docs: update changelog for version 1.2.44

.github/workflows/providers/build.yml

@@ -0,0 +1,87 @@
+name: Build Firmware
+
+on:
+  workflow_call:
+    outputs:
+      version:
+        description: "The version from the tag"
+        value: ${{ jobs.build.outputs.version }}
+      changelog:
+        description: "The changelog for the current version"
+        value: ${{ jobs.build.outputs.changelog }}
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    outputs:
+      version: ${{ steps.get_version.outputs.VERSION }}
+      changelog: ${{ steps.changelog.outputs.CHANGES }}
+    steps:
+    - uses: actions/checkout@v4
+    
+    - name: Set up Python
+      uses: actions/setup-python@v4
+      with:
+        python-version: '3.x'
+    
+    - name: Install PlatformIO
+      run: |
+        python -m pip install --upgrade pip
+        pip install --upgrade platformio
+    
+    - name: Build Firmware
+      run: |
+        pio run -t buildfs  # Build SPIFFS
+        pio run            # Build firmware
+        
+    - name: Install esptool
+      run: |
+        pip install esptool
+        
+    - name: Merge firmware and SPIFFS
+      run: |
+        esptool.py --chip esp32 merge_bin \
+          --flash_mode dio \
+          --flash_freq 40m \
+          --flash_size 4MB \
+          -o .pio/build/esp32dev/filaman_full.bin \
+          0x1000 .pio/build/esp32dev/bootloader.bin \
+          0x8000 .pio/build/esp32dev/partitions.bin \
+          0x10000 .pio/build/esp32dev/firmware.bin \
+          0x290000 .pio/build/esp32dev/spiffs.bin
+
+    - name: Prepare OTA firmware
+      run: |
+        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_ota.bin
+    
+    - name: Get version from tag
+      id: get_version
+      run: |
+        if [ -n "$GITEA_REF" ]; then
+          echo "VERSION=${GITEA_REF#refs/tags/v}" >> $GITEA_OUTPUT
+        else
+          echo "VERSION=${GITHUB_REF#refs/tags/v}" >> $GITHUB_OUTPUT
+        fi
+      
+    - name: Read CHANGELOG.md
+      id: changelog
+      run: |
+        VERSION=${{ steps.get_version.outputs.VERSION }}
+        CHANGELOG=$(awk "/## \\[$VERSION\\]/{p=1;print;next} /## \\[/{p=0} p" CHANGELOG.md)
+        if [ -n "$GITEA_OUTPUT" ]; then
+          echo "CHANGES<<EOF" >> $GITEA_OUTPUT
+          echo "$CHANGELOG" >> $GITEA_OUTPUT
+          echo "EOF" >> $GITEA_OUTPUT
+        else
+          echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
+          echo "$CHANGELOG" >> $GITHUB_OUTPUT
+          echo "EOF" >> $GITHUB_OUTPUT
+        fi
+    
+    - name: Upload artifacts
+      uses: actions/upload-artifact@v3
+      with:
+        name: firmware
+        path: |
+          .pio/build/esp32dev/filaman_full.bin
+          .pio/build/esp32dev/filaman_ota.bin

