docs: update changelog for version 1.2.101

.github/workflows/providers/gitea-release.yml

@@ -3,9 +3,6 @@ name: Gitea Release
 on:
   workflow_call:
     inputs:
-      gitea_ref_name:
-        required: true
-        type: string
       gitea_server_url:
         required: true
         type: string
@@ -37,52 +34,106 @@ jobs:
         sudo apt-get update
         sudo apt-get install xxd
     
+    - name: Check for SPIFFS changes
+      id: check_spiffs
+      run: |
+        git fetch --unshallow || true
+        CHANGED_FILES=$(git diff --name-only HEAD^..HEAD)
+        if echo "$CHANGED_FILES" | grep -q "^data/\|^html/"; then
+          echo "SPIFFS_CHANGED=true" >> $GITHUB_OUTPUT
+        else
+          echo "SPIFFS_CHANGED=false" >> $GITHUB_OUTPUT
+        fi
+    
+    - name: Check for Data changes
+      id: check_data
+      run: |
+        git fetch --unshallow || true
+        CHANGED_FILES=$(git diff --name-only HEAD^..HEAD)
+        if echo "$CHANGED_FILES" | grep -q "^data/"; then
+          echo "DATA_CHANGED=true" >> $GITHUB_OUTPUT
+        else
+          echo "DATA_CHANGED=false" >> $GITHUB_OUTPUT
+        fi
+    
+    - name: Get version from platformio.ini
+      id: get_version
+      run: |
+        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
+        echo "VERSION=$VERSION" >> $GITHUB_OUTPUT
+
     - name: Build Firmware
       run: |
-        pio run -e esp32dev -t buildfs  # Build SPIFFS
+        VERSION=${{ steps.get_version.outputs.VERSION }}
-        pio run -e esp32dev            # Build firmware
+        
-        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman.bin
+        # Always build firmware and SPIFFS
-        cp .pio/build/esp32dev/spiffs.bin .pio/build/esp32dev/filaman_spiffs.bin
+        echo "Building firmware and SPIFFS..."
+        pio run -e esp32dev
+        pio run -t buildfs
+        
+        # Copy firmware binary
+        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_${VERSION}.bin
+        
+        # Always create SPIFFS binary
+        cp .pio/build/esp32dev/spiffs.bin .pio/build/esp32dev/webpage_${VERSION}.bin
+        
+        # Create full binary (always)
+        (cd .pio/build/esp32dev && 
+        esptool.py --chip esp32 merge_bin 
+          --fill-flash-size 4MB 
+          --flash_mode dio 
+          --flash_freq 40m 
+          --flash_size 4MB 
+          -o filaman_full_${VERSION}.bin 
+          0x0000 bootloader.bin 
+          0x8000 partitions.bin 
+          0x10000 firmware.bin 
+          0x390000 spiffs.bin)
+        
+        # Verify file sizes
+        echo "File sizes:"
+        (cd .pio/build/esp32dev && ls -lh *.bin)
         
     - name: Prepare binaries
       run: |
-        cd .pio/build/esp32dev
+        VERSION=${{ steps.get_version.outputs.VERSION }}
         
-        # Create OTA binary (already has correct magic byte)
+        # Create full binary only if SPIFFS changed
-        cp firmware.bin filaman.bin
+        if [[ "${{ steps.check_spiffs.outputs.SPIFFS_CHANGED }}" == "true" ]]; then
-        
+          echo "Creating full binary..."
-        # Create a magic byte prepended binary for the bootloader
+          cd .pio/build/esp32dev && \
-        echo -ne '\xE9' > bootloader_with_magic.bin
-        cat bootloader.bin >> bootloader_with_magic.bin
-        
-        echo "Creating full binary with magic byte..."
           esptool.py --chip esp32 merge_bin \
             --fill-flash-size 4MB \
             --flash_mode dio \
             --flash_freq 40m \
             --flash_size 4MB \
-          -o filaman.bin \
+            -o filaman_full_${VERSION}.bin \
-          0x0000 bootloader_with_magic.bin \
+            0x0000 bootloader.bin \
             0x8000 partitions.bin \
             0x10000 firmware.bin \
             0x390000 spiffs.bin
-        
+        fi
-        # Verify magic bytes
-        echo "Checking magic bytes:"
-        echo "Full binary first bytes:"
-        xxd -l 16 filaman.bin
         
         # Verify file sizes
         echo "File sizes:"
-        ls -lh *.bin
+        cd .pio/build/esp32dev && ls -lh *.bin
+
+    - name: Read CHANGELOG.md
+      id: changelog
+      run: |
+        VERSION=${{ steps.get_version.outputs.VERSION }}
+        CHANGELOG=$(awk "/## \\[$VERSION\\]/{p=1;print;next} /## \\[/{p=0} p" CHANGELOG.md)
+        echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
+        echo "$CHANGELOG" >> $GITHUB_OUTPUT
+        echo "EOF" >> $GITHUB_OUTPUT
         
     - name: Create Release
       env:
         TOKEN: ${{ secrets.GITEA_TOKEN }}
       run: |
-        TAG="${{ inputs.gitea_ref_name }}"
         API_URL="${{ inputs.gitea_server_url }}/api/v1"
         REPO="${{ inputs.gitea_repository }}"
+        VERSION=${{ steps.get_version.outputs.VERSION }}
         
         # Create release
         RESPONSE=$(curl -k -s \
@@ -90,8 +141,8 @@ jobs:
           -H "Authorization: token ${TOKEN}" \
           -H "Content-Type: application/json" \
           -d "{
-            \"tag_name\":\"${TAG}\",
+            \"tag_name\":\"v${VERSION}\",
-            \"name\":\"Release ${TAG}\",
+            \"name\":\"Release ${VERSION}\",
             \"body\":\"${{ steps.changelog.outputs.CHANGES }}\"
           }" \
           "${API_URL}/repos/${REPO}/releases")
@@ -101,17 +152,29 @@ jobs:
         if [ -n "$RELEASE_ID" ]; then
           echo "Release created with ID: $RELEASE_ID"
           
-          # Upload binaries
+          # Always upload firmware and full binary
-          cd .pio/build/esp32dev
+          for file in filaman_${VERSION}.bin filaman_full_${VERSION}.bin; do
-          for file in filaman.bin; do
+            if [ -f ".pio/build/esp32dev/$file" ]; then
               echo "Uploading $file..."
               curl -k -s \
                 -X POST \
                 -H "Authorization: token ${TOKEN}" \
                 -H "Content-Type: application/octet-stream" \
-              --data-binary "@$file" \
+                --data-binary "@.pio/build/esp32dev/$file" \
                 "${API_URL}/repos/${REPO}/releases/${RELEASE_ID}/assets?name=$file"
+            fi
           done
+          
+          # Upload SPIFFS binary only if it exists (data changes)
+          if [ -f ".pio/build/esp32dev/webpage_${VERSION}.bin" ]; then
+            echo "Uploading webpage binary..."
+            curl -k -s \
+              -X POST \
+              -H "Authorization: token ${TOKEN}" \
+              -H "Content-Type: application/octet-stream" \
+              --data-binary "@.pio/build/esp32dev/webpage_${VERSION}.bin" \
+              "${API_URL}/repos/${REPO}/releases/${RELEASE_ID}/assets?name=webpage_${VERSION}.bin"
+          fi
         else
           echo "Failed to create release. Response:"
           echo "$RESPONSE"

.github/workflows/providers/github-release.yml

@@ -26,49 +26,65 @@ jobs:
         sudo apt-get update
         sudo apt-get install xxd
     
