docs: update changelog for version 1.3.58

.github/workflows/gitea-release.yml

@@ -0,0 +1,165 @@
+name: Gitea Release
+
+on:
+  workflow_call:
+    secrets:
+      GITEA_TOKEN:
+        description: 'Token für Gitea API-Zugriff'
+        required: true
+
+jobs:
+  create-release:
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/checkout@v4
+    
+    - name: Set up Python
+      uses: actions/setup-python@v4
+      with:
+        python-version: '3.x'
+    
+    - name: Install PlatformIO
+      run: |
+        python -m pip install --upgrade pip
+        pip install --upgrade platformio esptool
+    
+    - name: Install xxd
+      run: |
+        sudo apt-get update
+        sudo apt-get install xxd
+    
+    - name: Build Firmware
+      run: |
+        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
+        
+        # Build firmware and SPIFFS
+        echo "Building firmware and SPIFFS..."
+        pio run -e esp32dev
+        pio run -t buildfs
+        
+        # Copy firmware binary
+        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/upgrade_filaman_firmware_v${VERSION}.bin
+        
+        # Create SPIFFS binary - direct copy without header
+        cp .pio/build/esp32dev/spiffs.bin .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
+        
+        # Create full binary
+        (cd .pio/build/esp32dev && 
+        esptool.py --chip esp32 merge_bin \
+          --fill-flash-size 4MB \
+          --flash_mode dio \
+          --flash_freq 40m \
+          --flash_size 4MB \
+          -o filaman_full_${VERSION}.bin \
+          0x1000 bootloader.bin \
+          0x8000 partitions.bin \
+          0x10000 firmware.bin \
+          0x3D0000 spiffs.bin)
+        
+        # Verify file sizes
+        echo "File sizes:"
+        (cd .pio/build/esp32dev && ls -lh *.bin)
+    
+    - name: Get version from platformio.ini
+      id: get_version
+      run: |
+        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
+        echo "VERSION=$VERSION" >> $GITHUB_OUTPUT
+      
+    - name: Read CHANGELOG.md
+      id: changelog
+      run: |
+        VERSION=${{ steps.get_version.outputs.VERSION }}
+        CHANGELOG=$(awk "/## \\[$VERSION\\]/{p=1;print;next} /## \\[/{p=0} p" CHANGELOG.md)
+        echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
+        echo "$CHANGELOG" >> $GITHUB_OUTPUT
+        echo "EOF" >> $GITHUB_OUTPUT
+
+    - name: Determine Gitea URL
+      id: gitea_url
+      run: |
+        echo "Debug Environment:"
+        echo "GITHUB_SERVER_URL=${GITHUB_SERVER_URL:-not set}"
+        echo "GITEA_SERVER_URL=${GITEA_SERVER_URL:-not set}"
+        echo "GITHUB_REPOSITORY=${GITHUB_REPOSITORY:-not set}"
+        echo "GITEA_REPOSITORY=${GITEA_REPOSITORY:-not set}"
+        echo "RUNNER_NAME=${RUNNER_NAME:-not set}"
+        
+        # Set API URL based on environment
+        if [ -n "${GITEA_ACTIONS}" ] || [ -n "${GITEA_REPOSITORY}" ] || [[ "${RUNNER_NAME}" == *"gitea"* ]]; then
+          GITEA_API_URL="${GITHUB_SERVER_URL}"
+          GITEA_REPO=$(echo "${GITHUB_REPOSITORY}" | cut -d'/' -f2)
+          GITEA_OWNER=$(echo "${GITHUB_REPOSITORY}" | cut -d'/' -f1)
+        else
+          echo "Error: This workflow is only for Gitea"
+          exit 1
+        fi
+        
+        echo "GITEA_API_URL=${GITEA_API_URL}" >> $GITHUB_OUTPUT
+        echo "GITEA_REPO=${GITEA_REPO}" >> $GITHUB_OUTPUT
+        echo "GITEA_OWNER=${GITEA_OWNER}" >> $GITHUB_OUTPUT
+
+    - name: Create Gitea Release
+      env:
+        GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }}
+        GITEA_API_URL: ${{ steps.gitea_url.outputs.GITEA_API_URL }}
+        GITEA_REPO: ${{ steps.gitea_url.outputs.GITEA_REPO }}
+        GITEA_OWNER: ${{ steps.gitea_url.outputs.GITEA_OWNER }}
+      run: |
+        # Debug Token (nur Länge ausgeben für Sicherheit)
+        echo "Debug: Token length: ${#GITEA_TOKEN}"
+        if [ -z "$GITEA_TOKEN" ]; then
+          echo "Error: GITEA_TOKEN is empty"
+          exit 1
+        fi
+
+        VERSION=${{ steps.get_version.outputs.VERSION }}
+        cd .pio/build/esp32dev
+        
+        # Debug-Ausgaben
+        echo "Debug: API URL: ${GITEA_API_URL}"
+        echo "Debug: Repository: ${GITEA_OWNER}/${GITEA_REPO}"
+        
+        # Erstelle zuerst den Release ohne Dateien
+        echo "Debug: Creating release..."
+        RELEASE_DATA="{\"tag_name\":\"v${VERSION}\",\"name\":\"v${VERSION}\",\"body\":\"${{ steps.changelog.outputs.CHANGES }}\"}"
+        
+        RELEASE_RESPONSE=$(curl -s -w "\n%{http_code}" \
+          -X POST \
+          -H "Authorization: token ${GITEA_TOKEN}" \
+          -H "Content-Type: application/json" \
+          -d "${RELEASE_DATA}" \
+          "${GITEA_API_URL}/api/v1/repos/${GITEA_OWNER}/${GITEA_REPO}/releases")
+        
+        RELEASE_STATUS=$(echo "$RELEASE_RESPONSE" | tail -n1)
+        RELEASE_BODY=$(echo "$RELEASE_RESPONSE" | head -n -1)
+        
+        if [ "$RELEASE_STATUS" != "201" ]; then
+          echo "Error: Failed to create release"
+          echo "Response: $RELEASE_BODY"
+          exit 1
+        fi
+        
+        # Extrahiere die Release-ID aus der Antwort
+        RELEASE_ID=$(echo "$RELEASE_BODY" | grep -o '"id":[0-9]*' | cut -d':' -f2)
+        
+        # Lade die Dateien einzeln hoch
+        for file in upgrade_filaman_firmware_v${VERSION}.bin upgrade_filaman_website_v${VERSION}.bin filaman_full_${VERSION}.bin; do
+          if [ -f "$file" ]; then
+            echo "Debug: Uploading $file..."
+            UPLOAD_RESPONSE=$(curl -s -w "\n%{http_code}" \
+              -X POST \
+              -H "Authorization: token ${GITEA_TOKEN}" \
+              -H "Content-Type: application/octet-stream" \
+              --data-binary @"$file" \
+              "${GITEA_API_URL}/api/v1/repos/${GITEA_OWNER}/${GITEA_REPO}/releases/${RELEASE_ID}/assets?name=${file}")
+            
+            UPLOAD_STATUS=$(echo "$UPLOAD_RESPONSE" | tail -n1)
+            if [ "$UPLOAD_STATUS" != "201" ]; then
+              echo "Warning: Failed to upload $file"
+              echo "Response: $(echo "$UPLOAD_RESPONSE" | head -n -1)"
+            else
+              echo "Successfully uploaded $file"
+            fi
+          fi
+        done

