docs: update changelog for version 1.2.45

.github/workflows/providers/build.yml

@@ -0,0 +1,87 @@
+name: Build Firmware
+
+on:
+  workflow_call:
+    outputs:
+      version:
+        description: "The version from the tag"
+        value: ${{ jobs.build.outputs.version }}
+      changelog:
+        description: "The changelog for the current version"
+        value: ${{ jobs.build.outputs.changelog }}
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    outputs:
+      version: ${{ steps.get_version.outputs.VERSION }}
+      changelog: ${{ steps.changelog.outputs.CHANGES }}
+    steps:
+    - uses: actions/checkout@v4
+    
+    - name: Set up Python
+      uses: actions/setup-python@v4
+      with:
+        python-version: '3.x'
+    
+    - name: Install PlatformIO
+      run: |
+        python -m pip install --upgrade pip
+        pip install --upgrade platformio
+    
+    - name: Build Firmware
+      run: |
+        pio run -t buildfs  # Build SPIFFS
+        pio run            # Build firmware
+        
+    - name: Install esptool
+      run: |
+        pip install esptool
+        
+    - name: Merge firmware and SPIFFS
+      run: |
+        esptool.py --chip esp32 merge_bin \
+          --flash_mode dio \
+          --flash_freq 40m \
+          --flash_size 4MB \
+          -o .pio/build/esp32dev/filaman_full.bin \
+          0x1000 .pio/build/esp32dev/bootloader.bin \
+          0x8000 .pio/build/esp32dev/partitions.bin \
+          0x10000 .pio/build/esp32dev/firmware.bin \
+          0x290000 .pio/build/esp32dev/spiffs.bin
+
+    - name: Prepare OTA firmware
+      run: |
+        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_ota.bin
+    
+    - name: Get version from tag
+      id: get_version
+      run: |
+        if [ -n "$GITEA_REF" ]; then
+          echo "VERSION=${GITEA_REF#refs/tags/v}" >> $GITEA_OUTPUT
+        else
+          echo "VERSION=${GITHUB_REF#refs/tags/v}" >> $GITHUB_OUTPUT
+        fi
+      
+    - name: Read CHANGELOG.md
+      id: changelog
+      run: |
+        VERSION=${{ steps.get_version.outputs.VERSION }}
+        CHANGELOG=$(awk "/## \\[$VERSION\\]/{p=1;print;next} /## \\[/{p=0} p" CHANGELOG.md)
+        if [ -n "$GITEA_OUTPUT" ]; then
+          echo "CHANGES<<EOF" >> $GITEA_OUTPUT
+          echo "$CHANGELOG" >> $GITEA_OUTPUT
+          echo "EOF" >> $GITEA_OUTPUT
+        else
+          echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
+          echo "$CHANGELOG" >> $GITHUB_OUTPUT
+          echo "EOF" >> $GITHUB_OUTPUT
+        fi
+    
+    - name: Upload artifacts
+      uses: actions/upload-artifact@v3
+      with:
+        name: firmware
+        path: |
+          .pio/build/esp32dev/filaman_full.bin
+          .pio/build/esp32dev/filaman_ota.bin

.github/workflows/providers/gitea-release.yml

@@ -1,42 +1,61 @@
 name: Gitea Release
 
 on:
-  workflow_call:  # This workflow will only be triggered when called by another workflow
+  workflow_call:
-
+    inputs:
-permissions:
+      gitea_ref_name:
-  contents: write      # Required for creating releases
+        description: 'Gitea ref name'
-  issues: read        # Required for reading changelog
+        required: true
-  pull-requests: read # Required for reading changelog
+        type: string
+      gitea_server_url:
+        description: 'Gitea server URL'
+        required: true
+        type: string
+      gitea_repository:
+        description: 'Gitea repository'
+        required: true
+        type: string
+    secrets:
+      GITEA_TOKEN:
+        required: true
 
 jobs:
-  build:
+  create-release:
     runs-on: ubuntu-latest
-    permissions:
-      contents: write
     steps:
-    - uses: actions/checkout@v4
+    - name: Checkout Repository
+      uses: actions/checkout@v4
 
