docs: update changelog for version 1.2.59

.github/workflows/providers/build.yml

@@ -1,87 +0,0 @@
-name: Build Firmware
-
-on:
-  workflow_call:
-    outputs:
-      version:
-        description: "The version from the tag"
-        value: ${{ jobs.build.outputs.version }}
-      changelog:
-        description: "The changelog for the current version"
-        value: ${{ jobs.build.outputs.changelog }}
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    outputs:
-      version: ${{ steps.get_version.outputs.VERSION }}
-      changelog: ${{ steps.changelog.outputs.CHANGES }}
-    steps:
-    - uses: actions/checkout@v4
-    
-    - name: Set up Python
-      uses: actions/setup-python@v4
-      with:
-        python-version: '3.x'
-    
-    - name: Install PlatformIO
-      run: |
-        python -m pip install --upgrade pip
-        pip install --upgrade platformio
-    
-    - name: Build Firmware
-      run: |
-        pio run -t buildfs  # Build SPIFFS
-        pio run            # Build firmware
-        
-    - name: Install esptool
-      run: |
-        pip install esptool
-        
-    - name: Merge firmware and SPIFFS
-      run: |
-        esptool.py --chip esp32 merge_bin \
-          --flash_mode dio \
-          --flash_freq 40m \
-          --flash_size 4MB \
-          -o .pio/build/esp32dev/filaman_full.bin \
-          0x1000 .pio/build/esp32dev/bootloader.bin \
-          0x8000 .pio/build/esp32dev/partitions.bin \
-          0x10000 .pio/build/esp32dev/firmware.bin \
-          0x290000 .pio/build/esp32dev/spiffs.bin
-
-    - name: Prepare OTA firmware
-      run: |
-        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_ota.bin
-    
-    - name: Get version from tag
-      id: get_version
-      run: |
-        if [ -n "$GITEA_REF" ]; then
-          echo "VERSION=${GITEA_REF#refs/tags/v}" >> $GITEA_OUTPUT
-        else
-          echo "VERSION=${GITHUB_REF#refs/tags/v}" >> $GITHUB_OUTPUT
-        fi
-      
-    - name: Read CHANGELOG.md
-      id: changelog
-      run: |
-        VERSION=${{ steps.get_version.outputs.VERSION }}
-        CHANGELOG=$(awk "/## \\[$VERSION\\]/{p=1;print;next} /## \\[/{p=0} p" CHANGELOG.md)
-        if [ -n "$GITEA_OUTPUT" ]; then
-          echo "CHANGES<<EOF" >> $GITEA_OUTPUT
-          echo "$CHANGELOG" >> $GITEA_OUTPUT
-          echo "EOF" >> $GITEA_OUTPUT
-        else
-          echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
-          echo "$CHANGELOG" >> $GITHUB_OUTPUT
-          echo "EOF" >> $GITHUB_OUTPUT
-        fi
-    
-    - name: Upload artifacts
-      uses: actions/upload-artifact@v3
-      with:
-        name: firmware
-        path: |
-          .pio/build/esp32dev/filaman_full.bin
-          .pio/build/esp32dev/filaman_ota.bin

.github/workflows/providers/gitea-release.yml

@@ -2,36 +2,60 @@ name: Gitea Release
 
 on:
   workflow_call:
+    inputs:
+      gitea_ref_name:
+        description: 'Gitea ref name'
+        required: true
+        type: string
+      gitea_server_url:
+        description: 'Gitea server URL'
+        required: true
+        type: string
+      gitea_repository:
+        description: 'Gitea repository'
+        required: true
+        type: string
+    secrets:
+      GITEA_TOKEN:
+        required: true
 
 jobs:
   create-release:
     runs-on: ubuntu-latest
-    permissions:
-      contents: write
     steps:
-    - uses: actions/checkout@v4
+    - name: Checkout Repository
+      uses: actions/checkout@v4
 