.github/workflows/github-release.yml

@@ -2,6 +2,13 @@ name: GitHub Release
 
 on:
   workflow_call:
+    secrets:
+      RELEASE_TOKEN:
+        description: 'GitHub token for release creation'
+        required: true
+
+permissions:
+  contents: write
 
 jobs:
   create-release:
@@ -10,6 +17,8 @@ jobs:
       contents: write
     steps:
     - uses: actions/checkout@v4
+      with:
+        fetch-depth: 0
     
     - name: Set up Python
       uses: actions/setup-python@v4
@@ -26,28 +35,6 @@ jobs:
         sudo apt-get update
         sudo apt-get install xxd
     
-    - name: Check for Data changes
-      id: check_data
-      run: |
-        git fetch --unshallow || true
-        CHANGED_FILES=$(git diff --name-only HEAD^..HEAD)
-        if echo "$CHANGED_FILES" | grep -q "^data/"; then
-          echo "DATA_CHANGED=true" >> $GITHUB_OUTPUT
-        else
-          echo "DATA_CHANGED=false" >> $GITHUB_OUTPUT
-        fi
-
-    - name: Check for SPIFFS changes
-      id: check_spiffs
-      run: |
-        git fetch --unshallow || true
-        CHANGED_FILES=$(git diff --name-only HEAD^..HEAD)
-        if echo "$CHANGED_FILES" | grep -q "^data/\|^html/"; then
-          echo "SPIFFS_CHANGED=true" >> $GITHUB_OUTPUT
-        else
-          echo "SPIFFS_CHANGED=false" >> $GITHUB_OUTPUT
-        fi
-    
     - name: Build Firmware
       run: |
         VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
@@ -58,10 +45,10 @@ jobs:
         pio run -t buildfs
         
         # Copy firmware binary
-        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_${VERSION}.bin
+        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/upgrade_filaman_firmware_v${VERSION}.bin
         
-        # Always create SPIFFS binary
+        # Create SPIFFS binary - direct copy without header
-        cp .pio/build/esp32dev/spiffs.bin .pio.build/esp32dev/webpage_${VERSION}.bin
+        cp .pio/build/esp32dev/spiffs.bin .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
         
         # Create full binary (always)
         (cd .pio/build/esp32dev && 
@@ -74,7 +61,7 @@ jobs:
           0x1000 bootloader.bin \
           0x8000 partitions.bin \
           0x10000 firmware.bin \
-          0x390000 spiffs.bin)
+          0x3D0000 spiffs.bin)
         
         # Verify file sizes
         echo "File sizes:"
@@ -97,22 +84,22 @@ jobs:
 
     - name: Create GitHub Release
       env:
-        GH_TOKEN: ${{ github.token }}
+        GH_TOKEN: ${{ secrets.RELEASE_TOKEN }}
       run: |
         VERSION=${{ steps.get_version.outputs.VERSION }}
+        cd .pio/build/esp32dev
         
         # Create release with available files
-        cd .pio/build/esp32dev
         FILES_TO_UPLOAD=""
         
         # Always add firmware
-        if [ -f "filaman_${VERSION}.bin" ]; then
+        if [ -f "upgrade_filaman_firmware_v${VERSION}.bin" ]; then
-          FILES_TO_UPLOAD="$FILES_TO_UPLOAD filaman_${VERSION}.bin"
+          FILES_TO_UPLOAD="$FILES_TO_UPLOAD upgrade_filaman_firmware_v${VERSION}.bin"
         fi
         
         # Add SPIFFS and full binary only if they exist
-        if [ -f "webpage_${VERSION}.bin" ]; then
+        if [ -f "upgrade_filaman_website_v${VERSION}.bin" ]; then
-          FILES_TO_UPLOAD="$FILES_TO_UPLOAD webpage_${VERSION}.bin"
+          FILES_TO_UPLOAD="$FILES_TO_UPLOAD upgrade_filaman_website_v${VERSION}.bin"
         fi
         
