB_OUTPUT
+          git log --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - fix' | sed 's/^[a-f0-9]* - fix: /- /' >> $GITHUB_OUTPUT || true
+          echo "" >> $GITHUB_OUTPUT
+          
+          echo "### Changed" >> $GITHUB_OUTPUT
+          git log --pretty=format:"%h - %s (%an)" | grep -ivE '^[a-f0-9]+ - (feat|fix|add|new)' | sed 's/^[a-f0-9]* - /- /' >> $GITHUB_OUTPUT || true
+          echo "EOF" >> $GITHUB_OUTPUT
+        fi
+
+    - name: Create GitHub Release
+      env:
+        GH_TOKEN: ${{ secrets.RELEASE_TOKEN }}
+      run: |
+        VERSION=${{ steps.get_version.outputs.VERSION }}
+        cd .pio/build/esp32dev
+        
+        # Create release with available files
+        FILES_TO_UPLOAD=""
+        
+        # Always add firmware
+        if [ -f "upgrade_filaman_firmware_v${VERSION}.bin" ]; then
+          FILES_TO_UPLOAD="$FILES_TO_UPLOAD upgrade_filaman_firmware_v${VERSION}.bin"
+        fi
+        
+        # Add SPIFFS and full binary only if they exist
+        if [ -f "upgrade_filaman_website_v${VERSION}.bin" ]; then
+          FILES_TO_UPLOAD="$FILES_TO_UPLOAD upgrade_filaman_website_v${VERSION}.bin"
+        fi
+        
+        if [ -f "filaman_full_${VERSION}.bin" ]; then
+          FILES_TO_UPLOAD="$FILES_TO_UPLOAD filaman_full_${VERSION}.bin"
+        fi
+        
+        # Create release with available files
+        if [ -n "$FILES_TO_UPLOAD" ]; then
+          gh release create "v${VERSION}" \
+            --title "Release ${VERSION}" \
+            --notes "${{ steps.release_notes.outputs.CHANGES }}" \
+            $FILES_TO_UPLOAD
+        else
+          echo "Error: No files found to upload"
+          exit 1
+        fi

.github/workflows/providers/gitea-release.yml

@@ -1,143 +0,0 @@
-name: Gitea Release
-
-on:
-  workflow_call:
-    inputs:
-      gitea_ref_name:
-        required: true
-        type: string
-      gitea_server_url:
-        required: true
-        type: string
-      gitea_repository:
-        required: true
-        type: string
-    secrets:
-      GITEA_TOKEN:
-        required: true
-
-jobs:
-  create-release:
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v4
-    
-    - name: Set up Python
-      uses: actions/setup-python@v4
-      with:
-        python-version: '3.x'
-    
-    - name: Install PlatformIO
-      run: |
-        python -m pip install --upgrade pip
-        pip install --upgrade platformio esptool
-    
-    - name: Install xxd
-      run: |
-        sudo apt-get update
-        sudo apt-get install xxd
-    
-    - name: Check for SPIFFS changes
-      id: check_spiffs
-      run: |
-        git fetch --unshallow || true
-        CHANGED_FILES=$(git diff --name-only HEAD^..HEAD)
-        if echo "$CHANGED_FILES" | grep -q "^data/\|^html/"; then
-          echo "SPIFFS_CHANGED=true" >> $GITHUB_OUTPUT
-        else
-          echo "SPIFFS_CHANGED=false" >> $GITHUB_OUTPUT
-        fi
-    
-    - name: Build Firmware
-      run: |
-        # Get version from platformio.ini
-        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
-        
-        # Always build firmware
-        pio run -e esp32dev
-        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_${VERSION}.bin
-        
-        # Only build SPIFFS if changed
-        if [[ "${{ steps.check_spiffs.outputs.SPIFFS_CHANGED }}" == "true" ]]; then
-          echo "Building SPIFFS due to changes..."
-          cp .pio/build/esp32dev/spiffs.bin .pio/build/esp32dev/webpage_${VERSION}.bin
-        fi
-        
-    - name: Prepare binaries
-      run: |
-        cd .pio/build/esp32dev
-        VERSION=$(grep '^version = ' ../../platformio.ini | cut -d'"' -f2)
-        
-        # Create full binary only if SPIFFS changed
-        if [[ "${{ steps.check_spiffs.outputs.SPIFFS_CHANGED }}" == "true" ]]; then
-          echo "Creating full binary..."
-          esptool.py --chip esp32 merge_bin \
-            --fill-flash-size 4MB \
-            --flash_mode dio \
-            --flash_freq 40m \
-            --flash_size 4MB \
-            -o filaman_full_${VERSION}.bin \
-            0x0000 bootloader.bin \
-            0x8000 partitions.bin \
-            0x10000 firmware.bin \
-            0x390000 spiffs.bin
-        fi
-        
-        # Verify file sizes
-        echo "File sizes:"
-        ls -lh *.bin
-        
-    - name: Create Release
-      env:
-        TOKEN: ${{ secrets.GITEA_TOKEN }}
-      run: |
-        TAG="${{ inputs.gitea_ref_name }}"
-        API_URL="${{ inputs.gitea_server_url }}/api/v1"
-        REPO="${{ inputs.gitea_repository }}"
-        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
-        
-        # Create release
-        RESPONSE=$(curl -k -s \
-          -X POST \
-          -H "Authorization: token ${TOKEN}" \
-          -H "Content-Type: application/json" \
-          -d "{
-            \"tag_name\":\"${TAG}\",
-            \"name\":\"Release ${TAG}\",
-            \"body\":\"${{ steps.changelog.outputs.CHANGES }}\"
-          }" \
-          "${API_URL}/repos/${REPO}/releases")
-        
-        RELEASE_ID=$(echo "$RESPONSE" | grep -o '"id":[0-9]*' | cut -d':' -f2 | head -n1)
-        
-        if [ -n "$RELEASE_ID" ]; then
-          echo "Release created with ID: $RELEASE_ID"
-          cd .pio/build/esp32dev
-          
-          # Always upload firmware
-          if [ -f "filaman_${VERSION}.bin" ]; then
-            curl -k -s \
-              -X POST \
-              -H "Authorization: token ${TOKEN}" \
-              -H "Content-Type: application/octet-stream" \
-              --data-binary "@filaman_${VERSION}.bin" \
-              "${API_URL}/repos/${REPO}/releases/${RELEASE_ID}/assets?name=filaman_${VERSION}.bin"
-          fi
-          
-          # Upload SPIFFS and full binary only if they exist
-          for file in webpage_${VERSION}.bin filaman_full_${VERSION}.bin; do
-            if [ -f "$file" ]; then
-              echo "Uploading $file..."
-              curl -k -s \
-                -X POST \
-                -H "Authorization: token ${TOKEN}" \
-                -H "Content-Type: application/octet-stream" \
-                --data-binary "@$file" \
-                "${API_URL}/repos/${REPO}/releases/${RELEASE_ID}/assets?name=$file"
-            fi
-          done
-        else
-          echo "Failed to create release. Response:"
-          echo "$RESPONSE"
-          exit 1
-        fi

.github/workflows/providers/github-release.yml

@@ -1,124 +0,0 @@
-name: GitHub Release
-
-on:
-  workflow_call:
-
-jobs:
-  create-release:
-    runs-on: ubuntu-latest
-    permissions:
-      contents: write
-    steps:
-    - uses: actions/checkout@v4
-    
-    - name: Set up Python
-      uses: actions/setup-python@v4
-      with:
-        python-version: '3.x'
-    
-    - name: Install PlatformIO
-      run: |
-        python -m pip install --upgrade pip
-        pip install --upgrade platformio esptool
-    
-    - name: Install xxd
-      run: |
-        sudo apt-get update
-        sudo apt-get install xxd
-    
-    - name: Check for SPIFFS changes
-      id: check_spiffs
-      run: |
-        git fetch --unshallow || true
-        CHANGED_FILES=$(git diff --name-only HEAD^..HEAD)
-        if echo "$CHANGED_FILES" | grep -q "^data/\|^html/"; then
-          echo "SPIFFS_CHANGED=true" >> $GITHUB_OUTPUT
-        else
-          echo "SPIFFS_CHANGED=false" >> $GITHUB_OUTPUT
-        fi
-    
-    - name: Build Firmware
-      run: |
-        # Get version from platformio.ini
-        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
-        
-        # Always build firmware
-        pio run -e esp32dev
-        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_${VERSION}.bin
-        
-        # Only build SPIFFS if changed
-        if [[ "${{ steps.check_spiffs.outputs.SPIFFS_CHANGED }}" == "true" ]]; then
-          echo "Building SPIFFS due to changes..."
-          cp .pio/build/esp32dev/spiffs.bin .pio/build/esp32dev/webpage_${VERSION}.bin
-        fi
-        
-    - name: Prepare binaries
-      run: |
-        cd .pio/build/esp32dev
-        VERSION=$(grep '^version = ' ../../platformio.ini | cut -d'"' -f2)
-        
-        # Create full binary only if SPIFFS changed
-        if [[ "${{ steps.check_spiffs.outputs.SPIFFS_CHANGED }}" == "true" ]]; then
-          echo "Creating full binary..."
-          esptool.py --chip esp32 merge_bin \
-            --fill-flash-size 4MB \
-            --flash_mode dio \
-            --flash_freq 40m \
-            --flash_size 4MB \
-            -o filaman_full_${VERSION}.bin \
-            0x0000 bootloader.bin \
-            0x8000 partitions.bin \
-            0x10000 firmware.bin \
-            0x390000 spiffs.bin
-        fi
-        
-        # Verify file sizes
-        echo "File sizes:"
-        ls -lh *.bin
-    
-    - name: Get version from tag
-      id: get_version
-      run: |
-        echo "VERSION=${GITHUB_REF#refs/tags/v}" >> $GITHUB_OUTPUT
-      
-    - name: Read CHANGELOG.md
-      id: changelog
-      run: |
-        VERSION=${{ steps.get_version.outputs.VERSION }}
-        CHANGELOG=$(awk "/## \\[$VERSION\\]/{p=1;print;next} /## \\[/{p=0} p" CHANGELOG.md)
-        echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
-        echo "$CHANGELOG" >> $GITHUB_OUTPUT
-        echo "EOF" >> $GITHUB_OUTPUT
-
-    - name: Create GitHub Release
-      env:
-        GH_TOKEN: ${{ github.token }}
-      run: |
-        cd .pio/build/esp32dev
-        VERSION=$(grep '^version = ' ../../platformio.ini | cut -d'"' -f2)
-        FILES_TO_UPLOAD=""
-        
-        # Always add firmware
-        if [ -f "filaman_${VERSION}.bin" ]; then
-          FILES_TO_UPLOAD="$FILES_TO_UPLOAD filaman_${VERSION}.bin"
-        fi
-        
-        # Add SPIFFS and full binary only if they exist
-        if [ -f "webpage_${VERSION}.bin" ]; then
-          FILES_TO_UPLOAD="$FILES_TO_UPLOAD webpage_${VERSION}.bin"
-        fi
-        
-        if [ -f "filaman_full_${VERSION}.bin" ]; then
-          FILES_TO_UPLOAD="$FILES_TO_UPLOAD filaman_full_${VERSION}.bin"
-        fi
-        
-        # Create release with available files
-        if [ -n "$FILES_TO_UPLOAD" ]; then
-          gh release create "${{ github.ref_name }}" \
-            --title "Release ${{ steps.get_version.outputs.VERSION }}" \
-            --notes "${{ steps.changelog.outputs.CHANGES }}" \
-            $FILES_TO_UPLOAD
-        else
-          echo "Error: No files found to upload"
-          exit 1
-        fi