-    - name: Set up Python
+    - name: Install System Dependencies
-      uses: actions/setup-python@v4
-      with:
-        python-version: '3.x'
-    
-    - name: Install PlatformIO
       run: |
-        python -m pip install --upgrade pip
+        sudo apt-get update
-        pip install --upgrade platformio
+        sudo apt-get install -y python3 python3-venv build-essential curl git
+
+    - name: Set up Python Virtual Environment
+      run: |
+        python3 -m venv venv
+        source venv/bin/activate
+        pip install --upgrade pip
+        pip install platformio esptool
+        
+        echo "Verifying installations:"
+        platformio --version
+        python3 --version
+        esptool.py version
 
     - name: Build Firmware
       run: |
-        pio run -t buildfs  # Build SPIFFS
+        source venv/bin/activate
-        pio run            # Build firmware
+        echo "Building SPIFFS..."
+        platformio run -t buildfs
         
-    - name: Install esptool
+        echo "Building firmware..."
-      run: |
+        platformio run
-        pip install esptool
 
-    - name: Merge firmware and SPIFFS
+    - name: Create Release Files
       run: |
+        source venv/bin/activate
+        echo "Creating release files..."
         esptool.py --chip esp32 merge_bin \
           --flash_mode dio \
           --flash_freq 40m \
@@ -47,55 +66,52 @@ jobs:
           0x10000 .pio/build/esp32dev/firmware.bin \
           0x290000 .pio/build/esp32dev/spiffs.bin
         
-    - name: Prepare OTA firmware
-      run: |
         cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_ota.bin
 
-    - name: Get version from tag
-      id: get_version
-      run: echo "VERSION=${GITHUB_REF#refs/tags/v}" >> $GITHUB_OUTPUT
-      
-    - name: Read CHANGELOG.md
-      id: changelog
-      run: |
-        CHANGELOG=$(awk "/## \\[${{ steps.get_version.outputs.VERSION }}\\]/{p=1;print;next} /## \\[/{p=0} p" CHANGELOG.md)
-        echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
-        echo "$CHANGELOG" >> $GITHUB_OUTPUT
-        echo "EOF" >> $GITHUB_OUTPUT
-    
     - name: Create Release
       env:
-        GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }}
+        TOKEN: ${{ secrets.GITEA_TOKEN }}
-        GITEA_API_URL: ${{ secrets.GITEA_API_URL }}
+        GITEA_REF_NAME: ${{ inputs.gitea_ref_name }}
-        GITEA_REPOSITORY: ${{ secrets.GITEA_REPOSITORY }}
+        GITEA_SERVER_URL: ${{ inputs.gitea_server_url }}
+        GITEA_REPOSITORY: ${{ inputs.gitea_repository }}
       run: |
-        # Create release using Gitea API
+        echo "Debug environment:"
-        RESPONSE=$(curl -X POST \
+        echo "GITEA_REF_NAME: ${GITEA_REF_NAME}"
-        -H "Authorization: token ${GITEA_TOKEN}" \
+        echo "GITEA_SERVER_URL: ${GITEA_SERVER_URL}"
-        -H "Content-Type: application/json" \
+        echo "GITEA_REPOSITORY: ${GITEA_REPOSITORY}"
-        -H "accept: application/json" \
-        "${GITEA_API_URL}/repos/${GITEA_REPOSITORY}/releases" \
-        -d '{
-            "tag_name": "${{ github.ref_name }}",
-            "name": "Release ${{ steps.get_version.outputs.VERSION }}",
-            "body": "${{ steps.changelog.outputs.CHANGES }}",
-            "draft": false,
-            "prerelease": false
-        }')
         
-        # Extract release ID from response
+        TAG="${GITEA_REF_NAME}"
-        RELEASE_ID=$(echo $RESPONSE | jq -r .id)
+        API_URL="${GITEA_SERVER_URL}/api/v1"
+        REPO="${GITEA_REPOSITORY}"
         