         if [ -f "filaman_full_${VERSION}.bin" ]; then

.github/workflows/providers/gitea-release.yml

@@ -1,182 +0,0 @@
-name: Gitea Release
-
-on:
-  workflow_call:
-    inputs:
-      gitea_server_url:
-        required: true
-        type: string
-      gitea_repository:
-        required: true
-        type: string
-    secrets:
-      GITEA_TOKEN:
-        required: true
-
-jobs:
-  create-release:
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v4
-    
-    - name: Set up Python
-      uses: actions/setup-python@v4
-      with:
-        python-version: '3.x'
-    
-    - name: Install PlatformIO
-      run: |
-        python -m pip install --upgrade pip
-        pip install --upgrade platformio esptool
-    
-    - name: Install xxd
-      run: |
-        sudo apt-get update
-        sudo apt-get install xxd
-    
-    - name: Check for SPIFFS changes
-      id: check_spiffs
-      run: |
-        git fetch --unshallow || true
-        CHANGED_FILES=$(git diff --name-only HEAD^..HEAD)
-        if echo "$CHANGED_FILES" | grep -q "^data/\|^html/"; then
-          echo "SPIFFS_CHANGED=true" >> $GITHUB_OUTPUT
-        else
-          echo "SPIFFS_CHANGED=false" >> $GITHUB_OUTPUT
-        fi
-    
-    - name: Check for Data changes
-      id: check_data
-      run: |
-        git fetch --unshallow || true
-        CHANGED_FILES=$(git diff --name-only HEAD^..HEAD)
-        if echo "$CHANGED_FILES" | grep -q "^data/"; then
-          echo "DATA_CHANGED=true" >> $GITHUB_OUTPUT
-        else
-          echo "DATA_CHANGED=false" >> $GITHUB_OUTPUT
-        fi
-    
-    - name: Get version from platformio.ini
-      id: get_version
-      run: |
-        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
-        echo "VERSION=$VERSION" >> $GITHUB_OUTPUT
-
-    - name: Build Firmware
-      run: |
-        VERSION=${{ steps.get_version.outputs.VERSION }}
-        
-        # Always build firmware and SPIFFS
-        echo "Building firmware and SPIFFS..."
-        pio run -e esp32dev
-        pio run -t buildfs
-        
-        # Copy firmware binary
-        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_${VERSION}.bin
-        
-        # Always create SPIFFS binary
-        cp .pio/build/esp32dev/spiffs.bin .pio/build/esp32dev/webpage_${VERSION}.bin
-        
-        # Create full binary (always)
-        (cd .pio/build/esp32dev && 
-        esptool.py --chip esp32 merge_bin \
-          --fill-flash-size 4MB \
-          --flash_mode dio \
-          --flash_freq 40m \
-          --flash_size 4MB \
-          -o filaman_full_${VERSION}.bin \
-          0x1000 bootloader.bin \
-          0x8000 partitions.bin \
-          0x10000 firmware.bin \
-          0x390000 spiffs.bin)
-        
-        # Verify file sizes
-        echo "File sizes:"
-        (cd .pio/build/esp32dev && ls -lh *.bin)
-        
-    - name: Prepare binaries
-      run: |
-        VERSION=${{ steps.get_version.outputs.VERSION }}
-        
-        # Create full binary only if SPIFFS changed
-        if [[ "${{ steps.check_spiffs.outputs.SPIFFS_CHANGED }}" == "true" ]]; then
-          echo "Creating full binary..."
-          cd .pio/build/esp32dev && \
-          esptool.py --chip esp32 merge_bin \
-            --fill-flash-size 4MB \
-            --flash_mode dio \
-            --flash_freq 40m \
-            --flash_size 4MB \
-            -o filaman_full_${VERSION}.bin \
-            0x0000 bootloader.bin \
-            0x8000 partitions.bin \
-            0x10000 firmware.bin \
-            0x390000 spiffs.bin
-        fi
-        
-        # Verify file sizes
-        echo "File sizes:"
-        cd .pio/build/esp32dev && ls -lh *.bin
-
-    - name: Read CHANGELOG.md
-      id: changelog
-      run: |
-        VERSION=${{ steps.get_version.outputs.VERSION }}
-        CHANGELOG=$(awk "/## \\[$VERSION\\]/{p=1;print;next} /## \\[/{p=0} p" CHANGELOG.md)
-        echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
-        echo "$CHANGELOG" >> $GITHUB_OUTPUT
-        echo "EOF" >> $GITHUB_OUTPUT
-        
-    - name: Create Release
-      env:
-        TOKEN: ${{ secrets.GITEA_TOKEN }}
-      run: |
-        API_URL="${{ inputs.gitea_server_url }}/api/v1"
-        REPO="${{ inputs.gitea_repository }}"
-        VERSION=${{ steps.get_version.outputs.VERSION }}
-        
-        # Create release
-        RESPONSE=$(curl -k -s \
-          -X POST \
-          -H "Authorization: token ${TOKEN}" \
-          -H "Content-Type: application/json" \
-          -d "{
-            \"tag_name\":\"v${VERSION}\",
-            \"name\":\"Release ${VERSION}\",
-            \"body\":\"${{ steps.changelog.outputs.CHANGES }}\"
-          }" \
-          "${API_URL}/repos/${REPO}/releases")
-        
-        RELEASE_ID=$(echo "$RESPONSE" | grep -o '"id":[0-9]*' | cut -d':' -f2 | head -n1)
-        
-        if [ -n "$RELEASE_ID" ]; then
-          echo "Release created with ID: $RELEASE_ID"
-          
-          # Always upload firmware and full binary
-          for file in filaman_${VERSION}.bin filaman_full_${VERSION}.bin; do
-            if [ -f ".pio/build/esp32dev/$file" ]; then
-              echo "Uploading $file..."
-              curl -k -s \
-                -X POST \
-                -H "Authorization: token ${TOKEN}" \
-                -H "Content-Type: application/octet-stream" \
-                --data-binary "@.pio/build/esp32dev/$file" \
-                "${API_URL}/repos/${REPO}/releases/${RELEASE_ID}/assets?name=$file"
-            fi
-          done
-          
-          # Upload SPIFFS binary only if it exists (data changes)
-          if [ -f ".pio/build/esp32dev/webpage_${VERSION}.bin" ]; then
-            echo "Uploading webpage binary..."
-            curl -k -s \
-              -X POST \
-              -H "Authorization: token ${TOKEN}" \
-              -H "Content-Type: application/octet-stream" \
-              --data-binary "@.pio/build/esp32dev/webpage_${VERSION}.bin" \
-              "${API_URL}/repos/${REPO}/releases/${RELEASE_ID}/assets?name=webpage_${VERSION}.bin"
-          fi
-        else
-          echo "Failed to create release. Response:"
-          echo "$RESPONSE"
-          exit 1
-        fi

.github/workflows/release.yml

@@ -5,66 +5,37 @@ on:
     tags:
       - 'v*'
 
+permissions:
+  contents: write
+
 jobs:
-  route:
+  detect-provider:
     runs-on: ubuntu-latest
     outputs:
       provider: ${{ steps.provider.outputs.provider }}
-      gitea_ref_name: ${{ steps.provider.outputs.gitea_ref_name }}
-      gitea_server_url: ${{ steps.provider.outputs.gitea_server_url }}
-      gitea_repository: ${{ steps.provider.outputs.gitea_repository }}
     steps:
-      - name: Checkout Repository
-        uses: actions/checkout@v3
-
-      - name: Debug Environment
-        run: |
-          echo "CI Environment Details:"
-          echo "GITHUB_ACTIONS=${GITHUB_ACTIONS:-not set}"
-          echo "GITEA_ACTIONS=${GITEA_ACTIONS:-not set}"
-          echo "GITEA_REPOSITORY=${GITEA_REPOSITORY:-not set}"
-          echo "GITEA_SERVER_URL=${GITEA_SERVER_URL:-not set}"
-          echo "RUNNER_NAME=${RUNNER_NAME:-not set}"
-
       - name: Determine CI Provider
         id: provider
         shell: bash
         run: |
           if [ -n "${GITEA_ACTIONS}" ] || [ -n "${GITEA_REPOSITORY}" ] || [[ "${RUNNER_NAME}" == *"gitea"* ]]; then
             echo "provider=gitea" >> "$GITHUB_OUTPUT"
-            echo "gitea_ref_name=${GITHUB_REF_NAME}" >> "$GITHUB_OUTPUT"
-            echo "gitea_server_url=${GITHUB_SERVER_URL}" >> "$GITHUB_OUTPUT"
-            echo "gitea_repository=${GITHUB_REPOSITORY}" >> "$GITHUB_OUTPUT"
-          elif [ "${GITHUB_ACTIONS}" = "true" ]; then
-            echo "provider=github" >> "$GITHUB_OUTPUT"
           else
-            echo "provider=unknown" >> "$GITHUB_OUTPUT"
+            echo "provider=github" >> "$GITHUB_OUTPUT"
-          fi
-
-  verify-provider:
-    needs: route
-    runs-on: ubuntu-latest
-    steps:
-      - name: Echo detected provider
-        run: |
-          echo "Detected CI Provider: ${{ needs.route.outputs.provider }}"
-          if [ "${{ needs.route.outputs.provider }}" = "unknown" ]; then
-            echo "::error::Failed to detect CI provider!"
-            exit 1
           fi
 