.github/workflows/release.yml

@@ -5,66 +5,37 @@ on:
     tags:
       - 'v*'
 
+permissions:
+  contents: write
+
 jobs:
-  route:
+  detect-provider:
     runs-on: ubuntu-latest
     outputs:
       provider: ${{ steps.provider.outputs.provider }}
-      gitea_ref_name: ${{ steps.provider.outputs.gitea_ref_name }}
-      gitea_server_url: ${{ steps.provider.outputs.gitea_server_url }}
-      gitea_repository: ${{ steps.provider.outputs.gitea_repository }}
     steps:
-      - name: Checkout Repository
-        uses: actions/checkout@v3
-
-      - name: Debug Environment
-        run: |
-          echo "CI Environment Details:"
-          echo "GITHUB_ACTIONS=${GITHUB_ACTIONS:-not set}"
-          echo "GITEA_ACTIONS=${GITEA_ACTIONS:-not set}"
-          echo "GITEA_REPOSITORY=${GITEA_REPOSITORY:-not set}"
-          echo "GITEA_SERVER_URL=${GITEA_SERVER_URL:-not set}"
-          echo "RUNNER_NAME=${RUNNER_NAME:-not set}"
-
       - name: Determine CI Provider
         id: provider
         shell: bash
         run: |
           if [ -n "${GITEA_ACTIONS}" ] || [ -n "${GITEA_REPOSITORY}" ] || [[ "${RUNNER_NAME}" == *"gitea"* ]]; then
             echo "provider=gitea" >> "$GITHUB_OUTPUT"
-            echo "gitea_ref_name=${GITHUB_REF_NAME}" >> "$GITHUB_OUTPUT"
-            echo "gitea_server_url=${GITHUB_SERVER_URL}" >> "$GITHUB_OUTPUT"
-            echo "gitea_repository=${GITHUB_REPOSITORY}" >> "$GITHUB_OUTPUT"
-          elif [ "${GITHUB_ACTIONS}" = "true" ]; then
-            echo "provider=github" >> "$GITHUB_OUTPUT"
           else
-            echo "provider=unknown" >> "$GITHUB_OUTPUT"
-          fi
-
-  verify-provider:
-    needs: route
-    runs-on: ubuntu-latest
-    steps:
-      - name: Echo detected provider
-        run: |
-          echo "Detected CI Provider: ${{ needs.route.outputs.provider }}"
-          if [ "${{ needs.route.outputs.provider }}" = "unknown" ]; then
-            echo "::error::Failed to detect CI provider!"
-            exit 1
+            echo "provider=github" >> "$GITHUB_OUTPUT"
           fi
 
   github-release:
-    needs: [route, verify-provider]
-    if: needs.route.outputs.provider == 'github'
-    uses: ./.github/workflows/providers/github-release.yml
+    needs: detect-provider
+    permissions:
+      contents: write
+    if: needs.detect-provider.outputs.provider == 'github'
+    uses: ./.github/workflows/github-release.yml
+    secrets:
+      RELEASE_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
   gitea-release:
-    needs: [route, verify-provider]
-    if: needs.route.outputs.provider == 'gitea'
-    uses: ./.github/workflows/providers/gitea-release.yml
-    with:
-      gitea_ref_name: ${{ needs.route.outputs.gitea_ref_name }}
-      gitea_server_url: ${{ needs.route.outputs.gitea_server_url }}
-      gitea_repository: ${{ needs.route.outputs.gitea_repository }}
+    needs: detect-provider
+    if: needs.detect-provider.outputs.provider == 'gitea'
+    uses: ./.github/workflows/gitea-release.yml
     secrets:
       GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }}