-        # Upload full firmware
+        echo "Creating release for ${TAG} on ${REPO}..."
-        curl -X POST \
-        -H "Authorization: token ${GITEA_TOKEN}" \
-        -H "Content-Type: application/octet-stream" \
-        "${GITEA_API_URL}/repos/${GITEA_REPOSITORY}/releases/${RELEASE_ID}/assets?name=filaman_full.bin" \
-        --data-binary @.pio/build/esp32dev/filaman_full.bin
         
-        # Upload OTA firmware
+        # Create release
-        curl -X POST \
+        RESPONSE=$(curl -k -s \
-        -H "Authorization: token ${GITEA_TOKEN}" \
+          -X POST \
-        -H "Content-Type: application/octet-stream" \
+          -H "Authorization: token ${TOKEN}" \
-        "${GITEA_API_URL}/repos/${GITEA_REPOSITORY}/releases/${RELEASE_ID}/assets?name=filaman_ota.bin" \
+          -H "Content-Type: application/json" \
-        --data-binary @.pio/build/esp32dev/filaman_ota.bin
+          -d "{\"tag_name\":\"${TAG}\",\"name\":\"Release ${TAG}\"}" \
+          "${API_URL}/repos/${REPO}/releases")
+        
+        RELEASE_ID=$(echo "$RESPONSE" | grep -o '"id":[0-9]*' | cut -d':' -f2 | head -n1)
+        UPLOAD_URL=$(echo "$RESPONSE" | grep -o '"upload_url":"[^"]*' | cut -d':' -f2- | tr -d '"')
+        
+        if [ -n "$RELEASE_ID" ]; then
+          echo "Release created with ID: $RELEASE_ID"
+          
+          # Upload files
+          for file in "filaman_full.bin" "filaman_ota.bin"; do
+            echo "Uploading $file..."
+            curl -k -s \
+              -X POST \
+              -H "Authorization: token ${TOKEN}" \
+              -H "Content-Type: application/octet-stream" \
+              --data-binary "@.pio/build/esp32dev/$file" \
+              "${UPLOAD_URL}?name=$file"
+          done
+        else
+          echo "Failed to create release. Response:"
+          echo "$RESPONSE"
+          exit 1
+        fi

.github/workflows/providers/github-release.yml

@@ -1,18 +1,13 @@
 name: GitHub Release
 
 on:
-  workflow_call:  # This workflow will only be triggered when called by another workflow
+  workflow_call:
-
-permissions:
-  contents: write      # Required for creating releases
-  issues: read        # Required for reading changelog
-  pull-requests: read # Required for reading changelog
 
 jobs:
-  build:
+  create-release:
     runs-on: ubuntu-latest
     permissions:
-      contents: write # Required for creating releases at job level
+      contents: write
     steps:
     - uses: actions/checkout@v4
     
@@ -49,35 +44,28 @@ jobs:
 
     - name: Prepare OTA firmware
       run: |
-        # Use PlatformIO to create a proper OTA image
         cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_ota.bin
     
     - name: Get version from tag
       id: get_version
-      run: echo "VERSION=${GITHUB_REF#refs/tags/v}" >> $GITHUB_OUTPUT
+      run: |
+        echo "VERSION=${GITHUB_REF#refs/tags/v}" >> $GITHUB_OUTPUT
       
     - name: Read CHANGELOG.md
       id: changelog
       run: |
-        CHANGELOG=$(awk "/## \\[${{ steps.get_version.outputs.VERSION }}\\]/{p=1;print;next} /## \\[/{p=0} p" CHANGELOG.md)
+        VERSION=${{ steps.get_version.outputs.VERSION }}
+        CHANGELOG=$(awk "/## \\[$VERSION\\]/{p=1;print;next} /## \\[/{p=0} p" CHANGELOG.md)
         echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
         echo "$CHANGELOG" >> $GITHUB_OUTPUT
         echo "EOF" >> $GITHUB_OUTPUT
 