   github-release:
-    needs: [route, verify-provider]
+    needs: detect-provider
-    if: needs.route.outputs.provider == 'github'
+    permissions:
-    uses: ./.github/workflows/providers/github-release.yml
+      contents: write
+    if: needs.detect-provider.outputs.provider == 'github'
+    uses: ./.github/workflows/github-release.yml
+    secrets:
+      RELEASE_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
   gitea-release:
-    needs: [route, verify-provider]
+    needs: detect-provider
-    if: needs.route.outputs.provider == 'gitea'
+    if: needs.detect-provider.outputs.provider == 'gitea'
-    uses: ./.github/workflows/providers/gitea-release.yml
+    uses: ./.github/workflows/gitea-release.yml
-    with:
-      gitea_ref_name: ${{ needs.route.outputs.gitea_ref_name }}
-      gitea_server_url: ${{ needs.route.outputs.gitea_server_url }}
-      gitea_repository: ${{ needs.route.outputs.gitea_repository }}
     secrets:
       GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }}

CHANGELOG.md

@@ -1,5 +1,411 @@
 # Changelog
 
+## [1.3.58] - 2025-02-22
+### Added
+- implement backup and restore functionality for Bambu credentials and Spoolman URL
+
+### Changed
+- update webpages for version v1.3.58
+- update upgrade page message and improve progress display logic
+
+
+## [1.3.57] - 2025-02-22
+### Changed
+- update webpages for version v1.3.57
+- update header title to 'Filament Management Tool' in multiple HTML files
+
+
+## [1.3.56] - 2025-02-22
+### Changed
+- update webpages for version v1.3.56
+- update header title and improve SPIFFS update error handling
+- clarify comments in Gitea and GitHub release workflows
+
+
+## [1.3.55] - 2025-02-22
+### Changed
+- update webpages for version v1.3.55
+- update component descriptions in README files
+
+
+## [1.3.54] - 2025-02-22
+### Changed
+- update webpages for version v1.3.54
+- workflow: update SPIFFS binary creation to exclude header
+
+
+## [1.3.53] - 2025-02-22
+### Changed
+- version: update to version 1.3.53
+- update changelog for version 1.3.51
+- update changelog for version 1.3.51
+- workflow: update SPIFFS binary magic byte and revert version to 1.3.51
+
+
+## [1.3.52] - 2025-02-22
+### Changed
+- update webpages for version v1.3.52
+- workflow: update SPIFFS binary creation to use correct chip revision (0xEB for Rev 3)
+
+
+## [1.3.51] - 2025-02-22
+### Changed
+- update changelog for version 1.3.51
+- workflow: update SPIFFS binary magic byte and revert version to 1.3.51
+
+## [1.3.50] - 2025-02-22
+### Changed
+- update webpages for version v1.3.50
+
+
+## [1.3.49] - 2025-02-22
+### Changed
+- update webpages for version v1.3.49
+- workflow: update SPIFFS binary header to use correct chip revision
+
+
+## [1.3.48] - 2025-02-22
+### Changed
+- update webpages for version v1.3.48
+- workflow: update SPIFFS binary header for firmware release
+
+
+## [1.3.47] - 2025-02-22
+### Changed
+- update webpages for version v1.3.47
+- workflow: optimize firmware and SPIFFS update process, improve progress handling and logging
+
+
+## [1.3.46] - 2025-02-22
+### Changed
+- update webpages for version v1.3.46
+
+
+## [1.3.45] - 2025-02-22
+### Changed
+- update webpages for version v1.3.45
+- workflow: update SPIFFS binary creation to include minimal header and adjust update validation logic
+
+
+## [1.3.44] - 2025-02-22
+### Changed
+- update webpages for version v1.3.44
+- update header title to 'Hollo Lollo Trollo'
+- update header title to 'Filament Management Tool' and improve update response messages
+
+
+## [1.3.43] - 2025-02-22
+### Changed
+- update webpages for version v1.3.43
+- update header title to 'Hollo Lollo Trollo'
+
+
+## [1.3.42] - 2025-02-22
+### Changed
+- update webpages for version v1.3.42
+
+### Fixed
+- correct path for SPIFFS binary creation in Gitea release workflow
+
+
+## [1.3.41] - 2025-02-22
+### Changed
+- update webpages for version v1.3.41
+
+### Fixed
+- remove redundant buffer size setting in NFC initialization
+- update SPIFFS binary creation and enhance NFC buffer size
+
+
+## [1.3.40] - 2025-02-22
+### Changed
+- update webpages for version v1.3.40
+
+### Fixed
+- update SPIFFS binary header and enhance WebSocket error handling
+
+
+## [1.3.39] - 2025-02-22
+### Changed
+- update webpages for version v1.3.39
+- workflow: update SPIFFS binary creation to set chip version to max supported
+
+
+## [1.3.38] - 2025-02-22
+### Changed
+- update webpages for version v1.3.38
+- workflow: update SPIFFS binary creation with minimal ESP32 image header
+
+
+## [1.3.37] - 2025-02-22
+### Changed
+- update webpages for version v1.3.37
+- workflow: update ESP32-WROOM image header for SPIFFS binary creation
+
+
+## [1.3.36] - 2025-02-22
+### Changed
+- update webpages for version v1.3.36
+- partition: update SPIFFS binary header and offsets in workflow files
+
+
+## [1.3.35] - 2025-02-22
+### Changed
+- update webpages for version v1.3.35
+- partition: update SPIFFS binary header and offsets in workflow files
+
+
+## [1.3.34] - 2025-02-22
+### Changed
+- update webpages for version v1.3.34
+- partition: update SPIFFS binary creation and offsets in workflow files
+
+
+## [1.3.33] - 2025-02-22
+### Changed
+- update webpages for version v1.3.33
+- partition: update spiffs offset and app sizes in partition files
+- partition: update spiffs offset in partition files
+- partition: update app sizes and offsets in partitions.csv
+
+
+## [1.3.32] - 2025-02-22
+### Changed
+- update webpages for version v1.3.32
+- workflow: update magic byte for SPIFFS binary creation
+
+
+## [1.3.31] - 2025-02-22
+### Changed
+- update webpages for version v1.3.31
