docs: update changelog for version 1.2.81

fix: correct version number in HTML files and platformio.ini to v1.2.76
enhance: streamline OTA update handling by removing unnecessary magic byte checks

.github/workflows/providers/gitea-release.yml

@@ -1,18 +1,24 @@
 name: Gitea Release
 
 on:
-  workflow_call:  # This workflow will only be triggered when called by another workflow
+  workflow_call:
-
+    inputs:
-permissions:
+      gitea_ref_name:
-  contents: write      # Required for creating releases
+        required: true
-  issues: read        # Required for reading changelog
+        type: string
-  pull-requests: read # Required for reading changelog
+      gitea_server_url:
+        required: true
+        type: string
+      gitea_repository:
+        required: true
+        type: string
+    secrets:
+      GITEA_TOKEN:
+        required: true
 
 jobs:
-  build:
+  create-release:
     runs-on: ubuntu-latest
-    permissions:
-      contents: write
     steps:
     - uses: actions/checkout@v4
     
@@ -24,78 +30,82 @@ jobs:
     - name: Install PlatformIO
       run: |
         python -m pip install --upgrade pip
-        pip install --upgrade platformio
+        pip install --upgrade platformio esptool
     
     - name: Build Firmware
       run: |
-        pio run -t buildfs  # Build SPIFFS
+        pio run -e esp32dev_ota -t buildfs  # Build SPIFFS
-        pio run            # Build firmware
+        pio run -e esp32dev_ota            # Build firmware
+        cp .pio/build/esp32dev_ota/firmware.bin .pio/build/esp32dev_ota/filaman.bin
+        cp .pio/build/esp32dev_ota/spiffs.bin .pio/build/esp32dev_ota/filaman_spiffs.bin
         
-    - name: Install esptool
+    - name: Prepare binaries
       run: |
-        pip install esptool
+        cd .pio/build/esp32dev_ota
         
-    - name: Merge firmware and SPIFFS
+        # Create OTA binary (firmware only)
-      run: |
+        cp firmware.bin filaman_ota.bin
+        
+        # Use esptool to create the full binary
         esptool.py --chip esp32 merge_bin \
           --flash_mode dio \
           --flash_freq 40m \
           --flash_size 4MB \
-          -o .pio/build/esp32dev/filaman_full.bin \
+          --target-offset 0x0 \
-          0x1000 .pio/build/esp32dev/bootloader.bin \
+          -o filaman_full.bin \
-          0x8000 .pio/build/esp32dev/partitions.bin \
+          0x1000 bootloader.bin \
-          0x10000 .pio/build/esp32dev/firmware.bin \
+          0x8000 partitions.bin \
-          0x290000 .pio/build/esp32dev/spiffs.bin
+          0x10000 firmware.bin \
+          0x3D0000 spiffs.bin
         
-    - name: Prepare OTA firmware
+        # Verify binaries
-      run: |
+        echo "File sizes:"
-        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_ota.bin
+        ls -lh *.bin
         
-    - name: Get version from tag
+        echo "Binary information:"
-      id: get_version
+        echo "OTA binary info:"
-      run: echo "VERSION=${GITHUB_REF#refs/tags/v}" >> $GITHUB_OUTPUT
+        esptool.py --chip esp32 image_info filaman_ota.bin || true
-      
+        echo "Full binary first 64 bytes:"
-    - name: Read CHANGELOG.md
+        od -A x -t x1z -N 64 filaman_full.bin
-      id: changelog
-      run: |
-        CHANGELOG=$(awk "/## \\[${{ steps.get_version.outputs.VERSION }}\\]/{p=1;print;next} /## \\[/{p=0} p" CHANGELOG.md)
-        echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
-        echo "$CHANGELOG" >> $GITHUB_OUTPUT
-        echo "EOF" >> $GITHUB_OUTPUT
 
     - name: Create Release
       env:
-        GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }}
+        TOKEN: ${{ secrets.GITEA_TOKEN }}
-        GITEA_API_URL: ${{ secrets.GITEA_API_URL }}
-        GITEA_REPOSITORY: ${{ secrets.GITEA_REPOSITORY }}
       run: |
-        # Create release using Gitea API
+        TAG="${{ inputs.gitea_ref_name }}"
-        RESPONSE=$(curl -X POST \
+        API_URL="${{ inputs.gitea_server_url }}/api/v1"
-        -H "Authorization: token ${GITEA_TOKEN}" \
+        REPO="${{ inputs.gitea_repository }}"
+        
+        # Create release
+        RESPONSE=$(curl -k -s \
+          -X POST \
+          -H "Authorization: token ${TOKEN}" \
           -H "Content-Type: application/json" \
-        -H "accept: application/json" \
+          -d "{
-        "${GITEA_API_URL}/repos/${GITEA_REPOSITORY}/releases" \
+            \"tag_name\":\"${TAG}\",
-        -d '{
+            \"name\":\"Release ${TAG}\",
-            "tag_name": "${{ github.ref_name }}",
+            \"body\":\"${{ steps.changelog.outputs.CHANGES }}\"
-            "name": "Release ${{ steps.get_version.outputs.VERSION }}",
+          }" \
-            "body": "${{ steps.changelog.outputs.CHANGES }}",
+          "${API_URL}/repos/${REPO}/releases")
-            "draft": false,
-            "prerelease": false
-        }')
         