+    - name: Check for Data changes
+      id: check_data
+      run: |
+        git fetch --unshallow || true
+        CHANGED_FILES=$(git diff --name-only HEAD^..HEAD)
+        if echo "$CHANGED_FILES" | grep -q "^data/"; then
+          echo "DATA_CHANGED=true" >> $GITHUB_OUTPUT
+        else
+          echo "DATA_CHANGED=false" >> $GITHUB_OUTPUT
+        fi
+
+    - name: Check for SPIFFS changes
+      id: check_spiffs
+      run: |
+        git fetch --unshallow || true
+        CHANGED_FILES=$(git diff --name-only HEAD^..HEAD)
+        if echo "$CHANGED_FILES" | grep -q "^data/\|^html/"; then
+          echo "SPIFFS_CHANGED=true" >> $GITHUB_OUTPUT
+        else
+          echo "SPIFFS_CHANGED=false" >> $GITHUB_OUTPUT
+        fi
+    
     - name: Build Firmware
       run: |
-        pio run -e esp32dev -t buildfs  # Build SPIFFS
+        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
-        pio run -e esp32dev            # Build firmware
-        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman.bin
-        cp .pio/build/esp32dev/spiffs.bin .pio/build/esp32dev/filaman_spiffs.bin
         
-    - name: Prepare binaries
+        # Always build firmware and SPIFFS
-      run: |
+        echo "Building firmware and SPIFFS..."
-        cd .pio/build/esp32dev
+        pio run -e esp32dev
+        pio run -t buildfs
         
-        # Create OTA binary (already has correct magic byte)
+        # Copy firmware binary
-        cp firmware.bin filaman.bin
+        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_${VERSION}.bin
         
-        # Create a magic byte prepended binary for the bootloader
+        # Always create SPIFFS binary
-        echo -ne '\xE9' > bootloader_with_magic.bin
+        cp .pio/build/esp32dev/spiffs.bin .pio.build/esp32dev/webpage_${VERSION}.bin
-        cat bootloader.bin >> bootloader_with_magic.bin
         
-        echo "Creating full binary with magic byte..."
+        # Create full binary (always)
+        (cd .pio/build/esp32dev && \
         esptool.py --chip esp32 merge_bin \
           --fill-flash-size 4MB \
           --flash_mode dio \
           --flash_freq 40m \
           --flash_size 4MB \
-          -o filaman.bin \
+          -o filaman_full_${VERSION}.bin \
-          0x0000 bootloader_with_magic.bin \
+          0x0000 bootloader.bin \
           0x8000 partitions.bin \
           0x10000 firmware.bin \
-          0x390000 spiffs.bin
+          0x390000 spiffs.bin)
-        
-        # Verify magic bytes
-        echo "Checking magic bytes:"
-        echo "Full binary first bytes:"
-        xxd -l 16 filaman.bin
         
         # Verify file sizes
         echo "File sizes:"
-        ls -lh *.bin
+        (cd .pio/build/esp32dev && ls -lh *.bin)
     
-    - name: Get version from tag
+    - name: Get version from platformio.ini
       id: get_version
       run: |
-        echo "VERSION=${GITHUB_REF#refs/tags/v}" >> $GITHUB_OUTPUT
+        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
+        echo "VERSION=$VERSION" >> $GITHUB_OUTPUT
       
     - name: Read CHANGELOG.md
       id: changelog
@@ -83,7 +99,33 @@ jobs:
       env:
         GH_TOKEN: ${{ github.token }}
       run: |
-        gh release create "${{ github.ref_name }}" \
+        VERSION=${{ steps.get_version.outputs.VERSION }}
-          --title "Release ${{ steps.get_version.outputs.VERSION }}" \
+        
+        # Create release with available files
+        cd .pio/build/esp32dev
+        FILES_TO_UPLOAD=""
+        
+        # Always add firmware
+        if [ -f "filaman_${VERSION}.bin" ]; then
+          FILES_TO_UPLOAD="$FILES_TO_UPLOAD filaman_${VERSION}.bin"
+        fi
+        
+        # Add SPIFFS and full binary only if they exist
+        if [ -f "webpage_${VERSION}.bin" ]; then
+          FILES_TO_UPLOAD="$FILES_TO_UPLOAD webpage_${VERSION}.bin"
+        fi
+        
+        if [ -f "filaman_full_${VERSION}.bin" ]; then
+          FILES_TO_UPLOAD="$FILES_TO_UPLOAD filaman_full_${VERSION}.bin"
+        fi
+        
+        # Create release with available files
+        if [ -n "$FILES_TO_UPLOAD" ]; then
+          gh release create "v${VERSION}" \
+            --title "Release ${VERSION}" \
             --notes "${{ steps.changelog.outputs.CHANGES }}" \
-          .pio/build/esp32dev/filaman.bin
+            $FILES_TO_UPLOAD
+        else
+          echo "Error: No files found to upload"
+          exit 1
+        fi

CHANGELOG.md

@@ -1,5 +1,91 @@
 # Changelog
 
+## [1.2.101] - 2025-02-21
+### Changed
+- update webpages for version v1.2.101
+- always create SPIFFS binary in release workflows
+- migrate calibration value storage from EEPROM to NVS
+
+
+## [1.2.100] - 2025-02-21
+### Changed
+- update webpages for version v1.2.100
+- remove OTA handling and JSON backup/restore functions
+
+
+## [1.2.99] - 2025-02-21
+### Added
+- add SPIFFS change detection and binary copying to release workflows
+- add backup and restore functions for JSON configurations during OTA updates
+
+### Changed
+- update webpages for version v1.2.99
+- update JSON field type checks from JsonObject to String for improved validation
+- update JSON handling in API and Bambu modules for improved object management
+- update platformio.ini dependencies and improve version handling in website.cpp
+- update Cache-Control header to reflect a 1-week duration
+- remove version definition from website.cpp
+- optimize WiFi and WebSocket settings; enhance TCP/IP stack configuration
+- update upgrade page title and heading; adjust cache control duration
+
+
+## [1.2.98] - 2025-02-21
+### Changed
+- update webpages for version v1.2.98
+
+
+## [1.2.97] - 2025-02-21
+### Changed
+- update webpages for version v1.2.97
+- streamline Gitea and GitHub release workflows to check for data changes and update binary handling
+
+
+## [1.2.96] - 2025-02-21
+### Added
+- add SPIFFS build step to Gitea and GitHub release workflows
+
+### Changed
+- update webpages for version v1.2.96
+
+
+## [1.2.95] - 2025-02-21
+### Added
+- enhance update process with separate forms for firmware and webpage uploads, including validation and improved UI
+- add API endpoint for version retrieval and update HTML to display dynamic version
+
+### Changed
+- update webpages for version v1.2.95
+- bump version to 1.2.94 in platformio.ini
+
+
+## [1.2.91] - 2025-02-20
+### Added
+- add file existence checks before uploading binaries in release workflows
+
+### Changed
+- update webpages for version v1.2.91
+
+
+## [1.2.90] - 2025-02-20
+### Changed
+- update webpages for version v1.2.90
+- update Gitea and GitHub release workflows to include SPIFFS directory creation and firmware copying
+
+
+## [1.2.89] - 2025-02-20
+### Changed
+- update webpages for version v1.2.89
+- enhance OTA update process with SPIFFS support and improved error handling
+
+
+## [1.2.88] - 2025-02-20
+### Changed
+- update webpages for version v1.2.88
+
+### Fixed
+- improve OTA update handling and logging for better error reporting
+
+
 ## [1.2.87] - 2025-02-20
 ### Changed
 - update webpages for version v1.2.87