.github/workflows/providers/gitea-release.yml

@@ -0,0 +1,116 @@
+name: Gitea Release
+
+on:
+  workflow_call:
+    inputs:
+      gitea_ref_name:
+        description: 'Gitea ref name'
+        required: true
+        type: string
+      gitea_server_url:
+        description: 'Gitea server URL'
+        required: true
+        type: string
+      gitea_repository:
+        description: 'Gitea repository'
+        required: true
+        type: string
+    secrets:
+      GITEA_TOKEN:
+        required: true
+
+jobs:
+  create-release:
+    runs-on: ubuntu-latest
+    steps:
+    - name: Checkout Repository
+      uses: actions/checkout@v4
+
+    - name: Install System Dependencies
+      run: |
+        sudo apt-get update
+        sudo apt-get install -y python3 python3-venv build-essential curl git
+
+    - name: Set up Python Virtual Environment
+      run: |
+        python3 -m venv venv
+        source venv/bin/activate
+        pip install --upgrade pip
+        pip install platformio esptool
+        
+        echo "Verifying installations:"
+        platformio --version
+        python3 --version
+        esptool.py version
+
+    - name: Build Firmware
+      run: |
+        source venv/bin/activate
+        echo "Building SPIFFS..."
+        platformio run -t buildfs
+        
+        echo "Building firmware..."
+        platformio run
+
+    - name: Create Release Files
+      run: |
+        source venv/bin/activate
+        echo "Creating release files..."
+        esptool.py --chip esp32 merge_bin \
+          --flash_mode dio \
+          --flash_freq 40m \
+          --flash_size 4MB \
+          -o .pio/build/esp32dev/filaman_full.bin \
+          0x1000 .pio/build/esp32dev/bootloader.bin \
+          0x8000 .pio/build/esp32dev/partitions.bin \
+          0x10000 .pio/build/esp32dev/firmware.bin \
+          0x290000 .pio/build/esp32dev/spiffs.bin
+        
+        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_ota.bin
+
+    - name: Create Release
+      env:
+        TOKEN: ${{ secrets.GITEA_TOKEN }}
+        GITEA_REF_NAME: ${{ inputs.gitea_ref_name }}
+        GITEA_SERVER_URL: ${{ inputs.gitea_server_url }}
+        GITEA_REPOSITORY: ${{ inputs.gitea_repository }}
+      run: |
+        echo "Debug environment:"
+        echo "GITEA_REF_NAME: ${GITEA_REF_NAME}"
+        echo "GITEA_SERVER_URL: ${GITEA_SERVER_URL}"
+        echo "GITEA_REPOSITORY: ${GITEA_REPOSITORY}"
+        
+        TAG="${GITEA_REF_NAME}"
+        API_URL="${GITEA_SERVER_URL}/api/v1"
+        REPO="${GITEA_REPOSITORY}"
+        
+        echo "Creating release for ${TAG} on ${REPO}..."
+        
+        # Create release
+        RESPONSE=$(curl -k -s \
+          -X POST \
+          -H "Authorization: token ${TOKEN}" \
+          -H "Content-Type: application/json" \
+          -d "{\"tag_name\":\"${TAG}\",\"name\":\"Release ${TAG}\"}" \
+          "${API_URL}/repos/${REPO}/releases")
+        
+        RELEASE_ID=$(echo "$RESPONSE" | grep -o '"id":[0-9]*' | cut -d':' -f2 | head -n1)
+        
+        if [ -n "$RELEASE_ID"; then
+          echo "Release created with ID: $RELEASE_ID"
+          
+          # Upload files
+          for file in "filaman_full.bin" "filaman_ota.bin"; do
+            echo "Uploading $file..."
+            curl -k -s \
+              -X POST \
+              -H "Authorization: token ${TOKEN}" \
+              -H "Content-Type: application/octet-stream" \
+              --data-binary "@.pio/build/esp32dev/$file" \
+              "${API_URL}/repos/${REPO}/releases/${RELEASE_ID}/assets?name=$file"
+          done
+        else
+          echo "Failed to create release. Response:"
+          echo "$RESPONSE"
+          exit 1
+        fi

.github/workflows/providers/github-release.yml

@@ -0,0 +1,71 @@
+name: GitHub Release
+
+on:
+  workflow_call:
+
+jobs:
+  create-release:
+    runs-on: ubuntu-latest
+    permissions:
+      contents: write
+    steps:
+    - uses: actions/checkout@v4
+    
+    - name: Set up Python
+      uses: actions/setup-python@v4
+      with:
+        python-version: '3.x'
+    
+    - name: Install PlatformIO
+      run: |
+        python -m pip install --upgrade pip
+        pip install --upgrade platformio
+    
+    - name: Build Firmware
+      run: |
+        pio run -t buildfs  # Build SPIFFS
+        pio run            # Build firmware
+        
+    - name: Install esptool
+      run: |
+        pip install esptool
+        
+    - name: Merge firmware and SPIFFS
+      run: |
+        esptool.py --chip esp32 merge_bin \
+          --flash_mode dio \
+          --flash_freq 40m \
+          --flash_size 4MB \
+          -o .pio/build/esp32dev/filaman_full.bin \
+          0x1000 .pio/build/esp32dev/bootloader.bin \
+          0x8000 .pio/build/esp32dev/partitions.bin \
+          0x10000 .pio/build/esp32dev/firmware.bin \
+          0x290000 .pio/build/esp32dev/spiffs.bin
+
+    - name: Prepare OTA firmware
+      run: |
+        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_ota.bin
+    
+    - name: Get version from tag
+      id: get_version
+      run: |
+        echo "VERSION=${GITHUB_REF#refs/tags/v}" >> $GITHUB_OUTPUT
+      
+    - name: Read CHANGELOG.md
+      id: changelog
+      run: |
+        VERSION=${{ steps.get_version.outputs.VERSION }}
+        CHANGELOG=$(awk "/## \\[$VERSION\\]/{p=1;print;next} /## \\[/{p=0} p" CHANGELOG.md)
+        echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
+        echo "$CHANGELOG" >> $GITHUB_OUTPUT
+        echo "EOF" >> $GITHUB_OUTPUT
+
+    - name: Create GitHub Release
+      env:
+        GH_TOKEN: ${{ github.token }}
+      run: |
+        gh release create "${{ github.ref_name }}" \
+          --title "Release ${{ steps.get_version.outputs.VERSION }}" \
+          --notes "${{ steps.changelog.outputs.CHANGES }}" \
+          .pio/build/esp32dev/filaman_full.bin \
+          .pio/build/esp32dev/filaman_ota.bin