-        # Extract release ID from response
+        RELEASE_ID=$(echo "$RESPONSE" | grep -o '"id":[0-9]*' | cut -d':' -f2 | head -n1)
-        RELEASE_ID=$(echo $RESPONSE | jq -r .id)
         
-        # Upload full firmware
+        if [ -n "$RELEASE_ID" ]; then
-        curl -X POST \
+          echo "Release created with ID: $RELEASE_ID"
-        -H "Authorization: token ${GITEA_TOKEN}" \
+          
+          # Upload binaries
+          cd .pio/build/esp32dev_ota
+          for file in filaman_full.bin filaman_ota.bin filaman.bin filaman_spiffs.bin; do
+            echo "Uploading $file..."
+            curl -k -s \
+              -X POST \
+              -H "Authorization: token ${TOKEN}" \
               -H "Content-Type: application/octet-stream" \
-        "${GITEA_API_URL}/repos/${GITEA_REPOSITORY}/releases/${RELEASE_ID}/assets?name=filaman_full.bin" \
+              --data-binary "@$file" \
-        --data-binary @.pio/build/esp32dev/filaman_full.bin
+              "${API_URL}/repos/${REPO}/releases/${RELEASE_ID}/assets?name=$file"
-        
+          done
-        # Upload OTA firmware
+        else
-        curl -X POST \
+          echo "Failed to create release. Response:"
-        -H "Authorization: token ${GITEA_TOKEN}" \
+          echo "$RESPONSE"
-        -H "Content-Type: application/octet-stream" \
+          exit 1
-        "${GITEA_API_URL}/repos/${GITEA_REPOSITORY}/releases/${RELEASE_ID}/assets?name=filaman_ota.bin" \
+        fi
-        --data-binary @.pio/build/esp32dev/filaman_ota.bin

.github/workflows/providers/github-release.yml

@@ -1,20 +1,13 @@
 name: GitHub Release
 
 on:
-  push:
+  workflow_call:
-    tags:
-      - 'v*'
-
-permissions:
-  contents: write      # Required for creating releases
-  issues: read        # Required for reading changelog
-  pull-requests: read # Required for reading changelog
 
 jobs:
-  build:
+  create-release:
     runs-on: ubuntu-latest
     permissions:
-      contents: write # Required for creating releases at job level
+      contents: write
     steps:
     - uses: actions/checkout@v4
     
@@ -26,60 +19,75 @@ jobs:
     - name: Install PlatformIO
       run: |
         python -m pip install --upgrade pip
-        pip install --upgrade platformio
+        pip install --upgrade platformio esptool
     
     - name: Build Firmware
       run: |
-        pio run -t buildfs  # Build SPIFFS
+        pio run -e esp32dev_ota -t buildfs  # Build SPIFFS
-        pio run            # Build firmware
+        pio run -e esp32dev_ota            # Build firmware
+        cp .pio/build/esp32dev_ota/firmware.bin .pio/build/esp32dev_ota/filaman.bin
+        cp .pio/build/esp32dev_ota/spiffs.bin .pio/build/esp32dev_ota/filaman_spiffs.bin
         
-    - name: Install esptool
+    - name: Prepare binaries
       run: |
-        pip install esptool
+        cd .pio/build/esp32dev_ota
         
-    - name: Merge firmware and SPIFFS
+        # Debug: Show all generated files
-      run: |
+        echo "Files in build directory:"
+        ls -la
+        
+        # Create OTA binary (already has correct magic byte)
+        cp firmware.bin filaman_ota.bin
+        
+        # Create a magic byte prepended binary for the bootloader
+        echo -ne '\xE9' > bootloader_with_magic.bin
+        cat bootloader.bin >> bootloader_with_magic.bin
+        
+        echo "Creating full binary with magic byte..."
         esptool.py --chip esp32 merge_bin \
+          --fill-flash-size 4MB \
           --flash_mode dio \
           --flash_freq 40m \
           --flash_size 4MB \
-          -o .pio/build/esp32dev/filaman_full.bin \
+          -o filaman_full.bin \
-          0x1000 .pio/build/esp32dev/bootloader.bin \
+          0x0000 bootloader_with_magic.bin \
-          0x8000 .pio/build/esp32dev/partitions.bin \
+          0x8000 partitions.bin \
-          0x10000 .pio/build/esp32dev/firmware.bin \
+          0x10000 firmware.bin \
-          0x290000 .pio/build/esp32dev/spiffs.bin
+          0x3D0000 spiffs.bin
         