html/header.html

@@ -6,13 +6,24 @@
     <title>FilaMan - Filament Management Tool</title>
     <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
+    <script>
+        fetch('/api/version')
+            .then(response => response.json())
+            .then(data => {
+                const versionSpan = document.querySelector('.version');
+                if (versionSpan) {
+                    versionSpan.textContent = 'v' + data.version;
+                }
+            })
+            .catch(error => console.error('Error fetching version:', error));
+    </script>
 </head>
 <body>
     <div class="navbar">
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.87</span></h1>
+                <h1>FilaMan<span class="version"></span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>
@@ -33,4 +44,6 @@
             <div class="ram-status" id="ramStatus"></div>
         </div>
     </div>
+</body>
+</html>
 

html/index.html

@@ -6,13 +6,24 @@
     <title>FilaMan - Filament Management Tool</title>
     <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
+    <script>
+        fetch('/api/version')
+            .then(response => response.json())
+            .then(data => {
+                const versionSpan = document.querySelector('.version');
+                if (versionSpan) {
+                    versionSpan.textContent = 'v' + data.version;
+                }
+            })
+            .catch(error => console.error('Error fetching version:', error));
+    </script>
 </head>
 <body>
     <div class="navbar">
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.87</span></h1>
+                <h1>FilaMan<span class="version"></span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>
@@ -33,6 +44,8 @@
             <div class="ram-status" id="ramStatus"></div>
         </div>
     </div>
+</body>
+</html>
 
 <!-- head -->
 

html/rfid.html

@@ -6,13 +6,24 @@
     <title>FilaMan - Filament Management Tool</title>
     <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
+    <script>
+        fetch('/api/version')
+            .then(response => response.json())
+            .then(data => {
+                const versionSpan = document.querySelector('.version');
+                if (versionSpan) {
+                    versionSpan.textContent = 'v' + data.version;
+                }
+            })
+            .catch(error => console.error('Error fetching version:', error));
+    </script>
 </head>
 <body>
     <div class="navbar">
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.87</span></h1>
+                <h1>FilaMan<span class="version"></span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>
@@ -33,6 +44,8 @@
             <div class="ram-status" id="ramStatus"></div>
         </div>
     </div>
+</body>
+</html>
 
 <!-- head -->
 

html/spoolman.html

@@ -6,13 +6,24 @@
     <title>FilaMan - Filament Management Tool</title>
     <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
+    <script>
+        fetch('/api/version')
+            .then(response => response.json())
+            .then(data => {
+                const versionSpan = document.querySelector('.version');
+                if (versionSpan) {
+                    versionSpan.textContent = 'v' + data.version;
+                }
+            })
+            .catch(error => console.error('Error fetching version:', error));
+    </script>
 </head>
 <body>
     <div class="navbar">
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.87</span></h1>
+                <h1>FilaMan<span class="version"></span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>
@@ -33,6 +44,8 @@
             <div class="ram-status" id="ramStatus"></div>
         </div>
     </div>
+</body>
+</html>
 
 <!-- head -->
 

html/upgrade.html

@@ -6,13 +6,24 @@
     <title>FilaMan - Filament Management Tool</title>
     <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
+    <script>
+        fetch('/api/version')
+            .then(response => response.json())
+            .then(data => {
+                const versionSpan = document.querySelector('.version');
+                if (versionSpan) {
+                    versionSpan.textContent = 'v' + data.version;
+                }
+            })
+            .catch(error => console.error('Error fetching version:', error));
+    </script>
 </head>
 <body>
     <div class="navbar">
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.87</span></h1>
+                <h1>FilaMan<span class="version"></span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>
@@ -33,6 +44,8 @@
             <div class="ram-status" id="ramStatus"></div>
         </div>
     </div>
+</body>
+</html>
 
 <!-- head -->
     
@@ -40,23 +53,97 @@
         <h1>Firmware Upgrade</h1>
 
         <div class="warning">
-            <strong>Warning:</strong> Please do not turn off or restart the device during the update. 
+            <strong>Warning:</strong> Do not power off the device during update.
-            The device will restart automatically after the update.
         </div>
 
+        <div class="update-options">
+            <div class="update-section">
+                <h2>Firmware Update</h2>
+                <p>Upload a new firmware file (filaman_*.bin)</p>
                 <div class="update-form">
-            <form id="updateForm" enctype='multipart/form-data'>
+                    <form id="firmwareForm" enctype='multipart/form-data' data-type="firmware">
                         <input type='file' name='update' accept='.bin' required>
                         <input type='submit' value='Start Firmware Update'>
                     </form>
                 </div>
+            </div>
 
-        <div class="progress-container">
+            <div class="update-section">
+                <h2>Webpage Update</h2>
+                <p>Upload a new webpage file (webpage_*.bin)</p>
+                <div class="update-form">
+                    <form id="webpageForm" enctype='multipart/form-data' data-type="webpage">
+                        <input type='file' name='update' accept='.bin' required>
+                        <input type='submit' value='Start Webpage Update'>
+                    </form>
+                </div>
+            </div>
+        </div>
+
+        <div class="progress-container" style="display: none;">
             <div class="progress-bar">0%</div>
         </div>
         <div class="status"></div>
     </div>
 
+    <style>
+        .update-options {
+            display: flex;
+            gap: 2rem;
+            margin: 2rem 0;
+        }
+        .update-section {
+            flex: 1;
+            background: #f5f5f5;
+            padding: 1.5rem;
+            border-radius: 8px;
+        }
+        .update-section h2 {
+            margin-top: 0;
+            color: #333;
+        }
+        .update-section p {
+            color: #666;
+            margin-bottom: 1rem;
+        }
+        .progress-container {
+            margin: 20px 0;
+            background: #f0f0f0;
+            border-radius: 4px;
+            overflow: hidden;
+        }
+        .progress-bar {
+            width: 0;
+            height: 20px;
+            background: #4CAF50;
+            transition: width 0.3s ease-in-out;
+            text-align: center;
+            line-height: 20px;
+            color: white;
+        }
+        .status {
+            margin-top: 20px;
+            padding: 10px;
+            border-radius: 4px;
+            display: none;
+        }
+        .status.success {
+            background: #e8f5e9;
+            color: #2e7d32;
+        }
+        .status.error {
+            background: #ffebee;
+            color: #c62828;
+        }
+        .warning {
+            background: #fff3e0;
+            color: #e65100;
+            padding: 15px;
+            border-radius: 4px;
+            margin-bottom: 20px;
+        }
+    </style>
+
     <script>
         // Hide status indicators during update
         const statusContainer = document.querySelector('.status-container');
@@ -64,30 +151,44 @@
             statusContainer.style.display = 'none';
         }
 
-        document.getElementById('updateForm').addEventListener('submit', async (e) => {
-            e.preventDefault();
-            const form = e.target;
-            const file = form.update.files[0];
-            if (!file) {
-                alert('Please select a firmware file.');
-                return;
-            }
-
-            const formData = new FormData();
-            formData.append('update', file);
-
         const progress = document.querySelector('.progress-bar');
         const progressContainer = document.querySelector('.progress-container');
         const status = document.querySelector('.status');
 