CHANGELOG.md

@@ -1,5 +1,682 @@
 # Changelog
 
+## [1.3.86] - 2025-02-23
+### Changed
+- update webpages for version v1.3.86
+
+### Fixed
+- streamline FTP credentials usage in Gitea release workflow
+
+
+## [1.3.85] - 2025-02-23
+### Added
+- add FTP_USER variable for Gitea release workflow
+
+### Changed
+- update webpages for version v1.3.85
+
+
+## [1.3.84] - 2025-02-23
+### Added
+- add FTP_HOST variable for firmware upload in Gitea release workflow
+
+### Changed
+- update webpages for version v1.3.84
+
+
+## [1.3.83] - 2025-02-23
+### Changed
+- update webpages for version v1.3.83
+
+### Fixed
+- correct variable interpolation for FTP credentials in Gitea release workflow
+
+
+## [1.3.82] - 2025-02-23
+### Added
+- update Gitea release workflow to use variable interpolation for FTP credentials
+
+### Changed
+- update webpages for version v1.3.82
+
+
+## [1.3.81] - 2025-02-23
+### Added
+- update Gitea release workflow to use environment variables for FTP credentials and version
+
+### Changed
+- update webpages for version v1.3.81
+
+
+## [1.3.80] - 2025-02-23
+### Added
+- add FTP_USER and FTP_PASSWORD secrets for firmware upload in Gitea release workflow
+
+### Changed
+- update webpages for version v1.3.80
+
+
+## [1.3.79] - 2025-02-23
+### Added
+- add FTP_USER input for firmware upload in Gitea release workflow
+
+### Changed
+- update webpages for version v1.3.79
+
+
+## [1.3.78] - 2025-02-23
+### Changed
+- update webpages for version v1.3.78
+
+### Fixed
+- change FTP protocol from FTPS to FTP for file upload in workflow
+
+
+## [1.3.77] - 2025-02-23
+### Changed
+- update webpages for version v1.3.77
+
+### Fixed
+- replace ncftp with lftp for secure firmware upload
+
+
+## [1.3.76] - 2025-02-23
+### Changed
+- update webpages for version v1.3.76
+
+### Fixed
+- replace FTP action with curl for secure firmware upload and install ncftp
+
+
+## [1.3.75] - 2025-02-23
+### Changed
+- update webpages for version v1.3.75
+
+### Fixed
+- update FTP user and enhance SSL options in gitea-release workflow
+
+
+## [1.3.74] - 2025-02-23
+### Changed
+- update webpages for version v1.3.74
+
+### Fixed
+- update password syntax in gitea-release workflow
+
+
+## [1.3.73] - 2025-02-23
+### Changed
+- update webpages for version v1.3.73
+- update version to 1.3.72 in platformio.ini
+
+
+## [1.3.72] - 2025-02-23
+### Changed
+- update webpages for version v1.3.72
+
+### Fixed
+- update FTP options for Gitea release workflow
+
+
+## [1.3.71] - 2025-02-23
+### Added
+- add FTP upload step for firmware in Gitea release workflow
+
+### Changed
+- update webpages for version v1.3.71
+
+
+## [1.3.70] - 2025-02-23
+### Changed
+- update webpages for version v1.3.70
+
+
+## [1.3.69] - 2025-02-23
+### Changed
+- update webpages for version v1.3.69
+
+### Fixed
+- update release note generation to use the second latest tag
+
+
+## [1.3.68] - 2025-02-23
+### Changed
+- update webpages for version v1.3.68
+
+### Fixed
+- update release note generation to include commit hash and author
+- remove commented test line from platformio.ini
+
+
+## [1.3.67] - 2025-02-23
+### Changed
+- update webpages for version v1.3.67
+- ci: update release note generation to use the latest tag
+
+
+## [1.3.66] - 2025-02-23
+### Changed
+- update webpages for version v1.3.66
+- ci: remove redundant git fetch for tags in release note generation
+
+
+## [1.3.65] - 2025-02-22
+### Changed
+- update webpages for version v1.3.65
+- ci: improve release note generation by fetching tags and sorting unique commits
+
+
+## [1.3.64] - 2025-02-22
+### Changed
+- update webpages for version v1.3.64
+- remove unnecessary closing tags from header.html
+
+
+## [1.3.63] - 2025-02-22
+### Added
+- update update-form background and add glass border effect
+
+### Changed
+- update webpages for version v1.3.63
+- update release note generation for initial release handling
+
+
+## [1.3.62] - 2025-02-22
+### Changed
+- update webpages for version v1.3.62
+- update background colors and improve layout for update sections
+
+
+## [1.3.61] - 2025-02-22
+### Added
+- update release notes generation to use previous tag for changes
+
+### Changed
+- update webpages for version v1.3.61
+
+
+## [1.3.60] - 2025-02-22
+### Added
+- remove automatic git push from changelog update script
+- implement release notes generation with categorized changes since last tag
+
+### Changed
+- update webpages for version v1.3.60
+
+
+## [1.3.59] - 2025-02-22
+### Added
+- implement enhanced update progress handling and WebSocket notifications
+- improve update progress reporting and enhance WebSocket notifications
+- enhance update progress handling and add WebSocket closure notification
+- implement WebSocket for update progress and enhance update response handling
+
+### Changed
+- update webpages for version v1.3.59
+
+
+## [1.3.58] - 2025-02-22
+### Added
+- implement backup and restore functionality for Bambu credentials and Spoolman URL
+
+### Changed
+- update webpages for version v1.3.58
+- update upgrade page message and improve progress display logic
+
+
+## [1.3.57] - 2025-02-22
+### Changed
+- update webpages for version v1.3.57
+- update header title to 'Filament Management Tool' in multiple HTML files
+
+
+## [1.3.56] - 2025-02-22
+### Changed
+- update webpages for version v1.3.56
+- update header title and improve SPIFFS update error handling
+- clarify comments in Gitea and GitHub release workflows
+
+
+## [1.3.55] - 2025-02-22
+### Changed
+- update webpages for version v1.3.55
+- update component descriptions in README files
+
+
+## [1.3.54] - 2025-02-22
+### Changed
+- update webpages for version v1.3.54
+- workflow: update SPIFFS binary creation to exclude header
+
+
+## [1.3.53] - 2025-02-22
+### Changed
+- version: update to version 1.3.53
+- update changelog for version 1.3.51
+- update changelog for version 1.3.51
+- workflow: update SPIFFS binary magic byte and revert version to 1.3.51
+
+
+## [1.3.52] - 2025-02-22
+### Changed
+- update webpages for version v1.3.52
+- workflow: update SPIFFS binary creation to use correct chip revision (0xEB for Rev 3)
+
+
+## [1.3.51] - 2025-02-22
+### Changed
+- update changelog for version 1.3.51
+- workflow: update SPIFFS binary magic byte and revert version to 1.3.51
+
+## [1.3.50] - 2025-02-22
+### Changed
+- update webpages for version v1.3.50
+
+
+## [1.3.49] - 2025-02-22
+### Changed
+- update webpages for version v1.3.49
+- workflow: update SPIFFS binary header to use correct chip revision
+
+
+## [1.3.48] - 2025-02-22
+### Changed
+- update webpages for version v1.3.48
+- workflow: update SPIFFS binary header for firmware release
+
+
+## [1.3.47] - 2025-02-22
+### Changed
+- update webpages for version v1.3.47
+- workflow: optimize firmware and SPIFFS update process, improve progress handling and logging
+
+
+## [1.3.46] - 2025-02-22
+### Changed
+- update webpages for version v1.3.46
+
+
+## [1.3.45] - 2025-02-22
+### Changed
+- update webpages for version v1.3.45
+- workflow: update SPIFFS binary creation to include minimal header and adjust update validation logic
+
+
+## [1.3.44] - 2025-02-22
+### Changed
+- update webpages for version v1.3.44
+- update header title to 'Hollo Lollo Trollo'
+- update header title to 'Filament Management Tool' and improve update response messages
+
+
+## [1.3.43] - 2025-02-22
+### Changed
+- update webpages for version v1.3.43
+- update header title to 'Hollo Lollo Trollo'
+
+
+## [1.3.42] - 2025-02-22
+### Changed
+- update webpages for version v1.3.42
+
+### Fixed
+- correct path for SPIFFS binary creation in Gitea release workflow
+
+
+## [1.3.41] - 2025-02-22
+### Changed
+- update webpages for version v1.3.41
+
+### Fixed
+- remove redundant buffer size setting in NFC initialization
+- update SPIFFS binary creation and enhance NFC buffer size
+
+
+## [1.3.40] - 2025-02-22
+### Changed
+- update webpages for version v1.3.40
+
+### Fixed
+- update SPIFFS binary header and enhance WebSocket error handling
+
+
+## [1.3.39] - 2025-02-22
+### Changed
+- update webpages for version v1.3.39
+- workflow: update SPIFFS binary creation to set chip version to max supported
+
+
+## [1.3.38] - 2025-02-22
+### Changed
+- update webpages for version v1.3.38
+- workflow: update SPIFFS binary creation with minimal ESP32 image header
+
+
+## [1.3.37] - 2025-02-22
+### Changed
+- update webpages for version v1.3.37
+- workflow: update ESP32-WROOM image header for SPIFFS binary creation
+
+
+## [1.3.36] - 2025-02-22
+### Changed
+- update webpages for version v1.3.36
+- partition: update SPIFFS binary header and offsets in workflow files
+
+
+## [1.3.35] - 2025-02-22
+### Changed
+- update webpages for version v1.3.35
+- partition: update SPIFFS binary header and offsets in workflow files
+
+
+## [1.3.34] - 2025-02-22
+### Changed
+- update webpages for version v1.3.34
+- partition: update SPIFFS binary creation and offsets in workflow files
+
+
+## [1.3.33] - 2025-02-22
+### Changed
+- update webpages for version v1.3.33
+- partition: update spiffs offset and app sizes in partition files
+- partition: update spiffs offset in partition files
+- partition: update app sizes and offsets in partitions.csv
+
+
+## [1.3.32] - 2025-02-22
+### Changed
+- update webpages for version v1.3.32
+- workflow: update magic byte for SPIFFS binary creation
+
+
+## [1.3.31] - 2025-02-22
+### Changed
+- update webpages for version v1.3.31
+- workflow: remove unnecessary data and SPIFFS change checks from release workflows
+
+
+## [1.3.30] - 2025-02-22
+### Changed
+- update webpages for version v1.3.30
+- workflow: update Gitea and GitHub release workflows to create SPIFFS binary with magic byte
+
+
+## [1.3.29] - 2025-02-21
+### Changed
+- update webpages for version v1.3.29
+- workflow: update Gitea release workflow to create release before file uploads
+
+
+## [1.3.28] - 2025-02-21
+### Changed
+- update webpages for version v1.3.28
+- workflow: update Gitea release workflow to use file uploads with curl
+
+
+## [1.3.27] - 2025-02-21
+### Added
+- workflow: add GITEA_TOKEN secret for Gitea API access in release workflows
+
+### Changed
+- update webpages for version v1.3.27
+
+
+## [1.3.26] - 2025-02-21
+### Changed
+- update webpages for version v1.3.26
+
+### Fixed
+- workflow: improve Gitea release workflow with enhanced error handling and debug outputs
+
+
+## [1.3.25] - 2025-02-21
+### Changed
+- update webpages for version v1.3.25
+- workflow: update Gitea release workflow to include RUNNER_NAME and improve error handling
+
+
+## [1.3.24] - 2025-02-21
+### Changed
+- update webpages for version v1.3.24
+- workflow: rename update files to upgrade in GitHub release workflow
+- workflow: aktualisiere bestehende Einträge im Changelog für vorhandene Versionen
+
+### Fixed
+- workflow: improve Gitea release process with dynamic URL determination and debug outputs
+
+
+## [1.3.23] - 2025-02-21
+### Changed
+- update webpages for version v1.3.23
+
+### Fixed
+- workflow: enhance Gitea release process with debug outputs and API connection checks
+
+
+## [1.3.22] - 2025-02-21
+### Added
+- workflow: improve Gitea release process with additional environment variables and error handling
+
+### Changed
+- update webpages for version v1.3.22
+
+
+## [1.3.21] - 2025-02-21
+### Changed
+- update webpages for version v1.3.21
+- workflow: enhance Gitea release process with API integration and token management
+
+
+## [1.3.20] - 2025-02-21
+### Changed
+- update webpages for version v1.3.20
+- workflow: enable git tagging and pushing for Gitea releases
+
+
+## [1.3.19] - 2025-02-21
+### Changed
+- update webpages for version v1.3.19
+- workflow: enable git push for version tagging in Gitea release
+
+
+## [1.3.18] - 2025-02-21
+### Changed
+- ACHTUNG: Installiere einmal das filaman_full.bin danach kannst du über die upgrade Files aktualisieren und deine Settings bleiben auch erhalten.
+- ATTENTION: Install the filaman_full.bin once, then you can update via the upgrade files and your settings will also be retained.
+
+
+
+## [1.3.18] - 2025-02-21
+### Added
+- add note about filaman_full.bin installation in changelog
+
+### Changed
+- update webpages for version v1.3.18
+- update changelog for version 1.3.18 and enhance update script for existing entries
+
+## [1.3.17] - 2025-02-21
+### Changed
+- update webpages for version v1.3.17
+- ci: comment out git tag and push commands in gitea-release workflow
+
+
+## [1.3.16] - 2025-02-21
+### Changed
+- update webpages for version v1.3.16
+- ci: update filenames for firmware and website binaries in release workflows
+
+
+## [1.3.15] - 2025-02-21
+### Changed
+- update webpages for version v1.3.15
+
+### Fixed
+- ci: fix missing 'fi' in GitHub release workflow script
+
+
+## [1.3.14] - 2025-02-21
+### Changed
+- update webpages for version v1.3.14
+- ci: update GitHub release workflow to improve file upload handling
+
+
+## [1.3.13] - 2025-02-21
+### Changed
+- update webpages for version v1.3.13
+- ci: update GitHub release workflow to use RELEASE_TOKEN for improved security
+
+
+## [1.3.12] - 2025-02-21
+### Changed
+- update webpages for version v1.3.12
+- ci: enhance GitHub release workflow with token handling and file upload improvements
+
+
+## [1.3.11] - 2025-02-21
+### Changed
+- update webpages for version v1.3.11
+- ci: refactor Gitea release workflow by simplifying input handling and removing unnecessary checks
+
+
+## [1.3.10] - 2025-02-21
+### Changed
+- update webpages for version v1.3.10
+- ci: simplify GitHub release workflow by removing provider verification step
+
+
+## [1.3.9] - 2025-02-21
+### Changed
+- update webpages for version v1.3.9
+- ci: comment out permissions for GitHub release workflow
+
+
+## [1.3.8] - 2025-02-21
+### Added
+- add Gitea and GitHub release workflows
+
+### Changed
+- update webpages for version v1.3.8
+
+
+## [1.3.7] - 2025-02-21
+### Added
+- add GitHub and Gitea release workflows
+
+### Changed
+- update webpages for version v1.3.7
+
+
+## [1.3.6] - 2025-02-21
+### Changed
+- update webpages for version v1.3.6
+
+### Fixed
+- update GitHub token reference and correct file path in release workflow
+
+
+## [1.3.5] - 2025-02-21
+### Added
+- enhance release workflow to support Gitea alongside GitHub
+
+### Changed
+- update webpages for version v1.3.5
+
+
+## [1.3.4] - 2025-02-21
+### Added
+- add Gitea and GitHub release workflows
+
+### Changed
+- update webpages for version v1.3.4
+- Merge branch 'old'
+
+
+## [1.3.3] - 2025-02-21
+### Changed
+- update webpages for version v1.3.3
+
+### Fixed
+- correct directory path in GitHub workflows for SPIFFS binary
+
+
+## [1.3.2] - 2025-02-21
+### Added
+- add missing conditional exit in release workflow
+
+### Changed
+- update webpages for version v1.3.2
+
+
+## [1.3.1] - 2025-02-21
+### Added
+- enhance GitHub and Gitea release workflows with Python setup and binary preparation
+
+### Changed
+- update webpages for version v1.3.1
+
+
+## [1.3.0] - 2025-02-21
+### Changed
+- bump version to 1.3.0 in platformio.ini
+
+
+## [1.2.102] - 2025-02-21
+### Changed
+- update webpages for version v1.2.102
+
+### Fixed
+- adjust bootloader offset in binary merge for Gitea and GitHub workflows
+
+
+## [1.2.101] - 2025-02-21
+### Changed
+- update webpages for version v1.2.101
+- always create SPIFFS binary in release workflows
+- migrate calibration value storage from EEPROM to NVS
+
+
+## [1.2.100] - 2025-02-21
+### Changed
+- update webpages for version v1.2.100
+- remove OTA handling and JSON backup/restore functions
+
+
+## [1.2.99] - 2025-02-21
+### Added
+- add SPIFFS change detection and binary copying to release workflows
+- add backup and restore functions for JSON configurations during OTA updates
+
+### Changed
+- update webpages for version v1.2.99
+- update JSON field type checks from JsonObject to String for improved validation
+- update JSON handling in API and Bambu modules for improved object management
+- update platformio.ini dependencies and improve version handling in website.cpp
+- update Cache-Control header to reflect a 1-week duration
+- remove version definition from website.cpp
+- optimize WiFi and WebSocket settings; enhance TCP/IP stack configuration
+- update upgrade page title and heading; adjust cache control duration
+
+
+## [1.2.98] - 2025-02-21
+### Changed
+- update webpages for version v1.2.98
+
+
+## [1.2.97] - 2025-02-21
+### Changed
+- update webpages for version v1.2.97
+- streamline Gitea and GitHub release workflows to check for data changes and update binary handling
+
+
+## [1.2.96] - 2025-02-21
+### Added
+- add SPIFFS build step to Gitea and GitHub release workflows
+
+### Changed
+- update webpages for version v1.2.96
+
+
 ## [1.2.95] - 2025-02-21
 ### Added
 - enhance update process with separate forms for firmware and webpage uploads, including validation and improved UI

README.de.md

@@ -53,14 +53,14 @@ Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaO
 ### Komponenten
 - **ESP32 Entwicklungsboard:** Jede ESP32-Variante.
 [Amazon Link](https://amzn.eu/d/aXThslf)
-- **HX711 Wägezellen-Verstärker:** Für Gewichtsmessung.
-[Amazon Link](https://amzn.eu/d/1wZ4v0x)
-- **OLED Display:** 128x64 SSD1306.
-[Amazon Link](https://amzn.eu/d/dozAYDU)
-- **PN532 NFC Modul:** Für NFC-Tag-Operationen.
-[Amazon Link](https://amzn.eu/d/8205DDh)
-- **NFC-Tag:** NTAG215
-[Amazon Link](https://amzn.eu/d/fywy4c4)
+- **HX711 5kg Wägezellen-Verstärker:** Für Gewichtsmessung.
+[Amazon Link](https://amzn.eu/d/06A0DLb)
+- **OLED 0.96 Zoll I2C weiß/gelb Display:** 128x64 SSD1306.
+[Amazon Link](https://amzn.eu/d/0AuBp2c)
+- **PN532 NFC NXP RFID-Modul V3:** Für NFC-Tag-Operationen.
+[Amazon Link](https://amzn.eu/d/jfIuQXb)
+- **NFC Tags Ntag215:** RFID Tag
+[Amazon Link](https://amzn.eu/d/9Z6mXc1)
 