-    - name: Prepare OTA firmware
+        # Verify magic bytes
-      run: |
+        echo "Checking magic bytes:"
-        # Use PlatformIO to create a proper OTA image
+        echo "OTA binary first bytes:"
-        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_ota.bin
+        hexdump -C -n 16 filaman_ota.bin
+        echo "Full binary first bytes:"
+        hexdump -C -n 16 filaman_full.bin
+        
+        # Verify file sizes
+        echo "File sizes:"
+        ls -lh *.bin
     
     - name: Get version from tag
       id: get_version
-      run: echo "VERSION=${GITHUB_REF#refs/tags/v}" >> $GITHUB_OUTPUT
+      run: |
+        echo "VERSION=${GITHUB_REF#refs/tags/v}" >> $GITHUB_OUTPUT
       
     - name: Read CHANGELOG.md
       id: changelog
       run: |
-        CHANGELOG=$(awk "/## \\[${{ steps.get_version.outputs.VERSION }}\\]/{p=1;print;next} /## \\[/{p=0} p" CHANGELOG.md)
+        VERSION=${{ steps.get_version.outputs.VERSION }}
+        CHANGELOG=$(awk "/## \\[$VERSION\\]/{p=1;print;next} /## \\[/{p=0} p" CHANGELOG.md)
         echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
         echo "$CHANGELOG" >> $GITHUB_OUTPUT
         echo "EOF" >> $GITHUB_OUTPUT
 
-    - name: Install and Configure GitHub CLI
+    - name: Create GitHub Release
-      run: |
-        curl -fsSL https://cli.github.com/packages/githubcli-archive-keyring.gpg | sudo dd of=/usr/share/keyrings/githubcli-archive-keyring.gpg \
-        && sudo chmod go+r /usr/share/keyrings/githubcli-archive-keyring.gpg \
-        && echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/githubcli-archive-keyring.gpg] https://cli.github.com/packages stable main" | sudo tee /etc/apt/sources.list.d/github-cli.list > /dev/null \
-        && sudo apt update \
-        && sudo apt install gh -y
-        
-    - name: Create Release with GitHub CLI
       env:
-        GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        GH_TOKEN: ${{ github.token }}
       run: |
         gh release create "${{ github.ref_name }}" \
           --title "Release ${{ steps.get_version.outputs.VERSION }}" \
           --notes "${{ steps.changelog.outputs.CHANGES }}" \
-          ".pio/build/esp32dev/filaman_full.bin#filaman_full.bin" \
+          .pio/build/esp32dev_ota/filaman_full.bin \
-          ".pio/build/esp32dev/filaman_ota.bin#filaman_ota.bin"
+          .pio/build/esp32dev_ota/filaman_ota.bin \
+          .pio/build/esp32dev_ota/filaman.bin \
+          .pio/build/esp32dev_ota/filaman_spiffs.bin

.github/workflows/release.yml

@@ -1,4 +1,4 @@
-name: Release
+name: Release Workflow
 
 on:
   push:
@@ -6,28 +6,65 @@ on:
       - 'v*'
 
 jobs:
-  detect:
+  route:
     runs-on: ubuntu-latest
     outputs:
-      platform: ${{ steps.platform.outputs.platform }}
+      provider: ${{ steps.provider.outputs.provider }}
+      gitea_ref_name: ${{ steps.provider.outputs.gitea_ref_name }}
+      gitea_server_url: ${{ steps.provider.outputs.gitea_server_url }}
+      gitea_repository: ${{ steps.provider.outputs.gitea_repository }}
     steps:
-      - uses: actions/checkout@v4
+      - name: Checkout Repository
+        uses: actions/checkout@v3
 
-      - name: Determine hosting platform
+      - name: Debug Environment
-        id: platform
         run: |
-          if [[ "$GITHUB_SERVER_URL" == "https://github.com" ]]; then
+          echo "CI Environment Details:"
-            echo "platform=github" >> $GITHUB_OUTPUT
+          echo "GITHUB_ACTIONS=${GITHUB_ACTIONS:-not set}"
+          echo "GITEA_ACTIONS=${GITEA_ACTIONS:-not set}"
+          echo "GITEA_REPOSITORY=${GITEA_REPOSITORY:-not set}"
+          echo "GITEA_SERVER_URL=${GITEA_SERVER_URL:-not set}"
+          echo "RUNNER_NAME=${RUNNER_NAME:-not set}"
+
+      - name: Determine CI Provider
+        id: provider
+        shell: bash
+        run: |
+          if [ -n "${GITEA_ACTIONS}" ] || [ -n "${GITEA_REPOSITORY}" ] || [[ "${RUNNER_NAME}" == *"gitea"* ]]; then
+            echo "provider=gitea" >> "$GITHUB_OUTPUT"
+            echo "gitea_ref_name=${GITHUB_REF_NAME}" >> "$GITHUB_OUTPUT"
+            echo "gitea_server_url=${GITHUB_SERVER_URL}" >> "$GITHUB_OUTPUT"
+            echo "gitea_repository=${GITHUB_REPOSITORY}" >> "$GITHUB_OUTPUT"
+          elif [ "${GITHUB_ACTIONS}" = "true" ]; then
+            echo "provider=github" >> "$GITHUB_OUTPUT"
           else
-            echo "platform=gitea" >> $GITHUB_OUTPUT
+            echo "provider=unknown" >> "$GITHUB_OUTPUT"
           fi
 