.github/workflows/release.yml

@@ -1,4 +1,4 @@
-name: Release
+name: Release Workflow
 
 on:
   push:
@@ -6,105 +6,65 @@ on:
       - 'v*'
 
 jobs:
-  release:
-    runs-on: gitea-runner
+  route:
+    runs-on: ubuntu-latest
+    outputs:
+      provider: ${{ steps.provider.outputs.provider }}
+      gitea_ref_name: ${{ steps.provider.outputs.gitea_ref_name }}
+      gitea_server_url: ${{ steps.provider.outputs.gitea_server_url }}
+      gitea_repository: ${{ steps.provider.outputs.gitea_repository }}
     steps:
-      - uses: actions/checkout@v4
-      
+      - name: Checkout Repository
+        uses: actions/checkout@v3
+
       - name: Debug Environment
         run: |
-          echo "GITHUB_REF: $GITHUB_REF"
-          echo "GITHUB_SHA: $GITHUB_SHA"
-          echo "PWD: $PWD"
-          ls -la
-      
-      - name: Get version from tag
-        id: version
+          echo "CI Environment Details:"
+          echo "GITHUB_ACTIONS=${GITHUB_ACTIONS:-not set}"
+          echo "GITEA_ACTIONS=${GITEA_ACTIONS:-not set}"
+          echo "GITEA_REPOSITORY=${GITEA_REPOSITORY:-not set}"
+          echo "GITEA_SERVER_URL=${GITEA_SERVER_URL:-not set}"
+          echo "RUNNER_NAME=${RUNNER_NAME:-not set}"
+
+      - name: Determine CI Provider
+        id: provider
+        shell: bash
         run: |
-          VERSION=${GITHUB_REF#refs/tags/v}
-          echo "Raw version: ${VERSION}"
-          echo "version=${VERSION}" >> $GITHUB_OUTPUT
-          
-      - name: Get changelog
-        id: changelog
+          if [ -n "${GITEA_ACTIONS}" ] || [ -n "${GITEA_REPOSITORY}" ] || [[ "${RUNNER_NAME}" == *"gitea"* ]]; then
+            echo "provider=gitea" >> "$GITHUB_OUTPUT"
+            echo "gitea_ref_name=${GITHUB_REF_NAME}" >> "$GITHUB_OUTPUT"
+            echo "gitea_server_url=${GITHUB_SERVER_URL}" >> "$GITHUB_OUTPUT"
+            echo "gitea_repository=${GITHUB_REPOSITORY}" >> "$GITHUB_OUTPUT"
+          elif [ "${GITHUB_ACTIONS}" = "true" ]; then
+            echo "provider=github" >> "$GITHUB_OUTPUT"
+          else
+            echo "provider=unknown" >> "$GITHUB_OUTPUT"
+          fi
+
+  verify-provider:
+    needs: route
+    runs-on: ubuntu-latest
+    steps:
+      - name: Echo detected provider
         run: |
-          echo "Reading changelog for version ${{ steps.version.outputs.version }}"
-          if [ ! -f "CHANGELOG.md" ]; then
-            echo "Error: CHANGELOG.md not found"
-            ls -la
+          echo "Detected CI Provider: ${{ needs.route.outputs.provider }}"
+          if [ "${{ needs.route.outputs.provider }}" = "unknown" ]; then
+            echo "::error::Failed to detect CI provider!"
             exit 1
           fi
-          
-          CHANGELOG=$(awk "/## \\[${{ steps.version.outputs.version }}\\]/{p=1;print;next} /## \\[/{p=0} p" CHANGELOG.md)
-          if [ -z "$CHANGELOG" ]; then
-            echo "Warning: No changelog entry found for version ${{ steps.version.outputs.version }}"
-            echo "File content:"
-            cat CHANGELOG.md
-          else
-            echo "Found changelog entry:"
-            echo "$CHANGELOG"