 ### Pin-Konfiguration
 | Komponente        | ESP32 Pin |

README.md

@@ -56,14 +56,14 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
 ### Components
 - **ESP32 Development Board:** Any ESP32 variant.
 [Amazon Link](https://amzn.eu/d/aXThslf)
-- **HX711 Load Cell Amplifier:** For weight measurement.
-[Amazon Link](https://amzn.eu/d/1wZ4v0x)
-- **OLED Display:** 128x64 SSD1306.
-[Amazon Link](https://amzn.eu/d/dozAYDU)
-- **PN532 NFC Module:** For NFC tag operations.
-[Amazon Link](https://amzn.eu/d/8205DDh)
-- **NFC-Tag:** NTAG215
-[Amazon Link](https://amzn.eu/d/fywy4c4)
+- **HX711 5kg Load Cell Amplifier:** For weight measurement.
+[Amazon Link](https://amzn.eu/d/06A0DLb)
+- **OLED 0.96 Zoll I2C white/yellow Display:** 128x64 SSD1306.
+[Amazon Link](https://amzn.eu/d/0AuBp2c)
+- **PN532 NFC NXP RFID-Modul V3:** For NFC tag operations.
+[Amazon Link](https://amzn.eu/d/jfIuQXb)
+- **NFC Tags Ntag215:** RFID Tag
+[Amazon Link](https://amzn.eu/d/9Z6mXc1)
 
 
 ### Pin Configuration

html/header.html

@@ -44,6 +44,4 @@
             <div class="ram-status" id="ramStatus"></div>
         </div>
     </div>
-</body>
-</html>
 

html/index.html

@@ -44,8 +44,6 @@
             <div class="ram-status" id="ramStatus"></div>
         </div>
     </div>
-</body>
-</html>
 
 <!-- head -->
 

html/rfid.html

@@ -44,8 +44,6 @@
             <div class="ram-status" id="ramStatus"></div>
         </div>
     </div>
-</body>
-</html>
 
 <!-- head -->
 

html/spoolman.html

@@ -44,8 +44,6 @@
             <div class="ram-status" id="ramStatus"></div>
         </div>
     </div>
-</body>
-</html>
 
 <!-- head -->
 

html/style.css

@@ -1051,9 +1051,10 @@ input[type="submit"]:disabled,
 }
 .update-form {
     background: var(--primary-color);
+    box-shadow: 0 4px 8px rgba(0, 0, 0, 0.05);
+    border: var(--glass-border);
     padding: 20px;
     border-radius: 8px;
-    box-shadow: 0 2px 4px rgba(0,0,0,0.1);
     margin: 0 auto;
     width: 400px;
     text-align: center;
@@ -1064,7 +1065,7 @@ input[type="submit"]:disabled,
     padding: 8px;
     border: 1px solid #ddd;
     border-radius: 4px;
-    background: white;
+    background-color: #4CAF50;
 }
 .update-form input[type="submit"] {
     background-color: #4CAF50;
@@ -1086,10 +1087,66 @@ input[type="submit"]:disabled,
 .warning {
     background-color: var(--primary-color);
     border: 1px solid #ffe0b2;
-    color: white;
-    padding: 15px;
     margin: 20px auto;
     border-radius: 4px;
     max-width: 600px;
     text-align: center;
+    color: #e65100;
+    padding: 15px;
+}
+
+.update-options {
+    display: flex;
+    gap: 2rem;
+    margin: 2rem 0;
+}
+.update-section {
+    flex: 1;
+    background: var(--background-green);
+    padding: 1.5rem;
+    border-radius: 8px;
+}
+.update-section h2 {
+    margin-top: 0;
+    color: #333;
+}
+.update-section p {
+    color: #666;
+    margin-bottom: 1rem;
+}
+.progress-container {
+    margin: 20px 0;
+    background: #f0f0f0;
+    border-radius: 4px;
+    overflow: hidden;
+}
+.progress-bar {
+    width: 0;
+    height: 20px;
+    background: #4CAF50;
+    transition: width 0.3s ease-in-out;
+    text-align: center;
+    line-height: 20px;
+    color: white;
+}
+.status {
+    margin-top: 20px;
+    padding: 10px;
+    border-radius: 4px;
+    display: none;
+}
+.status.success {
+    background: #e8f5e9;
+    color: #2e7d32;
+}
+.status.error {
+    background: #ffebee;
+    color: #c62828;
+}
+.warning {
+    background: #fff3e0;
+    color: #e65100;
+    padding: 15px;
+    border-radius: 4px;
+    margin-bottom: 20px;
 }

html/upgrade.html

@@ -1,9 +1,10 @@
-<!DOCTYPE html>
+<!-- head --><!DOCTYPE html>
 <html lang="en">
 <head>
     <meta charset="UTF-8">
     <meta name="viewport" content="width=device-width, initial-scale=1.0">
-    <title>FilaMan - Firmware Update</title>
+    <title>FilaMan - Filament Management Tool</title>
+    <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
     <script>
         fetch('/api/version')
@@ -43,13 +44,12 @@
             <div class="ram-status" id="ramStatus"></div>
         </div>
     </div>
-</body>
-</html>
 
 <!-- head -->
     
     <div class="content">
-        <h1>System Update</h1>
+        <h1>Firmware Upgrade</h1>
+
         <div class="warning">
             <strong>Warning:</strong> Do not power off the device during update.
         </div>
@@ -79,33 +79,11 @@
         </div>
 
         <div class="progress-container" style="display: none;">
-            <div class="progress-bar">0%</</div>
+            <div class="progress-bar">0%</div>
         </div>
         <div class="status"></div>
     </div>
 
-    <style>
-        .update-options {
-            display: flex;
-            gap: 2rem;
-            margin: 2rem 0;
-        }
-        .update-section {
-            flex: 1;
-            background: #f5f5f5;
-            padding: 1.5rem;
-            border-radius: 8px;
-        }
-        .update-section h2 {
-            margin-top: 0;
-            color: #333;
-        }
-        .update-section p {
-            color: #666;
-            margin-bottom: 1rem;
-        }
-    </style>
-
     <script>
         // Hide status indicators during update
         const statusContainer = document.querySelector('.status-container');
@@ -113,8 +91,103 @@
             statusContainer.style.display = 'none';
         }
 
+        const progress = document.querySelector('.progress-bar');
+        const progressContainer = document.querySelector('.progress-container');
+        const status = document.querySelector('.status');
+        let updateInProgress = false;
+        let lastReceivedProgress = 0;
+
+        // WebSocket Handling
+        let ws = null;
+        let wsReconnectTimer = null;
+
+        function connectWebSocket() {
+            ws = new WebSocket('ws://' + window.location.host + '/ws');
+            
+            ws.onmessage = function(event) {
+                try {
+                    const data = JSON.parse(event.data);
+                    if (data.type === "updateProgress" && updateInProgress) {
+                        // Zeige Fortschrittsbalken
+                        progressContainer.style.display = 'block';
+                        
+                        // Aktualisiere den Fortschritt nur wenn er größer ist
+                        const newProgress = parseInt(data.progress);
+                        if (!isNaN(newProgress) && newProgress >= lastReceivedProgress) {
+                            progress.style.width = newProgress + '%';
+                            progress.textContent = newProgress + '%';
+                            lastReceivedProgress = newProgress;
+                        }
+                        
+                        // Zeige Status-Nachricht
+                        if (data.message || data.status) {
+                            status.textContent = data.message || getStatusMessage(data.status);
+                            status.className = 'status success';
+                            status.style.display = 'block';
+                            
+                            // Starte Reload wenn Update erfolgreich
+                            if (data.status === 'success' || lastReceivedProgress >= 98) {
+                                clearTimeout(wsReconnectTimer);
+                                setTimeout(() => {
+                                    window.location.href = '/';
+                                }, 30000);
+                            }
+                        }
+                    }
+                } catch (e) {
+                    console.error('WebSocket message error:', e);
+                }
+            };
+
+            ws.onclose = function() {
+                if (updateInProgress) {
+                    // Wenn der Fortschritt hoch genug ist, gehen wir von einem erfolgreichen Update aus
+                    if (lastReceivedProgress >= 85) {
+                        status.textContent = "Update appears successful! Device is restarting... Page will reload in 30 seconds.";
+                        status.className = 'status success';
+                        status.style.display = 'block';
+                        clearTimeout(wsReconnectTimer);
+                        setTimeout(() => {
+                            window.location.href = '/';
+                        }, 30000);
+                    } else {
+                        // Versuche Reconnect bei niedrigem Fortschritt
+                        wsReconnectTimer = setTimeout(connectWebSocket, 1000);
+                    }
+                }
+            };
+
+            ws.onerror = function(err) {
+                console.error('WebSocket error:', err);
+                if (updateInProgress && lastReceivedProgress >= 85) {
+                    status.textContent = "Update appears successful! Device is restarting... Page will reload in 30 seconds.";
+                    status.className = 'status success';
+                    status.style.display = 'block';
+                    setTimeout(() => {
+                        window.location.href = '/';
+                    }, 30000);
+                }
+            };
+        }
+
+        // Initial WebSocket connection
+        connectWebSocket();
+
+        function getStatusMessage(status) {
+            switch(status) {
+                case 'starting': return 'Starting update...';
+                case 'uploading': return 'Uploading...';
+                case 'finalizing': return 'Finalizing update...';
+                case 'restoring': return 'Restoring configurations...';
+                case 'preparing': return 'Preparing for restart...';
+                case 'success': return 'Update successful! Device is restarting... Page will reload in 30 seconds.';
+                default: return 'Updating...';
+            }
+        }
+
         function handleUpdate(e) {
             e.preventDefault();
+            const form = e.target;
             const file = form.update.files[0];
             const updateType = form.dataset.type;
             
@@ -124,97 +197,52 @@
             }
             
             // Validate file name pattern
-            if (updateType === 'firmware' && !file.name.startsWith('filaman_')) {
-                alert('Please select a valid firmware file (filaman_*.bin)');
+            if (updateType === 'firmware' && !file.name.startsWith('upgrade_filaman_firmware_')) {
+                alert('Please select a valid firmware file (upgrade_filaman_firmware_*.bin)');
                 return;
             }
-            if (updateType === 'webpage' && !file.name.startsWith('webpage_')) {
-                alert('Please select a valid webpage file (webpage_*.bin)');
+            if (updateType === 'webpage' && !file.name.startsWith('upgrade_filaman_website_')) {
+                alert('Please select a valid webpage file (upgrade_filaman_website_*.bin)');
                 return;
             }
             
-            log(`Selected file: ${file.name} (${file.size} bytes)`);
-            
-            // Aktiviere Fortschrittsanzeige
-            progress.style.display = 'block';
-            form.style.display = 'none';
-
-            // Erstelle FormData für den Upload
-            const formData = new FormData();
-            formData.append('update', file);
-            
-            const progress = document.querySelector('.progress-bar');
-            const progressContainer = document.querySelector('.progress-container');
-            const status = document.querySelector('.status');
-            
+            // Reset UI
+            updateInProgress = true;
             progressContainer.style.display = 'block';
             status.style.display = 'none';
             status.className = 'status';
+            progress.style.width = '0%';
+            progress.textContent = '0%';
             
-            // Disable both forms during update
+            // Disable submit buttons
             document.querySelectorAll('form input[type=submit]').forEach(btn => btn.disabled = true);
 