-  gitea-release:
+  verify-provider:
-    needs: detect
+    needs: route
-    if: needs.detect.outputs.platform == 'gitea'
+    runs-on: ubuntu-latest
-    uses: ./.github/workflows/providers/gitea-release.yml
+    steps:
+      - name: Echo detected provider
+        run: |
+          echo "Detected CI Provider: ${{ needs.route.outputs.provider }}"
+          if [ "${{ needs.route.outputs.provider }}" = "unknown" ]; then
+            echo "::error::Failed to detect CI provider!"
+            exit 1
+          fi
 
   github-release:
-    needs: detect
+    needs: [route, verify-provider]
-    if: needs.detect.outputs.platform == 'github'
+    if: needs.route.outputs.provider == 'github'
     uses: ./.github/workflows/providers/github-release.yml
+
+  gitea-release:
+    needs: [route, verify-provider]
+    if: needs.route.outputs.provider == 'gitea'
+    uses: ./.github/workflows/providers/gitea-release.yml
+    with:
+      gitea_ref_name: ${{ needs.route.outputs.gitea_ref_name }}
+      gitea_server_url: ${{ needs.route.outputs.gitea_server_url }}
+      gitea_repository: ${{ needs.route.outputs.gitea_repository }}
+    secrets:
+      GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }}