+        function handleUpdate(e) {
+            e.preventDefault();
+            const form = e.target;
+            const file = form.update.files[0];
+            const updateType = form.dataset.type;
+
+            if (!file) {
+                alert('Please select a file.');
+                return;
+            }
+
+            // Validate file name pattern
+            if (updateType === 'firmware' && !file.name.startsWith('filaman_')) {
+                alert('Please select a valid firmware file (filaman_*.bin)');
+                return;
+            }
+            if (updateType === 'webpage' && !file.name.startsWith('webpage_')) {
+                alert('Please select a valid webpage file (webpage_*.bin)');
+                return;
+            }
+            
             progressContainer.style.display = 'block';
             status.style.display = 'none';
             status.className = 'status';
-            form.querySelector('input[type=submit]').disabled = true;
+
+            // Reset progress bar
+            progress.style.width = '0%';
+            progress.textContent = '0%';
+
+            // Disable both forms during update
+            document.querySelectorAll('form input[type=submit]').forEach(btn => btn.disabled = true);
 
             const xhr = new XMLHttpRequest();
             xhr.open('POST', '/update', true);
-
             xhr.upload.onprogress = (e) => {
                 if (e.lengthComputable) {
                     const percentComplete = (e.loaded / e.total) * 100;
@@ -130,13 +231,13 @@
                     status.style.display = 'block';
                     
                     if (xhr.status !== 200) {
-                        form.querySelector('input[type=submit]').disabled = false;
+                        document.querySelectorAll('form input[type=submit]').forEach(btn => btn.disabled = false);
                     }
                 } catch (error) {
                     status.textContent = 'Error: ' + error.message;
                     status.classList.add('error');
                     status.style.display = 'block';
-                    form.querySelector('input[type=submit]').disabled = false;
+                    document.querySelectorAll('form input[type=submit]').forEach(btn => btn.disabled = false);
                 }
             };
 
@@ -144,11 +245,16 @@
                 status.textContent = 'Update failed: Network error';
                 status.classList.add('error');
                 status.style.display = 'block';
-                form.querySelector('input[type=submit]').disabled = false;
+                document.querySelectorAll('form input[type=submit]').forEach(btn => btn.disabled = false);
             };
 
+            const formData = new FormData();
+            formData.append('update', file);
             xhr.send(formData);
-        });
+        }
+
+        document.getElementById('firmwareForm').addEventListener('submit', handleUpdate);
+        document.getElementById('webpageForm').addEventListener('submit', handleUpdate);
     </script>
 </body>
 </html>

html/waage.html

@@ -6,13 +6,24 @@
     <title>FilaMan - Filament Management Tool</title>
     <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
+    <script>
+        fetch('/api/version')
+            .then(response => response.json())
+            .then(data => {
+                const versionSpan = document.querySelector('.version');
+                if (versionSpan) {
+                    versionSpan.textContent = 'v' + data.version;
+                }
+            })
+            .catch(error => console.error('Error fetching version:', error));
+    </script>
 </head>
 <body>
     <div class="navbar">
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.87</span></h1>
+                <h1>FilaMan<span class="version"></span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>
@@ -33,6 +44,8 @@
             <div class="ram-status" id="ramStatus"></div>
         </div>
     </div>
+</body>
+</html>
 
 <!-- head -->
 

html/wifi.html

@@ -6,13 +6,24 @@
     <title>FilaMan - Filament Management Tool</title>
     <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
+    <script>
+        fetch('/api/version')
+            .then(response => response.json())
+            .then(data => {
+                const versionSpan = document.querySelector('.version');
+                if (versionSpan) {
+                    versionSpan.textContent = 'v' + data.version;
+                }
+            })
+            .catch(error => console.error('Error fetching version:', error));
+    </script>
 </head>
 <body>
     <div class="navbar">
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.87</span></h1>
+                <h1>FilaMan<span class="version"></span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>
@@ -33,6 +44,8 @@
             <div class="ram-status" id="ramStatus"></div>
         </div>
     </div>
+</body>
+</html>
 
 <!-- head -->
 

partitions.csv

@@ -1,6 +1,6 @@
 # Name,   Type, SubType,    Offset,   Size,     Flags
 nvs,      data, nvs,       0x9000,   0x5000,
 otadata,  data, ota,       0xe000,   0x2000,
-app0,     app,  ota_0,     0x10000,  0x1C0000,
+app0,     app,  ota_0,     0x10000,  0x180000,
-app1,     app,  ota_1,     0x1D0000, 0x1C0000,
+app1,     app,  ota_1,     0x190000, 0x180000,
-spiffs,   data, spiffs,    0x390000, 0x60000,
+spiffs,   data, spiffs,    0x310000, 0xE0000,

platformio.ini

@@ -9,7 +9,7 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [common]
-version = "1.2.87"
+version = "1.2.101"
 
 [env:esp32dev]
 platform = espressif32
@@ -20,7 +20,10 @@ monitor_speed = 115200
 lib_deps =
     tzapu/WiFiManager @ ^2.0.17
     https://github.com/me-no-dev/ESPAsyncWebServer.git#master
-    me-no-dev/AsyncTCP @ ^1.1.1
+    #me-no-dev/AsyncTCP @ ^1.1.1
+    https://github.com/esphome/AsyncTCP.git
+    #mathieucarbou/ESPAsyncWebServer @ ^3.6.0
+    #esp32async/AsyncTCP @ ^3.3.5
     bogde/HX711 @ ^0.7.5
     adafruit/Adafruit SSD1306 @ ^2.5.13
     adafruit/Adafruit GFX Library @ ^1.11.11
@@ -43,41 +46,30 @@ build_flags =
     -fdata-sections
     -DNDEBUG
     -mtext-section-literals
-    '-D VERSION="${common.version}"'
+    -DVERSION=\"${common.version}\"
     -DASYNCWEBSERVER_REGEX
-    -DCORE_DEBUG_LEVEL=1
+    -DCORE_DEBUG_LEVEL=3
     -DCONFIG_ARDUHAL_LOG_COLORS=1
     -DOTA_DEBUG=1
-    -DARDUINO_RUNNING_CORE=1
-    -DARDUINO_EVENT_RUNNING_CORE=1
     -DCONFIG_OPTIMIZATION_LEVEL_DEBUG=1
     -DCONFIG_ESP32_PANIC_PRINT_REBOOT
-    -DCONFIG_ARDUINO_OTA_READSIZE=1024
-    -DCONFIG_ASYNC_TCP_RUNNING_CORE=1
-    -DCONFIG_ASYNC_TCP_USE_WDT=0
-    -DCONFIG_LWIP_TCP_MSS=1460
-    -DOTA_PARTITION_SUBTYPE=0x10
-    -DPARTITION_TABLE_OFFSET=0x8000
-    -DPARTITION_TABLE_SIZE=0x1000
-    -DCONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE=1
-    -DCONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP=1
-    -DCONFIG_BOOTLOADER_SKIP_VALIDATE_ON_POWER_ON=1
-    -DCONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0x1000
-    -DCONFIG_PARTITION_TABLE_OFFSET=0x8000
-    -DCONFIG_PARTITION_TABLE_MD5=y
     -DBOOT_APP_PARTITION_OTA_0=1
+    -DCONFIG_LOG_DEFAULT_LEVEL=3
+    -DCONFIG_LWIP_TCP_MSL=60000
+    -DCONFIG_LWIP_TCP_WND_DEFAULT=8192
+    -DCONFIG_LWIP_TCP_SND_BUF_DEFAULT=4096
+    -DCONFIG_LWIP_TCP_RCV_BUF_DEFAULT=4096
+    -DCONFIG_LWIP_MAX_ACTIVE_TCP=16
     
 extra_scripts = 
     scripts/extra_script.py
-    pre:scripts/pre_build.py     ; wird zuerst ausgeführt
+    ${env:buildfs.extra_scripts}
-    pre:scripts/pre_spiffs.py    ; wird als zweites ausgeführt
-    pre:scripts/combine_html.py  ; wird als drittes ausgeführt
-    scripts/gzip_files.py
 
-; Remove or comment out the targets line
+[env:buildfs]
-;targets = buildfs, build
+extra_scripts =
+    pre:scripts/combine_html.py  ; Combine header with HTML files
+    scripts/gzip_files.py       ; Compress files for SPIFFS
 