+            // Send update
             const xhr = new XMLHttpRequest();
             xhr.open('POST', '/update', true);
-            xhr.upload.onprogress = (e) => {
-                if (e.lengthComputable) {
-                    const percentComplete = (e.loaded / e.total) * 100;
-                    progress.style.width = percentComplete + '%';
-                    progress.textContent = Math.round(percentComplete) + '%';
-                }
-            };
             
             xhr.onload = function() {
-                try {
-                    let response = this.responseText;
-                    try {
-                        const jsonResponse = JSON.parse(response);
-                        response = jsonResponse.message;
-                        
-                        if (jsonResponse.restart) {
-                            status.textContent = response + " Redirecting in 20 seconds...";
-                            let countdown = 20;
-                            const timer = setInterval(() => {
-                                countdown--;
-                                if (countdown <= 0) {
-                                    clearInterval(timer);
-                                    window.location.href = '/';
-                                } else {
-                                    status.textContent = response + ` Redirecting in ${countdown} seconds...`;
-                                }
-                            }, 1000);
-                        }
-                    } catch (e) {
-                        if (!isNaN(response)) {
-                            const percent = parseInt(response);
-                            progress.style.width = percent + '%';
-                            progress.textContent = percent + '%';
-                            return;
-                        }
-                    }
-                    
-                    status.textContent = response;
-                    status.classList.add(xhr.status === 200 ? 'success' : 'error');
-                    status.style.display = 'block';
-                    
-                    if (xhr.status !== 200) {
-                        document.querySelectorAll('form input[type=submit]').forEach(btn => btn.disabled = false);
-                    }
-                } catch (error) {
-                    status.textContent = 'Error: ' + error.message;
-                    status.classList.add('error');
+                if (xhr.status !== 200 && !progress.textContent.startsWith('100')) {
+                    status.textContent = "Update failed: " + (xhr.responseText || "Unknown error");
+                    status.className = 'status error';
                     status.style.display = 'block';
+                    updateInProgress = false;
                     document.querySelectorAll('form input[type=submit]').forEach(btn => btn.disabled = false);
                 }
             };
             
             xhr.onerror = function() {
-                status.textContent = 'Update failed: Network error';
-                status.classList.add('error');
+                if (!progress.textContent.startsWith('100')) {
+                    status.textContent = "Network error during update";
+                    status.className = 'status error';
                     status.style.display = 'block';
+                    updateInProgress = false;
                     document.querySelectorAll('form input[type=submit]').forEach(btn => btn.disabled = false);
+                }
             };
 
+            const formData = new FormData();
+            formData.append('update', file);
             xhr.send(formData);
         }
 

html/waage.html

@@ -44,8 +44,6 @@
             <div class="ram-status" id="ramStatus"></div>
         </div>
     </div>
-</body>
-</html>
 
 <!-- head -->
 

html/wifi.html

@@ -44,8 +44,6 @@
             <div class="ram-status" id="ramStatus"></div>
         </div>
     </div>
-</body>
-</html>
 
 <!-- head -->
 

partitions.csv

@@ -1,6 +1,6 @@
 # Name,   Type, SubType,    Offset,   Size,     Flags
 nvs,      data, nvs,       0x9000,   0x5000,
 otadata,  data, ota,       0xe000,   0x2000,
-app0,     app,  ota_0,     0x10000,  0x180000,
-app1,     app,  ota_1,     0x190000, 0x180000,
-spiffs,   data, spiffs,    0x310000, 0xE0000,
+app0,     app,  ota_0,     0x10000,  0x1E0000,
+app1,     app,  ota_1,     0x1F0000, 0x1E0000,
+spiffs,   data, spiffs,    0x3D0000, 0x30000,

platformio.ini

@@ -9,8 +9,8 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [common]
-version = "1.2.95"
-
+version = "1.3.86"
+##
 [env:esp32dev]
 platform = espressif32
 board = esp32dev
@@ -19,10 +19,11 @@ monitor_speed = 115200
 
 lib_deps =
     tzapu/WiFiManager @ ^2.0.17
-    #https://github.com/me-no-dev/ESPAsyncWebServer.git#master
+    https://github.com/me-no-dev/ESPAsyncWebServer.git#master
     #me-no-dev/AsyncTCP @ ^1.1.1
-    mathieucarbou/ESPAsyncWebServer @ ^3.6.0
-    esp32async/AsyncTCP @ ^3.3.5
+    https://github.com/esphome/AsyncTCP.git
+    #mathieucarbou/ESPAsyncWebServer @ ^3.6.0
+    #esp32async/AsyncTCP @ ^3.3.5
     bogde/HX711 @ ^0.7.5
     adafruit/Adafruit SSD1306 @ ^2.5.13
     adafruit/Adafruit GFX Library @ ^1.11.11
@@ -45,15 +46,16 @@ build_flags =
     -fdata-sections
     -DNDEBUG
     -mtext-section-literals
-    '-D VERSION="${common.version}"'
+    -DVERSION=\"${common.version}\"
     -DASYNCWEBSERVER_REGEX
     -DCORE_DEBUG_LEVEL=3
     -DCONFIG_ARDUHAL_LOG_COLORS=1
     -DOTA_DEBUG=1
     -DCONFIG_OPTIMIZATION_LEVEL_DEBUG=1
-    -DCONFIG_ESP32_PANIC_PRINT_REBOOT
     -DBOOT_APP_PARTITION_OTA_0=1
-    -DCONFIG_LOG_DEFAULT_LEVEL=3
+    -DCONFIG_LWIP_TCP_MSL=60000
+    -DCONFIG_LWIP_TCP_RCV_BUF_DEFAULT=4096
+    -DCONFIG_LWIP_MAX_ACTIVE_TCP=16
     
 extra_scripts = 
     scripts/extra_script.py

scripts/update_changelog.py

@@ -64,29 +64,10 @@ def get_changes_from_git():
     
     return changes
 
-def push_changes(version):
-    """Push changes to upstream"""
-    try:
-        # Stage the CHANGELOG.md
-        subprocess.run(['git', 'add', 'CHANGELOG.md'], check=True)
-        
-        # Commit the changelog
-        commit_msg = f"docs: update changelog for version {version}"
-        subprocess.run(['git', 'commit', '-m', commit_msg], check=True)
-        
-        # Push to origin (local)
-        subprocess.run(['git', 'push', 'origin'], check=True)
-        print("Successfully pushed to origin")
-        
-    except subprocess.CalledProcessError as e:
-        print(f"Error during git operations: {e}")
-        return False
-    return True
-
 def update_changelog():
-    print("Starting changelog update...")  # Add this line
+    print("Starting changelog update...")
     version = get_version()
-    print(f"Current version: {version}")   # Add this line
+    print(f"Current version: {version}")
     today = datetime.now().strftime('%Y-%m-%d')
     
     script_dir = os.path.dirname(os.path.abspath(__file__))
@@ -111,7 +92,7 @@ def update_changelog():
     if not os.path.exists(changelog_path):
         with open(changelog_path, 'w') as f:
             f.write(f"# Changelog\n\n{changelog_entry}")
-        push_changes(version)
+        print(f"Created new changelog file with version {version}")
     else:
         with open(changelog_path, 'r') as f:
             content = f.read()
@@ -120,9 +101,30 @@ def update_changelog():
             updated_content = content.replace("# Changelog\n", f"# Changelog\n\n{changelog_entry}")
             with open(changelog_path, 'w') as f:
                 f.write(updated_content)
-            push_changes(version)
+            print(f"Added new version {version} to changelog")
         else:
-            print(f"Version {version} already exists in changelog")
+            # Version existiert bereits, aktualisiere die bestehenden Einträge
+            version_pattern = f"## \\[{version}\\] - \\d{{4}}-\\d{{2}}-\\d{{2}}"
+            next_version_pattern = "## \\[.*?\\] - \\d{4}-\\d{2}-\\d{2}"
+            
+            # Finde den Start der aktuellen Version
+            version_match = re.search(version_pattern, content)
+            if version_match:
+                version_start = version_match.start()
+                # Suche nach der nächsten Version
+                next_version_match = re.search(next_version_pattern, content[version_start + 1:])
+                
+                if next_version_match:
+                    # Ersetze den Inhalt zwischen aktueller und nächster Version
+                    next_version_pos = version_start + 1 + next_version_match.start()
+                    updated_content = content[:version_start] + changelog_entry + content[next_version_pos:]
+                else:
+                    # Wenn keine nächste Version existiert, ersetze bis zum Ende
+                    updated_content = content[:version_start] + changelog_entry + "\n"
+                
+                with open(changelog_path, 'w') as f:
+                    f.write(updated_content)
+                print(f"Updated entries for version {version}")
 
 if __name__ == "__main__":
     update_changelog()

src/api.cpp

@@ -60,10 +60,10 @@ JsonDocument fetchSpoolsForWebsite() {
             JsonArray filteredSpools = filteredDoc.to<JsonArray>();
 
             for (JsonObject spool : spools) {
-                JsonObject filteredSpool = filteredSpools.createNestedObject();
+                JsonObject filteredSpool = filteredSpools.add<JsonObject>();
                 filteredSpool["extra"]["nfc_id"] = spool["extra"]["nfc_id"];
 
-                JsonObject filament = filteredSpool.createNestedObject("filament");
+                JsonObject filament = filteredSpool["filament"].to<JsonObject>();
                 filament["sm_id"] = spool["id"];
                 filament["id"] = spool["filament"]["id"];
                 filament["name"] = spool["filament"]["name"];
@@ -73,7 +73,7 @@ JsonDocument fetchSpoolsForWebsite() {
                 filament["price_meter"] = spool["filament"]["extra"]["price_meter"];
                 filament["price_gramm"] = spool["filament"]["extra"]["price_gramm"];
 
-                JsonObject vendor = filament.createNestedObject("vendor");
+                JsonObject vendor = filament["vendor"].to<JsonObject>();
                 vendor["id"] = spool["filament"]["vendor"]["id"];
                 vendor["name"] = spool["filament"]["vendor"]["name"];
             }
@@ -110,13 +110,13 @@ JsonDocument fetchAllSpoolsInfo() {
             JsonArray filteredSpools = filteredDoc.to<JsonArray>();
 
             for (JsonObject spool : spools) {
-                JsonObject filteredSpool = filteredSpools.createNestedObject();
+                JsonObject filteredSpool = filteredSpools.add<JsonObject>();
                 filteredSpool["price"] = spool["price"];
                 filteredSpool["remaining_weight"] = spool["remaining_weight"];
                 filteredSpool["used_weight"] = spool["used_weight"];
                 filteredSpool["extra"]["nfc_id"] = spool["extra"]["nfc_id"];
 
-                JsonObject filament = filteredSpool.createNestedObject("filament");
+                JsonObject filament = filteredSpool["filament"].to<JsonObject>();
                 filament["id"] = spool["filament"]["id"];
                 filament["name"] = spool["filament"]["name"];
                 filament["material"] = spool["filament"]["material"];
@@ -125,11 +125,11 @@ JsonDocument fetchAllSpoolsInfo() {
                 filament["spool_weight"] = spool["filament"]["spool_weight"];
                 filament["color_hex"] = spool["filament"]["color_hex"];
 
-                JsonObject vendor = filament.createNestedObject("vendor");
+                JsonObject vendor = filament["vendor"].to<JsonObject>();
                 vendor["id"] = spool["filament"]["vendor"]["id"];
                 vendor["name"] = spool["filament"]["vendor"]["name"];
 
-                JsonObject extra = filament.createNestedObject("extra");
+                JsonObject extra = filament["extra"].to<JsonObject>();
                 extra["nozzle_temperature"] = spool["filament"]["extra"]["nozzle_temperature"];
                 extra["price_gramm"] = spool["filament"]["extra"]["price_gramm"];
                 extra["price_meter"] = spool["filament"]["extra"]["price_meter"];
@@ -186,7 +186,7 @@ bool updateSpoolTagId(String uidString, const char* payload) {
     }
     