+- workflow: remove unnecessary data and SPIFFS change checks from release workflows
+
+
+## [1.3.30] - 2025-02-22
+### Changed
+- update webpages for version v1.3.30
+- workflow: update Gitea and GitHub release workflows to create SPIFFS binary with magic byte
+
+
+## [1.3.29] - 2025-02-21
+### Changed
+- update webpages for version v1.3.29
+- workflow: update Gitea release workflow to create release before file uploads
+
+
+## [1.3.28] - 2025-02-21
+### Changed
+- update webpages for version v1.3.28
+- workflow: update Gitea release workflow to use file uploads with curl
+
+
+## [1.3.27] - 2025-02-21
+### Added
+- workflow: add GITEA_TOKEN secret for Gitea API access in release workflows
+
+### Changed
+- update webpages for version v1.3.27
+
+
+## [1.3.26] - 2025-02-21
+### Changed
+- update webpages for version v1.3.26
+
+### Fixed
+- workflow: improve Gitea release workflow with enhanced error handling and debug outputs
+
+
+## [1.3.25] - 2025-02-21
+### Changed
+- update webpages for version v1.3.25
+- workflow: update Gitea release workflow to include RUNNER_NAME and improve error handling
+
+
+## [1.3.24] - 2025-02-21
+### Changed
+- update webpages for version v1.3.24
+- workflow: rename update files to upgrade in GitHub release workflow
+- workflow: aktualisiere bestehende Einträge im Changelog für vorhandene Versionen
+
+### Fixed
+- workflow: improve Gitea release process with dynamic URL determination and debug outputs
+
+
+## [1.3.23] - 2025-02-21
+### Changed
+- update webpages for version v1.3.23
+
+### Fixed
+- workflow: enhance Gitea release process with debug outputs and API connection checks
+
+
+## [1.3.22] - 2025-02-21
+### Added
+- workflow: improve Gitea release process with additional environment variables and error handling
+
+### Changed
+- update webpages for version v1.3.22
+
+
+## [1.3.21] - 2025-02-21
+### Changed
+- update webpages for version v1.3.21
+- workflow: enhance Gitea release process with API integration and token management
+
+
+## [1.3.20] - 2025-02-21
+### Changed
+- update webpages for version v1.3.20
+- workflow: enable git tagging and pushing for Gitea releases
+
+
+## [1.3.19] - 2025-02-21
+### Changed
+- update webpages for version v1.3.19
+- workflow: enable git push for version tagging in Gitea release
+
+
+## [1.3.18] - 2025-02-21
+### Changed
+- ACHTUNG: Installiere einmal das filaman_full.bin danach kannst du über die upgrade Files aktualisieren und deine Settings bleiben auch erhalten.
+- ATTENTION: Install the filaman_full.bin once, then you can update via the upgrade files and your settings will also be retained.
+
+
+
+## [1.3.18] - 2025-02-21
+### Added
+- add note about filaman_full.bin installation in changelog
+
+### Changed
+- update webpages for version v1.3.18
+- update changelog for version 1.3.18 and enhance update script for existing entries
+
+## [1.3.17] - 2025-02-21
+### Changed
+- update webpages for version v1.3.17
+- ci: comment out git tag and push commands in gitea-release workflow
+
+
+## [1.3.16] - 2025-02-21
+### Changed
+- update webpages for version v1.3.16
+- ci: update filenames for firmware and website binaries in release workflows
+
+
+## [1.3.15] - 2025-02-21
+### Changed
+- update webpages for version v1.3.15
+
+### Fixed
+- ci: fix missing 'fi' in GitHub release workflow script
+
+
+## [1.3.14] - 2025-02-21
+### Changed
+- update webpages for version v1.3.14
+- ci: update GitHub release workflow to improve file upload handling
+
+
+## [1.3.13] - 2025-02-21
+### Changed
+- update webpages for version v1.3.13
+- ci: update GitHub release workflow to use RELEASE_TOKEN for improved security
+
+
+## [1.3.12] - 2025-02-21
+### Changed
+- update webpages for version v1.3.12
+- ci: enhance GitHub release workflow with token handling and file upload improvements
+
+
+## [1.3.11] - 2025-02-21
+### Changed
+- update webpages for version v1.3.11
+- ci: refactor Gitea release workflow by simplifying input handling and removing unnecessary checks
+
+
+## [1.3.10] - 2025-02-21
+### Changed
+- update webpages for version v1.3.10
+- ci: simplify GitHub release workflow by removing provider verification step
+
+
+## [1.3.9] - 2025-02-21
+### Changed
+- update webpages for version v1.3.9
+- ci: comment out permissions for GitHub release workflow
+
+
+## [1.3.8] - 2025-02-21
+### Added
+- add Gitea and GitHub release workflows
+
+### Changed
+- update webpages for version v1.3.8
+
+
+## [1.3.7] - 2025-02-21
+### Added
+- add GitHub and Gitea release workflows
+
+### Changed
+- update webpages for version v1.3.7
+
+
+## [1.3.6] - 2025-02-21
+### Changed
+- update webpages for version v1.3.6
+
+### Fixed
+- update GitHub token reference and correct file path in release workflow
+
+
+## [1.3.5] - 2025-02-21
+### Added
+- enhance release workflow to support Gitea alongside GitHub
+
+### Changed
+- update webpages for version v1.3.5
+
+
+## [1.3.4] - 2025-02-21
+### Added
+- add Gitea and GitHub release workflows
+
+### Changed
+- update webpages for version v1.3.4
+- Merge branch 'old'
+
+
+## [1.3.3] - 2025-02-21
+### Changed
+- update webpages for version v1.3.3
+
+### Fixed
+- correct directory path in GitHub workflows for SPIFFS binary
+
+
+## [1.3.2] - 2025-02-21
+### Added
+- add missing conditional exit in release workflow
+
+### Changed
+- update webpages for version v1.3.2
+
+
+## [1.3.1] - 2025-02-21
+### Added
+- enhance GitHub and Gitea release workflows with Python setup and binary preparation
+
+### Changed
+- update webpages for version v1.3.1
+
+
+## [1.3.0] - 2025-02-21
+### Changed
+- bump version to 1.3.0 in platformio.ini
+
+
 ## [1.2.102] - 2025-02-21
 ### Changed
 - update webpages for version v1.2.102