-; Add a custom target to build both
 [platformio]
 default_envs = esp32dev
 

scripts/pre_spiffs.py

@@ -1,5 +1,23 @@
 Import("env")
 
+board_config = env.BoardConfig()
+
+# Calculate SPIFFS size based on partition table
+SPIFFS_START = 0x310000  # From partitions.csv
+SPIFFS_SIZE = 0xE0000   # From partitions.csv
+SPIFFS_PAGE = 256
+SPIFFS_BLOCK = 4096
+
+env.Replace(
+    MKSPIFFSTOOL="mkspiffs",
+    SPIFFSBLOCKSZ=SPIFFS_BLOCK,
+    SPIFFSBLOCKSIZE=SPIFFS_BLOCK,
+    SPIFFSSTART=SPIFFS_START,
+    SPIFFSEND=SPIFFS_START + SPIFFS_SIZE,
+    SPIFFSPAGESZ=SPIFFS_PAGE,
+    SPIFFSSIZE=SPIFFS_SIZE
+)
+
 # Wiederverwendung der replace_version Funktion
 exec(open("./scripts/pre_build.py").read())
 

src/api.cpp

@@ -60,10 +60,10 @@ JsonDocument fetchSpoolsForWebsite() {
             JsonArray filteredSpools = filteredDoc.to<JsonArray>();
 
             for (JsonObject spool : spools) {
-                JsonObject filteredSpool = filteredSpools.createNestedObject();
+                JsonObject filteredSpool = filteredSpools.add<JsonObject>();
                 filteredSpool["extra"]["nfc_id"] = spool["extra"]["nfc_id"];
 
-                JsonObject filament = filteredSpool.createNestedObject("filament");
+                JsonObject filament = filteredSpool["filament"].to<JsonObject>();
                 filament["sm_id"] = spool["id"];
                 filament["id"] = spool["filament"]["id"];
                 filament["name"] = spool["filament"]["name"];
@@ -73,7 +73,7 @@ JsonDocument fetchSpoolsForWebsite() {
                 filament["price_meter"] = spool["filament"]["extra"]["price_meter"];
                 filament["price_gramm"] = spool["filament"]["extra"]["price_gramm"];
 
-                JsonObject vendor = filament.createNestedObject("vendor");
+                JsonObject vendor = filament["vendor"].to<JsonObject>();
                 vendor["id"] = spool["filament"]["vendor"]["id"];
                 vendor["name"] = spool["filament"]["vendor"]["name"];
             }
@@ -110,13 +110,13 @@ JsonDocument fetchAllSpoolsInfo() {
             JsonArray filteredSpools = filteredDoc.to<JsonArray>();
 
             for (JsonObject spool : spools) {
-                JsonObject filteredSpool = filteredSpools.createNestedObject();
+                JsonObject filteredSpool = filteredSpools.add<JsonObject>();
                 filteredSpool["price"] = spool["price"];
                 filteredSpool["remaining_weight"] = spool["remaining_weight"];
                 filteredSpool["used_weight"] = spool["used_weight"];
                 filteredSpool["extra"]["nfc_id"] = spool["extra"]["nfc_id"];
 
-                JsonObject filament = filteredSpool.createNestedObject("filament");
+                JsonObject filament = filteredSpool["filament"].to<JsonObject>();
                 filament["id"] = spool["filament"]["id"];
                 filament["name"] = spool["filament"]["name"];
                 filament["material"] = spool["filament"]["material"];
@@ -125,11 +125,11 @@ JsonDocument fetchAllSpoolsInfo() {
                 filament["spool_weight"] = spool["filament"]["spool_weight"];
                 filament["color_hex"] = spool["filament"]["color_hex"];
 
-                JsonObject vendor = filament.createNestedObject("vendor");
+                JsonObject vendor = filament["vendor"].to<JsonObject>();
                 vendor["id"] = spool["filament"]["vendor"]["id"];
                 vendor["name"] = spool["filament"]["vendor"]["name"];
 
-                JsonObject extra = filament.createNestedObject("extra");
+                JsonObject extra = filament["extra"].to<JsonObject>();
                 extra["nozzle_temperature"] = spool["filament"]["extra"]["nozzle_temperature"];
                 extra["price_gramm"] = spool["filament"]["extra"]["price_gramm"];
                 extra["price_meter"] = spool["filament"]["extra"]["price_meter"];
@@ -186,7 +186,7 @@ bool updateSpoolTagId(String uidString, const char* payload) {
     }
     
     // Überprüfe, ob die erforderlichen Felder vorhanden sind
-    if (!doc.containsKey("sm_id") || doc["sm_id"] == "") {
+    if (!doc["sm_id"].is<String>() || doc["sm_id"].as<String>() == "") {
         Serial.println("Keine Spoolman-ID gefunden.");
         return false;
     }
@@ -368,7 +368,7 @@ bool checkSpoolmanExtraFields() {
                 for (uint8_t s = 0; s < extraLength; s++) {
                     bool found = false;
                     for (JsonObject field : doc.as<JsonArray>()) {
-                        if (field.containsKey("key") && field["key"] == extraFields[s]) {
+                        if (field["key"].is<String>() && field["key"] == extraFields[s]) {
                             Serial.println("Feld gefunden: " + extraFields[s]);
                             found = true;
                             break;
@@ -430,7 +430,7 @@ bool checkSpoolmanInstance(const String& url) {
             String payload = http.getString();
             JsonDocument doc;
             DeserializationError error = deserializeJson(doc, payload);
-            if (!error && doc.containsKey("status")) {
+            if (!error && doc["status"].is<String>()) {
                 const char* status = doc["status"];
                 http.end();
 
@@ -469,7 +469,7 @@ bool saveSpoolmanUrl(const String& url) {
 
 String loadSpoolmanUrl() {
     JsonDocument doc;
-    if (loadJsonValue("/spoolman_url.json", doc) && doc.containsKey("url")) {
+    if (loadJsonValue("/spoolman_url.json", doc) && doc["url"].is<String>()) {
         return doc["url"].as<String>();
     }
     Serial.println("Keine gültige Spoolman-URL gefunden.");

src/bambu.cpp

@@ -58,7 +58,7 @@ bool saveBambuCredentials(const String& ip, const String& serialnr, const String
 
 bool loadBambuCredentials() {
     JsonDocument doc;
-    if (loadJsonValue("/bambu_credentials.json", doc) && doc.containsKey("bambu_ip")) {
+    if (loadJsonValue("/bambu_credentials.json", doc) && doc["bambu_ip"].is<String>()) {
         // Temporäre Strings für die Werte
         String ip = doc["bambu_ip"].as<String>();
         String code = doc["bambu_accesscode"].as<String>();
@@ -270,9 +270,9 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
     }
 
     // Prüfen, ob "print->upgrade_state" und "print.ams.ams" existieren
-    if (doc["print"].containsKey("upgrade_state")) {
+    if (doc["print"]["upgrade_state"].is<String>()) {
         // Prüfen ob AMS-Daten vorhanden sind
-        if (!doc["print"].containsKey("ams") || !doc["print"]["ams"].containsKey("ams")) {
+        if (!doc["print"]["ams"].is<String>() || !doc["print"]["ams"]["ams"].is<String>()) {
             return;
         }
 
@@ -315,7 +315,7 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
         }
 
         // Prüfe die externe Spule
-        if (!hasChanges && doc["print"].containsKey("vt_tray")) {
+        if (!hasChanges && doc["print"]["vt_tray"].is<String>()) {
             JsonObject vtTray = doc["print"]["vt_tray"];
             bool foundExternal = false;
             