     // Überprüfe, ob die erforderlichen Felder vorhanden sind
-    if (!doc.containsKey("sm_id") || doc["sm_id"] == "") {
+    if (!doc["sm_id"].is<String>() || doc["sm_id"].as<String>() == "") {
         Serial.println("Keine Spoolman-ID gefunden.");
         return false;
     }
@@ -368,7 +368,7 @@ bool checkSpoolmanExtraFields() {
                 for (uint8_t s = 0; s < extraLength; s++) {
                     bool found = false;
                     for (JsonObject field : doc.as<JsonArray>()) {
-                        if (field.containsKey("key") && field["key"] == extraFields[s]) {
+                        if (field["key"].is<String>() && field["key"] == extraFields[s]) {
                             Serial.println("Feld gefunden: " + extraFields[s]);
                             found = true;
                             break;
@@ -430,7 +430,7 @@ bool checkSpoolmanInstance(const String& url) {
             String payload = http.getString();
             JsonDocument doc;
             DeserializationError error = deserializeJson(doc, payload);
-            if (!error && doc.containsKey("status")) {
+            if (!error && doc["status"].is<String>()) {
                 const char* status = doc["status"];
                 http.end();
 
@@ -469,7 +469,7 @@ bool saveSpoolmanUrl(const String& url) {
 
 String loadSpoolmanUrl() {
     JsonDocument doc;
-    if (loadJsonValue("/spoolman_url.json", doc) && doc.containsKey("url")) {
+    if (loadJsonValue("/spoolman_url.json", doc) && doc["url"].is<String>()) {
         return doc["url"].as<String>();
     }
     Serial.println("Keine gültige Spoolman-URL gefunden.");

src/bambu.cpp

@@ -58,7 +58,7 @@ bool saveBambuCredentials(const String& ip, const String& serialnr, const String
 
 bool loadBambuCredentials() {
     JsonDocument doc;
-    if (loadJsonValue("/bambu_credentials.json", doc) && doc.containsKey("bambu_ip")) {
+    if (loadJsonValue("/bambu_credentials.json", doc) && doc["bambu_ip"].is<String>()) {
         // Temporäre Strings für die Werte
         String ip = doc["bambu_ip"].as<String>();
         String code = doc["bambu_accesscode"].as<String>();
@@ -270,9 +270,9 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
     }
 
     // Prüfen, ob "print->upgrade_state" und "print.ams.ams" existieren
-    if (doc["print"].containsKey("upgrade_state")) {
+    if (doc["print"]["upgrade_state"].is<String>()) {
         // Prüfen ob AMS-Daten vorhanden sind
-        if (!doc["print"].containsKey("ams") || !doc["print"]["ams"].containsKey("ams")) {
+        if (!doc["print"]["ams"].is<String>() || !doc["print"]["ams"]["ams"].is<String>()) {
             return;
         }
 
@@ -315,7 +315,7 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
         }
 
         // Prüfe die externe Spule
-        if (!hasChanges && doc["print"].containsKey("vt_tray")) {
+        if (!hasChanges && doc["print"]["vt_tray"].is<String>()) {
             JsonObject vtTray = doc["print"]["vt_tray"];
             bool foundExternal = false;
             
@@ -363,7 +363,7 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
         ams_count = amsArray.size();
 
         // Wenn externe Spule vorhanden, füge sie hinzu
-        if (doc["print"].containsKey("vt_tray")) {
+        if (doc["print"]["vt_tray"].is<String>()) {
             JsonObject vtTray = doc["print"]["vt_tray"];
             int extIdx = ams_count;  // Index für externe Spule
             ams_data[extIdx].ams_id = 255;  // Spezielle ID für externe Spule
@@ -387,14 +387,14 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
         JsonArray wsArray = wsDoc.to<JsonArray>();
 
         for (int i = 0; i < ams_count; i++) {
-            JsonObject amsObj = wsArray.createNestedObject();
+            JsonObject amsObj = wsArray.add<JsonObject>();
             amsObj["ams_id"] = ams_data[i].ams_id;
 
-            JsonArray trays = amsObj.createNestedArray("tray");
+            JsonArray trays = amsObj["tray"].to<JsonArray>();
             int maxTrays = (ams_data[i].ams_id == 255) ? 1 : 4;
             
             for (int j = 0; j < maxTrays; j++) {
-                JsonObject trayObj = trays.createNestedObject();
+                JsonObject trayObj = trays.add<JsonObject>();
                 trayObj["id"] = ams_data[i].trays[j].id;
                 trayObj["tray_info_idx"] = ams_data[i].trays[j].tray_info_idx;
                 trayObj["tray_type"] = ams_data[i].trays[j].tray_type;
@@ -427,14 +427,14 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
                 JsonArray wsArray = wsDoc.to<JsonArray>();
 
                 for (int j = 0; j < ams_count; j++) {
-                    JsonObject amsObj = wsArray.createNestedObject();
+                    JsonObject amsObj = wsArray.add<JsonObject>();
                     amsObj["ams_id"] = ams_data[j].ams_id;
 
-                    JsonArray trays = amsObj.createNestedArray("tray");
+                    JsonArray trays = amsObj["tray"].to<JsonArray>();
                     int maxTrays = (ams_data[j].ams_id == 255) ? 1 : 4;
                     
                     for (int k = 0; k < maxTrays; k++) {
-                        JsonObject trayObj = trays.createNestedObject();
+                        JsonObject trayObj = trays.add<JsonObject>();
                         trayObj["id"] = ams_data[j].trays[k].id;
                         trayObj["tray_info_idx"] = ams_data[j].trays[k].tray_info_idx;
                         trayObj["tray_type"] = ams_data[j].trays[k].tray_type;

src/main.cpp

@@ -19,6 +19,12 @@
 void setup() {
   Serial.begin(115200);
 
+  uint64_t chipid;
+
+  chipid = ESP.getEfuseMac(); //The chip ID is essentially its MAC address(length: 6 bytes).
+  Serial.printf("ESP32 Chip ID = %04X", (uint16_t)(chipid >> 32)); //print High 2 bytes
+  Serial.printf("%08X\n", (uint32_t)chipid); //print Low 4bytes.
+
   // Initialize SPIFFS
   initializeSPIFFS();
 

src/ota.cpp

@@ -1,240 +0,0 @@
-#include <Arduino.h>
-#include "ota.h"
-#include <Update.h>
-#include <SPIFFS.h>
-#include "commonFS.h"
-#include "bambu.h"
-#include "scale.h"
-#include "nfc.h"
-
-#define UPLOAD_TIMEOUT_MS 60000  // 60 Sekunden Timeout für den gesamten Upload
-#define CHUNK_RESPONSE_TIMEOUT_MS 10000  // 10 Sekunden Timeout pro Chunk
-#define MAX_FAILED_CHUNKS 3  // Maximale Anzahl fehlgeschlagener Chunks bevor Abbruch
-#define MAX_FILE_SIZE 4194304    // 4MB Limit
-
-static bool tasksAreStopped = false;
-static uint32_t lastChunkTime = 0;
-static size_t failedChunks = 0;
-static size_t expectedOffset = 0;
-static size_t totalSize = 0;
-
-void stopAllTasks() {
-    Serial.println("Stopping RFID Reader");
-    if (RfidReaderTask) vTaskSuspend(RfidReaderTask);
-    Serial.println("Stopping Bambu");
-    if (BambuMqttTask) vTaskSuspend(BambuMqttTask);
-    Serial.println("Stopping Scale");
-    if (ScaleTask) vTaskSuspend(ScaleTask);
-    vTaskDelay(100 / portTICK_PERIOD_MS);
-    Serial.println("All tasks stopped");
-}
-
-void performStageTwo() {
-    if (!SPIFFS.begin(true)) {
-        Serial.println("Error: Could not mount SPIFFS for stage 2");
-        return;
-    }
-
-    File firmwareFile = SPIFFS.open("/firmware.bin", "r");
-    if (!firmwareFile) {
-        Serial.println("Error: Could not open firmware.bin from SPIFFS");
-        return;
-    }
-
-    size_t firmwareSize = firmwareFile.size();
-    size_t maxAppSpace = (ESP.getFreeSketchSpace() - 0x1000) & 0xFFFFF000;
-
-    Serial.printf("Stage 2 - Firmware size: %u bytes\n", firmwareSize);
-    Serial.printf("Available space: %u bytes\n", maxAppSpace);
-
-    if (firmwareSize > maxAppSpace) {
-        Serial.printf("Error: Not enough space for firmware. Need %u bytes but only have %u bytes\n", 
-                    firmwareSize, maxAppSpace);
-        return;
-    }
-
-    if (!Update.begin(firmwareSize)) {
-        Update.printError(Serial);
-        return;
-    }
-
-    size_t written = Update.writeStream(firmwareFile);
-    if (written != firmwareSize) {
-        Update.printError(Serial);
-        return;
-    }
-
-    if (!Update.end(true)) {
-        Update.printError(Serial);
-        return;
-    }
-
-    firmwareFile.close();
-    SPIFFS.remove("/firmware.bin"); // Cleanup
-    Serial.println("Stage 2 update successful, restarting...");
-    delay(500);
-    ESP.restart();
-}
-
-void checkForStagedUpdate() {
-    if (!SPIFFS.begin(true)) {
-        return;
-    }
-
-    if (SPIFFS.exists("/firmware.bin")) {
-        Serial.println("Found staged firmware update, initiating stage 2...");
-        performStageTwo();
-    }
-}
-
-void handleOTAUpload(AsyncWebServerRequest *request, String filename, size_t index, uint8_t *data, size_t len, bool final) {
-    static File stagingFile;
-    static uint32_t uploadStartTime = 0;
-    
-    if (!index) {
-        // Überprüfe Gesamtgröße im Header
-        if (request->hasHeader("X-Total-Size")) {
-            totalSize = request->header("X-Total-Size").toInt();
-            if (totalSize > MAX_FILE_SIZE) {
-                request->send(413, "application/json", 
-                            "{\"status\":\"error\",\"message\":\"File too large\"}");
-                return;
-            }
-        }
-
-        uploadStartTime = millis();
-        lastChunkTime = millis();
-        expectedOffset = 0;
-        failedChunks = 0;
-        
-        bool isSpiffsUpdate = filename.endsWith("_spiffs.bin");
-        Serial.printf("Update Start: %s (type: %s)\n", filename.c_str(), isSpiffsUpdate ? "SPIFFS" : "OTA");
-        Serial.printf("Total size: %u bytes\n", totalSize);
-        
-        // Überprüfe Header für Chunk-Informationen
-        if (request->hasHeader("X-Chunk-Offset")) {
-            String offsetStr = request->header("X-Chunk-Offset");
-            expectedOffset = offsetStr.toInt();
-        }
-
-        if (request->contentLength() == 0) {
-            request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Invalid file size\"}");
-            return;
-        }
-
-        if (!tasksAreStopped) {
-            stopAllTasks();
-            tasksAreStopped = true;
-        }
-
-        if (isSpiffsUpdate) {
-            if (!SPIFFS.begin(true)) {
-                request->send(400, "application/json", 
-                            "{\"status\":\"error\",\"message\":\"Could not mount SPIFFS\"}");
-                return;
-            }
-            
-            if (!Update.begin(totalSize > 0 ? totalSize : request->contentLength(), U_SPIFFS)) {
-                Update.printError(Serial);
-                request->send(400, "application/json", 
-                            "{\"status\":\"error\",\"message\":\"SPIFFS update initialization failed\"}");
-                return;
-            }
-        } else {
-            stagingFile = SPIFFS.open("/firmware.bin", "w");
-            if (!stagingFile) {
-                request->send(400, "application/json", 
-                            "{\"status\":\"error\",\"message\":\"Could not create staging file\"}");
-                return;
-            }
-        }
-    }
-
-    // Chunk Validierung
-    if (request->hasHeader("X-Chunk-Offset")) {
-        size_t chunkOffset = request->header("X-Chunk-Offset").toInt();
-        if (chunkOffset != expectedOffset) {
-            failedChunks++;
-            if (failedChunks >= MAX_FAILED_CHUNKS) {
-                if (stagingFile) {
-                    stagingFile.close();
-                    SPIFFS.remove("/firmware.bin");
-                }
-                Update.abort();
-                request->send(400, "application/json", 
-                            "{\"status\":\"error\",\"message\":\"Too many failed chunks\"}");
-                return;
-            }
-            request->send(400, "application/json", 
-                        "{\"status\":\"error\",\"message\":\"Invalid chunk offset\"}");
-            return;
-        }
-    }
-
-    // Timeout Überprüfungen
-    uint32_t currentTime = millis();
-    if (currentTime - uploadStartTime > UPLOAD_TIMEOUT_MS) {
-        if (stagingFile) {
-            stagingFile.close();
-            SPIFFS.remove("/firmware.bin");
-        }
-        Update.abort();
-        request->send(408, "application/json", "{\"status\":\"error\",\"message\":\"Upload timeout\"}");
-        return;
-    }
-
-    if (currentTime - lastChunkTime > CHUNK_RESPONSE_TIMEOUT_MS) {
-        if (stagingFile) {
-            stagingFile.close();
-            SPIFFS.remove("/firmware.bin");
-        }
-        Update.abort();
-        request->send(408, "application/json", "{\"status\":\"error\",\"message\":\"Chunk timeout\"}");
-        return;
-    }
-    lastChunkTime = currentTime;
-
-    if (stagingFile) {
-        size_t written = stagingFile.write(data, len);
-        if (written != len) {
-            stagingFile.close();
-            SPIFFS.remove("/firmware.bin");
-            request->send(400, "application/json", 
-                        "{\"status\":\"error\",\"message\":\"Write to SPIFFS failed\"}");
-            return;
-        }
-    } else {
-        if (Update.write(data, len) != len) {
-            Update.printError(Serial);
-            request->send(400, "application/json", 
-                        "{\"status\":\"error\",\"message\":\"Write failed\"}");
-            return;
-        }
-    }
-
-    expectedOffset += len;
-
-    if (final) {
-        if (stagingFile) {
-            stagingFile.close();
-            Serial.println("Stage 1 complete - firmware staged in SPIFFS");
-            request->send(200, "application/json", 
-                        "{\"status\":\"success\",\"message\":\"Update staged successfully! Starting stage 2...\"}");
-            delay(100);
-            performStageTwo();
-        } else {
-            if (!Update.end(true)) {
-                Update.printError(Serial);
-                request->send(400, "application/json", 
-                            "{\"status\":\"error\",\"message\":\"Update failed\"}");
-                return;
-            }
-            Serial.println("SPIFFS update successful, restarting...");
-            request->send(200, "application/json", 
-                        "{\"status\":\"success\",\"message\":\"SPIFFS update successful! Device will restart...\",\"restart\":true}");
-            delay(500);
-            ESP.restart();
-        }
-    }
-}
-