CHANGELOG.md

@@ -1,5 +1,435 @@
 # Changelog
 
+## [1.2.81] - 2025-02-20
+### Changed
+- update webpages for version v1.2.81
+- update Gitea and GitHub release workflows to use esp32dev_ota for building and uploading firmware and SPIFFS binaries
+
+
+## [1.2.80] - 2025-02-20
+### Added
+- update Gitea and GitHub release workflows to include new firmware and SPIFFS binaries; fix version display in HTML files to v1.2.78
+
+### Changed
+- update webpages for version v1.2.80
+- bump version to 1.2.79 in platformio.ini
+
+
+## [1.2.79] - 2025-02-20
+### Changed
+- update webpages for version v1.2.79
+- simplify Gitea release workflow by using esptool for binary creation
+
+
+## [1.2.78] - 2025-02-20
+### Changed
+- update webpages for version v1.2.78
+- streamline Gitea release workflow and update version to 1.2.77
+
+### Fixed
+- update Gitea and GitHub release workflows to improve binary preparation and verification fix: correct version number in HTML files and platformio.ini to v1.2.76 enhance: streamline OTA update handling by removing unnecessary magic byte checks
+
+
+## [1.2.77] - 2025-02-20
+### Changed
+- optimize Gitea release workflow by simplifying build steps and improving file handling
+- update webpages for version v1.2.77
+
+
+## [1.2.76] - 2025-02-20
+### Added
+- enhance OTA update process with improved file verification and new OTA data initialization
+
+### Changed
+- update webpages for version v1.2.76
+- streamline Gitea release workflow and remove obsolete OTA data initialization script
+
+
+## [1.2.75] - 2025-02-20
+### Changed
+- update webpages for version v1.2.75
+- simplify OTA update handling by removing unnecessary variables and improving error reporting
+
+
+## [1.2.74] - 2025-02-20
+### Changed
+- update webpages for version v1.2.74
+- enhance OTA update process with improved handling of full image updates and SPIFFS data
+
+
+## [1.2.73] - 2025-02-20
+### Changed
+- update webpages for version v1.2.73
+- improve OTA update process with enhanced size checks and progress logging
+
+### Fixed
+- enhance OTA update process with improved size checks and debugging output
+
+
+## [1.2.72] - 2025-02-20
+### Changed
+- update webpages for version v1.2.72
+- simplify OTA update process by removing unnecessary buffer and adjusting offsets
+
+
+## [1.2.71] - 2025-02-20
+### Added
+- update version number to v1.2.65 in HTML files and platformio.ini; add script to create full binary
+
+### Changed
+- update webpages for version v1.2.71
+
+
+## [1.2.70] - 2025-02-20
+### Added
+- add logging to stopAllTasks for better debugging
+
+### Changed
+- update webpages for version v1.2.70
+
+
+## [1.2.69] - 2025-02-20
+### Changed
+- update webpages for version v1.2.69
+
+
+## [1.2.68] - 2025-02-20
+### Added
+- add task handles for BambuMqttTask and ScaleTask; rename stopTasks to stopAllTasks
+
+### Changed
+- update webpages for version v1.2.68
+
+### Fixed
+- update stopAllTasks to suspend RfidReaderTask instead of NfcTask
+
+
+## [1.2.67] - 2025-02-20
+### Added
+- improve OTA upload handling and add SPIFFS update support
+
+### Changed
+- update webpages for version v1.2.67
+
+
+## [1.2.66] - 2025-02-20
+### Added
+- enhance OTA upload to support SPIFFS updates
+
+### Changed
+- update webpages for version v1.2.66
+
+
+## [1.2.65] - 2025-02-20
+### Changed
+- update webpages for version v1.2.65
+
+
+## [1.2.64] - 2025-02-20
+### Changed
+- update webpages for version v1.2.64
+
+### Fixed
+- improve error handling in OTA upload process
+
+
+## [1.2.63] - 2025-02-20
+### Added
+- update version to 1.2.63
+
+### Changed
+- update webpages for version v1.2.63
+
+
+## [1.2.62] - 2025-02-20
+### Added
+- update version to 1.2.62
+
+### Changed
+- update webpages for version 1.2.62
+
+
+## [1.2.61] - 2025-02-20
+### Added
+- update version to 1.2.61 and enhance OTA update error handling
+
+### Changed
+- update webpages for version 1.2.61
+
+
+## [1.2.60] - 2025-02-20
+### Added
+- update version to 1.2.60 in platformio configuration
+
+### Changed
+- update webpages for version 1.2.60
+
+
+## [1.2.59] - 2025-02-20
+### Added
+- update version to 1.2.59 and enhance OTA upload handling
+
+### Changed
+- update webpages for version 1.2.59
+
+
+## [1.2.58] - 2025-02-20
+### Added
+- update version to 1.2.58 in HTML files and platformio configuration
+
+
+## [1.2.57] - 2025-02-20
+### Added
+- update version to 1.2.57 in platformio configuration
+
+### Fixed
+- update spiffs offset and sizes in firmware and partitions configuration
+
+
+## [1.2.56] - 2025-02-19
+### Added
+- update version to 1.2.56 and adjust firmware and partition settings
+
+### Changed
+- remove redundant comment from Gitea release workflow
+
+
+## [1.2.55] - 2025-02-19
+### Added
+- update version to 1.2.55 and adjust Gitea release workflow to remove 'v' prefix from version
+
+
+## [1.2.54] - 2025-02-19
+### Added
+- update version to 1.2.54 and add check for missing changelog in Gitea release workflow
+
+
+## [1.2.53] - 2025-02-19
+### Added
+- update version to 1.2.53 and enhance Gitea release workflow to handle missing changelog
+
+
+## [1.2.52] - 2025-02-19
+### Added
+- update version to 1.2.52 and improve Gitea release workflow output handling
+
+
+## [1.2.51] - 2025-02-19
+### Added
+- update version to 1.2.51 and add debug output in Gitea release workflow