-    - name: Set up Python
+    - name: Install System Dependencies
-      uses: actions/setup-python@v4
-      with:
-        python-version: '3.x'
-    
-    - name: Install PlatformIO
       run: |
-        python -m pip install --upgrade pip
+        sudo apt-get update
-        pip install --upgrade platformio
+        sudo apt-get install -y python3 python3-venv build-essential curl git
+
+    - name: Set up Python Virtual Environment
+      run: |
+        python3 -m venv venv
+        source venv/bin/activate
+        pip install --upgrade pip
+        pip install platformio esptool
+        
+        echo "Verifying installations:"
+        platformio --version
+        python3 --version
+        esptool.py version
 
     - name: Build Firmware
       run: |
-        pio run -t buildfs  # Build SPIFFS
+        source venv/bin/activate
-        pio run            # Build firmware
+        echo "Building SPIFFS..."
+        platformio run -t buildfs
         
-    - name: Install esptool
+        echo "Building firmware..."
-      run: |
+        platformio run
-        pip install esptool
 
-    - name: Merge firmware and SPIFFS
+    - name: Create Release Files
       run: |
+        source venv/bin/activate
+        echo "Creating release files..."
         esptool.py --chip esp32 merge_bin \
           --flash_mode dio \
           --flash_freq 40m \
@@ -40,141 +64,71 @@ jobs:
           0x1000 .pio/build/esp32dev/bootloader.bin \
           0x8000 .pio/build/esp32dev/partitions.bin \
           0x10000 .pio/build/esp32dev/firmware.bin \
-          0x290000 .pio/build/esp32dev/spiffs.bin
+          0x3D0000 .pio/build/esp32dev/spiffs.bin
         
-    - name: Prepare OTA firmware
-      run: |
         cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_ota.bin
 
-    - name: Get version from tag
-      id: get_version
-      run: |
-        TAG="${GITEA_REF_NAME}"
-        VERSION="${TAG#v}"
-        echo "VERSION=$VERSION" >> $GITEA_OUTPUT
-      
     - name: Read CHANGELOG.md
       id: changelog
       run: |
-        VERSION=${{ steps.get_version.outputs.VERSION }}
+        VERSION=$(echo "${{ inputs.gitea_ref_name }}" | sed 's/^v//')
         CHANGELOG=$(awk "/## \\[$VERSION\\]/{p=1;print;next} /## \\[/ {p=0} p" CHANGELOG.md)
-        echo "CHANGES<<EOF" >> $GITEA_OUTPUT
+        echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
-        echo "$CHANGELOG" >> $GITEA_OUTPUT
+        echo "$CHANGELOG" >> $GITHUB_OUTPUT
-        echo "EOF" >> $GITEA_OUTPUT
+        echo "EOF" >> $GITHUB_OUTPUT
-
+        echo "CHANGELOG CONTENT:"
-    - name: Create Gitea Release
+        echo "$CHANGELOG"
-      env:
+        if [ -z "$CHANGELOG" ]; then
-        GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }}
+          echo "No changelog found for version $VERSION"
-      run: |
-        # Debug: Print all environment variables (excluding the token)
-        env | grep -v "GITEA_TOKEN"
-        
-        # Remove trailing slash from server URL if present
-        SERVER_URL="${GITEA_SERVER_URL%/}"
-        REPO="${GITEA_REPOSITORY}"
-        TAG="${GITEA_REF_NAME}"
-        VERSION="${TAG#v}"  # Remove v prefix if present
-        
-        echo "Debug environment:"
-        echo "Server URL: $SERVER_URL"
-        echo "Repository: $REPO"
-        echo "Tag: $TAG"
-        echo "Version: $VERSION"
-        
-        # Test API connectivity
-        echo "Testing API connectivity..."
-        TEST_RESPONSE=$(curl -v -k -H "Authorization: token ${GITEA_TOKEN}" "${SERVER_URL}/api/v1/version" 2>&1)
-        echo "API Test Response:"
-        echo "$TEST_RESPONSE"
-        
-        # Construct clean API URL
-        API_URL="${SERVER_URL}/api/v1"
-        RELEASE_URL="${API_URL}/repos/${REPO}/releases"
-        
-        echo "Using Release API URL: $RELEASE_URL"
-        
-        # Common curl options
-        CURL_OPTS="-v -k"  # -v for verbose, -k to ignore SSL verification
-        
-        # Create release with minimal data first
-        echo "Creating release..."
-        RELEASE_RESPONSE=$(curl $CURL_OPTS -X POST \
-          -H "accept: application/json" \
-          -H "Authorization: token ${GITEA_TOKEN}" \
-          -H "Content-Type: application/json" \
-          -d "{\"tag_name\":\"${TAG}\",\"name\":\"Release ${VERSION}\",\"draft\":false,\"prerelease\":false}" \
-          "${RELEASE_URL}" 2>&1)
-        
-        echo "Full release creation response (including headers):"
-        echo "$RELEASE_RESPONSE"
-        
-        # Extract the JSON response (last line)
-        RELEASE_JSON=$(echo "$RELEASE_RESPONSE" | tail -n 1)
-        echo "Release JSON response:"
-        echo "$RELEASE_JSON" | jq '.' || echo "Failed to parse JSON response"
-        
-        # Get release ID
-        RELEASE_ID=$(echo "$RELEASE_JSON" | jq -r '.id')
-        
-        if [ -z "$RELEASE_ID" ] || [ "$RELEASE_ID" = "null" ]; then
-          echo "Failed to create release. Full response:"
-          echo "$RELEASE_RESPONSE"
-          # Try to get more detailed error information
-          ERROR_MSG=$(echo "$RELEASE_JSON" | jq -r '.message // .error // "Unknown error"')
-          echo "Error message: $ERROR_MSG"
           exit 1
         fi
 