src/ota.h

@@ -1,15 +0,0 @@
-#ifndef OTA_H
-#define OTA_H
-
-#include <ESPAsyncWebServer.h>
-
-// Update size unknown constant, falls nicht bereits definiert
-#ifndef UPDATE_SIZE_UNKNOWN
-#define UPDATE_SIZE_UNKNOWN 0xFFFFFFFF
-#endif
-
-void stopAllTasks();
-void handleOTAUpload(AsyncWebServerRequest *request, String filename, size_t index, uint8_t *data, size_t len, bool final);
-void checkForStagedUpdate();
-
-#endif

src/scale.cpp

@@ -3,9 +3,9 @@
 #include <ArduinoJson.h>
 #include "config.h"
 #include "HX711.h"
-#include <EEPROM.h>
 #include "display.h"
 #include "esp_task_wdt.h"
+#include <Preferences.h>
 
 HX711 scale;
 
@@ -17,6 +17,10 @@ uint8_t weigthCouterToApi = 0;
 uint8_t scale_tare_counter = 0;
 uint8_t pauseMainTask = 0;
 
+Preferences preferences;
+const char* NVS_NAMESPACE = "scale";
+const char* NVS_KEY_CALIBRATION = "cal_value";
+
 // ##### Funktionen für Waage #####
 uint8_t tareScale() {
   Serial.println("Tare scale");
@@ -48,13 +52,12 @@ void scale_loop(void * parameter) {
 
 void start_scale() {
   Serial.println("Prüfe Calibration Value");
-  long calibrationValue; // calibration value (see example file "Calibration.ino")
-  //calibrationValue = 696.0; // uncomment this if you want to set the calibration value in the sketch
+  long calibrationValue;
 
-  EEPROM.begin(512);
-  EEPROM.get(calVal_eepromAdress, calibrationValue); // uncomment this if you want to fetch the calibration value from eeprom
-
-  //calibrationValue = EEPROM.read(calVal_eepromAdress);
+  // NVS
+  preferences.begin(NVS_NAMESPACE, true); // true = readonly
+  calibrationValue = preferences.getLong(NVS_KEY_CALIBRATION, defaultScaleCalibrationValue);
+  preferences.end();
 
   Serial.print("Read Scale Calibration Value ");
   Serial.println(calibrationValue);
@@ -137,18 +140,19 @@ uint8_t calibrate_scale() {
     {
       Serial.print("New calibration value has been set to: ");
       Serial.println(newCalibrationValue);
-      Serial.print("Save this value to EEPROM adress ");
-      Serial.println(calVal_eepromAdress);
 
-      //EEPROM.put(calVal_eepromAdress, newCalibrationValue);
-      EEPROM.put(calVal_eepromAdress, newCalibrationValue);
-      EEPROM.commit();
+      // Speichern mit NVS
+      preferences.begin(NVS_NAMESPACE, false); // false = readwrite
+      preferences.putLong(NVS_KEY_CALIBRATION, newCalibrationValue);
+      preferences.end();
 
-      EEPROM.get(calVal_eepromAdress, newCalibrationValue);
-      //newCalibrationValue = EEPROM.read(calVal_eepromAdress);
+      // Verifizieren
+      preferences.begin(NVS_NAMESPACE, true);
+      long verifyValue = preferences.getLong(NVS_KEY_CALIBRATION, 0);
+      preferences.end();
 
-      Serial.print("Read Value ");
-      Serial.println(newCalibrationValue);
+      Serial.print("Verified stored value: ");
+      Serial.println(verifyValue);
 
       Serial.println("End calibration, revome weight");
 

src/website.cpp

@@ -7,12 +7,15 @@
 #include "nfc.h"
 #include "scale.h"
 #include "esp_task_wdt.h"
-#include "ota.h"
 #include <Update.h>
+#include "display.h"
+
+#ifndef VERSION
+  #define VERSION "1.1.0"
+#endif
 
 // Cache-Control Header definieren
-#define CACHE_CONTROL "max-age=31536000" // Cache für 1 Jahr
-#define VERSION "1.0.0"
+#define CACHE_CONTROL "max-age=604800" // Cache für 1 Woche
 
 AsyncWebServer server(webserverPort);
 AsyncWebSocket ws("/ws");
@@ -20,6 +23,49 @@ AsyncWebSocket ws("/ws");
 uint8_t lastSuccess = 0;
 uint8_t lastHasReadRfidTag = 0;
 
+// Globale Variablen für Config Backups hinzufügen
+String bambuCredentialsBackup;
+String spoolmanUrlBackup;
+
+// Globale Variable für den Update-Typ
+static int currentUpdateCommand = 0;
+
+// Globale Update-Variablen
+static size_t updateTotalSize = 0;
+static size_t updateWritten = 0;
+static bool isSpiffsUpdate = false;
+
+void sendUpdateProgress(int progress, const char* status = nullptr, const char* message = nullptr) {
+    static int lastSentProgress = -1;
+    
+    // Verhindere zu häufige Updates
+    if (progress == lastSentProgress && !status && !message) {
+        return;
+    }
+    
+    String progressMsg = "{\"type\":\"updateProgress\",\"progress\":" + String(progress);
+    if (status) {
+        progressMsg += ",\"status\":\"" + String(status) + "\"";
+    }
+    if (message) {
+        progressMsg += ",\"message\":\"" + String(message) + "\"";
+    }
+    progressMsg += "}";
+    
+    // Sende die Nachricht mehrmals mit Verzögerung für wichtige Updates
+    if (status || abs(progress - lastSentProgress) >= 10 || progress == 100) {
+        for (int i = 0; i < 2; i++) {
+            ws.textAll(progressMsg);
+            delay(100);  // Längerer Delay zwischen Nachrichten
+        }
+    } else {
+        ws.textAll(progressMsg);
+        delay(50);
+    }
+    
+    lastSentProgress = progress;
+}
+
 void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventType type, void *arg, uint8_t *data, size_t len) {
     if (type == WS_EVT_CONNECT) {
         Serial.println("Neuer Client verbunden!");
@@ -30,6 +76,10 @@ void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventTyp
         sendWriteResult(client, 3);
     } else if (type == WS_EVT_DISCONNECT) {
         Serial.println("Client getrennt.");
+    } else if (type == WS_EVT_ERROR) {
+        Serial.printf("WebSocket Client #%u error(%u): %s\n", client->id(), *((uint16_t*)arg), (char*)data);
+    } else if (type == WS_EVT_PONG) {
+        Serial.printf("WebSocket Client #%u pong\n", client->id());
     } else if (type == WS_EVT_DATA) {
         String message = String((char*)data);
         JsonDocument doc;
@@ -46,7 +96,7 @@ void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventTyp
         }
 
         else if (doc["type"] == "writeNfcTag") {
-            if (doc.containsKey("payload")) {
+            if (doc["payload"].is<String>()) {
                 // Versuche NFC-Daten zu schreiben
                 String payloadString;
                 serializeJson(doc["payload"], payloadString);
@@ -157,7 +207,113 @@ void sendAmsData(AsyncWebSocketClient *client) {
     }
 }
 