README.de.md

@@ -53,14 +53,14 @@ Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaO
 ### Komponenten
 - **ESP32 Entwicklungsboard:** Jede ESP32-Variante.
 [Amazon Link](https://amzn.eu/d/aXThslf)
-- **HX711 Wägezellen-Verstärker:** Für Gewichtsmessung.
+- **HX711 5kg Wägezellen-Verstärker:** Für Gewichtsmessung.
-[Amazon Link](https://amzn.eu/d/1wZ4v0x)
+[Amazon Link](https://amzn.eu/d/06A0DLb)
-- **OLED Display:** 128x64 SSD1306.
+- **OLED 0.96 Zoll I2C weiß/gelb Display:** 128x64 SSD1306.
-[Amazon Link](https://amzn.eu/d/dozAYDU)
+[Amazon Link](https://amzn.eu/d/0AuBp2c)
-- **PN532 NFC Modul:** Für NFC-Tag-Operationen.
+- **PN532 NFC NXP RFID-Modul V3:** Für NFC-Tag-Operationen.
-[Amazon Link](https://amzn.eu/d/8205DDh)
+[Amazon Link](https://amzn.eu/d/jfIuQXb)
-- **NFC-Tag:** NTAG215
+- **NFC Tags Ntag215:** RFID Tag
-[Amazon Link](https://amzn.eu/d/fywy4c4)
+[Amazon Link](https://amzn.eu/d/9Z6mXc1)
 
 ### Pin-Konfiguration
 | Komponente        | ESP32 Pin |

README.md

@@ -56,14 +56,14 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
 ### Components
 - **ESP32 Development Board:** Any ESP32 variant.
 [Amazon Link](https://amzn.eu/d/aXThslf)
-- **HX711 Load Cell Amplifier:** For weight measurement.
+- **HX711 5kg Load Cell Amplifier:** For weight measurement.
-[Amazon Link](https://amzn.eu/d/1wZ4v0x)
+[Amazon Link](https://amzn.eu/d/06A0DLb)
-- **OLED Display:** 128x64 SSD1306.
+- **OLED 0.96 Zoll I2C white/yellow Display:** 128x64 SSD1306.
-[Amazon Link](https://amzn.eu/d/dozAYDU)
+[Amazon Link](https://amzn.eu/d/0AuBp2c)
-- **PN532 NFC Module:** For NFC tag operations.
+- **PN532 NFC NXP RFID-Modul V3:** For NFC tag operations.
-[Amazon Link](https://amzn.eu/d/8205DDh)
+[Amazon Link](https://amzn.eu/d/jfIuQXb)
-- **NFC-Tag:** NTAG215
+- **NFC Tags Ntag215:** RFID Tag
-[Amazon Link](https://amzn.eu/d/fywy4c4)
+[Amazon Link](https://amzn.eu/d/9Z6mXc1)
 
 
 ### Pin Configuration

html/upgrade.html

@@ -167,12 +167,12 @@
             }
 
             // Validate file name pattern
-            if (updateType === 'firmware' && !file.name.startsWith('filaman_')) {
+            if (updateType === 'firmware' && !file.name.startsWith('upgrade_filaman_firmware_')) {
-                alert('Please select a valid firmware file (filaman_*.bin)');
+                alert('Please select a valid firmware file (upgrade_filaman_firmware_*.bin)');
                 return;
             }
-            if (updateType === 'webpage' && !file.name.startsWith('webpage_')) {
+            if (updateType === 'webpage' && !file.name.startsWith('upgrade_filaman_website_')) {
-                alert('Please select a valid webpage file (webpage_*.bin)');
+                alert('Please select a valid webpage file (upgrade_filaman_website_*.bin)');
                 return;
             }
             
@@ -189,48 +189,34 @@
 
             const xhr = new XMLHttpRequest();
             xhr.open('POST', '/update', true);
-            xhr.upload.onprogress = (e) => {
-                if (e.lengthComputable) {
-                    const percentComplete = (e.loaded / e.total) * 100;
-                    progress.style.width = percentComplete + '%';
-                    progress.textContent = Math.round(percentComplete) + '%';
-                }
-            };
 
             xhr.onload = function() {
                 try {
                     let response = this.responseText;
                     try {
                         const jsonResponse = JSON.parse(response);
-                        response = jsonResponse.message;
                         
-                        if (jsonResponse.restart) {
+                        // Zeige finale Nachricht
-                            status.textContent = response + " Redirecting in 20 seconds...";
+                        status.textContent = jsonResponse.message || "Update complete";
-                            let countdown = 20;
+                        status.classList.add(jsonResponse.success ? 'success' : 'error');
-                            const timer = setInterval(() => {
+                        status.style.display = 'block';
-                                countdown--;
+                        
-                                if (countdown <= 0) {
+                        if (jsonResponse.success) {
-                                    clearInterval(timer);
+                            progress.style.width = '100%';
-                                    window.location.href = '/';
+                            progress.textContent = '100%';
-                                } else {
+                            
-                                    status.textContent = response + ` Redirecting in ${countdown} seconds...`;
+                            // Automatischer Neustart nach erfolgreicher Aktualisierung
-                                }
+                            status.textContent = "Update successful! Restarting device... The page will reload in 30 seconds.";
-                            }, 1000);
+                            setTimeout(() => {
+                                window.location.href = '/';
+                            }, 30000);
+                        } else {
+                            document.querySelectorAll('form input[type=submit]').forEach(btn => btn.disabled = false);
                         }
                     } catch (e) {
-                        if (!isNaN(response)) {
+                        console.error('JSON parse error:', e);
-                            const percent = parseInt(response);
+                        status.textContent = 'Update failed: Invalid response from server';
-                            progress.style.width = percent + '%';
+                        status.classList.add('error');
-                            progress.textContent = percent + '%';
-                            return;
-                        }
-                    }
-                    
-                    status.textContent = response;
-                    status.classList.add(xhr.status === 200 ? 'success' : 'error');
-                    status.style.display = 'block';
-                    
-                    if (xhr.status !== 200) {
                         document.querySelectorAll('form input[type=submit]').forEach(btn => btn.disabled = false);
                     }
                 } catch (error) {

partitions.csv

@@ -1,6 +1,6 @@
 # Name,   Type, SubType,    Offset,   Size,     Flags
 nvs,      data, nvs,       0x9000,   0x5000,
 otadata,  data, ota,       0xe000,   0x2000,
-app0,     app,  ota_0,     0x10000,  0x180000,
+app0,     app,  ota_0,     0x10000,  0x1E0000,
-app1,     app,  ota_1,     0x190000, 0x180000,
+app1,     app,  ota_1,     0x1F0000, 0x1E0000,
-spiffs,   data, spiffs,    0x310000, 0xE0000,
+spiffs,   data, spiffs,    0x3D0000, 0x30000,

platformio.ini

@@ -9,7 +9,9 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [common]
-version = "1.2.102"
+version = "1.3.58"
+
+#test
 