-        echo "Successfully created release with ID: $RELEASE_ID"
+    - name: Create Release
+      env:
+        TOKEN: ${{ secrets.GITEA_TOKEN }}
+        GITEA_REF_NAME: ${{ inputs.gitea_ref_name }}
+        GITEA_SERVER_URL: ${{ inputs.gitea_server_url }}
+        GITEA_REPOSITORY: ${{ inputs.gitea_repository }}
+        CHANGELOG: ${{ steps.changelog.outputs.CHANGES }}
+      run: |
+        echo "Debug environment:"
+        echo "GITEA_REF_NAME: ${GITEA_REF_NAME}"
+        echo "GITEA_SERVER_URL: ${GITEA_SERVER_URL}"
+        echo "GITEA_REPOSITORY: ${GITEA_REPOSITORY}"
+        echo "CHANGELOG: ${CHANGELOG}"
         
-        # Upload assets
+        TAG="${GITEA_REF_NAME}"
+        API_URL="${GITEA_SERVER_URL}/api/v1"
+        REPO="${GITEA_REPOSITORY}"
+        
+        echo "Creating release for ${TAG} on ${REPO}..."
+        
+        # Create release
+        RESPONSE=$(curl -k -s \
+          -X POST \
+          -H "Authorization: token ${TOKEN}" \
+          -H "Content-Type: application/json" \
+          -d "{\"tag_name\":\"${TAG}\",\"name\":\"Release ${TAG}\",\"body\":\"${CHANGELOG}\"}" \
+          "${API_URL}/repos/${REPO}/releases")
+        
+        RELEASE_ID=$(echo "$RESPONSE" | grep -o '"id":[0-9]*' | cut -d':' -f2 | head -n1)
+        UPLOAD_URL=$(echo "$RESPONSE" | grep -o '"upload_url":"[^"]*' | cut -d':' -f2- | tr -d '"')
+        
+        if [ -n "$RELEASE_ID" ]; then
+          echo "Release created with ID: $RELEASE_ID"
+          
+          # Upload files
           for file in "filaman_full.bin" "filaman_ota.bin"; do
             echo "Uploading $file..."
-          UPLOAD_URL="${RELEASE_URL}/${RELEASE_ID}/assets?name=${file}"
+            curl -k -s \
-          echo "Upload URL: $UPLOAD_URL"
+              -X POST \
-          
+              -H "Authorization: token ${TOKEN}" \
-          UPLOAD_RESPONSE=$(curl $CURL_OPTS -X POST \
-            -H "accept: application/json" \
-            -H "Authorization: token ${GITEA_TOKEN}" \
               -H "Content-Type: application/octet-stream" \
-            --data-binary "@.pio/build/esp32dev/${file}" \
+              --data-binary "@.pio/build/esp32dev/$file" \
-            "${UPLOAD_URL}" 2>&1)
+              "${UPLOAD_URL}?name=$file"
-          
+          done
-          echo "Full upload response for $file (including headers):"
+        else
-          echo "$UPLOAD_RESPONSE"
+          echo "Failed to create release. Response:"
-          
+          echo "$RESPONSE"
-          # Extract the JSON response (last line)
-          UPLOAD_JSON=$(echo "$UPLOAD_RESPONSE" | tail -n 1)