-    - name: Install and Configure GitHub CLI
+    - name: Create GitHub Release
-      run: |
-        curl -fsSL https://cli.github.com/packages/githubcli-archive-keyring.gpg | sudo dd of=/usr/share/keyrings/githubcli-archive-keyring.gpg \
-        && sudo chmod go+r /usr/share/keyrings/githubcli-archive-keyring.gpg \
-        && echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/githubcli-archive-keyring.gpg] https://cli.github.com/packages stable main" | sudo tee /etc/apt/sources.list.d/github-cli.list > /dev/null \
-        && sudo apt update \
-        && sudo apt install gh -y
-        
-    - name: Create Release with GitHub CLI
       env:
-        GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        GH_TOKEN: ${{ github.token }}
       run: |
         gh release create "${{ github.ref_name }}" \
           --title "Release ${{ steps.get_version.outputs.VERSION }}" \
           --notes "${{ steps.changelog.outputs.CHANGES }}" \
-          ".pio/build/esp32dev/filaman_full.bin#filaman_full.bin" \
+          .pio/build/esp32dev/filaman_full.bin \
-          ".pio/build/esp32dev/filaman_ota.bin#filaman_ota.bin"
+          .pio/build/esp32dev/filaman_ota.bin

.github/workflows/release.yml

@@ -1,4 +1,4 @@
-name: Release
+name: Release Workflow
 
 on:
   push:
@@ -6,126 +6,65 @@ on:
       - 'v*'
 