 [env:esp32dev]
 platform = espressif32
@@ -52,12 +54,8 @@ build_flags =
     -DCONFIG_ARDUHAL_LOG_COLORS=1
     -DOTA_DEBUG=1
     -DCONFIG_OPTIMIZATION_LEVEL_DEBUG=1
-    -DCONFIG_ESP32_PANIC_PRINT_REBOOT
     -DBOOT_APP_PARTITION_OTA_0=1
-    -DCONFIG_LOG_DEFAULT_LEVEL=3
     -DCONFIG_LWIP_TCP_MSL=60000
-    -DCONFIG_LWIP_TCP_WND_DEFAULT=8192
-    -DCONFIG_LWIP_TCP_SND_BUF_DEFAULT=4096
     -DCONFIG_LWIP_TCP_RCV_BUF_DEFAULT=4096
     -DCONFIG_LWIP_MAX_ACTIVE_TCP=16
     

scripts/update_changelog.py

@@ -122,7 +122,29 @@ def update_changelog():
                 f.write(updated_content)
             push_changes(version)
         else:
-            print(f"Version {version} already exists in changelog")
+            # Version existiert bereits, aktualisiere die bestehenden Einträge
+            version_pattern = f"## \\[{version}\\] - \\d{{4}}-\\d{{2}}-\\d{{2}}"
+            next_version_pattern = "## \\[.*?\\] - \\d{4}-\\d{2}-\\d{2}"
+            
+            # Finde den Start der aktuellen Version
+            version_match = re.search(version_pattern, content)
+            if version_match:
+                version_start = version_match.start()
+                # Suche nach der nächsten Version
+                next_version_match = re.search(next_version_pattern, content[version_start + 1:])
+                
+                if next_version_match:
+                    # Ersetze den Inhalt zwischen aktueller und nächster Version
+                    next_version_pos = version_start + 1 + next_version_match.start()
+                    updated_content = content[:version_start] + changelog_entry + content[next_version_pos:]
+                else:
+                    # Wenn keine nächste Version existiert, ersetze bis zum Ende
+                    updated_content = content[:version_start] + changelog_entry + "\n"
+                
+                with open(changelog_path, 'w') as f:
+                    f.write(updated_content)
+                push_changes(version)
+                print(f"Updated entries for version {version}")
 
 if __name__ == "__main__":
     update_changelog()

src/main.cpp

@@ -19,6 +19,12 @@
 void setup() {
   Serial.begin(115200);
 
+  uint64_t chipid;
+
+  chipid = ESP.getEfuseMac(); //The chip ID is essentially its MAC address(length: 6 bytes).
+  Serial.printf("ESP32 Chip ID = %04X", (uint16_t)(chipid >> 32)); //print High 2 bytes
+  Serial.printf("%08X\n", (uint32_t)chipid); //print Low 4bytes.
+
   // Initialize SPIFFS
   initializeSPIFFS();
 

src/website.cpp

@@ -8,6 +8,7 @@
 #include "scale.h"
 #include "esp_task_wdt.h"
 #include <Update.h>
+#include "display.h"
 
 #ifndef VERSION
   #define VERSION "1.1.0"
@@ -22,6 +23,10 @@ AsyncWebSocket ws("/ws");
 uint8_t lastSuccess = 0;
 uint8_t lastHasReadRfidTag = 0;
 
+// Globale Variablen für Config Backups hinzufügen
+String bambuCredentialsBackup;
+String spoolmanUrlBackup;
+
 void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventType type, void *arg, uint8_t *data, size_t len) {
     if (type == WS_EVT_CONNECT) {
         Serial.println("Neuer Client verbunden!");
@@ -32,6 +37,10 @@ void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventTyp
         sendWriteResult(client, 3);
     } else if (type == WS_EVT_DISCONNECT) {
         Serial.println("Client getrennt.");
+    } else if (type == WS_EVT_ERROR) {
+        Serial.printf("WebSocket Client #%u error(%u): %s\n", client->id(), *((uint16_t*)arg), (char*)data);
+    } else if (type == WS_EVT_PONG) {
+        Serial.printf("WebSocket Client #%u pong\n", client->id());
     } else if (type == WS_EVT_DATA) {
         String message = String((char*)data);
         JsonDocument doc;
@@ -160,6 +169,9 @@ void sendAmsData(AsyncWebSocketClient *client) {
 }
 
 void setupWebserver(AsyncWebServer &server) {
+    // Deaktiviere alle Debug-Ausgaben
+    Serial.setDebugOutput(false);
+    
     // WebSocket-Optimierungen
     ws.onEvent(onWsEvent);
     ws.enable(true);
@@ -363,58 +375,96 @@ void setupWebserver(AsyncWebServer &server) {
         [](AsyncWebServerRequest *request) {
             // Nach Update-Abschluss
             bool success = !Update.hasError();
+            String message = success ? "Update successful" : String("Update failed: ") + Update.errorString();
             AsyncWebServerResponse *response = request->beginResponse(
                 success ? 200 : 400,
                 "application/json",
-                success ? "{\"success\":true,\"message\":\"Update successful\"}" 
+                "{\"success\":" + String(success ? "true" : "false") + ",\"message\":\"" + message + "\"}"
-                       : "{\"success\":false,\"message\":\"Update failed\"}"
             );
             response->addHeader("Connection", "close");
             request->send(response);
             
             if (success) {
+                oledShowMessage("Upgrade successful Rebooting");
                 delay(500);
                 ESP.restart();
             }
+            else {
+                oledShowMessage("Upgrade failed");
+            }
         },
         [](AsyncWebServerRequest *request, const String& filename, size_t index, uint8_t *data, size_t len, bool final) {
             static size_t updateSize = 0;
             static int command = 0;
 
+            //oledShowMessage("Upgrade please wait");
+
             if (!index) {
                 updateSize = request->contentLength();
-                command = (filename.indexOf("spiffs") > -1) ? U_SPIFFS : U_FLASH;
+                command = (filename.indexOf("website") > -1) ? U_SPIFFS : U_FLASH;
-                Serial.printf("Update Start: %s\nSize: %u\nCommand: %d\n", filename.c_str(), updateSize, command);
+                
-
+                if (command == U_SPIFFS) {
-                if (!Update.begin(updateSize, command)) {
+                    oledShowMessage("SPIFFS Update...");
-                    Serial.printf("Update Begin Error: ");
+                    backupJsonConfigs();
-                    Update.printError(Serial);
+                    
-                    String errorMsg = String("Update begin failed: ") + Update.errorString();
+                    // Get the actual SPIFFS partition size from ESP32
-                    request->send(400, "application/json", "{\"success\":false,\"message\":\"" + errorMsg + "\"}");
+                    const esp_partition_t *partition = esp_partition_find_first(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_DATA_SPIFFS, NULL);
-                    return;
+                    if (!partition) {
+                        restoreJsonConfigs();
+                        String errorMsg = "SPIFFS partition not found";
+                        request->send(400, "application/json", "{\"success\":false,\"message\":\"" + errorMsg + "\"}");
+                        return;
+                    }
+                    
+                    if (!Update.begin(partition->size, command)) {
+                        restoreJsonConfigs();
+                        String errorMsg = String("Update begin failed: ") + Update.errorString();
+                        request->send(400, "application/json", "{\"success\":false,\"message\":\"" + errorMsg + "\"}");
+                        return;
+                    }
+                } else {
+                    oledShowMessage("Firmware Update...");
+                    if (!Update.begin(updateSize, command)) {
+                        String errorMsg = String("Update begin failed: ") + Update.errorString();
+                        request->send(400, "application/json", "{\"success\":false,\"message\":\"" + errorMsg + "\"}");
+                        return;
+                    }
                 }
             }
 