-          echo "Upload JSON response:"
-          echo "$UPLOAD_JSON" | jq '.' || echo "Failed to parse JSON response"
-          
-          if ! echo "$UPLOAD_JSON" | jq -e '.id' > /dev/null; then
-            echo "Failed to upload $file. Full response:"
-            echo "$UPLOAD_RESPONSE"
-            ERROR_MSG=$(echo "$UPLOAD_JSON" | jq -r '.message // .error // "Unknown error"')
-            echo "Error message: $ERROR_MSG"
           exit 1
         fi
-          
-          echo "Successfully uploaded $file"
-        done
-        
-        # Update release with full description after successful file upload
-        echo "Updating release description..."
-        CHANGELOG='${{ steps.changelog.outputs.CHANGES }}'
-        UPDATE_RESPONSE=$(curl $CURL_OPTS -X PATCH \
-          -H "accept: application/json" \
-          -H "Authorization: token ${GITEA_TOKEN}" \
-          -H "Content-Type: application/json" \
-          -d "{\"body\":$(echo "$CHANGELOG" | jq -R -s .)}" \
-          "${RELEASE_URL}/${RELEASE_ID}" 2>&1)
-        
-        echo "Full update response (including headers):"
-        echo "$UPDATE_RESPONSE"
-        
-        # Extract the JSON response (last line)
-        UPDATE_JSON=$(echo "$UPDATE_RESPONSE" | tail -n 1)
-        echo "Update JSON response:"
-        echo "$UPDATE_JSON" | jq '.' || echo "Failed to parse JSON response"
-        
-        echo "Release process completed"

.github/workflows/providers/github-release.yml

@@ -40,7 +40,7 @@ jobs:
           0x1000 .pio/build/esp32dev/bootloader.bin \
           0x8000 .pio/build/esp32dev/partitions.bin \
           0x10000 .pio/build/esp32dev/firmware.bin \
-          0x290000 .pio/build/esp32dev/spiffs.bin
+          0x3D0000 .pio/build/esp32dev/spiffs.bin
 
     - name: Prepare OTA firmware
       run: |

.github/workflows/release.yml

@@ -10,6 +10,9 @@ jobs:
     runs-on: ubuntu-latest
     outputs:
       provider: ${{ steps.provider.outputs.provider }}
+      gitea_ref_name: ${{ steps.provider.outputs.gitea_ref_name }}
+      gitea_server_url: ${{ steps.provider.outputs.gitea_server_url }}
+      gitea_repository: ${{ steps.provider.outputs.gitea_repository }}
     steps:
       - name: Checkout Repository
         uses: actions/checkout@v3
@@ -20,26 +23,24 @@ jobs:
           echo "GITHUB_ACTIONS=${GITHUB_ACTIONS:-not set}"
           echo "GITEA_ACTIONS=${GITEA_ACTIONS:-not set}"
           echo "GITEA_REPOSITORY=${GITEA_REPOSITORY:-not set}"
+          echo "GITEA_SERVER_URL=${GITEA_SERVER_URL:-not set}"
           echo "RUNNER_NAME=${RUNNER_NAME:-not set}"
 