+
+
+## [1.2.50] - 2025-02-19
+### Added
+- update version to 1.2.50 and remove obsolete build workflow
+
+
+## [1.2.49] - 2025-02-19
+### Added
+- update version to 1.2.49 and modify changelog reading in Gitea release workflow
+
+
+## [1.2.48] - 2025-02-19
+### Added
+- update version to 1.2.48 and modify changelog reading in release workflows
+
+
+## [1.2.47] - 2025-02-19
+### Added
+- update version to 1.2.47 and modify changelog reading in GitHub release workflow
+
+
+## [1.2.46] - 2025-02-19
+### Added
+- update Gitea release workflow to include changelog and increment version to 1.2.46
+
+
+## [1.2.45] - 2025-02-19
+### Added
+- update Gitea release workflow to use dynamic upload URL and increment version to 1.2.45
+
+
+## [1.2.44] - 2025-02-19
+### Added
+- update Gitea release workflow to include additional outputs and increment version to 1.2.44
+
+
+## [1.2.43] - 2025-02-19
+### Added
+- update Gitea release workflow by removing unnecessary outputs and increment version to 1.2.43
+
+
+## [1.2.42] - 2025-02-19
+### Added
+- update Gitea release workflow to include additional outputs and increment version to 1.2.42
+
+
+## [1.2.41] - 2025-02-19
+### Added
+- update Gitea release workflow debug output and increment version to 1.2.41
+
+
+## [1.2.40] - 2025-02-19
+### Added
+- add inputs for Gitea release workflow and increment version to 1.2.40
+
+
+## [1.2.39] - 2025-02-19
+### Added
+- update Gitea release workflow to use Python virtual environment and increment version to 1.2.39
+
+
+## [1.2.38] - 2025-02-19
+### Added
+- update Gitea release workflow and increment version to 1.2.38
+
+
+## [1.2.37] - 2025-02-19
+### Added
+- update Gitea release workflow and increment version to 1.2.37
+
+
+## [1.2.36] - 2025-02-19
+### Added
+- update Gitea release workflow and increment version to 1.2.36
+
+
+## [1.2.35] - 2025-02-19
+### Added
+- update Gitea release workflow and version to 1.2.35
+
+
+## [1.2.34] - 2025-02-19
+### Added
+- update version to 1.2.34 and enhance Gitea and GitHub release workflows
+
+
+## [1.2.33] - 2025-02-19
+### Added
+- update version to 1.2.33 and refactor release workflows for Gitea and GitHub
+
+
+## [1.2.32] - 2025-02-19
+### Added
+- update version to 1.2.32 and adjust workflow dependencies for GitHub and Gitea releases
+
+
+## [1.2.31] - 2025-02-19
+### Added
+- update version to 1.2.31
+
+
+## [1.2.30] - 2025-02-19
+### Added
+- update version to 1.2.30 and enhance release workflows for Gitea and GitHub with improved artifact handling and changelog integration
+
+
+## [1.2.29] - 2025-02-19
+### Added
+- update version to 1.2.29 and enhance Gitea release workflow with improved error handling and debugging
+
+
+## [1.2.28] - 2025-02-19
+### Added
+- add build and release workflows for Gitea and GitHub, increment version to 1.2.28
+
+
+## [1.2.27] - 2025-02-19
+### Added
+- enhance CI workflows with provider detection and update version to 1.2.27
+
+
+## [1.2.26] - 2025-02-19
+### Added
+- update release workflows for Gitea and GitHub, increment version to 1.2.26
+
+
+## [1.2.25] - 2025-02-19
+### Added
+- update GitHub release workflows and increment version to 1.2.25
+
+
+## [1.2.24] - 2025-02-19
+### Added
+- update GitHub release workflow and increment version to 1.2.24
+
+
+## [1.2.23] - 2025-02-19
+### Added
+- update Gitea release workflow and increment version to 1.2.23
+
+
+## [1.2.22] - 2025-02-19
+### Added
+- update Gitea runner configuration and increment version to 1.2.22
+
+
+## [1.2.21] - 2025-02-19
+### Added
+- update Gitea release condition and increment version to 1.2.21
+
+
+## [1.2.20] - 2025-02-19
+### Added
+- update release workflows for GitHub and Gitea, increment version to 1.2.20
+
+
+## [1.2.19] - 2025-02-19
+### Added
+- add Gitea and GitHub release workflows for version 1.2.19
+
+
+## [1.2.18] - 2025-02-19
+### Added
+- remove Gitea and GitHub release workflows and increment version to 1.2.18
+
+
+## [1.2.17] - 2025-02-19
+### Added
+- update Gitea release workflow for version 1.2.17 and improve job structure
+
+
+## [1.2.16] - 2025-02-19
+### Added
+- update Gitea release workflow and increment version to 1.2.16
+
+
+## [1.2.15] - 2025-02-19
+### Added
+- update version to 1.2.15 and clean up Gitea release workflow
+
+
+## [1.2.14] - 2025-02-19
+### Added
+- update version to 1.2.14 and refactor release workflows for improved GitHub and Gitea support
+
+
+## [1.2.13] - 2025-02-19
+### Added
+- update version to 1.2.13 and enhance release workflow with Python setup and Gitea support
+
+
+## [1.2.12] - 2025-02-19
+### Added
+- update version to 1.2.12 and refactor release workflows for improved provider detection and execution
+
+
+## [1.2.11] - 2025-02-18
+### Added
+- update version to 1.2.11 and enhance GitHub and Gitea release workflows with input validation and improved error handling
+
+
+## [1.2.10] - 2025-02-18
+### Added
+- enhance Gitea release workflow with API connection verification and URL validation; update version to 1.2.10
+
+
+## [1.2.9] - 2025-02-18
+### Added
+- update version to 1.2.9 in platformio.ini
+- refactor GitHub and Gitea release workflows for improved version handling and firmware uploads
+
+
 ## [1.2.8] - 2025-02-18
 ### Added
 - update version to 1.2.8 in platformio.ini; refactor Gitea and GitHub release workflows