-          fi
-          
-          {
-            echo "changelog<<EOF"
-            echo "$CHANGELOG"
-            echo "EOF"
-          } >> $GITHUB_OUTPUT
-      
-      - name: Set up Python
-        uses: actions/setup-python@v4
-        with:
-          python-version: '3.x'
-      
-      - name: Install dependencies
-        run: |
-          python -m pip install --upgrade pip
-          pip install platformio esptool
-      
-      - name: Build
-        run: |
-          pio run -t buildfs
-          pio run
-          
-      - name: Create full firmware
-        run: |
-          esptool.py --chip esp32 merge_bin \
-            --flash_mode dio \
-            --flash_freq 40m \
-            --flash_size 4MB \
-            -o .pio/build/esp32dev/filaman_full.bin \
-            0x1000 .pio/build/esp32dev/bootloader.bin \
-            0x8000 .pio/build/esp32dev/partitions.bin \
-            0x10000 .pio/build/esp32dev/firmware.bin \
-            0x290000 .pio/build/esp32dev/spiffs.bin
-          cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_ota.bin
-      
-      - name: Create Gitea Release
-        if: github.server_url != 'https://github.com'
-        env:
-          GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }}
-          GITEA_API_URL: ${{ secrets.GITEA_API_URL }}
-          GITEA_REPOSITORY: ${{ secrets.GITEA_REPOSITORY }}
-        run: |
-          echo "Creating Gitea release for version ${{ steps.version.outputs.version }}"
-          curl -v -X POST "${GITEA_API_URL}/repos/${GITEA_REPOSITORY}/releases" \
-            -H "Authorization: token ${GITEA_TOKEN}" \
-            -H "Content-Type: application/json" \
-            -d "{
-              \"tag_name\": \"${GITHUB_REF#refs/tags/}\",
-              \"name\": \"Release ${{ steps.version.outputs.version }}\",
-              \"body\": \"${{ steps.changelog.outputs.changelog }}\",
-              \"draft\": false,
-              \"prerelease\": false
-            }"
-            
-      - name: Create GitHub Release
-        if: github.server_url == 'https://github.com'
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        run: |
-          gh release create "${{ github.ref_name }}" \
-            --title "Release ${{ steps.version.outputs.version }}" \
-            --notes "${{ steps.changelog.outputs.changelog }}" \
-            ".pio/build/esp32dev/filaman_full.bin#filaman_full.bin" \
-            ".pio/build/esp32dev/filaman_ota.bin#filaman_ota.bin"
+
+  github-release:
+    needs: [route, verify-provider]
+    if: needs.route.outputs.provider == 'github'
+    uses: ./.github/workflows/providers/github-release.yml
+
+  gitea-release:
+    needs: [route, verify-provider]
+    if: needs.route.outputs.provider == 'gitea'
+    uses: ./.github/workflows/providers/gitea-release.yml
+    with:
+      gitea_ref_name: ${{ needs.route.outputs.gitea_ref_name }}
+      gitea_server_url: ${{ needs.route.outputs.gitea_server_url }}
+      gitea_repository: ${{ needs.route.outputs.gitea_repository }}
+    secrets:
+      GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }}