@@ -363,7 +363,7 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
         ams_count = amsArray.size();
 
         // Wenn externe Spule vorhanden, füge sie hinzu
-        if (doc["print"].containsKey("vt_tray")) {
+        if (doc["print"]["vt_tray"].is<String>()) {
             JsonObject vtTray = doc["print"]["vt_tray"];
             int extIdx = ams_count;  // Index für externe Spule
             ams_data[extIdx].ams_id = 255;  // Spezielle ID für externe Spule
@@ -387,14 +387,14 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
         JsonArray wsArray = wsDoc.to<JsonArray>();
 
         for (int i = 0; i < ams_count; i++) {
-            JsonObject amsObj = wsArray.createNestedObject();
+            JsonObject amsObj = wsArray.add<JsonObject>();
             amsObj["ams_id"] = ams_data[i].ams_id;
 
-            JsonArray trays = amsObj.createNestedArray("tray");
+            JsonArray trays = amsObj["tray"].to<JsonArray>();
             int maxTrays = (ams_data[i].ams_id == 255) ? 1 : 4;
             
             for (int j = 0; j < maxTrays; j++) {
-                JsonObject trayObj = trays.createNestedObject();
+                JsonObject trayObj = trays.add<JsonObject>();
                 trayObj["id"] = ams_data[i].trays[j].id;
                 trayObj["tray_info_idx"] = ams_data[i].trays[j].tray_info_idx;
                 trayObj["tray_type"] = ams_data[i].trays[j].tray_type;
@@ -427,14 +427,14 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
                 JsonArray wsArray = wsDoc.to<JsonArray>();
 
                 for (int j = 0; j < ams_count; j++) {
-                    JsonObject amsObj = wsArray.createNestedObject();
+                    JsonObject amsObj = wsArray.add<JsonObject>();
                     amsObj["ams_id"] = ams_data[j].ams_id;
 
-                    JsonArray trays = amsObj.createNestedArray("tray");
+                    JsonArray trays = amsObj["tray"].to<JsonArray>();
                     int maxTrays = (ams_data[j].ams_id == 255) ? 1 : 4;
                     
                     for (int k = 0; k < maxTrays; k++) {
-                        JsonObject trayObj = trays.createNestedObject();
+                        JsonObject trayObj = trays.add<JsonObject>();
                         trayObj["id"] = ams_data[j].trays[k].id;
                         trayObj["tray_info_idx"] = ams_data[j].trays[k].tray_info_idx;
                         trayObj["tray_type"] = ams_data[j].trays[k].tray_type;

src/commonFS.cpp

@@ -1,4 +1,5 @@
 #include "commonFS.h"
+#include <SPIFFS.h>
 
 bool saveJsonValue(const char* filename, const JsonDocument& doc) {
     File file = SPIFFS.open(filename, "w");
@@ -35,23 +36,12 @@ bool loadJsonValue(const char* filename, JsonDocument& doc) {
     return true;
 }
 
-bool initializeSPIFFS() {
+void initializeSPIFFS() {
-    // Erster Versuch
+    if (!SPIFFS.begin(true, "/spiffs", 10, "spiffs")) {
-    if (SPIFFS.begin(true)) {
+        Serial.println("SPIFFS Mount Failed");
-        Serial.println("SPIFFS mounted successfully.");
+        return;
-        return true;
     }
-    
+    Serial.printf("SPIFFS Total: %u bytes\n", SPIFFS.totalBytes());
-    // Formatierung versuchen
+    Serial.printf("SPIFFS Used: %u bytes\n", SPIFFS.usedBytes());
-    Serial.println("Failed to mount SPIFFS. Formatting...");
+    Serial.printf("SPIFFS Free: %u bytes\n", SPIFFS.totalBytes() - SPIFFS.usedBytes());
-    SPIFFS.format();
-    
-    // Zweiter Versuch nach Formatierung
-    if (SPIFFS.begin(true)) {
-        Serial.println("SPIFFS formatted and mounted successfully.");
-        return true;
-    }
-    
-    Serial.println("SPIFFS initialization failed completely.");
-    return false;
 }

src/commonFS.h

@@ -7,6 +7,6 @@
 
 bool saveJsonValue(const char* filename, const JsonDocument& doc);
 bool loadJsonValue(const char* filename, JsonDocument& doc);
-bool initializeSPIFFS();
+void initializeSPIFFS();
 
 #endif

src/main.cpp

@@ -78,6 +78,8 @@ uint8_t wifiErrorCounter = 0;
 
 // ##### PROGRAM START #####
 void loop() {
+
+  /*
   // Überprüfe den WLAN-Status
   if (WiFi.status() != WL_CONNECTED) {
     wifiErrorCounter++;
@@ -87,6 +89,7 @@ void loop() {
     wifiOn = true;
   }
   if (wifiErrorCounter > 20) ESP.restart();
+  */
  
   unsigned long currentMillis = millis();
 

src/ota.cpp

@@ -1,77 +0,0 @@
-#include <Arduino.h>
-#include "ota.h"
-#include <Update.h>
-#include <SPIFFS.h>
-#include "commonFS.h"
-#include "bambu.h"
-#include "scale.h"
-#include "nfc.h"
-
-static bool tasksAreStopped = false;
-
-void stopAllTasks() {
-    Serial.println("Stopping RFID Reader");
-    if (RfidReaderTask) vTaskSuspend(RfidReaderTask);
-    Serial.println("Stopping Bambu");
-    if (BambuMqttTask) vTaskSuspend(BambuMqttTask);
-    Serial.println("Stopping Scale");
-    if (ScaleTask) vTaskSuspend(ScaleTask);
-    vTaskDelay(100 / portTICK_PERIOD_MS);
-    Serial.println("All tasks stopped");
-}
-
-void handleOTAUpload(AsyncWebServerRequest *request, String filename, size_t index, uint8_t *data, size_t len, bool final) {
-    if (!index) {
-        bool isFullImage = true;
-        Serial.printf("Update Start: %s (type: %s)\n", filename.c_str(), isFullImage ? "full" : "OTA");
-        
-        if (request->contentLength() == 0) {
-            request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Invalid file size\"}");
-            return;
-        }
-
-        if (!tasksAreStopped && (RfidReaderTask || BambuMqttTask || ScaleTask)) {
-            stopAllTasks();
-            tasksAreStopped = true;
-        }
-
-        bool success;
-        if (isFullImage) {
-            // Full image update ohne Magic Byte Check, aber mit U_FLASH
-            success = Update.begin(UPDATE_SIZE_UNKNOWN, U_FLASH);
-        } else {
-            // Normales OTA update mit Magic Byte Check
-            if (data[0] != 0xE9) {
-                Serial.printf("Wrong magic byte: 0x%02X (expected 0xE9)\n", data[0]);
-                request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Invalid firmware format\"}");
-                return;
-            }
-            success = Update.begin(request->contentLength());
-        }
-
-        if (!success) {
-            Update.printError(Serial);
-            request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Update start failed\"}");
-            return;
-        }
-    }
-
-    if (Update.write(data, len) != len) {
-        Update.printError(Serial);
-        request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Write failed\"}");
-        return;
-    }
-
-    if (final) {
-        if (!Update.end(true)) {
-            Update.printError(Serial);
-            request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Update failed\"}");
-            return;
-        }
-        Serial.println("Update successful, restarting...");
-        request->send(200, "application/json", "{\"status\":\"success\",\"message\":\"Update successful! Device will restart...\",\"restart\":true}");
-        delay(500);
-        ESP.restart();
-    }
-}
-

src/ota.h

@@ -1,14 +0,0 @@
-#ifndef OTA_H
-#define OTA_H
-
-#include <ESPAsyncWebServer.h>
-
-// Update size unknown constant, falls nicht bereits definiert
-#ifndef UPDATE_SIZE_UNKNOWN
-#define UPDATE_SIZE_UNKNOWN 0xFFFFFFFF
-#endif
-
-void stopAllTasks();
-void handleOTAUpload(AsyncWebServerRequest *request, String filename, size_t index, uint8_t *data, size_t len, bool final);
-
-#endif

src/scale.cpp

@@ -3,9 +3,9 @@
 #include <ArduinoJson.h>
 #include "config.h"
 #include "HX711.h"
-#include <EEPROM.h>
 #include "display.h"
 #include "esp_task_wdt.h"
+#include <Preferences.h>
 