       - name: Determine CI Provider
         id: provider
         shell: bash
         run: |
-          # Initialize provider as unknown
-          PROVIDER="unknown"
-          
-          # Check for Gitea specific environment first
           if [ -n "${GITEA_ACTIONS}" ] || [ -n "${GITEA_REPOSITORY}" ] || [[ "${RUNNER_NAME}" == *"gitea"* ]]; then
-            PROVIDER="gitea"
+            echo "provider=gitea" >> "$GITHUB_OUTPUT"
-          # Then check for GitHub
+            echo "gitea_ref_name=${GITHUB_REF_NAME}" >> "$GITHUB_OUTPUT"
+            echo "gitea_server_url=${GITHUB_SERVER_URL}" >> "$GITHUB_OUTPUT"
+            echo "gitea_repository=${GITHUB_REPOSITORY}" >> "$GITHUB_OUTPUT"
           elif [ "${GITHUB_ACTIONS}" = "true" ]; then
-            PROVIDER="github"
+            echo "provider=github" >> "$GITHUB_OUTPUT"
+          else
+            echo "provider=unknown" >> "$GITHUB_OUTPUT"
           fi
 
-          echo "Detected provider: ${PROVIDER}"
-          echo "provider=${PROVIDER}" >> "${GITHUB_OUTPUT}"
-
   verify-provider:
     needs: route
     runs-on: ubuntu-latest
@@ -61,3 +62,9 @@ jobs:
     needs: [route, verify-provider]
     if: needs.route.outputs.provider == 'gitea'
     uses: ./.github/workflows/providers/gitea-release.yml
+    with:
+      gitea_ref_name: ${{ needs.route.outputs.gitea_ref_name }}
+      gitea_server_url: ${{ needs.route.outputs.gitea_server_url }}
+      gitea_repository: ${{ needs.route.outputs.gitea_repository }}
+    secrets:
+      GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }}