README.md

@@ -124,6 +124,24 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
     - Configure WiFi settings through the captive portal.
     - Access the web interface at `http://filaman.local` or the IP address.
 
+## GitHub Actions Configuration
+
+### Required Secrets for Gitea Releases
+
+When using Gitea as your repository host, you need to configure the following secrets in your repository:
+
+- `GITEA_API_URL`: The base URL of your Gitea instance, including protocol (e.g., `https://git.example.com`)
+- `GITEA_TOKEN`: Your Gitea access token with permissions to create releases
+- `GITEA_REPOSITORY`: The repository name in format `owner/repo` (e.g., `username/filaman`)
+
+Example values:
+```
+GITEA_API_URL=https://git.example.com
+GITEA_TOKEN=abcdef1234567890
+GITEA_REPOSITORY=username/filaman
+```
+
+Make sure to set these secrets in your repository settings under Settings > Secrets and Variables > Actions.
 
 ## Documentation
 

html/header.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.4</span></h1>
+                <h1>FilaMan<span class="version">v1.2.81</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/index.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.4</span></h1>
+                <h1>FilaMan<span class="version">v1.2.81</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/rfid.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.4</span></h1>
+                <h1>FilaMan<span class="version">v1.2.81</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/spoolman.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.4</span></h1>
+                <h1>FilaMan<span class="version">v1.2.81</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/upgrade.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.4</span></h1>
+                <h1>FilaMan<span class="version">v1.2.81</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/waage.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.4</span></h1>
+                <h1>FilaMan<span class="version">v1.2.81</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/wifi.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.4</span></h1>
+                <h1>FilaMan<span class="version">v1.2.81</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

platformio.ini

@@ -9,7 +9,7 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [common]
-version = "1.2.8"
+version = "1.2.81"
 
 [env:esp32dev]
 platform = espressif32
@@ -59,6 +59,80 @@ build_flags =
     -DOTA_PARTITION_SUBTYPE=0x10
     -DPARTITION_TABLE_OFFSET=0x8000
     -DPARTITION_TABLE_SIZE=0x1000
+    -DCONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE=1
+    -DCONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP=1
+    -DCONFIG_BOOTLOADER_SKIP_VALIDATE_ON_POWER_ON=1
+    -DCONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0x1000
+    -DCONFIG_PARTITION_TABLE_OFFSET=0x8000
+    -DCONFIG_PARTITION_TABLE_MD5=y
+    -DBOOT_APP_PARTITION_OTA_0=1
+    
+extra_scripts = 
+    scripts/extra_script.py
+    pre:scripts/pre_build.py     ; wird zuerst ausgeführt
+    pre:scripts/pre_spiffs.py    ; wird als zweites ausgeführt
+    pre:scripts/combine_html.py  ; wird als drittes ausgeführt
+    scripts/gzip_files.py
+
+; Remove or comment out the targets line
+;targets = buildfs, build
+
+; Add a custom target to build both
+[env:esp32dev_ota]
+platform = espressif32
+board = esp32dev
+framework = arduino
+monitor_speed = 115200
+
+lib_deps =
+    tzapu/WiFiManager @ ^2.0.17
+    https://github.com/me-no-dev/ESPAsyncWebServer.git#master
+    me-no-dev/AsyncTCP @ ^1.1.1
+    bogde/HX711 @ ^0.7.5
+    adafruit/Adafruit SSD1306 @ ^2.5.13
+    adafruit/Adafruit GFX Library @ ^1.11.11
+    adafruit/Adafruit PN532 @ ^1.3.3
+    bblanchon/ArduinoJson @ ^7.3.0
+    knolleary/PubSubClient @ ^2.8
+    digitaldragon/SSLClient @ ^1.3.2
+    
+; Enable SPIFFS upload
+board_build.filesystem = spiffs
+; Update partition settings
+board_build.partitions = partitions.csv
+board_upload.flash_size = 4MB
+board_build.flash_mode = dio
+board_upload.flash_freq = "40m"
+
+build_flags = 
+    -Os
+    -ffunction-sections
+    -fdata-sections
+    -DNDEBUG
+    -mtext-section-literals
+    '-D VERSION="${common.version}"'
+    -DASYNCWEBSERVER_REGEX
+    -DCORE_DEBUG_LEVEL=1
+    -DCONFIG_ARDUHAL_LOG_COLORS=1
+    -DOTA_DEBUG=1
+    -DARDUINO_RUNNING_CORE=1
+    -DARDUINO_EVENT_RUNNING_CORE=1
+    -DCONFIG_OPTIMIZATION_LEVEL_DEBUG=1
+    -DCONFIG_ESP32_PANIC_PRINT_REBOOT
+    -DCONFIG_ARDUINO_OTA_READSIZE=1024
+    -DCONFIG_ASYNC_TCP_RUNNING_CORE=1
+    -DCONFIG_ASYNC_TCP_USE_WDT=0
+    -DCONFIG_LWIP_TCP_MSS=1460
+    -DOTA_PARTITION_SUBTYPE=0x10
+    -DPARTITION_TABLE_OFFSET=0x8000
+    -DPARTITION_TABLE_SIZE=0x1000
+    -DCONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE=1
+    -DCONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP=1
+    -DCONFIG_BOOTLOADER_SKIP_VALIDATE_ON_POWER_ON=1
+    -DCONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0x1000
+    -DCONFIG_PARTITION_TABLE_OFFSET=0x8000
+    -DCONFIG_PARTITION_TABLE_MD5=y
+    -DBOOT_APP_PARTITION_OTA_0=1
     
 extra_scripts = 
     scripts/extra_script.py
@@ -72,5 +146,5 @@ extra_scripts =
 
 ; Add a custom target to build both
 [platformio]
-default_envs = esp32dev
+default_envs = esp32dev, esp32dev_ota
 

src/bambu.h

@@ -36,4 +36,5 @@ void mqtt_loop(void * parameter);
 bool setBambuSpool(String payload);
 void bambu_restart();
 