 HX711 scale;
 
@@ -17,6 +17,10 @@ uint8_t weigthCouterToApi = 0;
 uint8_t scale_tare_counter = 0;
 uint8_t pauseMainTask = 0;
 
+Preferences preferences;
+const char* NVS_NAMESPACE = "scale";
+const char* NVS_KEY_CALIBRATION = "cal_value";
+
 // ##### Funktionen für Waage #####
 uint8_t tareScale() {
   Serial.println("Tare scale");
@@ -48,13 +52,12 @@ void scale_loop(void * parameter) {
 
 void start_scale() {
   Serial.println("Prüfe Calibration Value");
-  long calibrationValue; // calibration value (see example file "Calibration.ino")
+  long calibrationValue;
-  //calibrationValue = 696.0; // uncomment this if you want to set the calibration value in the sketch
 
-  EEPROM.begin(512);
+  // NVS
-  EEPROM.get(calVal_eepromAdress, calibrationValue); // uncomment this if you want to fetch the calibration value from eeprom
+  preferences.begin(NVS_NAMESPACE, true); // true = readonly
-
+  calibrationValue = preferences.getLong(NVS_KEY_CALIBRATION, defaultScaleCalibrationValue);
-  //calibrationValue = EEPROM.read(calVal_eepromAdress);
+  preferences.end();
 
   Serial.print("Read Scale Calibration Value ");
   Serial.println(calibrationValue);
@@ -137,18 +140,19 @@ uint8_t calibrate_scale() {
     {
       Serial.print("New calibration value has been set to: ");
       Serial.println(newCalibrationValue);
-      Serial.print("Save this value to EEPROM adress ");
-      Serial.println(calVal_eepromAdress);
 
-      //EEPROM.put(calVal_eepromAdress, newCalibrationValue);
+      // Speichern mit NVS
-      EEPROM.put(calVal_eepromAdress, newCalibrationValue);
+      preferences.begin(NVS_NAMESPACE, false); // false = readwrite
-      EEPROM.commit();
+      preferences.putLong(NVS_KEY_CALIBRATION, newCalibrationValue);
+      preferences.end();
 
-      EEPROM.get(calVal_eepromAdress, newCalibrationValue);
+      // Verifizieren
-      //newCalibrationValue = EEPROM.read(calVal_eepromAdress);
+      preferences.begin(NVS_NAMESPACE, true);
+      long verifyValue = preferences.getLong(NVS_KEY_CALIBRATION, 0);
+      preferences.end();
 
-      Serial.print("Read Value ");
+      Serial.print("Verified stored value: ");
-      Serial.println(newCalibrationValue);
+      Serial.println(verifyValue);
 
       Serial.println("End calibration, revome weight");
 

src/website.cpp

@@ -7,10 +7,14 @@
 #include "nfc.h"
 #include "scale.h"
 #include "esp_task_wdt.h"
-#include "ota.h"
+#include <Update.h>
+
+#ifndef VERSION
+  #define VERSION "1.1.0"
+#endif
 
 // Cache-Control Header definieren
-#define CACHE_CONTROL "max-age=31536000" // Cache für 1 Jahr
+#define CACHE_CONTROL "max-age=604800" // Cache für 1 Woche
 
 AsyncWebServer server(webserverPort);
 AsyncWebSocket ws("/ws");
@@ -44,7 +48,7 @@ void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventTyp
         }
 
         else if (doc["type"] == "writeNfcTag") {
-            if (doc.containsKey("payload")) {
+            if (doc["payload"].is<String>()) {
                 // Versuche NFC-Daten zu schreiben
                 String payloadString;
                 serializeJson(doc["payload"], payloadString);
@@ -156,6 +160,14 @@ void sendAmsData(AsyncWebSocketClient *client) {
 }
 
 void setupWebserver(AsyncWebServer &server) {
+    // WebSocket-Optimierungen
+    ws.onEvent(onWsEvent);
+    ws.enable(true);
+
+    // Konfiguriere Server für große Uploads
+    server.onRequestBody([](AsyncWebServerRequest *request, uint8_t *data, size_t len, size_t index, size_t total){});
+    server.onFileUpload([](AsyncWebServerRequest *request, const String& filename, size_t index, uint8_t *data, size_t len, bool final){});
+
     // Lade die Spoolman-URL beim Booten
     spoolmanUrl = loadSpoolmanUrl();
     Serial.print("Geladene Spoolman-URL: ");
@@ -222,7 +234,7 @@ void setupWebserver(AsyncWebServer &server) {
         html.replace("{{spoolmanUrl}}", spoolmanUrl);
 
         JsonDocument doc;
-        if (loadJsonValue("/bambu_credentials.json", doc) && doc.containsKey("bambu_ip")) {
+        if (loadJsonValue("/bambu_credentials.json", doc) && doc["bambu_ip"].is<String>()) {
             String bambuIp = doc["bambu_ip"].as<String>();
             String bambuSerial = doc["bambu_serialnr"].as<String>();
             String bambuCode = doc["bambu_accesscode"].as<String>();
@@ -338,31 +350,81 @@ void setupWebserver(AsyncWebServer &server) {
         Serial.println("RFID.js gesendet");
     });
 
-    // Route for Firmware Update
+    // Vereinfachter Update-Handler
     server.on("/upgrade", HTTP_GET, [](AsyncWebServerRequest *request) {
-        // During OTA, reduce memory usage
-        ws.enable(false);  // Temporarily disable WebSocket
-        ws.cleanupClients();
-        
-        Serial.println("Request for /upgrade received");
         AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/upgrade.html.gz", "text/html");
         response->addHeader("Content-Encoding", "gzip");
-        response->addHeader("Cache-Control", CACHE_CONTROL);
+        response->addHeader("Cache-Control", "no-store");
         request->send(response);
     });
 