CHANGELOG.md

@@ -1,5 +1,135 @@
 # Changelog
 
+## [1.2.44] - 2025-02-19
+### Added
+- update Gitea release workflow to include additional outputs and increment version to 1.2.44
+
+
+## [1.2.43] - 2025-02-19
+### Added
+- update Gitea release workflow by removing unnecessary outputs and increment version to 1.2.43
+
+
+## [1.2.42] - 2025-02-19
+### Added
+- update Gitea release workflow to include additional outputs and increment version to 1.2.42
+
+
+## [1.2.41] - 2025-02-19
+### Added
+- update Gitea release workflow debug output and increment version to 1.2.41
+
+
+## [1.2.40] - 2025-02-19
+### Added
+- add inputs for Gitea release workflow and increment version to 1.2.40
+
+
+## [1.2.39] - 2025-02-19
+### Added
+- update Gitea release workflow to use Python virtual environment and increment version to 1.2.39
+
+
+## [1.2.38] - 2025-02-19
+### Added
+- update Gitea release workflow and increment version to 1.2.38
+
+
+## [1.2.37] - 2025-02-19
+### Added
+- update Gitea release workflow and increment version to 1.2.37
+
+
+## [1.2.36] - 2025-02-19
+### Added
+- update Gitea release workflow and increment version to 1.2.36
+
+
+## [1.2.35] - 2025-02-19
+### Added
+- update Gitea release workflow and version to 1.2.35
+
+
+## [1.2.34] - 2025-02-19
+### Added
+- update version to 1.2.34 and enhance Gitea and GitHub release workflows
+
+
+## [1.2.33] - 2025-02-19
+### Added
+- update version to 1.2.33 and refactor release workflows for Gitea and GitHub
+
+
+## [1.2.32] - 2025-02-19
+### Added
+- update version to 1.2.32 and adjust workflow dependencies for GitHub and Gitea releases
+
+
+## [1.2.31] - 2025-02-19
+### Added
+- update version to 1.2.31
+
+
+## [1.2.30] - 2025-02-19
+### Added
+- update version to 1.2.30 and enhance release workflows for Gitea and GitHub with improved artifact handling and changelog integration
+
+
+## [1.2.29] - 2025-02-19
+### Added
+- update version to 1.2.29 and enhance Gitea release workflow with improved error handling and debugging
+
+
+## [1.2.28] - 2025-02-19
+### Added
+- add build and release workflows for Gitea and GitHub, increment version to 1.2.28
+
+
+## [1.2.27] - 2025-02-19
+### Added
+- enhance CI workflows with provider detection and update version to 1.2.27
+
+
+## [1.2.26] - 2025-02-19
+### Added
+- update release workflows for Gitea and GitHub, increment version to 1.2.26
+
+
+## [1.2.25] - 2025-02-19
+### Added
+- update GitHub release workflows and increment version to 1.2.25
+
+
+## [1.2.24] - 2025-02-19
+### Added
+- update GitHub release workflow and increment version to 1.2.24
+
+
+## [1.2.23] - 2025-02-19
+### Added
+- update Gitea release workflow and increment version to 1.2.23
+
+
+## [1.2.22] - 2025-02-19
+### Added
+- update Gitea runner configuration and increment version to 1.2.22
+
+
+## [1.2.21] - 2025-02-19
+### Added
+- update Gitea release condition and increment version to 1.2.21
+
+
+## [1.2.20] - 2025-02-19
+### Added
+- update release workflows for GitHub and Gitea, increment version to 1.2.20
+
+
+## [1.2.19] - 2025-02-19
+### Added
+- add Gitea and GitHub release workflows for version 1.2.19
+
+
 ## [1.2.18] - 2025-02-19
 ### Added
 - remove Gitea and GitHub release workflows and increment version to 1.2.18

html/header.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.4</span></h1>
+                <h1>FilaMan<span class="version">v1.2.29</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/index.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.4</span></h1>
+                <h1>FilaMan<span class="version">v1.2.29</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/rfid.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.4</span></h1>
+                <h1>FilaMan<span class="version">v1.2.29</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/spoolman.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.4</span></h1>
+                <h1>FilaMan<span class="version">v1.2.29</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/upgrade.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.4</span></h1>
+                <h1>FilaMan<span class="version">v1.2.29</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/waage.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.4</span></h1>
+                <h1>FilaMan<span class="version">v1.2.29</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/wifi.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.4</span></h1>
+                <h1>FilaMan<span class="version">v1.2.29</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

platformio.ini

@@ -9,7 +9,7 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [common]
-version = "1.2.18"
+version = "1.2.44"
 
 [env:esp32dev]
 platform = espressif32