CHANGELOG.md

@@ -1,5 +1,149 @@
 # Changelog
 
+## [1.2.59] - 2025-02-20
+### Added
+- update version to 1.2.59 and enhance OTA upload handling
+
+### Changed
+- update webpages for version 1.2.59
+
+
+## [1.2.58] - 2025-02-20
+### Added
+- update version to 1.2.58 in HTML files and platformio configuration
+
+
+## [1.2.57] - 2025-02-20
+### Added
+- update version to 1.2.57 in platformio configuration
+
+### Fixed
+- update spiffs offset and sizes in firmware and partitions configuration
+
+
+## [1.2.56] - 2025-02-19
+### Added
+- update version to 1.2.56 and adjust firmware and partition settings
+
+### Changed
+- remove redundant comment from Gitea release workflow
+
+
+## [1.2.55] - 2025-02-19
+### Added
+- update version to 1.2.55 and adjust Gitea release workflow to remove 'v' prefix from version
+
+
+## [1.2.54] - 2025-02-19
+### Added
+- update version to 1.2.54 and add check for missing changelog in Gitea release workflow
+
+
+## [1.2.53] - 2025-02-19
+### Added
+- update version to 1.2.53 and enhance Gitea release workflow to handle missing changelog
+
+
+## [1.2.52] - 2025-02-19
+### Added
+- update version to 1.2.52 and improve Gitea release workflow output handling
+
+
+## [1.2.51] - 2025-02-19
+### Added
+- update version to 1.2.51 and add debug output in Gitea release workflow
+
+
+## [1.2.50] - 2025-02-19
+### Added
+- update version to 1.2.50 and remove obsolete build workflow
+
+
+## [1.2.49] - 2025-02-19
+### Added
+- update version to 1.2.49 and modify changelog reading in Gitea release workflow
+
+
+## [1.2.48] - 2025-02-19
+### Added
+- update version to 1.2.48 and modify changelog reading in release workflows
+
+
+## [1.2.47] - 2025-02-19
+### Added
+- update version to 1.2.47 and modify changelog reading in GitHub release workflow
+
+
+## [1.2.46] - 2025-02-19
+### Added
+- update Gitea release workflow to include changelog and increment version to 1.2.46
+
+
+## [1.2.45] - 2025-02-19
+### Added
+- update Gitea release workflow to use dynamic upload URL and increment version to 1.2.45
+
+
+## [1.2.44] - 2025-02-19
+### Added
+- update Gitea release workflow to include additional outputs and increment version to 1.2.44
+
+
+## [1.2.43] - 2025-02-19
+### Added
+- update Gitea release workflow by removing unnecessary outputs and increment version to 1.2.43
+
+
+## [1.2.42] - 2025-02-19
+### Added
+- update Gitea release workflow to include additional outputs and increment version to 1.2.42
+
+
+## [1.2.41] - 2025-02-19
+### Added
+- update Gitea release workflow debug output and increment version to 1.2.41
+
+
+## [1.2.40] - 2025-02-19
+### Added
+- add inputs for Gitea release workflow and increment version to 1.2.40
+
+
+## [1.2.39] - 2025-02-19
+### Added
+- update Gitea release workflow to use Python virtual environment and increment version to 1.2.39
+
+
+## [1.2.38] - 2025-02-19
+### Added
+- update Gitea release workflow and increment version to 1.2.38
+
+
+## [1.2.37] - 2025-02-19
+### Added
+- update Gitea release workflow and increment version to 1.2.37
+
+
+## [1.2.36] - 2025-02-19
+### Added
+- update Gitea release workflow and increment version to 1.2.36
+
+
+## [1.2.35] - 2025-02-19
+### Added
+- update Gitea release workflow and version to 1.2.35
+
+
+## [1.2.34] - 2025-02-19
+### Added
+- update version to 1.2.34 and enhance Gitea and GitHub release workflows
+
+
+## [1.2.33] - 2025-02-19
+### Added
+- update version to 1.2.33 and refactor release workflows for Gitea and GitHub
+
+
 ## [1.2.32] - 2025-02-19
 ### Added
 - update version to 1.2.32 and adjust workflow dependencies for GitHub and Gitea releases

html/header.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.29</span></h1>
+                <h1>FilaMan<span class="version">v1.2.59</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/index.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.29</span></h1>
+                <h1>FilaMan<span class="version">v1.2.59</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/rfid.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.29</span></h1>
+                <h1>FilaMan<span class="version">v1.2.59</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/spoolman.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.29</span></h1>
+                <h1>FilaMan<span class="version">v1.2.59</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/upgrade.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.29</span></h1>
+                <h1>FilaMan<span class="version">v1.2.59</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/waage.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.29</span></h1>
+                <h1>FilaMan<span class="version">v1.2.59</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/wifi.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.29</span></h1>
+                <h1>FilaMan<span class="version">v1.2.59</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

platformio.ini

@@ -9,7 +9,7 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [common]
-version = "1.2.32"
+version = "1.2.59"
 
 [env:esp32dev]
 platform = espressif32

src/ota.cpp

@@ -16,15 +16,19 @@ void handleOTAUpload(AsyncWebServerRequest *request, String filename, size_t ind
             return;
         }
 
-        if (!Update.begin(contentLength)) {
+        // Determine if this is a full image (firmware + SPIFFS) or just firmware
+        bool isFullImage = (contentLength > 0x3D0000); // SPIFFS starts at 0x3D0000
+
+        if (!Update.begin(contentLength, isFullImage ? U_FLASH : U_SPIFFS)) {
             Serial.printf("Not enough space: %u required\n", contentLength);
             request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Not enough space available\"}");
             return;
         }
         
-        Serial.println("Update started");
+        Serial.println(isFullImage ? "Full image update started" : "Firmware update started");
     }
     
+    // Write chunk to flash
     if (Update.write(data, len) != len) {
         Update.printError(Serial);
         request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Error writing update\"}");