 jobs:
-  release:
+  route:
+    runs-on: ubuntu-latest
+    outputs:
+      provider: ${{ steps.provider.outputs.provider }}
+      gitea_ref_name: ${{ steps.provider.outputs.gitea_ref_name }}
+      gitea_server_url: ${{ steps.provider.outputs.gitea_server_url }}
+      gitea_repository: ${{ steps.provider.outputs.gitea_repository }}
+    steps:
+      - name: Checkout Repository
+        uses: actions/checkout@v3
+
+      - name: Debug Environment
+        run: |
+          echo "CI Environment Details:"
+          echo "GITHUB_ACTIONS=${GITHUB_ACTIONS:-not set}"
+          echo "GITEA_ACTIONS=${GITEA_ACTIONS:-not set}"
+          echo "GITEA_REPOSITORY=${GITEA_REPOSITORY:-not set}"
+          echo "GITEA_SERVER_URL=${GITEA_SERVER_URL:-not set}"
+          echo "RUNNER_NAME=${RUNNER_NAME:-not set}"
+
+      - name: Determine CI Provider
+        id: provider
+        shell: bash
+        run: |
+          if [ -n "${GITEA_ACTIONS}" ] || [ -n "${GITEA_REPOSITORY}" ] || [[ "${RUNNER_NAME}" == *"gitea"* ]]; then
+            echo "provider=gitea" >> "$GITHUB_OUTPUT"
+            echo "gitea_ref_name=${GITHUB_REF_NAME}" >> "$GITHUB_OUTPUT"
+            echo "gitea_server_url=${GITHUB_SERVER_URL}" >> "$GITHUB_OUTPUT"
+            echo "gitea_repository=${GITHUB_REPOSITORY}" >> "$GITHUB_OUTPUT"
+          elif [ "${GITHUB_ACTIONS}" = "true" ]; then
+            echo "provider=github" >> "$GITHUB_OUTPUT"
+          else
+            echo "provider=unknown" >> "$GITHUB_OUTPUT"
+          fi
+
+  verify-provider:
+    needs: route
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v4
+      - name: Echo detected provider
-      
-      - name: Set up Python
-        uses: actions/setup-python@v4
-        with:
-          python-version: '3.x'
-    
-      - name: Install PlatformIO
         run: |
-          python -m pip install --upgrade pip
+          echo "Detected CI Provider: ${{ needs.route.outputs.provider }}"
-          pip install --upgrade platformio
+          if [ "${{ needs.route.outputs.provider }}" = "unknown" ]; then
-    
+            echo "::error::Failed to detect CI provider!"
-      - name: Build Firmware
+            exit 1
-        run: |
-          pio run -t buildfs  # Build SPIFFS
-          pio run            # Build firmware
-        
-      - name: Install esptool
-        run: |
-          pip install esptool
-        
-      - name: Merge firmware and SPIFFS
-        run: |
-          esptool.py --chip esp32 merge_bin \
-            --flash_mode dio \
-            --flash_freq 40m \
-            --flash_size 4MB \
-            -o .pio/build/esp32dev/filaman_full.bin \
-            0x1000 .pio/build/esp32dev/bootloader.bin \
-            0x8000 .pio/build/esp32dev/partitions.bin \
-            0x10000 .pio/build/esp32dev/firmware.bin \
-            0x290000 .pio/build/esp32dev/spiffs.bin
-
-      - name: Prepare OTA firmware
-        run: |
-          cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_ota.bin
-      
-      - name: Get version from tag
-        id: get_version
-        run: echo "VERSION=${GITHUB_REF#refs/tags/v}" >> $GITHUB_OUTPUT
-      
-      - name: Read CHANGELOG.md
-        id: changelog
-        run: |
-          CHANGELOG=$(awk "/## \\[${{ steps.get_version.outputs.VERSION }}\\]/{p=1;print;next} /## \\[/{p=0} p" CHANGELOG.md)
-          echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
-          echo "$CHANGELOG" >> $GITHUB_OUTPUT
-          echo "EOF" >> $GITHUB_OUTPUT
-
-      - name: Install jq
-        if: ${{ github.server_url != 'https://github.com' }}
-        run: sudo apt-get install -y jq
-
-      - name: Determine and run release process
-        env:
-          GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }}
-          GITEA_API_URL: ${{ secrets.GITEA_API_URL }}
-          GITEA_REPOSITORY: ${{ secrets.GITEA_REPOSITORY }}
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        run: |
-          if [[ "$GITHUB_SERVER_URL" == "https://github.com" ]]; then
-            echo "Creating GitHub Release..."
-            curl -X POST \
-              -H "Authorization: token ${GITHUB_TOKEN}" \
-              -H "Accept: application/vnd.github.v3+json" \
-              https://api.github.com/repos/${{ github.repository }}/releases \
-              -d '{
-                "tag_name": "${{ github.ref_name }}",
-                "name": "Release ${{ steps.get_version.outputs.VERSION }}",
-                "body": "${{ steps.changelog.outputs.CHANGES }}",
-                "draft": false,
-                "prerelease": false
-              }' > release.json
-            
-            UPLOAD_URL=$(jq -r .upload_url release.json | sed 's/{?name,label}//')
-            
-            # Upload full firmware
-            curl -X POST \
-              -H "Authorization: token ${GITHUB_TOKEN}" \
-              -H "Content-Type: application/octet-stream" \
-              "${UPLOAD_URL}?name=filaman_full.bin" \
-              --data-binary @.pio/build/esp32dev/filaman_full.bin
-            
-            # Upload OTA firmware
-            curl -X POST \
-              -H "Authorization: token ${GITHUB_TOKEN}" \
-              -H "Content-Type: application/octet-stream" \
-              "${UPLOAD_URL}?name=filaman_ota.bin" \
-              --data-binary @.pio/build/esp32dev/filaman_ota.bin
-          else
-            echo "Creating Gitea Release..."
-            RESPONSE=$(curl -X POST \
-              -H "Authorization: token ${GITEA_TOKEN}" \
-              -H "Content-Type: application/json" \
-              -H "accept: application/json" \
-              "${GITEA_API_URL}/repos/${GITEA_REPOSITORY}/releases" \
-              -d '{
-                "tag_name": "${{ github.ref_name }}",
-                "name": "Release ${{ steps.get_version.outputs.VERSION }}",
-                "body": "${{ steps.changelog.outputs.CHANGES }}",
-                "draft": false,
-                "prerelease": false
-              }')
-            
-            RELEASE_ID=$(echo $RESPONSE | jq -r .id)
-            
-            # Upload full firmware
-            curl -X POST \
-              -H "Authorization: token ${GITEA_TOKEN}" \
-              -H "Content-Type: application/octet-stream" \
-              "${GITEA_API_URL}/repos/${GITEA_REPOSITORY}/releases/${RELEASE_ID}/assets?name=filaman_full.bin" \
-              --data-binary @.pio/build/esp32dev/filaman_full.bin
-            
-            # Upload OTA firmware
-            curl -X POST \
-              -H "Authorization: token ${GITEA_TOKEN}" \
-              -H "Content-Type: application/octet-stream" \
-              "${GITEA_API_URL}/repos/${GITEA_REPOSITORY}/releases/${RELEASE_ID}/assets?name=filaman_ota.bin" \
-              --data-binary @.pio/build/esp32dev/filaman_ota.bin
           fi
+
+  github-release:
+    needs: [route, verify-provider]
+    if: needs.route.outputs.provider == 'github'
+    uses: ./.github/workflows/providers/github-release.yml
+
+  gitea-release:
+    needs: [route, verify-provider]
+    if: needs.route.outputs.provider == 'gitea'
+    uses: ./.github/workflows/providers/gitea-release.yml
+    with:
+      gitea_ref_name: ${{ needs.route.outputs.gitea_ref_name }}
+      gitea_server_url: ${{ needs.route.outputs.gitea_server_url }}
+      gitea_repository: ${{ needs.route.outputs.gitea_repository }}
+    secrets:
+      GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }}