+void handleUpdate(AsyncWebServer &server) {
+    AsyncCallbackWebHandler* updateHandler = new AsyncCallbackWebHandler();
+    updateHandler->setUri("/update");
+    updateHandler->setMethod(HTTP_POST);
+    
+    updateHandler->onUpload([](AsyncWebServerRequest *request, String filename,
+                             size_t index, uint8_t *data, size_t len, bool final) {
+        if (!index) {
+            updateTotalSize = request->contentLength();
+            updateWritten = 0;
+            isSpiffsUpdate = (filename.indexOf("website") > -1);
+            
+            if (isSpiffsUpdate) {
+                // Backup vor dem Update
+                sendUpdateProgress(0, "backup", "Backing up configurations...");
+                delay(200);
+                backupJsonConfigs();
+                delay(200);
+                
+                const esp_partition_t *partition = esp_partition_find_first(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_DATA_SPIFFS, NULL);
+                if (!partition || !Update.begin(partition->size, U_SPIFFS)) {
+                    request->send(400, "application/json", "{\"success\":false,\"message\":\"Update initialization failed\"}");
+                    return;
+                }
+                sendUpdateProgress(5, "starting", "Starting SPIFFS update...");
+                delay(200);
+            } else {
+                if (!Update.begin(updateTotalSize)) {
+                    request->send(400, "application/json", "{\"success\":false,\"message\":\"Update initialization failed\"}");
+                    return;
+                }
+                sendUpdateProgress(0, "starting", "Starting firmware update...");
+                delay(200);
+            }
+        }
+
+        if (len) {
+            if (Update.write(data, len) != len) {
+                request->send(400, "application/json", "{\"success\":false,\"message\":\"Write failed\"}");
+                return;
+            }
+            
+            updateWritten += len;
+            int currentProgress;
+            
+            // Berechne den Fortschritt basierend auf dem Update-Typ
+            if (isSpiffsUpdate) {
+                // SPIFFS: 5-75% für Upload
+                currentProgress = 5 + (updateWritten * 100) / updateTotalSize;
+            } else {
+                // Firmware: 0-100% für Upload
+                currentProgress = 1 + (updateWritten * 100) / updateTotalSize;
+            }
+            
+            static int lastProgress = -1;
+            if (currentProgress != lastProgress && (currentProgress % 10 == 0 || final)) {
+                sendUpdateProgress(currentProgress, "uploading");
+                oledShowMessage("Update: " + String(currentProgress) + "%");
+                delay(50);
+                lastProgress = currentProgress;
+            }
+        }
+
+        if (final) {
+            if (Update.end(true)) {
+                if (isSpiffsUpdate) {
+                    restoreJsonConfigs();
+                }
+            } else {
+                request->send(400, "application/json", "{\"success\":false,\"message\":\"Update finalization failed\"}");
+            }
+        }
+    });
+
+    updateHandler->onRequest([](AsyncWebServerRequest *request) {
+        if (Update.hasError()) {
+            request->send(400, "application/json", "{\"success\":false,\"message\":\"Update failed\"}");
+            return;
+        }
+
+        // Erste 100% Nachricht
+        ws.textAll("{\"type\":\"updateProgress\",\"progress\":100,\"status\":\"success\",\"message\":\"Update successful! Restarting device...\"}");
+        delay(2000);  // Längerer Delay für die erste Nachricht
+        
+        AsyncWebServerResponse *response = request->beginResponse(200, "application/json", 
+            "{\"success\":true,\"message\":\"Update successful! Restarting device...\"}");
+        response->addHeader("Connection", "close");
+        request->send(response);
+        
+        // Zweite 100% Nachricht zur Sicherheit
+        ws.textAll("{\"type\":\"updateProgress\",\"progress\":100,\"status\":\"success\",\"message\":\"Update successful! Restarting device...\"}");
+        delay(3000);  // Noch längerer Delay vor dem Neustart
+        
+        ESP.restart();
+    });
+
+    server.addHandler(updateHandler);
+}
+
 void setupWebserver(AsyncWebServer &server) {
+    // Deaktiviere alle Debug-Ausgaben
+    Serial.setDebugOutput(false);
+    
+    // WebSocket-Optimierungen
+    ws.onEvent(onWsEvent);
+    ws.enable(true);
+
     // Konfiguriere Server für große Uploads
     server.onRequestBody([](AsyncWebServerRequest *request, uint8_t *data, size_t len, size_t index, size_t total){});
     server.onFileUpload([](AsyncWebServerRequest *request, const String& filename, size_t index, uint8_t *data, size_t len, bool final){});
@@ -228,7 +384,7 @@ void setupWebserver(AsyncWebServer &server) {
         html.replace("{{spoolmanUrl}}", spoolmanUrl);
 
         JsonDocument doc;
-        if (loadJsonValue("/bambu_credentials.json", doc) && doc.containsKey("bambu_ip")) {
+        if (loadJsonValue("/bambu_credentials.json", doc) && doc["bambu_ip"].is<String>()) {
             String bambuIp = doc["bambu_ip"].as<String>();
             String bambuSerial = doc["bambu_serialnr"].as<String>();
             String bambuCode = doc["bambu_accesscode"].as<String>();
@@ -352,69 +508,12 @@ void setupWebserver(AsyncWebServer &server) {
         request->send(response);
     });
 
-    // Update-Handler mit verbesserter Fehlerbehandlung
-    server.on("/update", HTTP_POST, 
-        [](AsyncWebServerRequest *request) {
-            // Nach Update-Abschluss
-            bool success = !Update.hasError();
-            AsyncWebServerResponse *response = request->beginResponse(
-                success ? 200 : 400,
-                "application/json",
-                success ? "{\"success\":true,\"message\":\"Update successful\"}" 
-                       : "{\"success\":false,\"message\":\"Update failed\"}"
-            );
-            response->addHeader("Connection", "close");
-            request->send(response);
-            
-            if (success) {
-                delay(500);
-                ESP.restart();
-            }
-        },
-        [](AsyncWebServerRequest *request, const String& filename, size_t index, uint8_t *data, size_t len, bool final) {
-            static size_t updateSize = 0;
-            static int command = 0;
-
-            if (!index) {
-                updateSize = request->contentLength();
-                command = (filename.indexOf("spiffs") > -1) ? U_SPIFFS : U_FLASH;
-                Serial.printf("Update Start: %s\nSize: %u\nCommand: %d\n", filename.c_str(), updateSize, command);
-
-                if (!Update.begin(updateSize, command)) {
-                    Serial.printf("Update Begin Error: ");
-                    Update.printError(Serial);
-                    String errorMsg = String("Update begin failed: ") + Update.errorString();
-                    request->send(400, "application/json", "{\"success\":false,\"message\":\"" + errorMsg + "\"}");
-                    return;
-                }
-            }
-
-            if (len) {
-                if (Update.write(data, len) != len) {
-                    Serial.printf("Update Write Error: ");
-                    Update.printError(Serial);
-                    String errorMsg = String("Write failed: ") + Update.errorString();
-                    request->send(400, "application/json", "{\"success\":false,\"message\":\"" + errorMsg + "\"}");
-                    return;
-                }
-                Serial.printf("Progress: %u/%u\r", index + len, updateSize);
-            }
-
-            if (final) {
-                if (!Update.end(true)) {
-                    Serial.printf("Update End Error: ");
-                    Update.printError(Serial);
-                    String errorMsg = String("Update end failed: ") + Update.errorString();
-                    request->send(400, "application/json", "{\"success\":false,\"message\":\"" + errorMsg + "\"}");
-                    return;
-                }
-                Serial.printf("\nUpdate Success: %uB\n", index+len);
-            }
-        }
-    );
+    // Update-Handler registrieren
+    handleUpdate(server);
 
     server.on("/api/version", HTTP_GET, [](AsyncWebServerRequest *request){
-        String jsonResponse = "{\"version\": \"" VERSION "\"}";
+        String fm_version = VERSION;
+        String jsonResponse = "{\"version\": \""+ fm_version +"\"}";
         request->send(200, "application/json", jsonResponse);
     });
 
@@ -435,50 +534,49 @@ void setupWebserver(AsyncWebServer &server) {
     Serial.println("Webserver gestartet");
 }
 
-void handleOTAUpload(AsyncWebServerRequest *request, const String& filename, size_t index, uint8_t *data, size_t len, bool final) {
-    if (!index) {
-        // Start eines neuen Uploads
-        Serial.println("Update Start: " + filename);
 
-        // Überprüfe den Dateityp basierend auf dem Dateinamen
-        bool isFirmware = filename.startsWith("filaman_");
-        bool isWebpage = filename.startsWith("webpage_");
-        
-        if (!isFirmware && !isWebpage) {
-            request->send(400, "application/json", "{\"message\":\"Invalid file type. File must start with 'filaman_' or 'webpage_'\"}");
-            return;
+void backupJsonConfigs() {
+    // Bambu Credentials backup
+    if (SPIFFS.exists("/bambu_credentials.json")) {
+        File file = SPIFFS.open("/bambu_credentials.json", "r");
+        if (file) {
+            bambuCredentialsBackup = file.readString();
+            file.close();
+            Serial.println("Bambu credentials backed up");
+        }
     }
 
-        // Wähle den Update-Typ basierend auf dem Dateinamen
-        if (isWebpage) {
-            if (!Update.begin(SPIFFS.totalBytes(), U_SPIFFS)) {
-                Update.printError(Serial);
-                request->send(400, "application/json", "{\"message\":\"SPIFFS Update failed: " + String(Update.errorString()) + "\"}");
-                return;
-            }
-        } else {
-            if (!Update.begin(UPDATE_SIZE_UNKNOWN, U_FLASH)) {
-                Update.printError(Serial);
-                request->send(400, "application/json", "{\"message\":\"Firmware Update failed: " + String(Update.errorString()) + "\"}");
-                return;
+    // Spoolman URL backup
+    if (SPIFFS.exists("/spoolman_url.json")) {
+        File file = SPIFFS.open("/spoolman_url.json", "r");
+        if (file) {
+            spoolmanUrlBackup = file.readString();
+            file.close();
+            Serial.println("Spoolman URL backed up");
         }
     }
 }
 
-    if (Update.write(data, len) != len) {
-        Update.printError(Serial);
-        request->send(400, "application/json", "{\"message\":\"Write failed: " + String(Update.errorString()) + "\"}");
-        return;
+void restoreJsonConfigs() {
+    // Restore Bambu credentials
+    if (bambuCredentialsBackup.length() > 0) {
+        File file = SPIFFS.open("/bambu_credentials.json", "w");
+        if (file) {
+            file.print(bambuCredentialsBackup);
+            file.close();
+            Serial.println("Bambu credentials restored");
+        }
+        bambuCredentialsBackup = ""; // Clear backup
     }
 
-    if (final) {
-        if (!Update.end(true)) {
-            Update.printError(Serial);
-            request->send(400, "application/json", "{\"message\":\"Update failed: " + String(Update.errorString()) + "\"}");
-            return;
+    // Restore Spoolman URL
+    if (spoolmanUrlBackup.length() > 0) {
+        File file = SPIFFS.open("/spoolman_url.json", "w");
+        if (file) {
+            file.print(spoolmanUrlBackup);
+            file.close();
+            Serial.println("Spoolman URL restored");
         }
-        request->send(200, "application/json", "{\"message\":\"Update successful!\", \"restart\": true}");
-        delay(500);
-        ESP.restart();
+        spoolmanUrlBackup = ""; // Clear backup
     }
 }

src/website.h

@@ -29,4 +29,8 @@ void sendNfcData(AsyncWebSocketClient *client);
 void foundNfcTag(AsyncWebSocketClient *client, uint8_t success);
 void sendWriteResult(AsyncWebSocketClient *client, uint8_t success);
 
+// Upgrade-Funktionen
+void backupJsonConfigs();
+void restoreJsonConfigs();
+
 #endif

src/wlan.cpp

@@ -10,11 +10,19 @@ WiFiManager wm;
 bool wm_nonblocking = false;
 
 void initWiFi() {
+    // Optimierte WiFi-Einstellungen
     WiFi.mode(WIFI_STA); // explicitly set mode, esp defaults to STA+AP
     WiFi.setSleep(false); // disable sleep mode
     esp_wifi_set_ps(WIFI_PS_NONE);
     
-    //esp_wifi_set_max_tx_power(72); // Setze maximale Sendeleistung auf 20dBm
+    // Maximale Sendeleistung
+    WiFi.setTxPower(WIFI_POWER_19_5dBm); // Set maximum transmit power
+  
+    // Optimiere TCP/IP Stack
+    esp_wifi_set_protocol(WIFI_IF_STA, WIFI_PROTOCOL_11B | WIFI_PROTOCOL_11G | WIFI_PROTOCOL_11N);
+    
+    // Aktiviere WiFi-Roaming für bessere Stabilität
+    esp_wifi_set_rssi_threshold(-80);
   
     if(wm_nonblocking) wm.setConfigPortalBlocking(false);
     wm.setConfigPortalTimeout(320); // Portal nach 5min schließen