             if (len) {
                 if (Update.write(data, len) != len) {
-                    Serial.printf("Update Write Error: ");
+                    if (command == U_SPIFFS) {
-                    Update.printError(Serial);
+                        restoreJsonConfigs();
+                    }
                     String errorMsg = String("Write failed: ") + Update.errorString();
                     request->send(400, "application/json", "{\"success\":false,\"message\":\"" + errorMsg + "\"}");
                     return;
                 }
-                Serial.printf("Progress: %u/%u\r", index + len, updateSize);
+                
+                // Update OLED Display alle 5% und Webseite bei jeder Änderung
+                static int lastProgress = -1;
+                int currentProgress = (index + len) * 100 / updateSize;
+                if (currentProgress != lastProgress) {
+                    // OLED nur alle 5% aktualisieren
+                    if (currentProgress % 5 == 0) {
+                        oledShowMessage(String(currentProgress) + "% complete");
+                    }
+                    // Webseite bei jeder Änderung aktualisieren
+                    lastProgress = currentProgress;
+                    ws.textAll("{\"type\":\"updateProgress\",\"progress\":" + String(currentProgress) + "}");
+                }
             }
 
             if (final) {
                 if (!Update.end(true)) {
-                    Serial.printf("Update End Error: ");
+                    if (command == U_SPIFFS) {
-                    Update.printError(Serial);
+                        restoreJsonConfigs();
+                    }
                     String errorMsg = String("Update end failed: ") + Update.errorString();
                     request->send(400, "application/json", "{\"success\":false,\"message\":\"" + errorMsg + "\"}");
                     return;
                 }
-                Serial.printf("\nUpdate Success: %uB\n", index+len);
             }
         }
     );
@@ -442,79 +492,49 @@ void setupWebserver(AsyncWebServer &server) {
     Serial.println("Webserver gestartet");
 }
 
-void handleOTAUpload(AsyncWebServerRequest *request, const String& filename, size_t index, uint8_t *data, size_t len, bool final) {
-    static bool isSpiffsUpdate = false;
-    if (!index) {
-        // Start eines neuen Uploads
-        Serial.println("Update Start: " + filename);
-        
-        // Überprüfe den Dateityp basierend auf dem Dateinamen
-        bool isFirmware = filename.startsWith("filaman_");
-        isSpiffsUpdate = filename.startsWith("webpage_");
-        
-        if (!isFirmware && !isSpiffsUpdate) {
-            request->send(400, "application/json", "{\"message\":\"Invalid file type. File must start with 'filaman_' or 'webpage_'\"}");
-            return;
-        }
-
-        // Wähle den Update-Typ basierend auf dem Dateinamen
-        if (isSpiffsUpdate) {
-            if (!Update.begin(SPIFFS.totalBytes(), U_SPIFFS)) {
-                Update.printError(Serial);
-                request->send(400, "application/json", "{\"message\":\"SPIFFS Update failed: " + String(Update.errorString()) + "\"}");
-                return;
-            }
-            // Backup JSON configs before SPIFFS update
-            backupJsonConfigs();
-        } else {
-            if (!Update.begin(UPDATE_SIZE_UNKNOWN, U_FLASH)) {
-                Update.printError(Serial);
-                request->send(400, "application/json", "{\"message\":\"Firmware Update failed: " + String(Update.errorString()) + "\"}");
-                return;
-            }
-        }
-    }
-
-    if (Update.write(data, len) != len) {
-        Update.printError(Serial);
-        request->send(400, "application/json", "{\"message\":\"Write failed: " + String(Update.errorString()) + "\"}");
-        return;
-    }
-
-    if (final) {
-        if (!Update.end(true)) {
-            Update.printError(Serial);
-            request->send(400, "application/json", "{\"message\":\"Update failed: " + String(Update.errorString()) + "\"}");
-            return;
-        }
-        if (isSpiffsUpdate) {
-            // Restore JSON configs after SPIFFS update
-            restoreJsonConfigs();
-        }
-        request->send(200, "application/json", "{\"message\":\"Update successful!\", \"restart\": true}");
-        delay(500);
-        ESP.restart();
-    }
-}
 
 void backupJsonConfigs() {
-    const char* configs[] = {"/bambu_credentials.json", "/spoolman_url.json"};
+    // Bambu Credentials backup
-    for (const char* config : configs) {
+    if (SPIFFS.exists("/bambu_credentials.json")) {
-        if (SPIFFS.exists(config)) {
+        File file = SPIFFS.open("/bambu_credentials.json", "r");
-            String backupPath = String(config) + ".bak";
+        if (file) {
-            SPIFFS.remove(backupPath);
+            bambuCredentialsBackup = file.readString();
-            SPIFFS.rename(config, backupPath);
+            file.close();
+            Serial.println("Bambu credentials backed up");
+        }
+    }
+
+    // Spoolman URL backup
+    if (SPIFFS.exists("/spoolman_url.json")) {
+        File file = SPIFFS.open("/spoolman_url.json", "r");
+        if (file) {
+            spoolmanUrlBackup = file.readString();
+            file.close();
+            Serial.println("Spoolman URL backed up");
         }
     }
 }
 
 void restoreJsonConfigs() {
-    const char* configs[] = {"/bambu_credentials.json", "/spoolman_url.json"};
+    // Restore Bambu credentials
-    for (const char* config : configs) {
+    if (bambuCredentialsBackup.length() > 0) {
-        String backupPath = String(config) + ".bak";
+        File file = SPIFFS.open("/bambu_credentials.json", "w");
-        if (SPIFFS.exists(backupPath)) {
+        if (file) {
-            SPIFFS.remove(config);
+            file.print(bambuCredentialsBackup);
-            SPIFFS.rename(backupPath, config);
+            file.close();
+            Serial.println("Bambu credentials restored");
         }
+        bambuCredentialsBackup = ""; // Clear backup
+    }
+
+    // Restore Spoolman URL
+    if (spoolmanUrlBackup.length() > 0) {
+        File file = SPIFFS.open("/spoolman_url.json", "w");
+        if (file) {
+            file.print(spoolmanUrlBackup);
+            file.close();
+            Serial.println("Spoolman URL restored");
+        }
+        spoolmanUrlBackup = ""; // Clear backup
     }
 }