CHANGELOG.md

@@ -1,5 +1,185 @@
 # Changelog
 
+## [1.2.45] - 2025-02-19
+### Added
+- update Gitea release workflow to use dynamic upload URL and increment version to 1.2.45
+
+
+## [1.2.44] - 2025-02-19
+### Added
+- update Gitea release workflow to include additional outputs and increment version to 1.2.44
+
+
+## [1.2.43] - 2025-02-19
+### Added
+- update Gitea release workflow by removing unnecessary outputs and increment version to 1.2.43
+
+
+## [1.2.42] - 2025-02-19
+### Added
+- update Gitea release workflow to include additional outputs and increment version to 1.2.42
+
+
+## [1.2.41] - 2025-02-19
+### Added
+- update Gitea release workflow debug output and increment version to 1.2.41
+
+
+## [1.2.40] - 2025-02-19
+### Added
+- add inputs for Gitea release workflow and increment version to 1.2.40
+
+
+## [1.2.39] - 2025-02-19
+### Added
+- update Gitea release workflow to use Python virtual environment and increment version to 1.2.39
+
+
+## [1.2.38] - 2025-02-19
+### Added
+- update Gitea release workflow and increment version to 1.2.38
+
+
+## [1.2.37] - 2025-02-19
+### Added
+- update Gitea release workflow and increment version to 1.2.37
+
+
+## [1.2.36] - 2025-02-19
+### Added
+- update Gitea release workflow and increment version to 1.2.36
+
+
+## [1.2.35] - 2025-02-19
+### Added
+- update Gitea release workflow and version to 1.2.35
+
+
+## [1.2.34] - 2025-02-19
+### Added
+- update version to 1.2.34 and enhance Gitea and GitHub release workflows
+
+
+## [1.2.33] - 2025-02-19
+### Added
+- update version to 1.2.33 and refactor release workflows for Gitea and GitHub
+
+
+## [1.2.32] - 2025-02-19
+### Added
+- update version to 1.2.32 and adjust workflow dependencies for GitHub and Gitea releases
+
+
+## [1.2.31] - 2025-02-19
+### Added
+- update version to 1.2.31
+
+
+## [1.2.30] - 2025-02-19
+### Added
+- update version to 1.2.30 and enhance release workflows for Gitea and GitHub with improved artifact handling and changelog integration
+
+
+## [1.2.29] - 2025-02-19
+### Added
+- update version to 1.2.29 and enhance Gitea release workflow with improved error handling and debugging
+
+
+## [1.2.28] - 2025-02-19
+### Added
+- add build and release workflows for Gitea and GitHub, increment version to 1.2.28
+
+
+## [1.2.27] - 2025-02-19
+### Added
+- enhance CI workflows with provider detection and update version to 1.2.27
+
+
+## [1.2.26] - 2025-02-19
+### Added
+- update release workflows for Gitea and GitHub, increment version to 1.2.26
+
+
+## [1.2.25] - 2025-02-19
+### Added
+- update GitHub release workflows and increment version to 1.2.25
+
+
+## [1.2.24] - 2025-02-19
+### Added
+- update GitHub release workflow and increment version to 1.2.24
+
+
+## [1.2.23] - 2025-02-19
+### Added
+- update Gitea release workflow and increment version to 1.2.23
+
+
+## [1.2.22] - 2025-02-19
+### Added
+- update Gitea runner configuration and increment version to 1.2.22
+
+
+## [1.2.21] - 2025-02-19
+### Added
+- update Gitea release condition and increment version to 1.2.21
+
+
+## [1.2.20] - 2025-02-19
+### Added
+- update release workflows for GitHub and Gitea, increment version to 1.2.20
+
+
+## [1.2.19] - 2025-02-19
+### Added
+- add Gitea and GitHub release workflows for version 1.2.19
+
+
+## [1.2.18] - 2025-02-19
+### Added
+- remove Gitea and GitHub release workflows and increment version to 1.2.18
+
+
+## [1.2.17] - 2025-02-19
+### Added
+- update Gitea release workflow for version 1.2.17 and improve job structure
+
+
+## [1.2.16] - 2025-02-19
+### Added
+- update Gitea release workflow and increment version to 1.2.16
+
+
+## [1.2.15] - 2025-02-19
+### Added
+- update version to 1.2.15 and clean up Gitea release workflow
+
+
+## [1.2.14] - 2025-02-19
+### Added
+- update version to 1.2.14 and refactor release workflows for improved GitHub and Gitea support
+
+
+## [1.2.13] - 2025-02-19
+### Added
+- update version to 1.2.13 and enhance release workflow with Python setup and Gitea support
+
+
+## [1.2.12] - 2025-02-19
+### Added
+- update version to 1.2.12 and refactor release workflows for improved provider detection and execution
+
+
+## [1.2.11] - 2025-02-18
+### Added
+- update version to 1.2.11 and enhance GitHub and Gitea release workflows with input validation and improved error handling
+
+
+## [1.2.10] - 2025-02-18
+### Added
+- enhance Gitea release workflow with API connection verification and URL validation; update version to 1.2.10
+
+
 ## [1.2.9] - 2025-02-18
 ### Added
 - update version to 1.2.9 in platformio.ini