+extern TaskHandle_t BambuMqttTask;
 #endif

src/ota.cpp

@@ -3,44 +3,75 @@
 #include <Update.h>
 #include <SPIFFS.h>
 #include "commonFS.h"
+#include "bambu.h"
+#include "scale.h"
+#include "nfc.h"
+
+static bool tasksAreStopped = false;
+
+void stopAllTasks() {
+    Serial.println("Stopping RFID Reader");
+    if (RfidReaderTask) vTaskSuspend(RfidReaderTask);
+    Serial.println("Stopping Bambu");
+    if (BambuMqttTask) vTaskSuspend(BambuMqttTask);
+    Serial.println("Stopping Scale");
+    if (ScaleTask) vTaskSuspend(ScaleTask);
+    vTaskDelay(100 / portTICK_PERIOD_MS);
+    Serial.println("All tasks stopped");
+}
 
 void handleOTAUpload(AsyncWebServerRequest *request, String filename, size_t index, uint8_t *data, size_t len, bool final) {
-    static size_t contentLength = 0;
-    
     if (!index) {
-        contentLength = request->contentLength();
+        bool isFullImage = filename.endsWith("full.bin");
-        Serial.printf("Update size: %u bytes\n", contentLength);
+        Serial.printf("Update Start: %s (type: %s)\n", filename.c_str(), isFullImage ? "full" : "OTA");
         
-        if (contentLength == 0) {
+        if (request->contentLength() == 0) {
             request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Invalid file size\"}");
             return;
         }
 
-        if (!Update.begin(contentLength)) {
+        if (!tasksAreStopped && (RfidReaderTask || BambuMqttTask || ScaleTask)) {
-            Serial.printf("Not enough space: %u required\n", contentLength);
+            stopAllTasks();
-            request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Not enough space available\"}");
+            tasksAreStopped = true;
-            return;
         }
 
-        Serial.println("Update started");
+        bool success;
+        if (isFullImage) {
+            // Full image update ohne Magic Byte Check, aber mit U_FLASH
+            success = Update.begin(UPDATE_SIZE_UNKNOWN, U_FLASH);
+        } else {
+            // Normales OTA update mit Magic Byte Check
+            if (data[0] != 0xE9) {
+                Serial.printf("Wrong magic byte: 0x%02X (expected 0xE9)\n", data[0]);
+                request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Invalid firmware format\"}");
+                return;
+            }
+            success = Update.begin(request->contentLength());
+        }
+
+        if (!success) {
+            Update.printError(Serial);
+            request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Update start failed\"}");
+            return;
+        }
     }
 
     if (Update.write(data, len) != len) {
         Update.printError(Serial);
-        request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Error writing update\"}");
+        request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Write failed\"}");
         return;
     }
 
     if (final) {
-        if (Update.end(true)) {
+        if (!Update.end(true)) {
-            Serial.println("Update complete");
-            request->send(200, "application/json", "{\"status\":\"success\",\"message\":\"Update successful! Device will restart...\",\"restart\":true}");
-            delay(1000);
-            ESP.restart();
-        } else {
             Update.printError(Serial);
             request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Update failed\"}");
+            return;
         }
+        Serial.println("Update successful, restarting...");
+        request->send(200, "application/json", "{\"status\":\"success\",\"message\":\"Update successful! Device will restart...\",\"restart\":true}");
+        delay(500);
+        ESP.restart();
     }
 }
 

src/ota.h

@@ -3,6 +3,12 @@
 
 #include <ESPAsyncWebServer.h>
 
+// Update size unknown constant, falls nicht bereits definiert
+#ifndef UPDATE_SIZE_UNKNOWN
+#define UPDATE_SIZE_UNKNOWN 0xFFFFFFFF
+#endif
+
+void stopAllTasks();
 void handleOTAUpload(AsyncWebServerRequest *request, String filename, size_t index, uint8_t *data, size_t len, bool final);
 
 #endif

src/scale.h

@@ -15,4 +15,6 @@ extern uint8_t weigthCouterToApi;
 extern uint8_t scale_tare_counter;
 extern uint8_t pauseMainTask;
 
+extern TaskHandle_t ScaleTask;
+
 #endif

src/wlan.cpp

@@ -12,7 +12,7 @@ bool wm_nonblocking = false;
 void initWiFi() {
     WiFi.mode(WIFI_STA); // explicitly set mode, esp defaults to STA+AP
   
-    esp_wifi_set_max_tx_power(72); // Setze maximale Sendeleistung auf 20dBm
+    //esp_wifi_set_max_tx_power(72); // Setze maximale Sendeleistung auf 20dBm
   
     if(wm_nonblocking) wm.setConfigPortalBlocking(false);
     wm.setConfigPortalTimeout(320); // Portal nach 5min schließen