+    // Update-Handler mit verbesserter Fehlerbehandlung
     server.on("/update", HTTP_POST, 
         [](AsyncWebServerRequest *request) {
-            // The response will be sent from handleOTAUpload when the upload is complete
+            // Nach Update-Abschluss
+            bool success = !Update.hasError();
+            AsyncWebServerResponse *response = request->beginResponse(
+                success ? 200 : 400,
+                "application/json",
+                success ? "{\"success\":true,\"message\":\"Update successful\"}" 
+                       : "{\"success\":false,\"message\":\"Update failed\"}"
+            );
+            response->addHeader("Connection", "close");
+            request->send(response);
+            
+            if (success) {
+                delay(500);
+                ESP.restart();
+            }
         },
         [](AsyncWebServerRequest *request, const String& filename, size_t index, uint8_t *data, size_t len, bool final) {
-            // Free memory before handling update
+            static size_t updateSize = 0;
-            ws.enable(false);
+            static int command = 0;
-            ws.cleanupClients();
+
-            handleOTAUpload(request, filename, index, data, len, final);
+            if (!index) {
+                updateSize = request->contentLength();
+                command = (filename.indexOf("spiffs") > -1) ? U_SPIFFS : U_FLASH;
+                Serial.printf("Update Start: %s\nSize: %u\nCommand: %d\n", filename.c_str(), updateSize, command);
+
+                if (!Update.begin(updateSize, command)) {
+                    Serial.printf("Update Begin Error: ");
+                    Update.printError(Serial);
+                    String errorMsg = String("Update begin failed: ") + Update.errorString();
+                    request->send(400, "application/json", "{\"success\":false,\"message\":\"" + errorMsg + "\"}");
+                    return;
+                }
+            }
+
+            if (len) {
+                if (Update.write(data, len) != len) {
+                    Serial.printf("Update Write Error: ");
+                    Update.printError(Serial);
+                    String errorMsg = String("Write failed: ") + Update.errorString();
+                    request->send(400, "application/json", "{\"success\":false,\"message\":\"" + errorMsg + "\"}");
+                    return;
+                }
+                Serial.printf("Progress: %u/%u\r", index + len, updateSize);
+            }
+
+            if (final) {
+                if (!Update.end(true)) {
+                    Serial.printf("Update End Error: ");
+                    Update.printError(Serial);
+                    String errorMsg = String("Update end failed: ") + Update.errorString();
+                    request->send(400, "application/json", "{\"success\":false,\"message\":\"" + errorMsg + "\"}");
+                    return;
+                }
+                Serial.printf("\nUpdate Success: %uB\n", index+len);
+            }
         }
     );
 
+    server.on("/api/version", HTTP_GET, [](AsyncWebServerRequest *request){
+        String fm_version = VERSION;
+        String jsonResponse = "{\"version\": \""+ fm_version +"\"}";
+        request->send(200, "application/json", jsonResponse);
+    });
+
     // Fehlerbehandlung für nicht gefundene Seiten
     server.onNotFound([](AsyncWebServerRequest *request){
         Serial.print("404 - Nicht gefunden: ");
@@ -379,3 +441,80 @@ void setupWebserver(AsyncWebServer &server) {
     server.begin();
     Serial.println("Webserver gestartet");
 }
+
+void handleOTAUpload(AsyncWebServerRequest *request, const String& filename, size_t index, uint8_t *data, size_t len, bool final) {
+    static bool isSpiffsUpdate = false;
+    if (!index) {
+        // Start eines neuen Uploads
+        Serial.println("Update Start: " + filename);
+        
+        // Überprüfe den Dateityp basierend auf dem Dateinamen
+        bool isFirmware = filename.startsWith("filaman_");
+        isSpiffsUpdate = filename.startsWith("webpage_");
+        
+        if (!isFirmware && !isSpiffsUpdate) {
+            request->send(400, "application/json", "{\"message\":\"Invalid file type. File must start with 'filaman_' or 'webpage_'\"}");
+            return;
+        }
+
+        // Wähle den Update-Typ basierend auf dem Dateinamen
+        if (isSpiffsUpdate) {
+            if (!Update.begin(SPIFFS.totalBytes(), U_SPIFFS)) {
+                Update.printError(Serial);
+                request->send(400, "application/json", "{\"message\":\"SPIFFS Update failed: " + String(Update.errorString()) + "\"}");
+                return;
+            }
+            // Backup JSON configs before SPIFFS update
+            backupJsonConfigs();
+        } else {
+            if (!Update.begin(UPDATE_SIZE_UNKNOWN, U_FLASH)) {
+                Update.printError(Serial);
+                request->send(400, "application/json", "{\"message\":\"Firmware Update failed: " + String(Update.errorString()) + "\"}");
+                return;
+            }
+        }
+    }
+
+    if (Update.write(data, len) != len) {
+        Update.printError(Serial);
+        request->send(400, "application/json", "{\"message\":\"Write failed: " + String(Update.errorString()) + "\"}");
+        return;
+    }
+
+    if (final) {
+        if (!Update.end(true)) {
+            Update.printError(Serial);
+            request->send(400, "application/json", "{\"message\":\"Update failed: " + String(Update.errorString()) + "\"}");
+            return;
+        }
+        if (isSpiffsUpdate) {
+            // Restore JSON configs after SPIFFS update
+            restoreJsonConfigs();
+        }
+        request->send(200, "application/json", "{\"message\":\"Update successful!\", \"restart\": true}");
+        delay(500);
+        ESP.restart();
+    }
+}
+
+void backupJsonConfigs() {
+    const char* configs[] = {"/bambu_credentials.json", "/spoolman_url.json"};
+    for (const char* config : configs) {
+        if (SPIFFS.exists(config)) {
+            String backupPath = String(config) + ".bak";
+            SPIFFS.remove(backupPath);
+            SPIFFS.rename(config, backupPath);
+        }
+    }
+}
+
+void restoreJsonConfigs() {
+    const char* configs[] = {"/bambu_credentials.json", "/spoolman_url.json"};
+    for (const char* config : configs) {
+        String backupPath = String(config) + ".bak";
+        if (SPIFFS.exists(backupPath)) {
+            SPIFFS.remove(config);
+            SPIFFS.rename(backupPath, config);
+        }
+    }
+}

src/website.h

@@ -6,8 +6,8 @@
 #include "commonFS.h"
 #include "api.h"
 #include <ArduinoJson.h>
-#include <ESPAsyncWebServer.h>
+#include <Update.h>
-#include <AsyncWebSocket.h>
+#include <AsyncTCP.h>
 #include "bambu.h"
 #include "nfc.h"
 #include "scale.h"
@@ -17,10 +17,20 @@ extern String spoolmanUrl;
 extern AsyncWebServer server;
 extern AsyncWebSocket ws;
 
+// Server-Initialisierung und Handler
+void initWebServer();
+void handleUpload(AsyncWebServerRequest *request, String filename, size_t index, uint8_t *data, size_t len, bool final);
+void handleBody(AsyncWebServerRequest *request, uint8_t *data, size_t len, size_t index, size_t total);
 void setupWebserver(AsyncWebServer &server);
+
+// WebSocket-Funktionen
 void sendAmsData(AsyncWebSocketClient *client);
 void sendNfcData(AsyncWebSocketClient *client);
 void foundNfcTag(AsyncWebSocketClient *client, uint8_t success);
 void sendWriteResult(AsyncWebSocketClient *client, uint8_t success);
 
+// Upgrade-Funktionen
+void backupJsonConfigs();
+void restoreJsonConfigs();
+
 #endif

src/wlan.cpp

@@ -10,9 +10,19 @@ WiFiManager wm;
 bool wm_nonblocking = false;
 
 void initWiFi() {
+    // Optimierte WiFi-Einstellungen
     WiFi.mode(WIFI_STA); // explicitly set mode, esp defaults to STA+AP
+    WiFi.setSleep(false); // disable sleep mode
+    esp_wifi_set_ps(WIFI_PS_NONE);
     
-    //esp_wifi_set_max_tx_power(72); // Setze maximale Sendeleistung auf 20dBm
+    // Maximale Sendeleistung
+    WiFi.setTxPower(WIFI_POWER_19_5dBm); // Set maximum transmit power
+  
+    // Optimiere TCP/IP Stack
+    esp_wifi_set_protocol(WIFI_IF_STA, WIFI_PROTOCOL_11B | WIFI_PROTOCOL_11G | WIFI_PROTOCOL_11N);
+    
+    // Aktiviere WiFi-Roaming für bessere Stabilität
+    esp_wifi_set_rssi_threshold(-80);
   
     if(wm_nonblocking) wm.setConfigPortalBlocking(false);
     wm.setConfigPortalTimeout(320); // Portal nach 5min schließen