README.md

@@ -124,6 +124,24 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
     - Configure WiFi settings through the captive portal.
     - Access the web interface at `http://filaman.local` or the IP address.
 
+## GitHub Actions Configuration
+
+### Required Secrets for Gitea Releases
+
+When using Gitea as your repository host, you need to configure the following secrets in your repository:
+
+- `GITEA_API_URL`: The base URL of your Gitea instance, including protocol (e.g., `https://git.example.com`)
+- `GITEA_TOKEN`: Your Gitea access token with permissions to create releases
+- `GITEA_REPOSITORY`: The repository name in format `owner/repo` (e.g., `username/filaman`)
+
+Example values:
+```
+GITEA_API_URL=https://git.example.com
+GITEA_TOKEN=abcdef1234567890
+GITEA_REPOSITORY=username/filaman
+```
+
+Make sure to set these secrets in your repository settings under Settings > Secrets and Variables > Actions.
 
 ## Documentation
 

html/header.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.4</span></h1>
+                <h1>FilaMan<span class="version">v1.2.29</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/index.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.4</span></h1>
+                <h1>FilaMan<span class="version">v1.2.29</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/rfid.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.4</span></h1>
+                <h1>FilaMan<span class="version">v1.2.29</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/spoolman.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.4</span></h1>
+                <h1>FilaMan<span class="version">v1.2.29</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/upgrade.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.4</span></h1>
+                <h1>FilaMan<span class="version">v1.2.29</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/waage.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.4</span></h1>
+                <h1>FilaMan<span class="version">v1.2.29</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/wifi.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.4</span></h1>
+                <h1>FilaMan<span class="version">v1.2.29</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

platformio.ini

@@ -9,7 +9,7 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [common]
-version = "1.2.9"
+version = "1.2.45"
 
 [env:esp32dev]
 platform = espressif32